Help with P5800 5.1 rear speaker problem.

I have the Inspire P5800 5.1
When I test the speakers with the Surround Mixer control panel I get the test voice on all 5 speakers. If I play a DVD with 5.1 Surround (Spiderman 2) I get no sound from the rear speakers. I have Soundblaster Live. 24 Bit. I am using ATI All-in-Wonder to play the DVD.
What could be my problem? I beleive it should be a set up in the computer, I just don't know where.
My computer skills are intermediate.
Thank you for any help,
Al

Using the Creative software (double click speaker icon in tray) then go to speaker setting make sure that you select 5.1 Speakers. If possible, try and download PowerDVD6 this software allows you change the speaker configuration to 5.1 etc...
You may also have this feature in ATI all in wonder. Check Audio options, make sure that 5.1 is selected or similar. It could also be that the ATI software does not support 5.1 only stereo 2 speaker.

Similar Messages

  • Rear speaker problem

    Hi, i have 4 speakers and a subwoofer. Mainboard is asrock xtreme4 which come with realtek hd audio.
    You may know the famous "rear speaker problem" on windows products. While speaker test just works fine, rear speaker never works on media player, winamp etc...
    But recently it become really interesting because, that rear speakers works fine on firefox browser 22.0. So it gave me hope the solve this problem once and for all.
    Right now, when i listening any thing on firefox, rear speakers works fine. But not working on Chrome and other stuff.
    What firefox 22.0 made to work speakers fine?

    hey have you tryed connecting other speakers to the bad connected one and see if it was not a bad channel? if so then let me know and I will look in to this problem more and try my best to get you the answers your looking for ok

  • Please, I need help with this 60GB ZEN Vision: M Problem... ASAP!

    I had to format my computer earlier this morning, and I have to do it again soon, but not before moving all my music files to another computer thanks to my flash dri've. Here's the thing now: My ZEN Vision: M decided to have a firmware problem when I really can't do anything. I have to Reload the Firmware (I believe), so I can update it with the new one. The thing is, I'm not sure if there's a problem here, as I tried connecting it with the USB thing, and said it found no hardware. Alright so... I try doing the Realod Firmware thing, but the firmware doesn't detect the player, and I've already hit Reload Firmware. Now I don't know what's going on with my ZEN and I can't check things out nor can I go install the CDs for the programs/drivers and whatnot,because I'm in a bit of a hurry. I can do it all tomorrow once I get home but I just wanted to know what I have to do, since it's pretty much been quite a while since I last did a firmware update and I don't remember what to do, anyway.
    Anybody willing to help? I'd appreciate it if this wasn't ignored like all my other topics in the last year, where I got little to no help at all. But I have been grateful of those who have helped me before. It's just been so long, really...

    When you connect the player use REAR usb port if desktop. If laptop direct connect to usb port NO HUBS. & At least 50% battery charge on the player. Boot the player in Recovery /Rescue mode then do a Format>cleanup Then connect to computer to see if Windows loads the driver or "sees" the player. If it does then disconnect it &? Open the firmware file & on the player choose reload firmware The screen on the player will prompt you to connect via usb? connect it. Now the Autoplay window may open DO NOT CLOSE IT (ignore it) The firmware file should see the player choose the upgrade & let it run. Good Luck

  • Gigaworks S750 Rear Speaker Problem

    I am having problems with the rear left speak channel. I have swapped the speaker with another one and so I know its not the actual speaker, more likely the chanel or the setup. I have cheked all wire and they are fine. Any ideas?

    I've found that all the connections are very fiddly - both into the sub and into the actual speakers. It might sound silly but disconnect and then reconnect everything. It seems to bring out a different sound quality everytime i do this. I've had problems with the side rears before now, but this method cured it.

  • Please help with strange monitor/Lightroom 4 interaction problem

    I bought a Dell Ultrasharp U3011 yesterday, and I'm now facing a very strange problem. It's sort of related to the common discussed issue of Lightroom's color management, but there is a twist here. I'll explain.
    The monitor I had been using (and still have) was a Samsung SyncMaster 244T. I had no problems at all with it.
    With the U3011, I've run into this problem:
    -When I view files in Lightroom 4, the colors are muted and contrast low. The same files seen in Xnview, ACDSee Pro (with the color management turned off), Digital Photo Professional (colorspace set to sRGB), are much more vivid. In Photoshop, if I use the default color setting, it looks muted like Lightroom (I'm guessing because Adobe products have default color profile set to ProPhoto RGB), but if I set the color profile to the monitor's profile, it becomes vivid and matches the other software I mentioned. If I use any other profile such as sRGB IEC81966-2.1, ProPhoto RGB, Adobe RGB, etc, it doesn't match the other software I mentioned. This is strange because the other ones match each other because they are set to sRGB, but in Photoshop, even if I set the color profile to sRGB, it still doesn't match.
    -In Lightroom 4, even if I use Soft Proofing, nothing changes. It's as if Soft Proofing is broken--it doesn't do anything, no matter what color profile I choose.
    -Now, here's the twist. I didn't have any of these problems when I use the 244T. This leads me to assume that the problem is how the U3011 is interacting with Lightroom. I did a quick comparison of opening up the same image on both monitors in ACDSee Pro, and they looked identical. (At this point, I had the U3011's preset set to sRGB. This is the only preset that makes the U3011 look identical to the 244T).
    Next, I did an experiment, and I was very surprised by what happened. This is what I did:
    With both monitors as a dual display setup, I turned on Before/After comparison in Lightroom (made sure both version had the same setting and look identical by copying the After's setting to Before). I then moved Lightroom's window so that one photo is seen on the U3011, and the other shows up on the 244T. And OMIGOD, they looked different! Why is this happening? I've already established that the same image looks identical on both monitors when viewed with ACDSee Pro, but in Lightroom, they looked different on each monitor.
    And then things got even more weird. When I dragged the Lightroom window fully to one monitor or the other, Lightroom actually started changing the colors right before my eyes as it responded to which monitor was displaying which photo! Lightroom was somehow interacting with the monitor in real-time. So if the Before looked muted on U3011 and the After looked vivid on the 244T, when I drag the whole window into 244T, the muted Before will stay muted for about a second or so, and then it'll suddenly change and become identical to After. And when I did the reverse (drag the window into U3011), the reverse also happened--the vivid After will stay vivid on U3011 for about a second or so, and then it would suddenly change and become muted. Lightroom was identifying each monitor's color profile setting and changing the images according to which monitor was doing the displaying, and when the images were split between the two monitors, Lightroom was slitting them into two different settings to match whichever monitor is displaying which side.
    So what the hell does that all mean, and what can I do to get Lightroom to display the photos so that they look the same as on all the other software I mentioned (so I don't have to play the guessing game of editing the images, export them out to other software to check how they turned out). Also, remember that I didn't have this problem with the 244T--Lightroom displayed the photos the same way as the other software I mentioned. The problem right now is that the U3011 is somehow causing Lightroom to display the photos differently, and no color profile presets in the OSD control can make them match.
    I need to solve this problem, or else my last resort would be to return the U3011 and try another brand/model and see if that helps.
    Any ideas?

    Yes, that's basically sensible advice you got there (but I was more succinct ).
    An important point that was mentioned over there is that you must not confuse document/source profile with monitor profile. They are both links in the color management chain, but they serve different purposes. The document profile defines the colors in a standard color space. The monitor profile describes the monitor's own native color space - its response to the RGB numbers it's fed. So one is translated into the other, by the application on the fly, through a normal profile conversion, and that way the colors appear on-screen as intended.
    If those two profiles/color spaces are roughly similar, as they would be in the case of an sRGB document displayed on a standard gamut display - then you can get by without color management. It won't look too far off. But a wide gamut monitor changes the rules, because its native color space is not similar to sRGB, it's much closer to Adobe RGB.
    Anyway, this is what color management is about. Any profile can be translated into any other. So in this context it doesn't really matter what color space the document is in - as long as you have a good monitor profile it will display correctly (within practical limitations). Lightroom is a sort of special case because its internal working color space is not one of the standard ones, instead it's a modified ProPhoto space with linear gamma. But the basic principle is exactly the same: source profile > monitor profile.
    Just to go a little more in-depth while I'm at it: When you calibrate a display you actually do two separate things. You first calibrate it to a more or less standardized response. But that's just a linear one-dimensional correction. It does nothing about how color is actually reproduced, how red is red for instance. The calibration is global and affects everything system-wide because it's read into the video card or monitor hardware.
    Then, once calibrated, a monitor profile is made. This is a full, complete and accurate description of the monitor's behavior, in three-dimensional color space. The precision level is much higher. This profile is used, by color managed applications like Lightroom and Photoshop, to display the image.
    Other applications that are not color managed will simply ignore this profile, and send the RGB numbers straight through to the display, unmodified. With a standard gamut monitor (and an sRGB document) the difference won't be too dramatic and you may not notice it unless you look closely. But a wide gamut monitor will make the difference jump out immediately.

  • Help with kernel and possible power supply problem

    From 2 days after getting my imac I had my first Kernel restart.  Since then I have done everything apple has asked.  Ram resets and removing everything from the imac itself To find that it still had a kernel problem.  The error messages are Plugnplay or spinlock usually but have also been various ones such as  Kerneltask.  I have done a full reinstall of the operating system and only installed official apps from apple store, adobe flash and silverlight and next day was a kernel error for plugnplay.
    The imac is currently in the shop for a look at but 2 phonecalls back saying they have had no evidence of errors. In fact its perfect for them.  The kernel is usually a few hours from turning it on but can go all day fine But they have had the imac almost a week.
    So the only thing I can think of is if it works great for them is either they are really lucky or have a different electricity supply/cable.  So this leaves me thinking as stupidly as if it is working perfect for them then could it be a surge protector or power supply causing the random crashes?  Even something to do with the power lead itself?  I am really pulling at strings and going crazy because the only other thing I have been told to do is spend a week at a time just adding one thing at a time till the error shows itself so could be months and months.
    i know kernel issues are historically hard to diagnose but any help would be great.  At the moment i have a £3000 paperweight on my desk thats only turned on a few hours a day  because I have no faith in it.

    Hi Joel,
    For the external drive issue try resetting your firewire ports.
    To do this, shutdown and disconnect the firewire devices from your computer and from each other if there is a chain of them. Now disconnect the power cords from both your computer and from the firewire devices. Wait fifteen minutes. Connect up again and see what happens. The FW ports on Macs have a 'self re-setting fuse" that requires all power to be removed for a period of time for re-activation.
    You may also want to try a PRAM reset if that doesn't resolve the issue. Sometimes this can also be implicated in FW problems. Shut down. Hold down the command option p r keys. Now start up, keeping the keys mentioned depressed until the chimes have sounded three times.
    Cheers
    Rod

  • Need help with MSI GT70 0NC-029NE bluescreen problems

    I've just bought this new MSI computer, and downloaded a few programs like skype, steam, origins etc. When I open all of them at the same time, the bluescreen appears saying; memory management. The computer has 8gb ram, so it shouldnt really be a problem.
    Would really be nice with some help on this as it is quite annoying   

    Quote
    The computer has 8gb ram, so it shouldnt really be a problem.
    The amount of memory is not the problem, but a fault with the memory, or the memory controller (in the CPU) could be the problem.
    Is there a particular program that causes this BSOD?

  • Help with Optiarc AD-5630A causing sleep problems

    I have an original Macbook pro 17" 2.16 Ghz Intel Core Duo, 120Gb hdd, 2Gb ram.
    The original superdrive fried, so I had to replace it. I picked up an Apple MacBook Air external USB superdrive and removed the drive from the enclosure to replace my fried one. I believe my old drive was a mitsumi, the new one is a Sony NEC Optiarc AD-5630A with firmware 1CHQ
    Ever since I replaced it, here's what's happening, and I can duplicate the problem reliably.
    If I put the computer to sleep (closing the lid or otherwise) with a disc in the drive, it becomes un-responsive after the computer wakes. Console logs show a constantly looping error:
    8/24/09 5:53:23 PM kernel IOATAController device blocking bus.
    This error will loop endlessly several times per second until I restart the computer. In the meantime, nothing can access the drive and the OS struggles with the sleep/wake cycle. Usually, ejecting the disc will result in the OS succesfully unmounting the volume, but the eject signal is not reaching the drive, so the disc gets physically stuck in the drive until a restart. The drive functions normally at all other times.
    Thinking the new drive was faulty, and following Applecare's suggestion, I replaced it with an identical unit, (actually the manufacture dates are only a month apart, September and October of 2008) but the problem still persists. At this point, I'm thinking that it's either a hardware compatibility problem or an incompatibility with the firmware version.
    This is a fresh install of OS X Leopard 10.5.8 on a repartitioned and erased drive. All software is up to date. I have reset the PRAM.
    This drive is (was) used in the newish iMacs, and obviously, the MacBook Air USB drive. Some googling shows that there are different firmware versions for this drive.
    Anyone have any insight? Please? Help?
    Here's the log entry from sleep to wake to the error:
    8/24/09 7:53:17 PM kernel sleep
    8/24/09 7:53:17 PM kernel Wake reason = EC LID0
    8/24/09 7:53:17 PM kernel System Wake
    8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=82 stateNumber=4
    8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:262 powerStateWillChangeTo: found flag=kIOPMPowerOn (2)
    8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:267 powerStateWillChangeTo: found flag=kIOPMRestartCapability (80)
    8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=82 stateNumber=4
    8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:262 powerStateDidChangeTo: found flag=kIOPMPowerOn (2)
    8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:267 powerStateDidChangeTo: found flag=kIOPMRestartCapability (80)
    8/24/09 7:53:18 PM kernel EIR is not supported.
    8/24/09 7:53:18 PM kernel IOATAController device blocking bus.
    Message was edited by: kevinro

    Anyone have any ideas? Anyone? If there's someone out there with a macbook pro using an internal optiarc drive, open system profiler and post your macbook pro model, what model number the drive is and what firmware the drive is running. Anyone? Please? (can you tell I'm desperate?)
    aaron - was applecare of any assistance? It sounds like you've got a problem compounded by a vm. I can probaly help you out - I do mac IT work for a living. Does your IOATA error loop like mine does, or is it just a couple entries in the log?
    To help narrow down the problem, shut down Windows and quit Fusion. Open console so you can watch the log. (make sure you aren't currently getting the IOATA error - if you are, restart) Then put your mac to sleep and wake it back up. See if you then get the looping error in the log. Whether the error is happening or not, make this behavior repeatable so you cna predict what's going to happen ie: restart, check log, sleep, wake several times so you know what's supposed to happen.
    What we want to know is, does the error occur independently of Fusion, or only when fusion is running?

  • Help with CS3 Adobe Version Cue Server problem.

    Adobe Version Cue Server (CS3) doesn't display in the system prefs, niether will install a working copy off of Install disc after removed. There seems to be no way to fix this, In bridge it can't connect. All I get is a bunch of errors.

    CS3 is known for the worst version ever of Bridge and also not supported any longer, you are using Bridge version 2 and current CC version is Bridge 6.
    Also Version Cue has been discontinued per CS5
    There is a blog post about a fix for a certain problem but not sure this is what you need (it is for a Mac), you can give it a try:
    http://blogs.adobe.com/jnack/2008/03/a_tip_on_photoshop_mac_stability.html
    Also keep in mind Bridge is not developed nor official supported for use over a network.
    And in general, when something happens with Bridge first thing to try is resetting the preferences holding down option key (Mac) or ctrl (Win) while restarting Bridge.
    But also I'm not sure you are in the right forum. Do a forum search about Version Cue using the Adobe Forums as source and see what result you get.

  • Need help with Mac Pro (2008) iCloud sync problem

    I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing.  I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files.  I then found that I did have another Mountain LIon partition in which the data syncing all worked.  Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work.  I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
    Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

    I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing.  I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files.  I then found that I did have another Mountain LIon partition in which the data syncing all worked.  Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work.  I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
    Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

  • Need help with new build. Possible gpu problem?

    MSI 970a-g45 board. This is my second build with the same board, but i am using a different GPU this time and i am unable to get the signal to the monitor.  my psu is an OCZ ModXStream Pro Power Supply - 500-Watt and the specs are as follows.  Wattage    500W
    SLI/Crossfire    SLI Ready
    Energy Efficiency    80 PLUS
    Fan    140 mm
    +3.3V    25 A
    +5V    25 A
    +12V 1    18 A
    +12V 2    18 A
    -12V    0.3 A 
    +5VSB    2.5 A
    my gpu is an MSI N440GT-MD1GD3/LP
    RAM corsair Vengeance 1600mhz 8 gigs
    cpu AMD fx 4100  3.6 ghz, quad core
    the only difference in this build from my last is the gpu. so its making me think something wrong with it..
    Any help would be greatly appreciated.

    do you have access to your 1st PC to swap parts for tests?

  • Help with Nokia Ovi Suite - Phone Space Problem

    Hello. I need some help. I have a smart phone Nokia 5530 XpressMusic. Well, the problem is, when i connect my phone to the Nokia Ovi Suite, and try to get some themes on my phone, i can't, because it says, that i don't have enough space on my phone. And when i check memory on my phone it shows: Left space: 2,5 mb And on memory card it says: Left: 2,5 gb. Why can't i then download anything on my phone anymore? Please help.
    P.S.: Themes are not too big, they're only about 1 or 2 mb.
    Using Nokia 5530 XpressMusic

    The problem is the lack of free space in your phone memory. Even though the memory card has plenty of free space - some content require still space in the phone's internal memory. And in many cases it requires more space than the actual file (if the file is decompressed in the device, it takes easily twice the size of the original package).
    Freeing space in the device's internal memory should help.

  • Help with ati open-source driver :what problems with my xorg.conf?

    I removed vesa driver and then :
    sudo pacman -S xf86-video-ati libgl
    I have browser http://wiki.archlinux.org/index.php/ATI
    I add me to the group video,add radeon to my rc.conf.
    and changed my xorg.conf like that.and then I type "startx",It did work,but the resolution is not right (it should be 1027x768 but I got a resolution 640x480),and I run glxinfo it said :"unable to open  display"
    I'm sure the     HorizSync VertRefresh is right besause when I try catalyst it works well :<
    my card is ati X550
    Here's my config:(can anyone who's ati card work with open-source driver works well give me your xorg.conf ?THX!)
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "radeon"
    Load "glx"
    Load "record"
    Load "extmod"
    Load "xtrap"
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "drm"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "ImPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 320 240 # mm
    Identifier "Monitor0"
    VendorName "KTC"
    ModelName "1700"
    ### Comment all HorizSync and VertRefresh values to use DDC:
    HorizSync 28.0 - 80.0
    VertRefresh 50.0 - 200.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RV370 [Sapphire X550 Silent]"
    Option "XAANoOffscreenPixmaps" "true"
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    Option "AGPFastWrite" "true"
    BusID "PCI:1:0:0"
    EndSection
    Section "DRI"
    Group "video"
    Mode 0666
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768"
    EndSubSection
    EndSection

    Ok, seems like you don't use [testing] because in this case x wouldn't even start, because RgbPath in the Section "Files" doesn't exist anymore and has to be removed.
    I do always recommend people to disable any kind of options in the Section "Device", if there are problems with the video card. You usually do not have to put radeon neigher into the Section "Module", nor into rc.conf! So remove them, radeon should be loaded because it's set as Driver in the Section "Device"
    Your problem with wrong resolution ... I'm not an expert in this, didn't ever have such a problem, but are you sure, that your HorizSync and VertRefresh values are right?

  • Help with 655 Max and Possible Memory Problems...

    Just recieved my 655 Max and have put my system together, but when I turn it on it makes a constant beeping sound. I tried taking out both memory sticks, lol, and turning it on and the sound stops, I tried putting in one memory stick and the sound starts again.
    I suppose this is a memory problem.
    by the way I am using Corssair 256mb CMX256a-3200C2 memory.

    [The alarm that you are getting is the CPU Fan Alarm you will have to diable it in the Bios. I am using a Vantec Aeroflow  heatsink and my CPU alarm also is constantly on and was very annoying till I disabled it. My system still doesn't boot to XP yet as I have RMA'd bothe the MB and Ram.   QUOTE]Originally posted by TritonB7
    Hey Kaiguy the comp does continue to make sounds till I shut the system off. And I'm not sure how a standard pc tone sound would sound like, :(. But it does make beep followed by a lower pitched beep, and it repeats this till I shutdown the system.
    (1) I cannot Access Bios.
    (2) I have two sticks of Corsair 256mb CMX256a-3200C2 memory. I do not have any other ram available that will be compatible with this motherboard. Ive tried using one stick at a time in each of the slots. No Luck.
    I highly think that both sticks not working is very unreal.
    (3) and reseting bios by the jumper isnt working either.
    I can probably try buying some diffrent memory, or returning the whole mobo and exchanging it for the same one.
    By the way on my monitor when i turn the comp on it says 8x Extreme or something close to it while the comp is beeping. I doubt that, that has anything to do with it. This is my first MSI board :( , I've always been an Asus person but Im still open for MSI i'm sure I just recieved a faulty board.
    [/QUOTE]

  • Help with wireless rounter model: WRT54G gaming problem

    hi guys, i always have problem using this rounter as people can not connect to my games because the rounter is blocking. so, what can i do to stop this problem?
    thanks

    get the port numbers from the game provider and forward the same on the router ..
    if you don't know how to access the router , click here .. on the web ui , click on the "applications and gaming" tab and go to "port trigerring" subtab and enter the port numbers you have ..

Maybe you are looking for