Help with my current hardware configuration for primere pro

Earlier this year I built a computer for video editing, I thought it was a decent build till I start running in to problems with render speeds, media pending for minutes after I open a project, playback issues etc. After reading post from multiple forums I realized build an editing rig a different type of beast and I need help to get the best out of my hardware
This is my current hardware
Intel I7-4770k
Asrock Z87 Extreme4 Intel ATX motherboard
MSI GTX 660 Twin Froz III Overclocked
Crucial Ballistix Sport 16gigs DDR3-1600
EVGA Supernova 750watt bronze power supply
Hard drives-
C drive - 2 tb Seagate 7200rpm
D drive - 1.5 tb Seagate 5400( I think, it only read and write around 65mb)
F drive - 2 tb Seagate 7200rpm
I use adobe pp cc, after effects cc, Photoshop cc and want to use Speed grade in the near future.
I mostly edit AVCHD and dslr footage
Any suggestion would greatly be appreciated. I know my hard drives are not the best configuration. I want to redo that with a solid state and a couple of new hard drives.
Please let me know if any other of my components could be slowing down my computer.
also will my system run better with a internal or external raid configuration

A Moderator may come along and move this to https://forums.adobe.com/community/premiere/hardware_forum where there are hundreds of discussions
Until then, go to the Tweakers Page and read everything

Similar Messages

  • Help With Multimedia Audio Controller Driver For XP Pro

    Hello,
    Please help!!!
    I am trying to locate the Multimedia Audio Controller Driver for XP Pro for an MSI 645 ULTRA (A6547MS) Motherboard.  The audio device is integrated into the motherboard and Windows XP Pro is not recognizing the device.
    I have tried looking at MSI Support Website but am unable to identify which is the correct driver package to use.  
    I would also like to know if there are any related WinXP Supplement driver package needed for this motherboard.

    Did you do a clean installation of XP or you only use the upgrade function?
    I recommend you to do clean installation if you didn't.

  • I want to set-up a network with our current two laptops for a family of 4 w/unique 4 profiles. I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e.mail/facebook). How best can I do this?

    I want to set-up a network with our current two laptops for a family of 4 with unique 4 profiles.  I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e. mail/facebook).  How best can I do this?

    iCloud Photo Sharing FAQ - Apple Support
    http://www.fatcatsoftware.com/iplm/Help/accessing%20an%20iphoto%20library%20on%2 0another%20mac.html

  • Hardware configuration for BI 7 Cleint

    Hi All,
    What is the minimum hardware configuration for BI 7 Client installation?
    user will use a BEx for the report analysis
    Regards,
    Godhuli

    Hi ,
    The note is currently for internal checking as it has undergone some internal checking.I am just pasting the note info in this reply.
      The Business Explorer of SAP NetWeaver 2004s is supported for the Win XP and win2000 platforms. The hardware and software requirements under the different platforms are given below.
    software requirement for Windows XP
       OS    : Windows XP
       Browser : IE 6.0
       Excel : 2002 and 2003
    software requirement for Windows 2000
       OS    : Windows 2000
       Browser : IE 6.0
       Excel : 2002 and 2003
    .Net Framework version 1.1 is a pre-requisite for the Business Explorer  of SAP NetWeaver 2004s in both the platforms. It's a freeware, which can  be downloaded from the Microsoft site.
    Older versions of Microsoft Excel, for example Microsoft Excel 97 and 2000, are not supported. On the browser side Firefox is not supported at present.
    Hardware used in this case is Pentium 4, 2.8 GHz,1 GB memory and 40 GB HDD. The Hard disk space and Min and recommended Memory usage for the Business Explorer of SAP NetWeaver 2004s is mentioned below
        HDD Space   : 380 MB
        Memory Min  : 384 MB
        Recommended : 512 MB
    Note: The actual memory used under Windows XP platform is 146 MB.The amount of memory used by OS before SAP GUI installation is 137 MB The amount of memory used by OS after SAP GUI installation is 283 MB
    (256 MB is still sufficient for XP, but sometimes when SAP GUI is executed the system may start swapping)
    you can also check service.sap.com/bi->Product Information SAP NetWeaver 7.0 - BI
    Best Regards
    Manoj Kumar

  • Need hardware configuration for server

    Hi All,
    Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
    Thanks,
    ATRSAMS

    Hi Atrsams,
    According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
    Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
    http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
    http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
    Regards,
    Charlie Liao
    TechNet Community Support

  • I need help with setting up time machine for backup

    I would like help with setting up time machine for backup.

    You will need an external hard drive (formatted for a Mac).
    Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
    The backups are automatic.
    Barry

  • Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my SL

    Hi...Im in needs of help in my new OS Mac World.Had my Logic Pro 9(9.0.2) install in my Snow Leopard(10.6.3).Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my Snow Leopard.Just a real basic audio interface that works with my Macbook pro Specification.You're help will be much more appreciated..
    Best Regards:RatzyMazzy

    In any case I would suggest to get an audio interface which is *Core Audio* compatible. This means that you just need to plug it in and it will work with OS X’s integrated driver. I once had an M-Audio interface which needed its own driver and it had latency problems because of them. I am currently using the EDIROL FA-66 with 10.6.3 on my MacBook Pro. It still works flawlessly and has worked without problems in the past with 10.4 and 10.5, too. Here is how it looks like: http://www.rolandus.com/products/productdetails.php?ProductId=731
    I have also heard good things about the FireWire interfaces from Presonus, like the FireBox.
    Björn

  • Need help with my iPhone 5 and my Macbook Pro.

    Need help with my iPhone 5 and my Macbook Pro.  I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5.  Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac.  Can anyone help me with that ??....
    iPhone 5, iOS 6.0.1

    You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

  • Which is the optimal hard drive configuration for Logic Pro ?

    hello people
    i would like to ask your advices about possible hard drive configurations for Logic Pro
    I have a Mac Pro and thinking to buy 4 x 500GB drives .
    there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
    model 1 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
    which means to using 4 hard drives as 2 drives
    model 2 :
    1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
    1 Single drive for Sound banks (500)
    1 Single drive for Recording (500)
    which means to using 4 hard drives as 3 drives
    Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
    and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
    I am kinda rookie for these subjects :/
    thanks in advance

    heelo blayzay
    thanks for the reply and assistance.
    1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
    2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
    For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
    thank you again.

  • Help with a simple 1811 configuration

    I have a very basic level of understanding with Cisco products and I need help with what should be simple and even doable by me.
    I have a Cisco 1811 integrated router and am simply trying to use it on my home network.  I can configure the router with an enable secret password, password encryption, VTY, aux, and cons logins with no issues.  The router has 2 Ethernet interfaces, 0 and 1 and 8 switch ports.
    The idea is to bring Comcast ISP service into one of the Ethernet ports and then have three machines on the switch ports able to access the Internet.  Also I have an off-the shelf wireless router that I thought I would just plug that into an available switch port and allow a wireless AP as well. 
    This is so simply, that I can't believe I can't figure it out, but I can't.
    I set int F1 to DHCP, performed a 'no shut', and connected the ISP's router and have an up and up indication.  I have setup a static network with my three machines on the switch ports and enabled all applicable ports and have up and up indications - however, no traffic flow, even amongst my static Layer 2 switched LAN - not even a 'ping'.  By my understanding of Layer 2, this should work right now, whether the ISP service is working or not - WHAT AM I DOING WRONG?
    The addressing scheme I have ended up on is 172.16.1.0/28
    Obviously without the first hurdle cleared, of why the switched LAN doesn’t work, I haven't got any deeper.  Do I need to configure NAT?  I don't think I would need to in the scenario right?
    All of my experience, and none at the CCNA level, has been with larger Cisco equipment.  One thing I noticed on the 1811 was that when trying to create a new VLAN, it appears to work yet does not do anything and the 'sh vlans' output returns nothing, not even the VLAN1 I can see with 'sh ip int brief". 
    Anyway, if anyone has time to help a newbie out I would appreciate it; I’m lost.
    Thanks,
    Josh

    Thanks for the help Andrew!  You know, I think if this was two separate devices (switch and router) I think I would be up and running, but this integrated stuff is throwing me off, not to mention that the IOS is a much older version (I guess) than what I'm used to. 
    They were throwing this 1811 in the trash can at work, so I just emptied the trash can.  I have no documentation at all but I have since found the 1800 series documentation on Cisco.com and have tried to implement the basic configurations cited; with what seems like success, but still no joy.  I did have to recover the password and did so with 0x2142, I bypassed the setup and compared the default configuration with what is listed in the documentation and they DO NOT match; I also tried to go through setup mode with the same indications.  Additionally I've also learned that the 1800 series is pre-configured on certain options (DHCP, VLAN), which is new to me - I thought Cisco routers were not configured by default - isn't that kind of the point?  (By the way, the below port status may not be correct since I now have all the ports unplugged)
    Anyway, here is the 'show run' command, the 'sh ip int brief' command, followed by the 'sh version' command:
    Show Run
    Casino#sh run                                                                 
    Building configuration...                                                     
    Current configuration : 2006 bytes                                            
    version 12.4                                                                  
    service timestamps debug datetime msec                                        
    service timestamps log datetime msec                                          
    service password-encryption                                                   
    hostname Casino                                                               
    boot-start-marker                                                             
    boot-end-marker                                                               
    enable secret 5 $1$meWw$nsMTp6US7axi/uE0MWULK.                                
    enable password 7 06535E741C1B584C55                                          
    no aaa new-model                                                              
    ip cef                                                                        
    no ip dhcp use vrf connected                                                  
    ip dhcp excluded-address 172.16.1.1                                           
    ip dhcp pool Casino                                                           
       import all                                                                 
       network 172.16.1.0 255.255.255.240                                         
       default-router 67.165.208.1                                                
       dns-server 68.87.89.150                                                    
       domain-name hsd1.co.comcast.net                                            
    no ip domain lookup                                                           
    ip domain name GinRummy.localhost                                             
    ip name-server 68.87.85.102                                                   
    ip name-server 68.87.69.150                                                   
    ip auth-proxy max-nodata-conns 3                                              
    ip admission max-nodata-conns 3                                               
    multilink bundle-name authenticated                                           
    archive                                                                       
    log config                                                                   
      hidekeys                                                                    
    interface Loopback0                                                           
    ip address 172.16.1.1 255.255.255.240                                        
    interface FastEthernet0                                                       
    no ip address                                                                
    shutdown                                                                     
    duplex auto                                                                  
    speed auto                                                                   
    interface FastEthernet1                                                       
    ip address dhcp                                                              
    ip nat outside                                                               
    ip virtual-reassembly                                                        
    duplex auto                                                                  
    speed auto                                                                   
    pppoe enable                                                                 
    pppoe-client dial-pool-number 1                                              
    interface BRI0                                                                
    no ip address                                                                
    encapsulation hdlc                                                           
    shutdown                                                                     
    interface FastEthernet2                                                       
    interface FastEthernet3                                                       
    interface FastEthernet4                                                       
    interface FastEthernet5                                                       
    interface FastEthernet6                                                       
    interface FastEthernet7                                                       
    interface FastEthernet8                                                       
    interface FastEthernet9                                                       
    interface Vlan1                                                               
    no ip address                                                                
    ip nat inside                                                                
    ip virtual-reassembly                                                        
    interface Dialer0                                                             
    ip address negotiated                                                        
    ip mtu 1492                                                                  
    encapsulation ppp                                                            
    dialer pool 1                                                                
    ppp authentication chap                                                      
    ip forward-protocol nd                                                        
    no ip http server                                                             
    no ip http secure-server                                                      
    ip nat pool Casino 172.16.1.2 172.16.1.14 netmask 255.255.255.240             
    ip nat inside source list 1 interface Dialer0 overload                        
    access-list 1 permit 172.16.1.0 0.0.0.15                                      
    dialer-list 1 protocol ip permit                                              
    control-plane                                                                 
    line con 0                                                                    
    password 7 080E5916584B4442435E5C                                            
    login                                                                        
    line aux 0                                                                    
    password 7 013C135C0A59475A70191E                                            
    login                                                                        
    line vty 0 4                                                                  
    password 7 09635B51485756475A5954                                            
    login                                                                        
    end                                                                           
    Show IP Interface Brief
    Casino#sh ip int brief                                                        
    Interface                  IP-Address      OK? Method Status                Prl
    FastEthernet0              unassigned      YES NVRAM  administratively down do
    FastEthernet1              unassigned      YES DHCP   up                    do
    BRI0                       unassigned      YES NVRAM  administratively down do
    BRI0:1                     unassigned      YES unset  administratively down do
    BRI0:2                     unassigned      YES unset  administratively down do
    FastEthernet2              unassigned      YES unset  up                    do
    FastEthernet3              unassigned      YES unset  up                    do
    FastEthernet4              unassigned      YES unset  up                    do
    FastEthernet5              unassigned      YES unset  up                    do
    FastEthernet6              unassigned      YES unset  up                    do
    FastEthernet7              unassigned      YES unset  up                    do
    FastEthernet8              unassigned      YES unset  up                    do
    FastEthernet9              unassigned      YES unset  up                    up
    Vlan1                      unassigned      YES NVRAM  up                    up
    Loopback0                  172.16.1.1      YES manual up                    up
    Dialer0                    unassigned      YES manual up                    up
    NVI0  
    'show version'
    Casino#sh ver                                                                 
    Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15))
    Technical Support: http://www.cisco.com/techsupport                           
    Copyright (c) 1986-2008 by Cisco Systems, Inc.                                
    Compiled Thu 24-Jan-08 13:05 by prod_rel_team                                 
    ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)           
    Casino uptime is 52 minutes                                                   
    System returned to ROM by reload at 17:09:25 UTC Fri Jul 1 2011               
    System image file is "flash:c181x-advipservicesk9-mz.124-15.T3.bin"           
    This product contains cryptographic features and is subject to United         
    States and local country laws governing import, export, transfer and          
    use. Delivery of Cisco cryptographic products does not imply                  
    third-party authority to import, export, distribute or use encryption.        
    Importers, exporters, distributors and users are responsible for              
    compliance with U.S. and local country laws. By using this product you        
    agree to comply with applicable laws and regulations. If you are unable       
    to comply with U.S. and local laws, return this product immediately.          
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html                        
    If you require further assistance please contact us by sending email to       
    [email protected].                                                             
    Cisco 1812 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m.
    Processor board ID FHK120622J3, with hardware revision 0000                   
    10 FastEthernet interfaces                                                    
    1 ISDN Basic Rate interface                                                   
    31488K bytes of ATA CompactFlash (Read/Write)                                 
    Configuration register is 0x2102  
    Thanks again for your help,
    Josh

  • Need some help with WM and gkt configuration

    Hello everybody.
    I've installed Arch Linux few days ago and currently I'm having a problem with gtk apps. It's the classic problem that they look ugly under fluxbox, my WM. I've tried to put this on ~/.xinitrc:
    exec fluxbox
    # load this to have gtk2 apps look ok
    GSDPID=`pidof gnome-settings-daemon`
    if [ "x$GSDPID" == "x" ]; then
    gnome-settings-daemon &
    fi
    or:
    # load this to have gtk2 apps look ok
    GSDPID=`pidof gnome-settings-daemon`
    if [ "x$GSDPID" == "x" ]; then
    gnome-settings-daemon &
    fi
    exec fluxbox
    And nothing happened. I'm sure it's an easy issue to solve, but I'm stuck here with this. Thank you for reading and thank you for your help.
    EDIT: I still have some time to lose on my laptop so can you recomend me which minimalist WM is better??
    Last edited by xlasttrainhomex (2008-10-05 11:49:15)

    I highly recommend Openbox. It doesn't provide you a panel like Fluxbox does, so you'll need to find yourself a panel - if you're lost for choice I can recommend tint2 and bmpanel as starters.
    Anyway, Openbox has session configurations for both GNOME and KDE, meaning that while GNOME will be sitting under all your applications, will try to manage your desktop, will try to launch panels, etc etc etc, Openbox will be managing your windows, and you can turn off whatever you don't want anyway - I have a highly configured, customized Openbox setup that gives me no indication except in my process listing that I'm using the GNOME session manager: the splash is disabled, Nautilus doesn't try to manage my desktop, I have no GNOME panels, and so on.
    -dav7

  • Need help with a currently "in-use" form we want to switch to Adobes hosting service

    Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of.  I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our  "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit"  issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
    We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
    I need to get this right and working for the majority of my users and on any platform and OS.
    You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
    (and you will probably get right to me, unlike my and I'm sure most other folks',  "Adobe phone-in experiences")
    Thank You,
    Michael Corman
    VinylCouture
    Phenix City, Alabama  36869

    Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
    So  I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself,  I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products"  to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
    OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi  & so on)...and if you are still on my site.. go to any  "GO RIGHT TO OUR ORDER PAGE"  button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is,  how do they select their individual colors within that (whatever) pack?... .
    So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a  " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
    So after thinking this all out,  and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
    Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year,  I think...its called http://pdf-fillableforms.com/.
    A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however,  if you're on MAC OSX or similar...
    I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
    OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending"  with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly,  and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add)..,  except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form....  Many folks report to us the following issues that we know of.  First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
    Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
    It almost always generates some kind ( at least one time)  of "error message" which we do warn them about..., telling one,  basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it...  and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
    Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly,  the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4)  If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
    Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that?  Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
    Michael Corman
    VinylCouture.com
    (706) 326-7911

  • Specific Hardware Configuration for a new ATG Project

    Hi All,
    We're going to setup a new ATG Project in my organisation with ATG 10.
    Can you please suggest me the best Hardware configuration to setup new project?
    Thanks & Regards,
    Narasimha Rao D.

    Hi,
    I am not able to figure out which version is jboss-eap-5.1\jbosss.
    Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
    for ATG versions mentioned below
    1)9.3 which version of jboss to use ???
    2)10.0.2 which version of jboss to use ???

  • A reasonable hardware configuration for Linux OAS

    Has anyone out there tried to run
    Oracle 8 for Linux and OAS 3.02
    all on the same toasted PC/pentium server?
    Could you tell me the nature of your
    hardware configuration (processor speed, ram, etc)
    if you feel the performance is acceptable for
    development (not for actual business operation).
    The technical FAQ lists 48 megs and any
    Pentium to run Oracle 8 for Linux which
    verges on ridiculously low.
    I just want to know a reasonable
    configuration to run both Oracle 8 and OAS .
    Thanks,
    Heji
    null

    I have been runnig OAS/O8 on a Pii/300Mhz system with 128mb of
    ram, and so far I have no real complaints on speed. I even tuned
    the SGA to give a little better performance and still have around
    40 or so MB free. BTW, I haven't really tried to mess around
    with the Linux version of OAS, but have used the Solaris version
    previously, have you noticed any problems with the wrb starting
    up? I have seen some error messages saying "No processes..." or
    something, looks like an error.. have you experienced this?
    Tom Tyson
    mark theodoras (guest) wrote:
    : Heji (guest) wrote:
    : : The technical FAQ lists 48 megs and any
    : : Pentium to run Oracle 8 for Linux which
    : : verges on ridiculously low.
    : The install guide says 32M minimum for O8. I'm not sure with
    : OAS. Given (pc) memory is cheap, I am running O8/OAS3 with
    128M,
    : with no complaints.
    : Given laptop memory is not so cheap, are there folks running O8
    : and OAS3 with 48, 40, or less ram ????
    : I can second any pentium would suffice. I am using P133 & P166
    : systems, and the CPU is NOT the bottleneck.
    : Mark
    null

  • Best Hardware Configuration for oracle RAC

    Hi,
    iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
    I can spend a reasonale amount.
    This is for homesetup,implementation and practice all major activities that's all.
    So please provide me a nice coniguration.
    Iam planning to install vmware server and create multiple instances in the same server
    Please provide me a nice configuration which suits for implementing installing vmware server
    Thanks,
    Aram
    Edited by: aram on Sep 23, 2011 8:08 AM

    aram wrote:
    Hi,
    iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
    I can spend a reasonale amount.
    This is for homesetup,implementation and practice all major activities that's all.
    So please provide me a nice coniguration.
    Iam planning to install vmware server and create multiple instances in the same server
    Please provide me a nice configuration which suits for implementing installing vmware server
    Thanks,
    Aram
    HI,
    For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
    From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
    Cheers

Maybe you are looking for