Help with some Flash banners

Hi, i need some help this week putting some Flash banners together. Anyone available to help out? I am based in London UK. Please DM me. Cheers!

What problem are you having?

Similar Messages

Help with some flash and flare

I am trying to do some cool effects to logo and have beat my brain senseless and can not figure out how to do it. I have attached a link to a video trailer that contains some of the effects I am trying to achieve can somebody maybe steer me in the right direction of how to achieve these effects.
http://dezertpeople.com/clips/dp5/DP5trailer_V1lg.wmv
Thank You,
Bob.
Mac OS X (10.4)
Mac OS X (10.4)

Many of these effects can be accomplished with Motion and 3-D animation software. I use Lightwave and PiXELS 3D. The logo effects could be replicated using a combination of animated light sources, volumetric lighting, and particle effects.
If you are not familiar with 3D animation software t, they have a very steep learning curv, take a substantial amount of time to render unless you have a render farm, but can yield impressive results. Compositing software like Shake is often used to incorporate animations with motion video.
Hope this helps,
Dave F

Help with a flash html inserting into DW

Hello,
I have created a enquiry section in flash for one of my html DW pages for my site. When I publish the flash doc ti creates a html page (Contact.html). When I open the flash html page in DW or upload it to my server, everything works fine. I recieve an email at my prefered destination etc etc. But as its only a section of my contact page of my website i need to insert it into my site page (get_in_touch.html) soon as i try and take all the stuff from contact.html and insert it into a div in my get_in_touch.html it doesn't respond when the submit button is pressed..... Can someone please help!!!!!
Dan

Thanks for all your help. I've managed to sort out the problem, still not
sure what it was.... My sites live now.
Just one question for you if you dont mind.
The page which has the flash on it (yes this one again!) Well if someone
goes to the page with out having flash player installed on their machine,
i'm looking for some script to detect that there computer doesn't have
Flash and redirect them to another html page I've created.
Would really appreciated any advice you may have.
many thanks,
Dan
                                                                                pziecina
             <[email protected]>
To
             09/09/2009 16:40                Daniel Herrington
                                             <[email protected]
                                             m>
                Please respond to                                       cc
             clearspace-571537347-50
             [email protected]                               Subject
                  ums.adobe.com              Help with a
                                             flash html inserting into DW
                                                                                Hi
Somewhere above your tag, you will have a line similar to this - Also in your tag the swf file -
These are the files that I said may be wrong or missing.
However if you just edit the flash generated page and include the items you
require in this, and maintain the same file position, you should have no
problems,
PZ

Help with my flash Nav Bar? [easy stuff]

hey guys, looking for a little bit of help with some simple
flash here, I have a flash banner for a website, there are 5
seperate buttons, the instance names are:
home_btn
about_btn
equip_btn
work_btn
contacts_btn
what code am i looking for to open each new page in the SAME
browser window that the index page first opens in?
i have this code for it right now but it's not working
because of the obvious conflicts:
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/index.shtml");
home_btn.addEventListener(MouseEvent.CLICK,goURL);
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/about.shml");
about_btn.addEventListener(MouseEvent.CLICK,goURL) ;
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/equipment.shml");
equip_btn.addEventListener(MouseEvent.CLICK,goURL) ;
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/work.shml");
work_btn.addEventListener(MouseEvent.CLICK,goURL);
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/contacts.shml");
contacts_btn.addEventListener(MouseEvent.CLICK,goU RL);
function goURL(event:MouseEvent){
navigateToURL(request);
any help would be much appreciated

You should eliminate what you know to be obvious conflicts
and then repost your code. Someone might be wasting their time
telling you something you already know.
For instance, you cannot declare the same function or
variable more than once, as you repeatedly do. Either each button
needs its own uniquely named/dedicated handler function and URL
(request) variable OR you need a handler function that detects
which button is the target of the event and assigns the URL to the
request variable via a switch or other conditional code which is
then used to process the page loading.

Help with Dreamweaver flash image viewer

Hi all
Would like some help with Dreamweavers Flash image viewer.
Everything is working properly except when i try to link a picture, and have set the imagelinkTarget value to _blank the link always navigates away from my site and does not open in a new window.
I have tried all the values for the imageLinkTarget and nothing works..
Here is my code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0','width','190','height','190','src','images/ad1','quality','high','flashvar s','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',sh owCo ntrols:false,frameShow:false,slideDelay:5,captionSize:14,captionColor:#000000,ti tleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageU RLs:[\'images/image1.jpg\',\'images/image2.jpg\',\'images/image3.jpg\',\'images/ image4.jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'http://www.bowlsaustralia.com.au\',\'http://www.smh.com.au\'],frameColor:#333333,bgColor:# FF9966,imageCaptions:[\'Bowls Australia\',\'Sydney Morning Herald\']}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash','flash_component','ImageViewer.swc','movie','images/ad1' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0" width="190" height="190">
          <param name="flash_component" value="ImageViewer.swc" />
          <param name="movie" value="images/ad1.swf" />
          <param name="quality" value="high" />
          <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verd ana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionColor :#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tr ue,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','image s/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" />
          <embed src="images/ad1.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:' Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionC olor:#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPla y:true,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','i mages/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash" type="application/x-shockwave-flash" width="190" height="190"> </embed>
        </object>
</noscript>
any help would be greatly appericated
Ken

I just googled and found lots of folks with the same problem. One fellow wrote this as a soluton:
"All you have to do is
remove the values from the imageLinks in the flash element. That
should fix it."
Does it?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Help with connection flash builder 4.5 to remote php database

help with connection flash builder 4.5 to remote php database

Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\php5\pear;D:/webserver/apache2/htdocs/ZendFramework/library') in D:\webserver\apache2\htdocs\giga\first-debug\gateway.php on line 27

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs

Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein

Help with some beginner code

Hello, I am new to java and I need a bit of help with some code that I'm writing. here is the code:
import javax.swing.*;
public class Test{
     public static void main(String[] args){
     JOptionPane.showMessageDialog(null,"We will now build a block with *'s","Block",1);
     String input=JOptionPane.showInputDialog(null,"Type a number: ","Number",3);
     int number=Integer.parseInt(input);
     int count=0; int count2=0;
     for(count2=0; count2<number; count2++){
          for(count=0; count<number; count++){
          System.out.print("* ");
System.exit(0);
}Now, all I need is to build a block of *'s with the number that the user inputs. With the code that I wrote I get the correct number of *'s but not in the form of a block. They just print out in a straight line. I know this is a very simple task but could someone please help me out? What do I need to modify in my code so that the *'s print out arranged as a block like so:
**********

Your code only uses the print method which prints without a carriage return/line feed. So you need to add a line of code to print a carriage return/line feed. Where? well that is your task to work out.

Help with Installing flash error- metafile cannot be loaded

I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old) in both clicking on them and also downloading by right click but they are dead links and even the download for it has no content.
Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
Bingo! that made the trick.
So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
Hope it works for you all

Need Help with a Flash Web Project

Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!

The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

Help with building flash files for streaming

I filmed a product demonstration for a client who wanted to put it on his website. I edited the footage in PremPro CS4 and exported to Media Encoder as F4V file format. After encoding imported footage into CS4 Encore, created timeline, chose, Flash from Format and swf for output. Progressive Download which allows video to begin playing as it is downloaded (I believe), chose destinations and settings. After transcoding I had 1 file folder, Sources that contained the following files _PGC_Bpge_entryPoint_Bbp_1.f4v, and then 3 separate files, *not* in the file folder called Sources. They are
AuthoredContent.xml, FlashDVD.swf, and Index.html.
I submitted all files to client who gave them to web designer. Designer said these were the wrong files and he could not use them. I called designer and basically he said I didn't know what I was doing. I told him he needed all files to put up the flash video. Anyway, am I missing something, doing something wrong? Are there other files he needs? He said he only needed 1 file. Or is it the designer? I'm not thin skinned so if it's me please tell me so, so I don't make the same errors. Thanks. All suggestions/comments are appreciated!

<The client wants a control player, i.e. play, stop, pause, etc., that's it, so the viewer can simply provide the function themselves. This is similar to youtube, blogger, etc.
The web designer can use what you provided, which does what you describe the client wanting. But the web designer may need to integrate what Encore provided onto a web page, and the client may not have made the expectations clear and may not know what is needed. As I said, the Encore to flash player gives almost no options for the player controls and colors etc may be problems.
<Encore did encode the f4v file. When I exported from PremPro what preset should I hve chosen -- mpeg2 DVD, flv/f4v. So the only file he needs in addition to what I gave him is the original f4v file?
I don't know whether the f4v you exported from Premiere was progressive. The f4v from Encore might be fine, or you might need to export from Premiere again.
The other issue is that some "player" with controls needs to be provided by you or the web designer (who may have an issue with the client not getting the designer to lay all this out to begin with). There are several threads about "flv players" you might check out. Does the client have video on his site already? If so, you can figure out what they are using, and it will help with your process.
should I have chosen "flash server" instead of "progressive". i must admit i never did this before. other clients just have me post it to youtube and provide them with embed code.
It depends on what they want.

Need help with adobe flash crashing my computer.

i use firefox is this a problem with adobe flash?

You might want to give some specifics. Other then my computer crashes with Adobe....Not to be a S.A but there are a lot of different Adobe programs and computers. You mention FF so Windows would be my guess, or you could be running Linux. Do you see the variables here? What kind of computer? Not a Desktop or Laptop or Dell or HP. Specs like GPU, CPU, Memory. Program running, what you were doing, etc. The more detailed you are the more a user can hop in and try and help you.

Help with some transitions

Hello, i'm trying to do add some transitions to my video. I want to do a intro like this: http://www.youtube.com/watch?v=aBPV0f6c56s
I have already written the swords, the texts and the central anime minecraft guy with Anime Studio, but i need to do this 3 things:
1. Am expanding cirle opening
2. A light/flash as transition between the first animation and the next logo
(I have another question, but more difficult: I want to do a sun rays effect from an angle)
All of these effects-transitions are in the youtube video that i linked.
Can someone help me with one of these questions?
I have Adobe After Effects and Premiere Pro.
Thank you for the attention.

The circle wipe is just that, a transition. Look in Effects>Transition. I'll give you a clue, a circle has a radius... It's there along with some more interesting effects.
You can also do a circle transition with a simple animated mask, use a scaled round layer as a track matte or about a hundred other combinations.
The light burst effect can be done with a simple masked white solid blend mode set to add and opacity keyframes or by searching your effects and pre-sets for light b. You'll find it. Just add it to a solid between your layers, set the blend mode to add and use an animated mask and opacity to bring in the effect. (the yellow thing in the middle is the animated mask that makes CC light burst interesting.
Same thing can be used for your sun rays. It's just a matter of layering and the shape of your mask.
Here again, there are dozens of ways to achieve this effect.
If you're completely lost then start here. This is basic enough AE that you shouldn't really need a step by step tutorial to pull it off.
Or as dave suggested, get Anime Studio.

Help with macromedia flash

Hi,
Can someone please please help me with macromedia flash? I have the release 9 version installed on an Arch i686 (32 bit) system. When I try to watch some videos I get the sound but no picture. (Foxnews.com videos are especially bad for this). Currently I am using Swiftfox from the AUR but I had 'Bon Echo' and it didn't work either. I've tried using konqueror but that says that there's no flash whatsoever on the machine. I figure I must have something wrong in my setup that's causing this.
Does anyone know where to look??
Thanks.

I have same problem
No flash in pages like Adobe's testing page or other. I installed flashplugin using "pacman -S flashplugin" also like wiki suggests, but in vain. Should I try the old "ln -s" method found in the wiki or what?

Help with USB Flash Drive

I am new to Arch and need some help with a usb flash drive. I have program the base system setup three times and I have got the same error message each time. Everything boots ok until it gets to mount the root device and that is when the error comes up. And yes I have done my homework and found that I need to change a file but I do not know which one and not sure how to.
I have learn more about Linux today than using it at work for over 5 years. Arch users have my highest respect for now I know why they love it so much. The reason I am working with the usb flash drive is I can not setup a hard drive right now for a couple of weeks and want to learn as much as possible before then.

Also, what homework led you to the conclusion that you needed to change a file. If you tell us where you learned this, we may be able to help with the process. If you want us to guess .... My guess would be that you should open /boot/vmlinuz-linux in a text editor and delete all the "7"'s.
(Kidding, hopefully obviously, don't do that).

Help with some Flash banners

Similar Messages

Maybe you are looking for