Help with explanation.

Hi!
After starting trace on listener process we received into trace file below lines ->
nsglgrDoRegister: inst loads: ld1:985 mld1:40960 ld2:451 mld2:1700
nsglgrDoRegister: inst loads: ld1:985 mld1:40960 ld2:451 mld2:1700
(we use standard prefer_least_loaded_node_<listener> = on) and in this case we have ld2:451 (instance load) and mld2:1700 (our number of sessions into init.ora file).
My question is how we can understanding mld1:40960 value into this lines.
According to pdf file of Alex. Gorbachev max node load is combination of cpu_count *5 (in our case 8*5=40) and max cpu capacity (that this parameter I can't understand).
Thanks to all and wait for answers. Thanks Staas.

basically an interpreter 'interprets' byte code, byte code is produced by 'compiling' your java progs. Byte code is a mid point between your code and executable code. Some languages are compiled into executable code, not java. Byte code is interpreted and 'rewritten' into assembly language, and then..I forgot..... I expect someone will pick me up on this! search the web on the subject compilers

Similar Messages

Need help with explanation of FRAPS to Adobe Pre Elements

Hello Everyone.
So I'm having this issue and its really holding me back. I am a complete hobbyist when it comes to editing and I'm trying to solve my issue where my fraps footage looks like garbage once imported into Adobe Pre Elements 9.
Now I wanted to get a newer version of Adobe because it seems to be a good starting place for me to get more into editing and its the only program I'm familiar with so I went ahead and bought Elements 11.
My settings are fine and I have made a post before about my issue and I have found the simplest answer I could find. but it makes no scene to me . I have no idea what a codec is and how to work these programs. I am looking for someone to explain to me what I have to do to keep my quality from fraps and import it into adobe and when its exported to actually look like its a 1080p Movie rather than what I'm having.
example movie of what the quality I have now...www.youtube.com/watch?v=8pJ8fl_g5R
I have watched a number of videos on what my settings and render out settings should be and they are correct.
This is the answer I found http://forums.adobe.com/thread/967201 Can someone explain this to me?
I am also considering XSplit is there similar problems with that recording program to with Adobe Elements?
would really appreciate a answer here rather than rummaging through threads because I am very new with the terms and end up not understanding how they solve the problem.
Thanks.

FFDShow is a "direct show" video application. Once, going back many years, Premiere (before either Elements, or the Pro versions) once used direct show for display. At about Premiere 5.0, that was changed, and Premiere began using its own display module. FFDShow is available from several sources, but many users of both PrPro and PrE have had issues with it, and it is usually tough to remove from a system. However, one trusted user and contributor here, Neale, found that FFDShow did help with some display problems on his computer, and some claim that Adobe T/S does recommend it, in some cases. Based on the problems, that so many others have encountered with FFDShow and several Adobe programs, I steer clear of it.
A video screen-cap program will capture at the computer's full screen resolution, or some portion of that, so if one has, say 1920 x 1080 for the display resolution, that will be the default capture resolution. What is stated by other posters is probably THEIR computer's screen resolution, and yours might well differ.
The HuffYUV CODEC is available free, but it is now rather long in the tooth. Many feel that the newer Lagarith Lossless, or UT Lossless, are better options, and both are free. In their cases, one would Export/Convert to MS AVI, but using the Lagarith, or UT CODEC, inside the AVI wrapper. It has been so long, since I last used HuffYUV, that I cannot recall if it was also wrapped in the MS AVI container, or not - just too long ago.
For more background on CODEC's, first see this article: http://forums.adobe.com/thread/440037?tstart=0 For even more info on CODEC's, see the link in Reply # 8.
Good luck,
Hunt

Help with explanation of "interpreter"

I have just started a course in Java so am a complete beginner. Therefore I get stuck on some questions very often. The latest one is "Explain the purpose of an interpreter". I can not seem to find anything on the basic level to answer this - it all seems to complicated at the moment.
I have gained a qualification in HTML last year, now I hope to gain one in Java.
If anyone can help me answer this question I would be very grateful.
There is not very much info out there for beginners - I have found it very difficult to find anything at all - you have to be experienced. If anyone knows of any web sites that could help me, please let me know!!

basically an interpreter 'interprets' byte code, byte code is produced by 'compiling' your java progs. Byte code is a mid point between your code and executable code. Some languages are compiled into executable code, not java. Byte code is interpreted and 'rewritten' into assembly language, and then..I forgot..... I expect someone will pick me up on this! search the web on the subject compilers

The best way to get help with logic

I was posting in a thread on support for logic which appears to have been deleted. anyway, what I was going to say I think is useful info for people, so I'm going to post it anyway. to the mods - it doesn't contain any speculation about policies or anything like that. just an explanation of my views on the best way to deal with issues people have with logic, which I think is a valuable contribution to this forum.
I think there's a need for perspective. when you buy an apple product you get 90 days of free phone support to get everything working nice and neat. you can call them whenever, and you could actually keep them on the phone all day if you wanted, making them explain to you how to copy a file, install microsoft office, or any number of little questions no matter how simple - what is that red button thingy in my window for?.. on top of that, you've got a 14 day dead on arrival period (or 10 days I can't remember) in which if your machine has any kind of hardware fault whatsoever it's exchanged for a totally new one, no questions asked. a lot of people complain that applecare is overpriced.. and if you think of it just as an extended warranty, then it is a little pricey. but if you are someone that could use a lot of phone support, then it's actually potentially a total bargain. the fact that 2 or more years after you bought a computer, you could still be calling them every single day, asking for any kind of advice on how to use anything on the machine, is quite something. many people on this forum have had problems when they made the mistake of upgrading to 10.4.9 without first creating a system clone or checking first with their 3rd party plug in vendors to make sure it was ok. so, with apple care, you could call them and keep a technician on the phone _all day_ talking you through step-by-step how to back up all of your user data, how to go through and preserve your preferences and any other specific settings you might not want to lose, and then how to rollback to an earlier OS version.. they'll hold your hand through the whole thing if you need them to.
as for applecare support for pro apps like logic, I'd be the first person to agree that it's not great for anyone except beginners and first time users. if you look at what it takes to get even the highest level of logic certification, it's all pretty basic stuff. and logic doesn't exist in a vacuum, there is an entire universe of 3rd party software and hardware, as well as studio culture and advanced user techniques that are going to be totally invisible to some poor phone support guy at apple that did a logic 101. but it's not hard to see that apple are trying to promote a different kind of support culture, it's up to you to decide whether you want to buy into it or not.
the idea is that they are able to provide basic setup support for new users, including troubleshooting. because it's a simpler level of support, at least they can do this well. so there's no reason why any new user with say a new imac and logic can't get up and running with the 90 days of phone support they get for free.
but the thing is, for extremely high end pro users it's a different matter altogether. pro use of logic within the context of say, a studio or a film composition scenario is a very different world. it's almost a nonsense to imagine that apple could even hire people capable of giving useful support for this end of the spectrum, over the phone. there are so many variables, and so many things that require a very experienced studio person or in-work composer to even begin to understand the setup, let alone troubleshoot it. and it's a constantly evolving world, you actually have to be working in it and aware of developments on 3rd party fronts as well as changes in hardware.. not to mention even changes in the culture of studio production and the changed expectations that come from that. there's no way some poor little guy sitting at a help desk at apple can even hope to be privy to that kind of knowledge. it's already good enough that they don't outsource their support staff to india, let alone go out to studios and hire the very people with the skills that should be staying in the studio! not answering phones for apple.
so, given this reality.. companies have two choices. they can either offer an email based support ticket system, which others do. but in my opinion.. this can just be frustrating and only a half-solution. sure you 'feel' like you are getting a response from the people that make the software and therefore must know it.. but it's not really the case due to what I said above. DAWs don't exist in a vacuum, and so much of what you need to understand to help people requires an intimate knowledge of the music industry in which they are working. you still won't get that from steinberg, even if they sort of answer your emails. the other problem is that this kind of system can mean sporadic answers, a lot of tail-chasing, and quite often you won't get an answer that helps you in the end anyway.
the other model is to foster a strong user support culture. some people react in the wrong way to this idea.. they just think it's a big brush off from the manufacturer, saying we don't care, go sort it out yourselves.. but this isn't true. apple has a classification for pro resellers called 'apple solutions expert - audio'. what this means is that these dealers are recognised as audio specialists and they can receive extra support and training from apple for this. but more importantly than this.. most of them are music stores, or pro gear dealerships that are also mac and logic dealers. they already employ people that have worked or do work in the music industry, and are constantly on top of all of this stuff. apple encourages these dealers to run workshops, and to provide expert sales advice in the very niche area that logic is in, which they can do far better than some generic apple store ever could. but most importantly, they are encouraged to offer their own expert after-sales support and whatever other value-adding expertise they can, to get sales. because margins in computer gear are so tight nowadays, discounting is not really a viable option for these dealers to guarantee getting musicians to buy computers and logic setups from them. the only companies that can entice people with a lower price a big online wholesalers or big chain stores. so the best idea for these niche expert stores to get sales is to offer you their own experts to help with configuration, ongoing support and to generally make it a better idea that you bought your system from them rather than from some anonymous online store. I can see the wisdom of this.. it puts the support back out there on the ground where it's needed, and also where it can work best. apple could never hope to offer the same level of expertise in helping a film composer work through some issues with a specific interface or some highly specific issue they have with getting a task done. no big software manufacturer could do this anywhere near as well as people out there that have worked in studios or currently do work in studios. so in my opinion it's a far better model to foster this kind of support culture, along with training courses, books and training video support. also user forums like this one are possibly one of the most valuable ports of call anyone could ask for. apple couldn't replicate this with their own staff, even if they tried. and even if they made a system where some of the people close to logic development were able to answer emails, it would still be nowhere near as useful, as rapid or as capable of being up to speed with logic use out in the real world with 3rd pary gear, as any of these other methods are.
the only thing I think they could do better would be to publish a list of known bugs which are officially recognised. this would help everyone and put an end to a lot of wasted time and speculation on if something is a bug totally to do with logic, or if it's a specific issue raised by a particular configuration.
but really, in my view, a 3rd party support and training culture through a combination of specialist dealers, consultants that literally run a business setting up computers for pro-users and helping them keep it all working, online user-to-user forums and published materials really are the way forward.

In all honesty this is currently the 3rd "logicboard" (motherboard)
in my powerbook due to a design flaw regarding the 2nd memory slot....
Yep. Mine failed five weeks after I bought it. However, I bought it for work and couldn't afford being without it for four weeks while they fixed it, so I had to live with it. My serial number did not entitle me to a replacement either, post Applecare.
My firewire ports have burnt out from a third-party defective device (no hot-plugging involved)
My screen is blotchy (my PW serial number did not entitle me to a replacement).
My battery serial number did not entitle me to a replacement, and is not that good these days.
My guaranteed Powerbook-compatible RAM is actually not, causing RAM related problems, most notably these days meaning that as soon as I switch to battery power, the laptop crashes, so I can only use mains power. The company I bought it from stopped taking my calls and wouldn't replace it after they replaced it once, so I'm stuck with it. And of course, only one ram slot is working, so I can't even use my original stick in the first slot, which would shift the dodgy stuff away from the lower system area.
My power supply failed at the weak spot and caught fire. I managed to break apart the power supply and recable it so I didn't have to buy a new power supply, although the connection at the laptop end is loose (all the more fun that as soon as power is lost, the laptop crashes - see above). The power supply is held together with gaffa tape. Silver gaffer tape though, so it's still kind of 'Appley"...
My internal hard drive is dying - four or five times now it clicks and won't power up, causing the laptop to die.
One foot has fallen off (but glued back on).
The lid is warped.
The hinge is loosish.
The S-Video adaptor cable is intermittent.
But aside from all that, I have looked after it well, and I love it to death. Just as well, because it doesn't look like it will be that long...
But it still "just works". Apart from the battery power obviously. And the ram slot. And the ram. And the screen. And the hard drive. And the firewire ports. And the feet.
But everything apart from the main board, the screen, the case, the hard drive and the power supply works fine. So thats... er..
Hmm.

Help with GR/IR, can't clear on MR11

Please help with this case:
We had a purchase with delivery cost included. We create MIGO with no problem. (Credit to GR/IR account = $60)
We cancel the delivery cost in MR11. (Debit to GR/IR Account = $60)
After a few months, we restore Delivery Cost in MR11SHOW (Credit to GR/IR account = $50)
Create MIRO to freight vendor in MIRO (Debit to GR/IR account = $60)
As you may see, now can't clear GR/IR account because there's a difference (60 vs 50) and can't use MR11 neither, I get this error:
No data selected. Check selection parameters!!
Message no. CKMLGRIR009
I have tried with so many post, but can't find anything that works....
Thanks in advance!

Hi Mohsin.
After we cancel the delivery cost with MR11 (let's say, in January) the freight vendor asked us for his payment (in April) and then we realised that we need to restore the delivery cost...
What we did is cancel the MR11 document that we had created before... and there's when the difference in GR/IR was generated.....
I hope that this comments makes a little bit clearer my explanation.
Thanks

Windows Server 2008 R2 with multiple Roles OS Rebuild, Need help with Certificates.

Hi,
I have rebuilt a Server for my client and I require help with certificates..
I am unsure exactly what to do to get this server working as it was.
Example, The Windows Server 2008 R2 has Microsoft Exchange, DNS, DHCP, ADDS, FileServices,Network Policy and access Services and Webservices roles installed on a single box.
Since the Server OS Rebuild I am getting 2 issues that pop up usually when Outlook in opened on a client Workstation,
I have not dont anything certificate wise to the server since OS Install, and the messages I get and best described here
I seen on a backdrive, a few certificate files I dont know if we can use these files for anything but we have the following files of drive E (Backup)
e:\server.xxxx.com.au\gd_iis_intermediates.p7b
e:\server.xxxx.com.au\server.xxxx.com.au.crt
e:\ssl\2013-2018.cer
1st Message is about a Proxy certificate I dont get this often but saw it today and my client clicked ok too quickly.
I have seen it and didnt see it again after trying to close outlook and reopen
I looked up google images and tried to find it...
It's like this, (There is a problem with the proxy server's security certificate.
The security certificate is not from a trusted certifying authority.)
2nd Message is about Security Alert, Autodiscover.xxxx.com.au Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-X- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceed
[Yes][No][View Certificate ...]
3rd Message is very Close to the 2nd Message, is about Security Alert, xxxx-server.xxxx.local, Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-TICK- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceded
[Yes][No][View Certificate ...]
If you can help guide me thou this as I'm very new to setting up certificates. I had a friend tell me about something in DNS.. but he has been super busy and I want to learn what to do.
Thank-You.

Hiya,
quite a lot has the same confusions as you do, so I've written a simple explanation on the subjet of certificates
http://jesperarnecke.wordpress.com/2014/03/22/certificates-simple-explanation/
Let me know if that helps you and if you need further assistance.

Need help with recovery!

Hello, I have a problem, my model is HP Pavilion dv7 6051er.
After reinstalling the OS team got off F11-recovery.
I can not find a solution to your problem, see "Support & Drivers" can not find any software patches that could, would solve my problem. A hard drive intact.
Please help with the decision of the key problems.
thanks in advance

Can't understand this. Try again with a little more explanation of the problem.

NEED HELP WITH BUTTONS IN AS3!!

Hello, I am stumped with an action scripting problem. I'm
trying to create a really basic website in flash using buttons to
jump from scene to scene. Let's say I want to do something as
simple as make scene 1 jump to scene two right? I'll place in my
scene 2 button on my first page:
But instead of the scene changing to the next scene after I
press the button, these errors come up!!
1180: Call to a possibly undefined method on.
1120: Access of undefined property release.
1120: Access of undefined property _root.
I've tried asking in so many different forums, I usually do
pretty good with action scripting for buttons. But this is my first
time doing it with cs3. I'm utterly confused, someone please help!!
Thank you.
The code on this page is the code I was using to try to
change scenes...Oh! and whenever I try to put a code in the actual
button, it won't let me. I just get a message that says something
like "Can't have any actions applied to it".

foxxpop,
> But instead of the scene changing to the next scene
> after I press the button, these errors come up!!
>
> 1180: Call to a possibly undefined method on.
> 1120: Access of undefined property release.
> 1120: Access of undefined property _root.
You're using three terms that aren't supported in
ActionScript 3.0: the
on() function, the release parameter to that function, and
_root. In
ActionScript 3.0, you'll have to give your button an instance
name and wire
it up like this:
http://www.quip.net/blog/2007/flash/making-buttons-work-in-flash-cs3
In that blog entry, you'll see (with explanation) something
that looks
like this:
myButton.addEventListener(
MouseEvent.CLICK,
function(evt:MouseEvent):void {
trace("I've been clicked!");
Just bear in mind that you can also make that a named
function, like
this:
myButton.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
trace("I've been clicked!");
> I've tried asking in so many different forums, I usually
do
> pretty good with action scripting for buttons. But this
is
> my first time doing it with cs3.
Your issue isn't Flash CS3, it's that your FLA file is
configured for
ActionScript 3.0. If you change that to AS2, you can go right
on using the
same approach you used to -- and you'll be able to attach
code directly to
objects. ;)
David Stiller
Co-author, The ActionScript 3.0 Quick Reference Guide
http://tinyurl.com/2s28a5
"Luck is the residue of good design."

Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
Thanks much.
Emile

Choose Force Quit from the Apple menu and close Mail from there.
(103661)

Help with photo albums Please

Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx

The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.

Plz help with scripting in adobe....urgent

Hi,
I have a requirement to display two company codes on two different master pages depending upon the company code .Here company code is the input .Shall i use scripting here or we can handle in print program.
as i am new to this adobe ,i want to know about ,
1.How to use CONDITIONS.
2.KEYWORDS.
3.GIVE ME A SAMPLE CODE WITH EXPLANATIONS.

Hi
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji

Help with using a web page from disk after saved from web

Hi, I almost forgot the little I learned about web page development, so, I'm a total noob when it comes to this and I need your help.
I saved as a complete web page on my hard disk this web page but when I open it in Firefox or IE, it doesn't display as much as I need it. I'm mostly interested in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.
I will greatly appreciate your help with this.

I'm sorry, but your post is very confusing
I saved as a complete web page on my hard disk this web page
Does this include site definitions?
when I open it in Firefox or IE, it doesn't display as much as I need it.
I dont know what this means...are there images that are not being displayed? Is there styling that is not being rendered?
. I'm mostly interested in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away.
Again, I dont know what this means?
I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.I will greatly appreciate your help with this.
Do you have a link to the page, and perhaps some explanation that is more clear as to what your issue is.
Gary

Help with simple addition formcalc issue

I know just enough to be dangerous. I'm trying to get a row in a table to add up and appear in a separate subtotal box. The error I get is "accessor amount [*] unknown." I am working from the invoice template, but I had to refigure the box after some issues. I am using the formula that appeared in the previous subtotal box, but I know I'm not referencing the table row properly.
Each amount box has been given a name (amount1, amount 2, etc) in the binding box and the subtotal box formula I used (throught formcalc) is form1.#subform[0].Subtotal::calculate - (FormCalc, client)
Sum(Table1.Row1-15.amount[*])
and
Sum(amount1, amount2, amount3, amount4...) (listing all the amount names up to 15)
I also tried Sum(amount[*]) as the previous template did and it wouldn't work. The Subtotal box grouping is straight from the Invoice Template, not created from the table. I know I am missing something pretty basic with heirarchy, but I don't know enough about scripting to figure this out. Any help (and explanation of what I did wrong) would be greatly appreciated. Thanks!

The accessor [*] is only used for objects with the same name, that occur once or more.
If you have 5 fields "Amount" in one row named "Row1" then the reference syntax is
Table1.Row1.Amout[0], Table1.Row1.Amout[1] ... Table1.Row1.Amout[4].
To summarize those fields you use: Sum(Table1.Row1.Amout[*])
If you have 5 rows named "Row1" and each row has one field "Amount" then the reference syntax is:
Table1.Row1[0].Amout, Table1.Row1[1].Amout ... Table1.Row1[4].Amout
To summarize those fields you use: Sum(Table1.Row1[*].Amout)
Both examples only work if the object that is repeated has always the same name!

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Kindly send me some Objects with explanation If u have

Hi all,
I am Santosh .. I am new to this group .. I am in US with H1 .. I am looking for a job in SAP ABAP ..
Kindly any one of you guys send me important interview tips and ansewrs as i am dam new to everything including the place...
And one more thing please send me the Objects with explanation to explain in the interview..
Kindly help me out yaar to get a job ... Plzzzzz
Thanks a lot
Santosh

Hi
for some ABAP technical information check this out,
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
then PDF files, AbapProgramimg,
regards,

Help with explanation.

Similar Messages

Maybe you are looking for