Help with some flash and flare
I am trying to do some cool effects to logo and have beat my brain senseless and can not figure out how to do it. I have attached a link to a video trailer that contains some of the effects I am trying to achieve can somebody maybe steer me in the right direction of how to achieve these effects.
http://dezertpeople.com/clips/dp5/DP5trailer_V1lg.wmv
Thank You,
Bob.
Mac OS X (10.4)
Mac OS X (10.4)
Many of these effects can be accomplished with Motion and 3-D animation software. I use Lightwave and PiXELS 3D. The logo effects could be replicated using a combination of animated light sources, volumetric lighting, and particle effects.
If you are not familiar with 3D animation software t, they have a very steep learning curv, take a substantial amount of time to render unless you have a render farm, but can yield impressive results. Compositing software like Shake is often used to incorporate animations with motion video.
Hope this helps,
Dave F
Similar Messages
-
Hi, i need some help this week putting some Flash banners together. Anyone available to help out? I am based in London UK. Please DM me. Cheers!
What problem are you having?
-
Help with some effects and transitions?
Hello, i'm trying to do add some transitions to my video. I want to do a intro like this: http://www.youtube.com/watch?v=aBPV0f6c56s
I have already written the swords, the texts and the central anime minecraft guy with Anime Studio, but i need to do this 3 things:
1. Am expanding cirle opening
2. A light/flash as transition between the first animation and the next logo
(I have another question, but more difficult: I want to do a sun rays effect from an angle)
All of these effects-transitions are in the youtube video that i linked.
Can someone help me with one of these questions?
I have Adobe After Effects and Premiere Pro.
Thank you for the attention.1. Dont know excactly what you want.
2. Filmflash transition is not default in Premiere. BCC has it for AE.
If you do not have bcc then look here.
http://www.youtube.com/watch?v=mIOAqO6Trvw
3. Sunrays: look for Redgiants Shine plugin. -
A little help with some code and theory
Hey guys, I'm kinda new to this whole programming thing so
bare with me please. I have a little problem that I just can't seem
to get my hear around. I have a working on an inventory management
page. It keeps track of what software is installed where and how
many copies we have, and serials and such. Well, this page was set
up long before I started here and it wasn't too friendly. So I'm
editing it and adding some new features. Well one of them is
displaying the “available installs count” with the
search results.
Here is my problem. The way the system keeps track of what
software is installed where is by adding taking the appId from the
table it with all the app's information on it (the sn, name, max
installs, etc) and creating a new entry in another table that
indexs that appId and the workstation it is installed on. (along
with an Install id) well the only way to check to see how many
copies is installed is to get the record count for a particular
appId.
This is where I run into trouble. When a user searches for
apps the results page displays the apps that still have installs
available. So where the record count of getInstallCount for
whatever appId is less than the max installs. Well what is the best
way to do this since to get the record count of getInstallCount I
need an appID and the appID isn't found until I do the search
query. What I'm using now is this but it always returns 0 for
current Install Count. See the attached Snippet of code:
I see what it is doing. It is getting the isntallCount for
all appIds, but I dont' know how to narrow it down without doing
the search first, and I don't know how to do the search with out
getting the install count first. Any ideas or advice would rock
guys. Like I said I'm kinda new to this programming stuff but it is
awesome! Thanks!
KevinThe w and wi are just table aliases that make it easier to
referrence those tables by column when joining multiple tables
(avoids having to prefix column names with the entire table name,
etc.) When doing a self-join (joining a table to itself), the use
of table aliases is
required, otherwise you would have no other way to tell
which column belonged to which "instance" of table.
The query itself is pretty simple. It is just using a
correlated subquery to select only those instances of
workstationApps where the count of appID instances in
workstationAppIndex is less than the amount specified in the
maxConcurrentInstalls for the same appID.
Also, I do see what you are doing with #form.searchType#, I
was just making sure that it was what you really intended to do.
Phil -
Hi all,
We have been provided with a range of public IP addresses by our ISP. I want to configure some static NAT in and dynamic NAT out for our SIP based PBX. I also want to put an ACL on the outside interface so only my ITSP can talk to the public IP assigned to the PBX. I want all other hosts on my network to be able to NAT out using the WAN address assigned to the router.
Obviously the addresses are fictional!
4.4.4.3 – Default gateway to the internet
4.4.4.4 – Public IP of my router
4.4.4.5 – Public IP for the PBX
10.1.1.0/24 – PBX subnet
192.168.1.0/24 – LAN subnet
1.1.1.1 & 1.1.1.2 ITSP addresses
10.1.1.2 - PBX LAN Address
Can someone take a look at my config, would this work!?
Thanks
Matty
interface GigabitEthernet0/0
description *** Internet ***
ip address 4.4.4.4 255.255.255.192
ip access-group 111 in
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
ip nat pool PBX_POOL 4.4.4.5 4.4.4.5 netmask 255.255.255.192
ip nat inside source list 101 interface GigabitEthernet0/0 overload
ip nat inside source list PBX_SUBNET pool PBX_POOL overload
ip nat inside source static tcp 10.1.1.2 5060 4.4.4.5 5060 extendable
ip nat inside source static udp 10.1.1.2 5060 4.4.4.5 5060 extendable
ip route 0.0.0.0 0.0.0.0 4.4.4.3
ip access-list extended PBX_SUBNET
permit ip 10.1.1.0 0.0.0.255 any
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 111 permit ip host 1.1.1.1 host 4.4.4.5
access-list 111 permit ip host 1.1.1.2 host 4.4.4.5
access-list 111 deny ip any host 4.4.4.5
access-list 111 permit ip any anyMatty
Not familiar with SIP so can't say for sure about that in terms of ports but some comments -
1) you don't show other interfaces but presumably the LAN interface(s) has "ip nat inside" enabled
2) the PBX subnet is 10.1.1.0/24 yet your static NATs are referring to 10.18.21.2 ?
3) following on from 2) your PBX_SUBNET acl is wrong, it should be -
ip access-list extended PBX_SUBNET
permit ip 10.1.1.0 0.0.0.255 any <-- note the last octet of the wildcard mask is 255.
Edit - also assuming that any internal subnets not directy connected to the router have routes setup for them so you router knows how to get to them.
Jon -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Help with a flash html inserting into DW
Hello,
I have created a enquiry section in flash for one of my html DW pages for my site. When I publish the flash doc ti creates a html page (Contact.html). When I open the flash html page in DW or upload it to my server, everything works fine. I recieve an email at my prefered destination etc etc. But as its only a section of my contact page of my website i need to insert it into my site page (get_in_touch.html) soon as i try and take all the stuff from contact.html and insert it into a div in my get_in_touch.html it doesn't respond when the submit button is pressed..... Can someone please help!!!!!
DanThanks for all your help. I've managed to sort out the problem, still not
sure what it was.... My sites live now.
Just one question for you if you dont mind.
The page which has the flash on it (yes this one again!) Well if someone
goes to the page with out having flash player installed on their machine,
i'm looking for some script to detect that there computer doesn't have
Flash and redirect them to another html page I've created.
Would really appreciated any advice you may have.
many thanks,
Dan
pziecina
<[email protected]>
To
09/09/2009 16:40 Daniel Herrington
<[email protected]
m>
Please respond to cc
clearspace-571537347-50
[email protected] Subject
ums.adobe.com Help with a
flash html inserting into DW
Hi
Somewhere above your tag, you will have a line similar to this - Also in your tag the swf file -
These are the files that I said may be wrong or missing.
However if you just edit the flash generated page and include the items you
require in this, and maintain the same file position, you should have no
problems,
PZ -
Help with my flash Nav Bar? [easy stuff]
hey guys, looking for a little bit of help with some simple
flash here, I have a flash banner for a website, there are 5
seperate buttons, the instance names are:
home_btn
about_btn
equip_btn
work_btn
contacts_btn
what code am i looking for to open each new page in the SAME
browser window that the index page first opens in?
i have this code for it right now but it's not working
because of the obvious conflicts:
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/index.shtml");
home_btn.addEventListener(MouseEvent.CLICK,goURL);
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/about.shml");
about_btn.addEventListener(MouseEvent.CLICK,goURL) ;
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/equipment.shml");
equip_btn.addEventListener(MouseEvent.CLICK,goURL) ;
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/work.shml");
work_btn.addEventListener(MouseEvent.CLICK,goURL);
function goURL(event:MouseEvent){
navigateToURL(request);
var request:URLRequest = new URLRequest("
http://www.fhwm.ca/contacts.shml");
contacts_btn.addEventListener(MouseEvent.CLICK,goU RL);
function goURL(event:MouseEvent){
navigateToURL(request);
any help would be much appreciatedYou should eliminate what you know to be obvious conflicts
and then repost your code. Someone might be wasting their time
telling you something you already know.
For instance, you cannot declare the same function or
variable more than once, as you repeatedly do. Either each button
needs its own uniquely named/dedicated handler function and URL
(request) variable OR you need a handler function that detects
which button is the target of the event and assigns the URL to the
request variable via a switch or other conditional code which is
then used to process the page loading. -
Help with Dreamweaver flash image viewer
Hi all
Would like some help with Dreamweavers Flash image viewer.
Everything is working properly except when i try to link a picture, and have set the imagelinkTarget value to _blank the link always navigates away from my site and does not open in a new window.
I have tried all the values for the imageLinkTarget and nothing works..
Here is my code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0','width','190','height','190','src','images/ad1','quality','high','flashvar s','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',sh owCo ntrols:false,frameShow:false,slideDelay:5,captionSize:14,captionColor:#000000,ti tleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageU RLs:[\'images/image1.jpg\',\'images/image2.jpg\',\'images/image3.jpg\',\'images/ image4.jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'http://www.bowlsaustralia.com.au\',\'http://www.smh.com.au\'],frameColor:#333333,bgColor:# FF9966,imageCaptions:[\'Bowls Australia\',\'Sydney Morning Herald\']}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash','flash_component','ImageViewer.swc','movie','images/ad1' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0" width="190" height="190">
<param name="flash_component" value="ImageViewer.swc" />
<param name="movie" value="images/ad1.swf" />
<param name="quality" value="high" />
<param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verd ana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionColor :#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tr ue,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','image s/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" />
<embed src="images/ad1.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:' Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionC olor:#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPla y:true,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','i mages/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash" type="application/x-shockwave-flash" width="190" height="190"> </embed>
</object>
</noscript>
any help would be greatly appericated
KenI just googled and found lots of folks with the same problem. One fellow wrote this as a soluton:
"All you have to do is
remove the values from the imageLinks in the flash element. That
should fix it."
Does it?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
Hello, I am new to java and I need a bit of help with some code that I'm writing. here is the code:
import javax.swing.*;
public class Test{
public static void main(String[] args){
JOptionPane.showMessageDialog(null,"We will now build a block with *'s","Block",1);
String input=JOptionPane.showInputDialog(null,"Type a number: ","Number",3);
int number=Integer.parseInt(input);
int count=0; int count2=0;
for(count2=0; count2<number; count2++){
for(count=0; count<number; count++){
System.out.print("* ");
System.exit(0);
}Now, all I need is to build a block of *'s with the number that the user inputs. With the code that I wrote I get the correct number of *'s but not in the form of a block. They just print out in a straight line. I know this is a very simple task but could someone please help me out? What do I need to modify in my code so that the *'s print out arranged as a block like so:
**********Your code only uses the print method which prints without a carriage return/line feed. So you need to add a line of code to print a carriage return/line feed. Where? well that is your task to work out.
-
Ichat video works with some people and not others
Can someone help me? I can video Ichat with some people and not others. HOwever, if the people I can video ichat with put me in a three way chat with someone I can't Icaht video with, it works. Here is the first half of the error I get when I try to call someone with whom it doesn't work:
Date/Time: 2008-05-08 20:59:35.554 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-05-08 20:59:21 -0400: AVChat started with ID 2203145046.
2008-05-08 20:59:21 -0400: scddean8: State change from AVChatNoState to AVChatStateWaiting.
2008-05-08 20:59:21 -0400: 0x1946a450: State change from AVChatNoState to AVChatStateInvited.
2008-05-08 20:59:24 -0400: 0x1946a450: State change from AVChatStateInvited to AVChatStateConnecting.
2008-05-08 20:59:24 -0400: scddean8: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-05-08 20:59:32 -0400: 0x1946a450: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: 0x1946a450: Error -7 (0x1946a450 cancelled the connection.)
2008-05-08 20:59:32 -0400: scddean8: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: scddean8: Error -7 (0x1946a450 cancelled the connection.)
Video Conference Error Report:
950.806728 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.000000 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK253ca464241b86c5
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 443
v=0
o=SDEAN 0 0 IN IP4 68.109.25.62
s=skiier526121
c=IN IP4 68.109.25.62
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:163897054
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:160:120:320:240
a=framerate:20
a=rtpID:4247390608
0.130320 @SIP/Transport.c:347 type=2 (00000000/0)
[ACK sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK758f935e51030677
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
0.131540 @SIP/Transport.c:2362 type=1 (00000000/0)
[SUBSCRIBE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.258925 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>;isfocus
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.266139 @SIP/Transport.c:347 type=2 (00000000/0)
[NOTIFY sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]:16402>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.3
Content-Type: application/conference-info+xml
Content-Length: 0
[<c-i v="0" st="f" en="sip:user@lip:16402">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
0.267647 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.3
Content-Length: 0
0.489410 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 24.9.170.64:16402]
0.809558 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=98115.00, NSDev=6.54%]
1.049428 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=1063830.90, NSDev=55.48%]
1.396681 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=1218589.60, NSDev=19.06%]
1.555003 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 8
[SECUPD:0]
1.555264 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
22.411383 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
22.552977 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
23.667085 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
23.667857 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0I found the following comment the other day that goes some way to explaining why iChat might have problems with some NAT routers:
http://www.technologyevangelist.com/2007/02/ichatav_the_bestun.html#comment-53326
While it doesn't offer any solutions it might be worth firing off some iChat feedback to Apple referencing it. It seems like it might be a trivial bug for Apple to fix and could well alleviate many of the problems people are having.
In the mean time if your router is one that has SIP ALG you could try disabling it and forwarding all relevant ports to your machine. -
Need help with Blog, Wiki and Gallery
Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh SinghHello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/ -
Help with connection flash builder 4.5 to remote php database
help with connection flash builder 4.5 to remote php database
Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\php5\pear;D:/webserver/apache2/htdocs/ZendFramework/library') in D:\webserver\apache2\htdocs\giga\first-debug\gateway.php on line 27
-
What's the phone number I should call for help with my iPhone and ihome dock?
What's the phone number I should call for help with my iPhone and ihome dock?
http://www.ihomeaudio.com/support/
-
Help with photoshop quitting and AMD graphics
help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do thoughHi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!
Maybe you are looking for
-
How can I down load a new app with out the cloud sign how do I get the sign off
II'm trying to down load a new app but every time I try all I get is the cloud sign how do I get rid of it
-
SALES Analysis and profit loss statment
Hi All , Dear Experts, My Sales Analysis and profit loss statement Value is deferent . i want to know that which entry show in sales analysis and which entry show in profit loss statment . Thanks & Regard AREEBA ALI
-
I don't know how much more I can add...However, when I type in the Norton Safe Search box up to the search button in Norton Safe Search I can continue to type but I can't see what is being typed because it doesn't allow me to see the trailing end of
-
Problem in BI configuration Wizard in Visual composer.
Hi All, I am trying to create iview in VC, when i am trying to connect to system via BI integration wizard , that wizard is not showing XMLA commections folder in available systems list. Kindly tell me what to do as soon as possible. Cheers
-
Lightroom 1.0 läßt sich nicht öffnen.
Hallo allerseits, ich habe Lightroom 1.0 auf meinen PC neu Installiert Window 7 nachdem ich alles angemeldet habe, Seriennummer grüner Hacken alles Ok, wollte ich das Programm öffnen, jedes Mal kommt wieder Meldung alles neu angeben, Seriennummer usw