HTML email is saved, the PR_RTF_COMPRESSED property does not contain embedded HTML

Hi
When HTML email is saved, the PR_RTF_COMPRESSED property does not contain embedded HTML.
This causes that Outlook does not open saved message as HTML message.
When MAPI profile is configured with CACHE mode ON, the PR_RTF_PROPERTY contains embedded HTML
and Outlook opens saved email correctly as HTML.
Do you have any idea what can cause such behavior or how to configure MAPI profile to save embedded HTML into PR_RTF_COMPRESSED when CACHE mode is OFF? If you need more information let me know.
Environment description:
Server: Exchange 2013
Client: Outlook 2013
MAPI profile configured with CACHE mode OFF
Thanks you very much for any advice.

This is bug in Exchange 2013 see
http://support.microsoft.com/kb/2862739/EN-US and also
http://social.technet.microsoft.com/Forums/en-US/58f00a26-e20b-4e1c-9790-9969ab423b2f/move-message-with-attachment-from-one-mailbox-to-another-problem
Currently there is no fix for this and the only workaround is to use Cache Mode. This only affects Exchange 2013 and Office365 (which is on 2013)
Cheers
Glen

Similar Messages

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

The selected folder does not contain the current site's homepage

dreamweaver displays the following message when editting some
sites:
"WARNING: The selected folder does not contain the current
site's homepage. The site map cannot be built."
Then my remote info is cleared!
I know I'm obviously not doing something, but there is no
need to clear my remote info!!
edit: I've selected my home page, but this still doesn't
explain why Dreamweaver feels the need to erase my remote
info!!!

> Then my remote info is cleared!
Huh?
This only means that you have not told DW which page is your
home page.
Find it in the local file list, and use the right-click
context menu to so
designate the file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:f2293h$7lg$[email protected]..
> dreamweaver displays the following message when editting
some sites:
>
> "WARNING: The selected folder does not contain the
current site's
> homepage.
> The site map cannot be built."
>
> Then my remote info is cleared!
>
> I know I'm obviously not doing something, but there is
no need to clear my
> remote info!!
>

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

MDT 2013 The source directory does not contain an identifiable operating system

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.
This is expected behavior because Server 2008 is unsupported in MDT 2013:
http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Source not found: The source attachment does not contain the source........

Source not found: The source attachment does not contain the source for the file ClassLoader.Class
Hey,
I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
Thanks in advance for your thoughts,
Struggling to Run

Ok...after I thought everything was going well enough.... problems are arising.
Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
with the two environments installed i thought i was ready fro the next step.
I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
1___________
java.lang.NoClassDefFoundError: couponCounter/CouponCounter
Exception in thread "main"
2__________
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
     Syntax error, insert "}" to complete ClassBody
     at BensCalculator.main(BensCalculator.java:112)
Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
Thank you

"The selected file does not contain audio media ..."

I'm using Premiere Pro CC in Windows 7. A week ago I created a project using media from an external hard drive. I opened the project today to make changes to it, and a number of the .MTS files show up as missing. When I click on "Link Media" and locate the file -- which shows up as being on the external drive -- I get the following error message: "The selected file does not contain audio media used by clip references in one or more sequences. These audio clip references will be deleted, and cannot be undone. Do you want to continue?" I have canceled out of it because I do not want to damage my project irreparably, but I'm trying to determine the best course of action in re-linking these clips that are essential to the project. (I did apply a Left Fill to all the audio in the project, but I don't know if that would cause a problem, or if it did, how I could remove that effect. I've tried to re-link with several previous autosave versions of the project, only to get the same result.)

Try this:
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

The current project does not contain an EJB Module to deploy

Im trying to deploy the VSM sample app to a external oc4j.
After creating the deploy profiles and trying to deploy to the connection i created to the oc4j the deploy window says the project "**The current project does not contain an EJB Module to deploy" and start to deploy the war file.
have i made something wrong?
thnks.

We have no idea what the "VSM sample app" is. The problem is probably
in the sample app. The warning message just says that the EJB profile
has nothing to deploy, because the project doesn't have any EJBs.

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

The "Cluster Group" does not contain a File Share Witness or a Witness disk.

Hi,
I've been given a 4 node Server 2008 R2 cluster to work on. I have a couple of file servers under services and applications (file1 and file2). If I look under storage I see my quorum disk listed in Disk witness under quorum and then I see the file1
and file2 disk resources. Should I be concerned with this warning?

Hi,
Do you mean that you are expecting that you saw the File Share Witness under "Disk Witness in Quorum"?
I just created a cluster and set FSW like this:
However it will not displayed under Disks. It should be caused by design.
My test machines are Windows Server 2012 R2.
If you have any feedback on our support, please send to [email protected]

Error VF198 " The billing item does not contain a quantity"

Dear colleagues,
When I try to bill a sales order with a billing plan, I get this error message in the log at the time of invoice creation.
The billing plan itself consists of a line with date, value and other rules for downpayment and another one for the closing invoice.
The materials have prices and confirmed schedule line quantities in the sales order. Dates and values get copied from the billing plan and everything seems to be in order.
I get this message once in a while, not every time, but the investigations so far have been to no avail.
Thank you very much in advance for your suggestions!
Regards,
Miro

Hi
I request you to kindly check with your technical team,why it is happening sometimes.So check wheather the copy controls,billing plan has been set correctly or not.
Regards
Srinath

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

The extension does not contain a valid signature

hey guys, newbie on deck!
So, after installing CS6 I ran the Adobe Update Manger. During the update the Adobe Extension Manager (AEM) fired off and began updating as well. One error I saw was:
The extension 'Adobe_Flash_Professional_Toolkit_for_CreateJS' does not contain a valid signature. The extension will not be installed.
I'm not sure what this is or what it does but I would like to:
Understand the Adobe ecosystem and
Clear any problems.
Here's what I do know:
The Mac I have is 2 days old and probably in the best shape of its life.
I installed CS6 fresh from a DVD.
Ran the Adobe Update Manager the next day (today).
I don't intend to use Flash.
If anyone can expain common causes for this behavior and a fix I would greatly appreciate it.
Thanks in advance,
TT

Hi JesusPresley,
The root cause is the updater updated Adobe Flash, which tried to install the extension above by Extension Manager in the installation. However, this extension was NOT signed with the updated Adobe certificate, so the extension installation will be rejected by Extension Manager. That is what you got. We have sent this issue to Flash team.
If you don't use Flash, you can manually edit C:\Program Files\Adobe\Adobe Flash CS6\XManConfig.xml, and remove the line <Data key="SupportedInSuite">CS6</Data>. Thanks.
Xiaoyi

HTML email is saved, the PR_RTF_COMPRESSED property does not contain embedded HTML

Similar Messages

Maybe you are looking for