Help with Nano not working

Help!!! My Nano was fully charged and I let it sit for longer than a week. When I went back to the Nano, the battery was gone. I attached it to my Mac and the apple logo appeared and disappeared. It would not power on. The Nano turned on after 20 minutes, but it was cycling through the choices. Then the Nano shut off. When the Nano is on, it is not being recognized by my Mac. My 5G iPod works fine on the usb cable.

See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.

Similar Messages

Can anyone help with Terminal not working properly on 2013 (late) mac pro?

New 2013 (late) mac pro. 10.9.2 osx
Using Terminal utility and giving "cat" command, I get a return message of "file or directory not found" even though the files are right there. This is a little procedure I have performed with older mac pro and laptops (also Mavericks) and never had a problem.

Thank you for posting Linc. I worked it out, it is a case of user error.

Hi guys, need your help with iCloud notes on Mac 10.7.5; I've found this feature's more useful comparing with stickers, however can't pin notes to desktop or dock, "double click"on the note doesn't work with this version of software.

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Help button is not working in Infoview

Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.

CLOSED

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

Applications associated with workstations not working

Hello,
I have onld zen 7.x, on netware.
Applications associated with workstations not working or appearing in one container. Not sure if it every worked. Apps work fine with users.
I am in a bind, since I need to get the app out in the workstation space.
It maybe rights or simple install error with the ZEN from the begining.
thanks for any help or ideas.. Yes I know I need to get to Zen 11.
Phil

PhilJannusch,
> Applications associated with workstations not working or appearing in
> one container. Not sure if it every worked. Apps work fine with users.
>
> I am in a bind, since I need to get the app out in the workstation
> space.
Please tell us more as "not working" can mean a lot of things. So:
Are they user or workstation associated?
Are those for whick they do not work (users or workstations) all in the
same container?
In what way do they not work?
Any errors?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Help - Airport network not working - confused!!

Hello, I wonder if anyone out there can help. I have got a problem with my airport network that doesn't make any sense and I havent seen another post with the same problems.
I have an imac G5 with 10.3.9. I have a wireless network set up, with an airport wireless card and two ax boxes (the second was bought later to boost the signal when we moved the Mac to another room). Initially it set up fine and worked for about 8-9 months. Then I noticed the second ax started behaving strangely. It would occasionally turn from 'green' to flashing amber for no reason - often after it had been on for a while. Turning it off and on did not change anything. Usually though it would work again the next day after being off all night. This continued to happen randomly until a couple of months later it switched to flashing amber continually.
I thought it had 'lost' the network so I tried using the airport set up assistant to reconnect it. However the set up assistant does not recognise ax number 2 any more, so I am not able to reconnect it. At the moment I am running off a faint signal from ax number 1.
I also tried setting up a completely new network from scratch. Again the new network is fine from the base ax bx but ax number 2 is still not recognised by my mac.
I also have a wireless printer connected to the network which does not work any more. This is where things became more confusing. The printer needs a boost signal to operate so when my booster ax went wrong the printer would not work. So I moved the printer and mac nearer ax number 1 to ensure it would pick up the network. However it still didn't work. So I attempted to set up the printer as wireless again, thinking it had become 'disconnected' somehow. However during installation you have to select the network to connect to. The computer would not pick up the apple network at all from ax number 1, yet it easily recognises our neighbours network from the flat above us. Strangely when I tried turning on the faulty ax box, the printer set up program picked up the faulty ax and not the original ax. But obviously I can't use the printer from the faulty ax box because it doesnt connect to the rest of the network.
So now I am confused. I am not sure what has gone wrong and what I need to replace. Originally I thought it was the second ax box that had gone wrong. But as the printer software can identify the second ax box I am not sure that this is the problem. Could there be something wrong with the airport card? I have checked that the card is properly connected and there is nothing visibly wrong there.
If anyone can help - please reply as I am going crazy here with things not working and don't know what to do next.
Thanks, Wrenster

Hello Wrenster,
I understand why you are confused, I was too while reading your post. However I have the solution for you. I believe you are a victim of environmental interference. Someone in your neighborhood just moved in with a another network, someone had a baby and is using a baby monitor, or maybe a local ham radio operator just got his license. Who knows!
This is what you need to do. Get all the devices in the same room and preform a hard restart on each one them per http://docs.info.apple.com/article.html?artnum=108044. Remember to preform a hard restart! After performing a hard restart on all three devices check the wireless networks available. You should have 3 ( one main and 2 airport expresses) ( or two depending on how many airports you own, I am not sure from your post). If you don't have the correct amount you may a bum base station and it may need to be replaced. But if you have the correct number of wireless networks ( Apple network XXXXXXX), use the airport admin utility ( inside of the utility folder ) to locate the main base station and configure it.
You will know when you are on the configuration page when you can read Name, Contact and Location.
First change the name to the location of the main base station, ie; it is the den so name should read DEN. leave the contact and location alone. On the bottom half of the page is where you create your network, so under network name change it to your desired network name ie; when others come over to my house I have them select COWSWEAT from the network list.
Second click on the change wireless security and set the security to WEP 128 BIT and make your password. Once you have configured a successful password be sure to click on the lock on the main configuration page ( the one with password under it) to get the HEX password for your PC friends.
Third ( we are almost done ) Select the WDS tab at the top and enable this base station as a main station. Select allow other wireless client on this base station as well. Now on that empty list box below click the plus sign to the right to add other base stations to this WDS network. From here you should be able to select the other 2 base station that we have not configure yet ( but preformed a hard restart on). After you have added them ( be sure the check box for auto configure is selected) they should read in the list that was empty on the WDS page.
Now update this should start the update process and may take 5-10 mins, it should provide a summery pop-up when with each station is done.
( Also you may get a message that there is update for the base station, please preform the updates for the selected base stations)
Now when it is completed check to see how many networks you have available ( it should only be one ). Select the network and confirm that all of your base stations appear under the select a base station in Airport admin utility, then move them back to their homes around the house. Giving them 45 secs to restart they should turn green if not , they could out of range of each other or the environmental interference could be affecting them. So you my need to rearrange them until they all green.
Good Luck,
Cowsweat

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

In P6 P6 Help link is not working

Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?

Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar

Axis bank net secure with webpin not working on ipad2

Hi,
Axis bank net secure with webpin not working on ipad2
Lt me know how to proceed

Try using their App:
https://itunes.apple.com/in/app/axis-bank-mobile-application/id517266358?mt=8

Since installing Yosemite, Airplay with Freebox not working

Since installing Yosemite, Airplay with Freebox not working
With Maverick Airplay working well

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try deleting the printer and scanner and add them back.
Also try Applications/Image Capture to see if it can find the printer and scanner.

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

PLz help 7key is not working suddenli in my N-73

PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
Birla

Ok.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Help with Nano not working

Similar Messages

Maybe you are looking for