Help with OEM Clean-up after databases are dropped.

Our developers create and delete about 10 database each week.
Our OEM Agents do a great job and automatically register these with Grid Control.
THE PROBLEM:
Over time, these database are deleted. Which means we get alot of obsolete or unreachable entries in Grid control.
To clean these entries up takes alot of time and effort. It took us about a week to delete 500 entries which were created last year.
Is there a way to have deleted database automatically deleted from OEM?
Are there any known problems with adding and deleting a large number of targets each week?
Thanks in advance,
Dan

Please refer to MOS notes :
Grid Control Target Maintenance: How to Manually Delete an Orphaned Target From Grid Control Repository Database? [ID 267179.1]
Grid Control Target Maintenance: How to Request Force Deletion of a Target From the Grid Console? [ID 463241.1]
Regards
Rajesh

Similar Messages

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

Help with a server - crashed after update -SOLVED

Hi everybody.
at the school where I study,. its the student who´ll take cake of the network, and now we have a really big problem...
After an pacman -Syu, (by an older student) one of the servers crashe. Its the only one that´s been updatet. Its run f.i. Apache , stunnel and up against an LDap server.
The problem is that the only way you can get into it, is in single user mode. At normal boot at the login-menu - we could type in the username and passwd, but the machine is too long to validate the passwd so it times out. thats also when you trying to lock in as root. And we cant start Apache(Even though we selv compiled it, and not did a pacman on that one.) But I´m not into arch that much yet, so hoefully someone can give me a hint about what went wrong during the updates..
But the worst part about that one is, that everything goes by that one, so we cant get in på using ssh.. But after 7 hours trying and studying the net - we didn´t get anywhere. and we don´t have a clue what to do ...
looking in the logfiles do not show anything unusual....
in normalboot at the login screen, after ca. 40sek. the message comes :
The server died unexpectet... thats it
So please help with this one - if anyone have a clue what went wrong..

Heya,
have you tried using a knoppix-cd or another live-cd to have a look at the system or isn't that a possibility?
You can also login by adding the following kernelparameter: init=/bin/sh
However, I'm not sure how to mount the partitions then.
I'm guessing that the message "server died unexpectedly" is coming from a certain server-process (not the machine). Do you know which process and have you had a look at the logfiles (if there are any) of that process?
You can have a look at the output of the "dmesg"-command maybe if it is kernel-related (I think).
You say it isn't overridden. Are you sure? You can tell pacman to not override packages or certain files, but you have to mention it in the "/etc/pacman.conf"-file.
Hopes this helps you,
greetings,
Michel

Help with Premiere Pro freezing after importing MPEG files

I have
had some files sent for me to edit which are MPEG I believe. They will import, but
as soon as I try and do anything with it, the whole thing freezes for several minutes! It is unworkable. I have tried waitin
g for the audio file to conform. I have tried rendering the work area. None of this helps. If it does play, it lasts for a few seco
nds with sound playing at what appears to be twice the speed! I normally wortk with DV files and these are fine. By the way, the files I am struggling with do play in media player/real player etc. I cant believe that premiere would not support this format. Even Movie Maker just about manages it! When it does freeze, it really freezes! As in it wont even let me shut down without literally ripping out the power cable!! Please help with simple English if possible, and sorry if I havent given you specifics that you would need. But I honmestly dont know as these were just files sent to me on a memory stick. It was filming from a camcorder, but not sure what type. The thumbnail says MPEG and the properties just says movie file. It is about 2GB for an hour I think. Thanks for any help. My version is Premier Pro 1.5

Genuinely sorry that I dont know all the technical things that people need
to know. I always try to find out when I am asked specifically and told how
to find them. I did look at the link, but that just seemed to be a lot of
stuff about posting ettiquette, nothing about MPEGS. Perhaps I got the link
wrong. All a bit hard for me as I have a visual imp[airment. Thanks again

Help with start up probs after force quit

Hi there . I think I'm royally fckd. I was on blogger and my screen froze no cursor move nothing had to force quit. Now every time I try to turn on the MacBook Air all I get is a black screen and that start up noise over over over again . still black screen and no log in page . Is there a way to fix this or is it royally gone to mac heaven.help with thanks .

your force quit wouldn't cause an inability to powerup. Black screen on every powerup?
SSD or logic board fault likely.
Contact Apple for diagnostic/ repair.
Anything in your Air can be fixed yes.

Help with Loops!! All loops are RED and unclickable after Leopard upgrade.

I may need to just remove soundtrack pro from my computer and start from scratch again. When I upgraded to Leopard I failed to select preserve user settings when I did an archive and install. So therefore I had to find and drag files to the new library. This is on my Power Mac G5.
I have a Macbook Pro laptop and I used that as a guide of how I have that set up. On my G5, I have all my loops in the same folders they are in on my laptop. When I open STP, and pull up my loop files, they are all listed in red. When I try to click on them, nothing happens.
I have them set up as MAC>Library>Audio>Apple Loops>Apple Loops for Soundtrack Pro, Apple Loops for GarageBand, PowerFX Loops
I am not sure if I am dealing with a bunch of corrupt files and need to start with a new slate or what.
I also noticed that most if not all the audio loops end in .CAF instead of .AIFF in the folders. However when STP is open, the files ARE listed as .aiff files but they are red and non clickable.
Any suggestions appreciated!
Thanks!
Message was edited by: DVX100Shooter
Message was edited by: DVX100Shooter
Message was edited by: DVX100Shooter

Yea once I rearranged the loops and then opened STP and then Indexed those loops, I got everything back to normal except my Trumpet files. I cannot locate them anywhere. There are only 4 loops but I searched my HD and still can't locate where they are but I got everything else back to working.

Need Help with complex query for productio database

Hello again,
i need your help again, for an query how Shows me how long every production step takes per Order.
See sample data and what i expect.
Thank you all for your help.
We use Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Here the sample data tables:
CREATE      TABLE      TABLE_2
(     "ORDER_NR"      VARCHAR2 (12)
,      "PRIORITY"      VARCHAR2 (2)
,      "WO_STEP"      VARCHAR2 (1)
,      "STEP_DATE"      DATE
CREATE      TABLE      TABLE_1
(     "ORDER_NR"           VARCHAR2     (12) PRIMARY KEY
,      "PRIORITY"           VARCHAR2      (2)
,      "CREATE_DATE"      DATE
,     "ACT_STEP"          VARCHAR2     (2)
,     "STEP_DATE"          DATE
,     "EMPLOYEE"          VARCHAR2     (5)
,     "DESCRIPTION"     VARCHAR2     (20)
INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,      CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION)
                    VALUES           ('1KKA1T205634',     '12',          TO_DATE('10-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'),     'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'),     'W0010',     'CLEAN HOUSE');
INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,     CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION)
                    VALUES           ('1KKA1Z300612',     '12',          TO_DATE('08-FEB-13 14:00:00','DD-MON-RR HH24:MI:SS'),     'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'),     'K0052',     'REPAIR CAR');
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'A',          TO_DATE('12-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'S',          TO_DATE('21-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'R',          TO_DATE('21-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'A',          TO_DATE('12-FEB-13 13:52:42','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
COMMIT;And here is what i expect from my query:
SYSDATE     28.Feb.13 14:00
ORDER_NR     PRIORITYCREATE_DATE     STATUS     STATUS_DATE     DESCRIPTION     AGE_1     AGE_2     WAITNG     STEP_A     STEP_B     STEP_C     STEP_5     STEP_K     STEP_E     STEP_F     STEP_S     STEP_R
1KKA1T205634     12     10.Feb.13 10:00     U     28.Feb.13 12:00     CLEAN HOUSE     18,083     8,833     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666     0,042     7,125
1KKA1Z300612     12     08.Feb.13 14:00     F     20.Feb.13 16:00     REPAIR CAR     20,000     16,042     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666          And now the explanation to the query result:
The AGE_1 is the difference in days between the 'CREATE_DATE' and IF EXSIST the STEP 'U' then STEP_DATE or if the STEP 'U' is not found in TABLE_2 then it should show the difference in days between the 'CREATE_DATE' and the 'SYSDATE'
The AGE_2 is the difference in days between the STEP 'A' STEP_DATE and IF EXSIST the STEP 'R' then STEP_DATE or if the STEP 'R' is not found in TABLE_2 then it should show the difference in days between the 'CREATE_DATE' and the 'SYSDATE'
The WAITING is the difference in days between CREATE_DATE and STEP 'A' STEP_DATE
The following columns show the days how long the ORDER_NR stays in these STEP, if an ORDER_NR comes into the same STEP more then one time it should be calculated together.
If the ORDER_NR skips a step it should show a zero in the specific field.
I hope my explanation is good enough, my english skills are far away from good.
Thanks all for your help.
Greets Reinhard W.

Hi,
i changed this query:
with t2 as (
            select t.*,
                    lead(step_date) over(partition by order_nr order by step_date) next_step_date
              from table_2 t
select t1.*,
        nvl(
            max(
                case t2.wo_step
                  when 'U' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_1,
        nvl(
            max(
                case t2.wo_step
                  when 'R' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_2,
        sum(
            case t2.wo_step
              when 'B' then t2.next_step_date - t2.step_date
            end
           ) step_b
from table_1 t1,
        t2
where t2.order_nr = t1.order_nr
group by t1.order_nr,
           t1.priority,
           t1.create_date,
           t1.act_step,
           t1.step_date,
           t1.employee,
           t1.descriptionTo this:
with t2 as (
            select t.*,
                    lead(step_date) over(partition by order_nr order by step_date) next_step_date
              from table_2 t
select t1.order_nr,
        nvl(
            max(
                case t2.wo_step
                  when 'U' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_1,
        nvl(
            max(
                case t2.wo_step
                  when 'R' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_2,
        sum(
            case t2.wo_step
              when 'B' then t2.next_step_date - t2.step_date
            end
           ) step_b
from table_1 t1,
        t2
where t2.order_nr = t1.order_nr
group by t1.order_nrthen i get the ORA-00979 Error.
Whats wrong?
I have another question.
How can i handle i i want to group to or more 'STEP's in one Column.
in Case of this i want that the column 'STEP_B' contains all days for STEP 'B' and STEP '5'.
I tried already with a + Operation like this:
with t2 as (
            select t.*,
                    lead(step_date) over(partition by order_nr order by step_date) next_step_date
              from table_2 t
select t1.*,
        nvl(
            max(
                case t2.wo_step
                  when 'U' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_1,
        nvl(
            max(
                case t2.wo_step
                  when 'R' then t2.step_date
                end
           sysdate
          ) - t1.create_date age_2,
        Round( sum(
            case t2.wo_step
              when 'B' then t2.next_step_date - t2.step_date
            end
           ) +
        sum(
            case t2.wo_step
              when '5' then t2.next_step_date - t2.step_date
            end
           ), 3 ) step_b
from table_1 t1,
        t2
where t2.order_nr = t1.order_nr
group by t1.order_nr,
           t1.priority,
           t1.create_date,
           t1.act_step,
           t1.step_date,
           t1.employee,
           t1.descriptionBut this does reply evertime a NULL.
Thank You.

Help with Organizer (Ver 11) after hard drive failure

I have Elements 11 and am an experienced user. Problem is with the Organizer program. Hard drive (Network attached drive) with 16,000+ images failed. Actual Organizer catalog is stored on my regular computer C:\ drive. ONLY the photos were stored on the external drive. I replaced drive with a new drive (also external network attached). When I run Organizer, all the thumbnails indicate the files are "offline." When I run "reconnect files" from the menu bar, it tells me there are no missing files. If I use the file info window (in Organizer) and click on "Location" it tells me the file location ON THE ORIGINAL DRIVE is offline. If I go ahead and reconnect the file from that window, it does ok... BUT... when I go back to the Organizer and open that image full screen, it does NOT show the name tags of the subject when you mouse-over the displayed image. The "name" tags are still listed in the tag window, but no name on the screen. It looks as if the catalog is somehow looking for that very specific old drive, and that the tag database can't connect to the image on the replacement drive.
What happened to the database of all the people's names that are actually shown on-screen for each image?? The catalog on C:\ is intact and untouched by the external drive failure. How can I get Organizer to recognize all the image files on the new hard drive? I have screen shots of all the messages, etc., if that would help.
Thanks..... Earl

First of all, did you backup your catalog/media files via the catalog manager ? In that case the answer is to do a restore to the new custom location.
Since you are asking for help, I presume you have no backup available.
Now, the explanation for the problem. Network drives are considered 'offline' just like CD or DVDs when there are not active. On the other hand, each of those removable storage media are identified in the catalog database with a unique internal identifier which has the letter drive, device serial number, name and type of device. I am not competent about network drives, but I am sure that pluging another network drive will show different properties. Your drive will be considered offline.
Then, when you want to reconnect, the organizer does not consider the files are missing, it waits for you to plug in the original drive.
What solution ?
What could you do to enforce the Organizer to recognize the new drive as the old one ?
Let's suppose your files had not been on a network drive, but on an external USB drive. Then all your files would have been seen as 'missing' because the recorded paths of your media files would have been different for thedrive identifier, and reconnecting could have been a solution.
The main problem I see is that I am pretty sure that you can't tell the catalog manager how to change the identifier of the offline drive, and I can't see any easy workaround. If someone knows a way, I would be extremely interested! Would it be possible to fool the Organizer to identify the new network drive with the same parameters as the old one?
So, what I would do in your case would be to use an external sqlite database manager to look at the catalog.pse11db file and see how I could change directly the identification of the new drive.
I am pretty sure I could do that if the files had been on an external USB drive (not considered 'offline'). It's worth trying that for a network drive.
Tell me if you want to try such a solution. Otherwise, if you have 'written metadata to files', your only immediate chance is to start a new catalog and import from the new drive.

Help with transfer of music after upgrade to Win 7

I upgraded to Win 7 from Vista, which caused the loss of all my current files etc. I had a current backup (on a sep external HD as well as online) of my itunes before I did this, BUT I failed to consolidate the itunes.
Now I have nothing in my itunes but I have lots of folders under "my music" with subfolders including itunes again, itunes music, itunes media, previous itune libraries, etc, etc.
I'm really unclear, after reading several articles about recreating my library and moving my music and so on. Do I need to consolidate now? Would this help put everything where it is suppose to be?
Any help would be greatly appreciated!

In Windows 7 all the files in iTunes are now in separate folders in iTunes Media so you get mobile apps, music, movies, podcasts etc. I don't know how Vista files were structured but on XP you found movies and podcasts as folders within the music folder.
You can also have folders 'duplicated' in that they can also be visible within another folder. I unknowingly had my iTunes folder stored in both My Music and My Pictures.
Rather than consolidate from the Edit menu choose preferences, go to the Advanced tab. In the top box you will see the location of your files (in my case it is Music\iTunes\iTunes Media), tick 'Keep iTunes Media Folder Organised' and 'Copy files to iTunes Media when adding to library' which should ensure future files go to the right place (and I believe sorts the existing files out.)

Help with POST data if multiple selections are chosen

I've created a form with a menu (list) that includes all 50
states. I'm using the POST option, along with PHP, to process the
form data, which will be emailed to me. The list-menu looks like
this:
http://askdave.info/help/states_menu.gif
and I have "Allow Multiple Selections" checked in the Property
Inspector.
If the user chooses multiple states, I want
EACH of those states to be listed in the email that I
receive. Right now, if I check multiple states, I only get
the very last state that's selected. For example, here's the
email I get after I check 5 different states.
http://askdave.info/help/formdata.gif
Problem--> In this email, only one state is listed
(Hawaii) even though I selected 5 different states. How do I get
the form data to list ALL states that are checked?
Here is what I have:
<form name="form1" method="post" action="process.php">
<input type="hidden" name="required"
value="name,phone,email,states,capital" />
And then for the menu that lists the states, I have:
<label>
<select name="states" size="7" multiple id="states">
<option>All States</option>
<option>Alabama</option>
<option>Alaska</option>
<option>Arizona</option>
<option>Arkansas</option>
and so on...
What am I missing? How do I get the PHP script to send
multiple values, if multiple values are chosen? (I'm new to PHP, so
go easy on me. I can post my code, if necessary.) Is this a PHP
issue, or do I need to add something to the HTML form?

Hi,
>>
I think DynaForm stands for Dynamic Form
>>
this makes some sense ;-) I was just wondering because there
is a pre-made script called DynaForm
here, but
it has a different "logistics" than yours.
However, both "DynaForm" versions are pretty basic, as they
just deal with non-multiple values - form fields like single line
input fields, texareas and non-multiple select´s. Your script
e.g. just loops through all existing form fields using the
"foreach" method:
//Pulls form fields & values.
foreach ($this->post as $field => $value) { // looping
through all form fields
if ( $field == 'required' ) continue;
$this->_addLine($field, $value); // here´s where the
field´s name/value consolidation happens
...and simply consolidates a field´s "value" with its
associated "name". The problem is : this method just works for
fields having just 1 value -- but any "multiple value" form fields
(e.g. your "states" select or checkbox groups which can pass
multiple values as well) actually require a separate "foreach"
treatment within the script, and this hasn´t been incorporated
here.
That said, I suggest using an other pre-made solution like
PHP
Form Mail script that´s capable to handle your multiple
values - scenario innately.

Help with Photoshop Elements 10 after system restore

Hi I need some help and guidance. I have successfully installed my Photoshop Elements 10 twice now; once on my own; and following a MS Vista System Restore; with the help of Adobe support . I then worked on it for a day and all was well.
But unbeknown to me at the time, I had a MS System corruption that was causing Boot issues resulting in a forced Restore of my system and both Restores caused the Photoshop elements desk-top shortcut to disappear and a subsequent PSE10 re-install to fail with the dreaded Data7 , and "Application Shared Technologies" and rollback of Orgainizer and Editor etc etc.
I now realise that the two events were connected and the Adobe Support Person helped me get PSE10 up and running but it involved a lot of file permission changes etc, which lost me in the process, which was done remotely. PS Great customer support!!
After sorting out my MS Vista problem due to "Corrupt System" files, I now need to get my PSE10 up and running again; but how?
Regards John

Have you tried uninstalling and installing again?
thanks.

Help with inserting values to sql database

Hello everyone I am having this problem with how to fill my values in my sql statement, if you look below you will notice i have set up the values to be the length of the arr (arrayList).
could someone please let me now how i should put there values in.
thanks for yr time
piper3
try {
                                                String data = "jdbc:odbc:myProject";
                                                    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                                                    Connection con = DriverManager.getConnection(data,"","");
                                             StringBuffer sb = new StringBuffer();
                                             Iterator it1 = arr.iterator();
                                             while (it1.hasNext())
                                                  if (sb.length() > 0)
                                                       sb.append(",");
                                                       sb.append(it1.next());
                                                  //takes the items of the arInterim
                                                  //int iCountInterim = arInterim.size();
                                                  int er = arr.size();
                                                  String sInterim = new String();
                                                  String sql = new String();
                                                  for(int i2 = 0; i2 < er; i2++){
                                                       sInterim = sInterim + sQuestion;
                                                       if(i2 < (er-1)){
                                                            sInterim = sInterim + sComma;
                                                       sql = "INSERT into Ben (" + sb.toString() + ") values (" + sInterim + ")";
                                                       System.out.println(sql);
                                                       PreparedStatement prepStmt = con.prepareStatement(sql);
                                                       /*prepStmt.setString(1, "hello");
                                                       prepStmt.setString(2, "hi");
                                                       prepStmt.setString(3, "bye");
                                                       prepStmt.executeUpdate();
                                                       prepStmt.close();*/
                                                  con.close();
                                             } catch (Exception e1) {
                                                         System.err.println("Got an exception! ");
                                                         System.err.println(e1.getMessage());
                                                  //System.out.println();//.size());//tempkey+"\n"+tempvalue);

you should write a prepared statement like this:
PreparedStatement updateSales = con.prepareStatement(
"UPDATE COFFEES SET SALES = ? WHERE COF_NAME LIKE ?");
where "?" is a placeholder for the values you want to use.
Then later when you want to actually update your database, first set the placeholders to your values (stored in your array for example) using a statement like this:
updateSales.setString(2, "Colombian");
//sets the 2. placeholder in the statement to the value "Colombian"
after having set all placeholders to a specific value, execute your statement:
updateSales.executeUpdate();
your code should like:
sql = "INSERT into Ben values (?,?,?)";
PreparedStatement prepStmt = con.prepareStatement(sql);
prepStmt.setString(1, "hello");
prepStmt.setString(2, "hi");
prepStmt.setString(3, "bye");
prepStmt.executeUpdate();
prepStmt.close();
HTH
Christine

Help with a clean install

I am not sure what a clean install do - My question is:
If I do a clean install - and I have made a Time Machine backup on an external drive - do I after this install have the possibility to reinstall all my application from this Time machine Backup. And can I drag and drop each application I want back - from the backup to my new installed Lion disc ?
Hope my question is to understand. English is not my mother tongue
Best regards - Frank

well, what happens during the install of Lion is that you will be asked if you have a time machine backup you want to apply. Then all the data and applications you had backed up are put into the lion system. u don't really have the choice of just putting individual apps back.

Help with setting a 2nd Standby Database

Hi,
I have an active DataGuard 11gR2 with a physical standby actively running on Linux.
Now, I need to add a 2nd physical Standby database (for reads only) to this environment, can someone please point to a resource/document which discusses the steps which are involved?
Thanks much
-Sravan

Hello;
One option is to setup a Cascading Standby. I tested this last spring and I'm happy to share my setup notes.
www.visi.com/~mseberg/Data_Guard_Cascading_Standby_Setup_and_Test.pdf
Also worth noting if you have Active Data Guard you don't need a second Standby, ( license for active Data Guard required ).
Best Regards
mseberg
Edited by: mseberg on Nov 22, 2011 7:09 AM
For additional information see :
Data Guard Concepts and Administration
12.1.3 Configuring Both Physical and Logical Standby Databases ( Oracle document B14239-05 )
In this case you could use the Logical Standby as you "Reader" database.

Help with syncing my phone after taking it off auto-sync

I turned off my automatic sync on my iPhone 5 (the option in the Summary that says "Allow this device to automatically sync when plugged in" or something like that) and now when I plug it into my Macbook Pro, it doesn't appear anywhere on my iTunes. I even checked on File > Devices and the menu options to sync it isn't clickable. Help!

Yes. Problem is, I don't believe there's any way to get the existing contacts into Google contacts.
If you set up the phone to sync your contacts to Google, you'll notice when you look at groups in your contact list on the phone (assuming it worked) that you have separate groups for contacts from your computer and contacts from Google. You can't move contacts from one list to another on the phone.
In iTunes you'll see there are options for what application you want to sync your contacts with. If you have a Windows machine, you can sync to Outlook or Windows address book. You may be able to extract the contact list on the phone by turning this on in iTunes.
WARNING: If you're going to do this, make sure you have at least 1 contact in the program you're going to sync to. If you do, it will ask you if you want to merge them. If not, the phone will be overwritten with the blank address book from the computer.

Help with OEM Clean-up after databases are dropped.

Similar Messages

Maybe you are looking for