Help With My Setup...

I Hope I'm in the right forum, If not let me know where this post should go.
Thanks for helping me out. I have some questions regarding my setup and acquiring new gear. Currently, I have a the following setup:
IMac - newer model
Logic Pro 9
Numark tt-usb turntable
Stanton DJ mixer
Pair of Yamaha HS80 monitors
MPD 24
I would like to add a keyboard controller (I'm thinking of the new Korg Microsampler). Basically, I'm willing to get the microsampler as long as it can Fully function like a controller, which can control logic synths & plug-ins(axiom, mpk, etc.) and as well as it's own features. Furthermore, I would like to to be able to record from my turntable to logic and into the microsampler. I understand I would need an interface. Would I still need the mixer? Would the M-Audio Firewire Solo work with my setup?
Would a control surface take place of an Interface?
I am possibly interested in getting a control surface that works good within logic. I was looking at the Euphonix MC Control, it seems to work great with logic. Is there an cheaper alternative? Also, I would like it to be user friendly, I am new to this.
Essentially, I want everything to work simple & smoothly. I like to make sample based music from records. Can you give me a rundown of the necessary items I'm going to need...cables, interface, etc.
Sorry, if I'm rambling just want to be clear.
I appreciate your time....

I use a Alesis multimix FW and a presonus inspire.
I would guess that you should always get dry sound from any output with firewire plugged in or not. My inspire uses a software control panel to route signal and the Multimix is all hardware. I have no clue how to route signal with the firebox but it has to be one or the other. Presonus is pretty good with updates and bug fixes did you check for new drivers?

Similar Messages

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need help with Printer Setup conventions

    I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
    There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
    Some printer names appear in bold. What does that mean?
    Thanx.

    Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
    As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
    I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
    Problem: I have a network with 2 computers and the Brother
    multifunction fax/printer. I'm using an Apple airport hub. The printer
    and one computer (Mac tower) are connected to the airport base via
    ethernet. The 2nd computer (Apple laptop) is on the wireless network.
    Until recently i could print from both computers. Now I can't print from
    the tower. But I can still print from the laptop.
    When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
    I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

  • Help with router setup

    Hi I need help with my new infinity setup

    seanyg wrote:
    Hi I need help with my new infinity setup
    Surely the openreach engineer did most of it, the rest as said is just plug and play.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • I need help with my setup Please !!! 2800+ athlon xp

    hi all .......... great forum here.....!!!
    I am having probs with my new setup and I am at a wits end of what to do so i'll explain my problem.
    I have just bought a AMD athlon 2800+ cpu for my mobo (KT3 ultra 6830e v.1.0)
    and I am unable to run the chip at correct speed??
    The bios wont boot the computer if I try to set the fsb for cpu at 166 ?? Am I correct in thinking that a 2800+ Athlon needs to be run at 166fsb to get the 333fsb setting?
    I am currently running it at 133fsb and it is registering it as a AMD 2200+ chip ???
    I am quite new to playing about with my bios but at the moment it is set at defaults on everything because i had to reset the cmos jumper about 8 times last night after trying different settings, in the end i gave up and thought i'd ask u guys for help???? Please !!!
    I spoke to the shop i bought the chip from and we got talking about that when i set the fsb for chip to 166 it changed the ram settings to host clock + 66 (host clock was set at 100mhz) thus trying to make my 2100 ram(266) run at 2700(333) specs ?
    Is this the problem why my computer wont boot when it is set to 166 fsb cuz it is asking the ram to be 333ddr when it isn't???
    Is my problem going to be solved if i purchase some 2700 ram ?? if so i'll be quite happy, or is my board just not capable of running this 2800+ cpu on it???
    i read up b4 i bought the cpu and i thought i was able to run this chip maybe i read wrong? any help would be greatly appreciated , oh i also flashed my bios to the most recent msi update which was 5.7 i think (AMI bios) and the flash was succesfull (LOL) very worrying!!!!
    anyway hope i have explained my problem well enough as i myself am very confused!!!!
    Thanks in advance
    Dave

    i have just had a look around the net and it looks like there are two versions of the 2600+ available one with 133/266fsb support and the other with 333fsb ???
    Do u know that if i take my 2800+ back to the shop and change it for a 2600+ cpu if i should just get a normal one(133/266fsb) or get the 333fsb version???
    as that link u posted for the mobo supported cpus only lists the 2600+ as being a 133/266fsb chip ???
    I will get some 333ddr ram as well just incase i need this to allow the 2600+ to run correctly
    Also (sorry to be a pain) but can you explain to me how to change the multipliers correctly to get full power from the chip ?? as i read that a 2600+ comes out at 1.91ghz standard , but i was reading a review where the user was told by AMD that it will run higher by changing fsb or multipliers (or both?) ???
    Do u have to set the fsb to 133 and then change the multiplier to a value to up the speed or just keep changing the fsb alone and leave the multipliers alone ????
    Hope you can help me......
    Thanks once again for your replys..
    Dave

  • Need some help with VAT Setup

    Here is my scenario.
    We're dealing with a partner in Germany. We will be shipping them parts from the US and need to slap on a 19% VAT surcharge when invoiced.
    I can get the VAT to calculate correctly on the SO and Invoice, the issue is that it will not post to accounting because of the below error:
    Tax statement item missing for tax code O1
    Here is my setup:
    I am using condition type MWST, access sequence Country(US)/Destination Country(DE) Amount 19%, Tax Code O1
    In OB40, under key MWS, I have the GL account entered for the Tax Code and Accounts are determined for Tax Code.
    I looked at the GL itself and in the control section, the tax category has a * meaning all tax types are allowed. It's also configured to post w/o a tax code present.
    I'm at a loss, is my setup missing something or completely incorrect?

    After kicking this around for a few days I'm still lost as to the issue
    The new error I get is "Condition type MWST tax code O1 does not exist".
    "When calculating tax, the system tried to determine the   
    condition amount and the condition number from tables A003
    and A053 using the specified condition type and tax code. 
    However, no values were found there."
    I discovered this SoldTo had a jurisdiction code and as soon as I removed it, I got past the earlier error and run into this one now. It appears it defaults to the jur. code for our main office if one isn't assigned to the sold to. I looked at these tables and these are the condition tables behind the MWST access sequence for tax condition types.
    Here is my scenario again, please help me confirm I am approaching it the right way.
    Need to collect 19% VAT when shipping from US plant to Germany.
    I am using condition type MWST on the pricing procedure and this has an entry in VK13 to apply the 19% tax based on source/destination country. This seems to be working, it pulls it in ok onto the order in the tax field. I am using tax code O1 in the VK13 entry. I assume this is used in conjunction with the TAXUSJ procedure and will be used to calculate the right tax amounts. 
    I assume that since the source country is US, the tax calculation procedure TAXUSJ is where I need to do any config. I added a MWAS condition type which points to AccKey MWS. However, in FTXP I cannot enter in any percentage here. The field is greyed out. Within VK12, the only options I have for tax codes are from TAXUSJ.
    I'm assuming that when trying to post to accounting this is where it's getting stuck since it can't find an entry in the condition tables behind this.
    Can someone who's more of an expert on this please confirm my approach is correct.  How can I get this tax in the TAXUSJ procedure?

  • Alittle help with dual-setup with ati radeon 5770

    Hello everyone, I have been trying to setup a dual display with 2 flat panel monitors.
    1. A WestingHouse Digital Electronics "17"
    2. A Goldstar Company Ltd "23" (Main Display)
    Im currently running the gnome desktop, what im trying to setup, is have both the gnome desktop show up on both monitors. For example if I wanted to move something from my main monitor to the smaller one to the left of me, I want to NOT be able to do that, and only have the mouse be able to move accross the 2. 2 Seperate desktops one 2 seperate screens. Im not quite sure what its called, Im thinking maybe its a clone Desktop? Anways, The graphics card Im using is an
    Ati Radeon 5770, has 2 vga ports. I currently have the "video-ati" driver installed and works well with my main screen, but im unable to get my secondary screen (to the left of me) working. I tried going into System>>Preferences>>Monitors, and tried tinkering with the display, and tried enabling the 2 monitors and moving them from left to right, to see if that would possibly let it show up or start to function, but only the main screen works. I generated a new xorg.conf, since I didnt have one prior to installing Arch, I was following these to guides
    http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors
    http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors/ATI
    both are very nice, but Im still not quite understanding yet. Defiantly am trying. I edited my xorg.conf a few times, but got the same results each time, just the screen going blank and X crashing.  I have here a copy of my xorg.conf, Xorg.conf.log, and xrandr output
    Xorg.conf
    http://pastebin.com/hbmdKrfv
    Xorg-logs
    http://pastebin.com/USZvtAMJ  (Im thinking the Vsync and Hsync have something that might help)
    Xrandr
    http://pastebin.com/2cV95Ef4
    Thank you guys!

    An xorg.conf may not be necessary, but I still find it nice to have the control that the file provides.
    In looking over yours, I see several things that could be causing your problems.
    First off,  I notice that you have Screen0  that is using Card0 and Monitor0.  This part looks ok. 
    When I look at Screen1, I notice that you are using  ATI Graphics Adapter1 and Monitor1.   I don't see entries for either of those, although you have an ATI Graphics Atapter2, but there is no entry for your second monitor.
    I also notice that you are trying to use both radeon and fglrx as drivers.  As far as I know (and I don't have an ATI video card at the moment), you can use one driver or the other, but not both.
    After you have these things fixed, then you can put in the Screen section in your server layout to describe the positioning of your second monitor.
    All in all, the issues that you have to fix are minor,  but frusterating if you are too close to the situation. 
    Good luck.

  • Need a little help with dial setup on CME

    I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks.   I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN.   My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
    What's happening is this.  I can dial local numbers in my area as 7 digits or 10 digits.  The phone company doesn't yet force us to dial area code and number for local calls (10 digits).  I can still dial 7 digits.   But...if I put an entry in CME that looks like this....
    (by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
    dial-peer voice 9 voip
    description Outside 7 Dig Local Calls Via Avaya
    destination-pattern 9.......
    session target ipv4:192.168.1.1
    dtmf-relay h245-alphanumeric
    no vad
    ...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513.  I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9.......   Understand what I mean?   Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
    dial-peer voice 9513 voip
    description Outside 10 Dig Local Calls Via Avaya
    destination-pattern 9513.......
    session target ipv4:192.168.1.1
    dtmf-relay h245-alphanumeric
    no vad
    ...BUT...here's the interesting thing.  If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN.  It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late.   It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
    I'm more familiar with how to setup dialing in the Avaya via ARS.  My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does.  I just need some pointers and examples to look at :-)   I think I've almost got it....but I'm just missing something at the moment.
    Just so you understand, the call flow should be like this:  Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya.  I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya. 
    Thanks for your help

    Here is a good document that explains how dial-peers are matched in the Cisco world:
    http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
    In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
    dial-peer voice 9 voip
    description Outside 7 Dig Local Calls Via Avaya
    destination-pattern 9.......T
    session target ipv4:192.168.1.1
    dtmf-relay h245-alphanumeric
    no vad
    dial-peer voice 9513 voip
    description Outside 10 Dig Local Calls Via Avaya
    destination-pattern 9513.......
    session target ipv4:192.168.1.1
    dtmf-relay h245-alphanumeric
    no vad
    You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
    Please rate helpful answers!

  • Help with DNS setup for LAN only

    I have a Mac Mini SNS 10.6.8 as our company's local standalone fileserver.
    Everything has ran great for the past year (still is), but now I want to try and setup DNS for more control and services.
    The server host name is servername (no FQDN), which shows up in Server Admin as servername.local.
    I read and followed Hoffman Labs great step-by-step, but must have missed something, since I still cannot get DNS resolution.
    Here is a brief summary of the Server Admin settings:
              Host Name                    servername
              Host (Server) IP          192.168.4.2
              Router IP (also default public DNS IP) 192.168.4.1
              Bonjour                    Wide Area  =  Not enabled
              Settings                    Accept recursive queries  =  localnets
              Settings                    Forwarder IPs  =  8.8.8.8  &  8.8.4.4  (Google Public DNS)
    now...          Zones                              1 Primary Zone  =  companyname.net (we own the domain)
                                            Primary Zone Name  =  companyname.net
                                            Nameserver Zone  =  companyname.net
                                            Nameserver Host Name  =  servername.companyname.net
                                            2 A Records:
                                            servername          192.168.4.2
                                            user1                    192.168.4.3
                                            Reverse mapping - automatic - OK
    Testing          Ran sudo changeip -checkhostname
                        Results:
                                  Primary address          =          192.168.4.2
                                  Current hostname          =          servername
                                  The DNS hostname is not available. Please repair DNS and re-run this tool.
    I must be doing something wrong, but I don't know what it is.  Please help.

    Did you intend to have both "example.com" and "example.net" listed there?  Are those domains really different?  I'm going to assume that was an obfuscation error.  (This is part of the "fun" of obfuscation, unfortunately.  Of having to differentiate errors in the actual configuration from errors that were introduced during the obfuscation.)
    >Oddly, even though I had manually assigned our Comcast gateway's DNS to Google DNS IPs, the gateway summary still shows up as Comcast's DNS server IPs.  So I removed the manually assigned Google DNS IPs from the gateway.
    The gateway (or whatever you're using as your DHCP server) should be configured with the DNS server address of 192.168.4.2.  All other hosts on your network (if you're planning to use your local DNS everywhere on your LAN) should also reference 192.168.4.2, either through an explicit static configuration, or as the address that was received from the DHCP server.
    And as for IP routing, are all your hosts, network printers, network gateways, DHCP servers, etc., all in the range of 192.168.4.1 to 192.168.4.254?  (They should be, if you're using a /24-class 255.255.255.0 subnet mask.)
    But then I don't know where this configuration has gone off the rails...  (Over the years, I've seen and have made my own configuration errors, I've been "bagged" by DNS caches, and I've hit various bugs in DNS implementations.)  What you have stated here should work.
    I'd start at the top of the DNS configuration article, and not stray from what is written there.   That there has been Google DNS and have had ISP DNS configured at the gateway does mean there were some areas that have strayed from the article.   I'd suggest following the DNS server configuration directions exactly.
    Setting up DNS services with OS X Server isn't difficult, but it can be a little fussy. 
    If you don't understand something that's written in that article -- or if you believe you need to enter something different than what's listed there -- then please stop and ask about it.  Either ask here, or ask over there.  (This feedback also helps improve that article.)
    Straying from what's written in that article is certainly and entirely feasible, but that's something best left until after the adminstrator is more familiar with running a DNS server.  Once you know how and why and where you can stray, there are all sorts of things you can do within a DNS configuration.

  • Need help with configuring setup cost as variable based on quantity

    Hello,
    I am brand new to PP and my client has inquiry as to how they can make the setup costs variable based on the production quantity. They already have the machine and labor working correctly, so I compared the formulas for machine and labor time with that of the formula for setup time and they are not the same (in fact, setup time does not have any formula). Do I simply need to create a formula for this or are there multiple other steps? If anyone can give instruction on how to set this up it would be of great help.
    Thanks,
    MH

    Check in the Work Center, tab Costing where Setup Time should have a formula using operation quantity / base quantity as ratio.
    Setup time should be included as parameter in the standard value key.
    The formula in the Capacity Tab would have only effect on the capacity evaluation, but no costs impact.
    Edited by: Dario on Feb 2, 2011 7:04 PM

  • Help with our setup and output to Excel

    OK, I work for the EPA Office of Research and Development (ORD) here in Cincinnati.  We are working on this big project that is coming to an end.  Basically, we have four different carts going.  We have one ultra filtration cart (UF), one reservoir cart, one ion-exchange cart, and one RO cart.  The UF, reservoir, and RO carts will all be hooked up to the computer via DASYlab.
    Currently, we think that we have our DASYlab setup correctly.  We want to graph everything over time and we want to export everything out to Excel so the data can be analysed later.  I have been in contact with DASYlab help but this really isn't there job.  I was wondering if someone could look at our DASYlab file (or give me idiot proof instuctions) into making sure that data is collected once every 2 seconds, the graphs are updated once every 2 seconds, and that the charts that will be output to Excel are updated once every 2 seconds.  We are working on a P-M 1.8GHz notebook with a 100GB hard drive and 2GB of RAM so it can definately handle the flow of data.
    No one in our project (or TTEB branch) has any experience with DASYlab.  The last person to have this type of experience was working with Strawberry Tree back in the early 90's on a old 286 PC via DOS.  It was actually the job of the contractors who built our equipment to get everything setup.  However, they fell through as they didn't have any previous experience with DASYlab and they just didn't feal like reading through the 100's of pages of text.  This assignment was handed over to me just last week and I think I have everything setup correctly.  I just don't have to the time to fully read the manual.
    I would appreciate any help.  If someone can help then feal free to PM me and I can e-mail them the two necessary files.
    Thanks

    Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
    1.  After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro.  I'm guessing that PP will, in future versions, make better use of them.  For now, no need to spend more than a couple hundred bucks on one.
    2.  Update the software.  PP and AE both performed substantially better after installing the .01 update from adobe.  After you install the update, be sure to re-do the CUDA hack, if necessary.
    3.  As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked.  This is where performance happens.  I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it.  More than that probably won't be utilized.  Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?).  Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
    Keep in mind that all of this has to do with RENDER speeds.  I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

  • Help with phpMyAdmin setup.php script

    Hi all,
    I am a newbie to Arch Linux even though I've been running Linux (-only) for more than a year. I have been mostly running Debian based distributions, so sometimes I feel a bit lost on Arch. So far I have been able to set everything up, from wireless to X server (by just reading the instructions, and some posts in the forum).
    Now I am stuck with something that is not so distro-related, I was following this guide (http://wiki.archlinux.org/index.php/LAMP) but I got stuck at the configuration script for phpMyAdmin.
    In fact, when I go to the address http://localhost/phpMyAdmin/scripts/setup.php I can only see the PHP code, not the web page.
    Now I am sure that Apache is running properly since my php test page runs just fine. So I cannot figure out why the setup.php page does not show correctly.
    Could somebody please give me some hints?
    Any help is greatly appreciated,
    Thanks for your time.

    np .. i forgot one point though , you needed to restart the web server so the php module takes the new settings. this is the case fro all config changes to either teh websierver or a modules/addon

  • Easier way to view phone call logs? Also, help with email setup...

    1.  On my 8220 it's not very efficient to view past call logs and or missed calls.  I have to go into my Messages folder, click the menu button, scroll down to 'view folder' and then scroll down to my 'Phone Call Logs'.  Is there a way to create a folder dedicated to viewing call logs and my missed calls on my home screen without going through all that timely navigating?  Is there a special download for this application?  I've seen this folder on the BB 101 tutorial webpage.
    I'm with Rogers Wireless if that helps.
    2.  When I select the Email Setup it only gives me the the option to "I want to use a work email account with a BlackBey Enterprise Server" and no option for the "I want to create or add an email address" which I see on the BB 101 tutorial webpage.  Well, I'd like to create or add an email address.  How can I get that option on my phone?
    Oh and one more thing, is the 8220 able to run the BB maps application?
    Any help is much appreciated!

    1) While in your messages folder, try pressing ALT + P to bring up the phone logs without all the navigating. (I know that works on other BB models, I don't know on the 8220).
    2) Do you have a BB Data Plan on your carrier account? Once it is , you will get the personal email setup icon.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help With RAID Setup

    I have two 250gb internal Hardrives(western digital) and one 500gb internal Hard drive(Maxtor).
    Is it possible for me to RAID(Stripped) the two 250gb hdd's than Mirror that setup to the one 500gb hdd for back-up?
    If yes, how do I set it up? which options in disk utility do use to creat this

    Open Disk Utility and select any of the drives in the left side list then click on the RAID tab in the DU main window. You can configure RAIDs there. You can create a striped RAID with the two smaller drives. You can then create a mirrored RAID of the large drive and the striped RAID.
    Note that you cannot add a drive to a RAID if that drive is a startup volume. You must boot from an installer disc, create the RAID(s), then install OS X on one of them. You should also know that you cannot do firmware updates when booted from a system installed on a RAID. Boot Camp will not create a Windows partition on a RAIDed drive.
    Use Disk Utility Help from the DU Help menu for more assistance.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Help with speaker setup please

    I have a audigy se and use Ventrilo and play WOW. The situation is I Would like to have ventrilo with my headphones and WOW with my 2 desktop speakers... Is there any way to set this up? Thanks for any advice/help!!?Kixyour

    flatpickit wrote:
    Is there a way to use Mail with a free email account?
    Mail doesn't care, itself. All Mail cares about is whether you have the numbers to plug into the setup. The free or paid thing all depends on the mail provider. Yahoo doesn't care what PC or Mac program you are using to access it. They simply block the POP access by default, and release it when they have your money.
    If you use Mail with a mail provider that has free mail client access, all you have to do is plug in the server info and you'll have direct access. GMail is one of these.

Maybe you are looking for