Help with student edition

can i uninstall and reinstall cs5 (student edition) to a new device. i believe the student edition only permits installation on one device, but i've just purchased a new computer and want to know if following deactivation on my current device, i can install it onto my new device. any help would be greatly appreciated. i've read instructions on how to deactivate/activate etc, but none specifically addressed whether or not this was possible with a student edition.

Hi christopherklinck, Thanks for posting on Adobe forums. Yes, you can deactivate software from one system and Install and activate on the new one. If you face any issue please reply us back. Thanks Sandeep

Similar Messages

I need help with Cool Edit 2000

I need help with Cool Edit 2000. Can someone help me?

Message edited by moderator: maybe don't publicly post your serial?
Quite! Never a good idea, even with really old software...
jackm36094786 wrote:
Steve: What I have is a Serial # (?) xxx ID # 105368761 and a case # 3009176.I also have the program on my Gateway computer but I don't know how to use it. Is this of any assistance?
The program software should install fine (others report using it successfully) but the difficulty has always been registering it. To do this you need to find a program (that often people discard, unfortunately) called ce2kreg.exe and run that. That's where you enter your registration details, and how you get rid of all the noises that CE2000 will put all over your audio otherwise (unless you severely restrict the facilities you can use).
It used to be the case that if you'd lost the registration program but had the serial numbers, that Adobe would send you a copy of ce2kreg.exe, but somehow I doubt that they'd be willing to do this any more - it was a long time ago now, after all.

Need help with student verification

My daughter bought Adobe Acrobat XI Pro on Amazon new and then we followed the directions on Adobe to verify she is a student in high school. It has been 3 days and we still have not recieved the activation code to use our product? The Adobe support is horrible (I have been on the phone for hours with no one ever answering) and there is nowhere to submit a ticket.

Unfortunately there is no one in the forums that can do much to help you since most of us are product users like your daughter, and any employees here do not have much ability to process anything in your favor beyond possibly checking a status.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )
Another good resource for getting information is the student and teacher edition information forum:
http://forums.adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_?view=discussions

Help with multiclip editing in FCP

Can someone please help me with multiclip editing. I have followed all the steps in the tutorials I have watched but I am unalble to switch between the two angles in the time line. Also the red line in the time line is telling me to render everything first . Is that normal or is it because I am using the 5.0 version of FCP?

To switch between angles, the timeline should not be rendered. Once you render it, it may play more smoothly, but you can't switch.
Also, sometimes you may have trouble switching many HD files, so it might work better to use Media Manager to make lower resolution proxies for your editing, then bringing the full-res files back for your final output. If the computer can't handle the load, it may refuse to do multiclip editing.
Finally, you may need to switch Playhead Sync back to "Open" from time to time. For some reason, the Viewer sometimes switches to "Sync Off".
By the way, your question actually belongs on the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Help with student licensing

Hello! I purchased CS5 standard student edition from the university I was attending a few months ago for the discounted price. I've used CS4 for two years, and am still registered as a student under that version. My question is - Now that I graduated (in December), will I have any problems installing my new CS5 student licensed version?
Thanks for your help.
John

Hi John,
You said you already purchased it, but did you also prove your eligibility to Adobe and get a serial number? (they don't come in the student boxes)
If so, then you should have no problem after school... see the excellent Student FAQ.

New bee looking for applescript help with text edit app

I have a huge text files (20+) , I want to find a list of words like weather, farmers, ploughing. I want to find these words one at a time, as my text file is 250+ Mb in size.
I want applescript to count the how many times each word appears in the text.
Paste that occurrence of word into an spreadsheet file in a row named after text file , and in a column named weather, farmers, ploughing.
Please help.
Thanks much.
CF
PS so far I can open the text files with applescript, that is about the extent of my ability in programing.
Message was edited by: coldfusions onco

For a file of that size, you would need to use some shell utilities to get decent performance. To count words, the following script breaks up the text into words, then counts the number of times the specified word is found (a dictionary file is used as an example, so the match is equivalent to 'contains'):
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #DAFFB6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
set theFile to "/usr/share/dict/web2" -- a 2.5MB list of words
set someWords to {¬
{theWord:"weather", theCount:0}, ¬
{theWord:"farmers", theCount:0}, ¬
{theWord:"ploughing", theCount:0}}
repeat with anItem in someWords
set aWord to quoted form of theWord of anItem
try -- break up into individual words, then search and count
set theCount of anItem to (do shell script "tr -cs '[:alpha:]' " & quoted form of linefeed & " < " & theFile & " | grep -ic " & aWord) as integer
end try
end repeat
someWords
</pre>
Is this related to your Automator post?

Help with Exporting Edited Version of Picture

With iPhoto I an trying to edit (crop and adjust the color) of photographs. I have tried exporting the photo, but the cropping does not come over. Color changes come fine, but no cropping.
HELP?!?!?
Thanks.
B2

Cropping takes a few steps. Click Crop, choose a constrain ratio if you want, adjust the crop box to where you want it. Finally, click Crop again to perform the crop. When you click Done or select another photo you should get the message "Saving Changes" (or something to that effect) to let you know it worked.
Are you doing all of these steps?

Video newbie needs help with multicam editing

Hi all,
My video editing experience is limited to a few iMovie projects, which you can view on YT (search for TheChampsTube). For our final gig we did a 3 camera shoot, which was supposed to be produced by the videographer. But he dropped the ball, and now I have the files - a motley assortment of m2t, mp4, xml and sfk - I'm converting with Handbrake. My ancient iMac can't run FCP X so that's out. Also, I'm on a low budget, and will probably only need the software for this one project. Can someone recommend an inexpensive way for me to get this footage assembled? Any help is greatly appreciated.

You could try this technique.
Or borrow a friend's Mac that supports FCP X and download the trial.
Good luck.
Russ

Help with graphic editing

I think I have gotten myself in over my head. I am using the
FreeHand software, & I know absolutely NOTHING about graphic
design or this program. So, I'm hoping that someone with some
patience can help me out. I have downloaded a vector image & am
trying to edit it. The picture is of a flower. I basically only
need to change the background color & to change the overall
color of the flower. I have no idea where to begin. Any help?
Thanks!!!

Even though you have downloaded a vector illustration if it
was saved as
an EPS and brought into FH then it may or not be editable at
that point.
If it looks and acts like one piece of artwork (cannot
select
separate parts of it) and you cannot "Ungroup" it (Select art
> Edit >
Ungroup) then you are probably dealing with an EPS that FH
cannot edit.
Go to the Object Inspector and see what it says it is at the
top of
the panel when the artwork is selected. If it says Group or
Path or
Compound Path then you can edit. If it says EPS then you
can't edit.
You will need to crack it by using Illustrator or Distilling
to PDF. If
you are on a Mac you can open the EPS into the application
Preview and
it will make it a PDF. Then save it as a PDF from Preview and
open in
FreeHand.
Good Luck,
Rich
Dani0628 wrote:
> I think I have gotten myself in over my head. I am using
the FreeHand
> software, & I know absolutely NOTHING about graphic
design or this program. So,
> I'm hoping that someone with some patience can help me
out. I have downloaded
> a vector image & am trying to edit it. The picture
is of a flower. I
> basically only need to change the background color &
to change the overall
> color of the flower. I have no idea where to begin. Any
help? Thanks!!!
>

Help with sql edit

I'm starting out with Oracle, and was given a set of sql files, which SHOULD be used through the edit command in the sql commandline.
However im unable to run the entire text.
I can create a table, if i delete the INSERT parts of the text.
I'm also unable to run the INSERT part, unless i do it ine line at a time (basically using 4 files).
The sql file reads:
CREATE TABLE "CLIENT"
(     "CLIENTNO" VARCHAR2(4000) NOT NULL ENABLE,
     "FNAME" VARCHAR2(4000) NOT NULL ENABLE,
     "LNAME" VARCHAR2(4000),
     "TELNO" VARCHAR2(4000),
     "PREFTYPE" VARCHAR2(4000),
     "MAXRENT" NUMBER(6,0),
     CONSTRAINT "CLIENT_PK" PRIMARY KEY ("CLIENTNO") ENABLE
INSERT INTO CLIENT VALUES ('CR76','John','Kay', '0207-774-5632','Flat',425);
INSERT INTO CLIENT VALUES ('CR56','Aline','Stewart', '0141-848-1825','Flat',350);
INSERT INTO CLIENT VALUES ('CR74','Mike','Ritchie', '01475-392178','House',750);
INSERT INTO CLIENT VALUES ('CR62','Mary','Tregear', '01224-196720','Flat',600);
I have been messing about with various combinations of / and ; but I'm having no luck.
Does anyone have any ideas?

That didnt work, although im not sure why
there is a difference between run and @?
The run command lists and executes the most recently ran statement in the SQL buffer. The @ runs the SQL*Plus statements in the specified script.
test@ORCL> select * from dual;
D
X
Elapsed: 00:00:00.01
test@ORCL> run
1* select * from dual
D
X
Elapsed: 00:00:00.00
test@ORCL>If you are unsure what an SQL*Plus command does, you can use the help system.
test@ORCL> help run
RUN
Lists and executes the most recently executed SQL command or
PL/SQL block which is stored in the SQL buffer. The buffer has
no command history list and does not record SQL*Plus commands.
R[UN]
test@ORCL> help @
@ ("at" sign)
Runs the SQL*Plus statements in the specified script. The script can be
called from the local file system or a web server. Only the url form is
supported in iSQL*Plus.
@ } [arg ...]
where url supports HTTP and FTP protocols in the form:
http://host.domain/script.sql
@@ (double "at" sign)
Runs the specified script. This command is almost identical to
the @ command. It is useful for running nested scripts because it
has the additional functionality of looking for the nested script
in the same url or path as the calling script. Only the url form
is supported in iSQL*Plus.
@@ {url|file_name[.ext}} [arg ...]
test@ORCL>

PLEASE help with 24p editing mixed with 29.97

Hello--I am a newbie to all of this 24p editing. I shot a zombie movie last summer and have a MESS with the footage. Half was shot in 24p advanced mode on the Panasonic AGDVX100a with a 16:9 anamorphic lens, and half shot at 4:3, 29.97 with a Sony DVX2100.
I realize I need to "conform all of this footage".
Can I stay on a 29.97 timeline? I heard that dropping 24p adv footage onto a 29.97 timeline results in a "jittery" picture once output to TV.
Should I edit on a 24p timeline, and convert the 29.97 footage?
It seems that when I drop my 24p advanced footage into Premiere (CS4), on a 24p timeline--the fouth frame is identical to the fifth. Does this mean that pulldown removal is not happening correctly? How do I fix this?
Even if I do figure out how to edit on a 24p timeline, when I do my final render, what should my output file be? should I try a 24p DVD?
Also...This is an EFFECTS HEAVY film. So I need to do an edit in Premier, then render it and bring it into After Effects, do the effects, and do another render...then I will take that render back into Premier. Will this work? What render setting should I use? How will the pulldown be affected, if at all?
ANY HELP IS GREATLY APPRECIATED!!! I have scoured the net, but have not come across the right answers yet...please help!!!!

Hello orion,
Your HDR-CX550V records HD as MPEG4 AVC/H.264; and SD as MPEG2-PS. It appears to be an AVCHD camcorder (at least for HD video).
Storing your +original footage+ could be done at least two ways:
1 - record to removable flash media and save the Memory Sticks as your originals, as you formerly saved your tapes. (If I did my math correctly, you could fit up to about 6.5 hrs. HD video on a 16GB memory stick depending on the recording mode you select.)
2 - copy the +entire directory structure+ from the flash media to a hard drive; this is important, you need the entire directory & files from the root folder on down, not just the AVCHD folder or just the .mts files. Test this before committing to it as your archiving method.
The third way (and what I would probably do myself):
3 - Log & Transfer into FCE and then archive the resulting QuickTime .mov files to a hard drive. (Admittedly, this is technically not the 'original' footage because it has been transcoded to Apple Intermediate Codec; however the quality is excellent and should be almost indistinguishable from the original AVCHD video.)
If you convert the video files yourself (you mentioned iSkysoft), you need to convert to QuickTime/Apple Intermediate Codec to use the video in FCE.
FCP can handle 5.1 audio however the state of the art of these camcorders does not lend itself to direct import or conversion from the camcorder. Even the pros need dedicated 5.1 audio hardware. Frankly, 5.1 audio on these consumer camcorders is more a marketing gimmick than something actually useful at present.
The filenames 00001.MTS, 00002.MTS etc. are assigned by your camcorder and there is nothing you can do to change that. (Although you could rename the QT .mov files after you Log & Transfer from your camcorder).
- hoping this helps ...

Need help with audio edit - how can I censor myself?

Hello, all. I have a problem that I don't know how to solve.
Let me say, first and foremost, how much I dislike iMovie '08. I miss '06 so much! It was so straightforward and easy to use. This new (well, now old) version is so blocky and simple that it's completely backwards; I straight-up don't know how to operate it. And I'm a film student! It's so embarrassing.
Here's the problem. I'm working on editing a vlog for release tomorrow, and I need to "bleep" a bad word I say. I have the censor beep, and I have it anchored over the clip I want to censor, but I can't find a way to actually mute the audio from the video, so that only the bleep plays. At this point, I'm bleeping, but you can still hear the bad word. Completely ineffectual.
I've tried everything in my extremely limited arsenal to solve this problem, but no dice. Help!

Drag the mouse to select the video frames that you want to mute. A yellow border should be around them.
Then, EDIT//SPLIT CLIP (or right-click/Split Clip).
On this split clip, open the Audio Inspector and set the volume to zero.

Need help with an edit

I have an .avi that shows I can copy and paste selections ( not grayed out )
When I paste into a new window it does not work, paste is available from edit.
Divx doc shows an error when trying to repair ERR =-2009
any help would be appreciated

If I copy & paste into a new window, another window opens for second saying importing movie.
I have never seen this before when doing a copy paste.
It also does not work, it shows a black screen with a name of a cast member.
No sound or video when it plays.
any way to fix this and get it to work. I only want to use a small portion of the film.
It says movie format is divx 5.0
What about exporting to an editable form?
I'm just guessing as I'm a novice at this.

Help with Photo Editing

Hey everybody!
I need help. I manage the website www.finecharlestonart.com and if you look at the pictures of the paintings you can see part of the backgrounds. How can I remove the backgrounds in the pictures of the paintings? (not the paintings) I have alot of these so I need a way to do it easily and fast as I am not a photo editing person. I have GIMP and I would prefer not to have to buy photoshop or aperature. Thanks in advance!

Make sure that the layers palette is open in Editor, expert mode.
This is a 2 step process:
Open the picture with the fly. Use one of the selection tools, e.g. selection brush, lasso tool, to make a selection of the fly. When the selection is complete, you will see "marching ants" surrounding the fly.
Go to Edit menu>copy to place the fly on the clipboard.
Now open the picture with the mirror. Go to Edit menu>paste. The fly will be on its own layer. Get the move tool out of the toolbox, position the fly, and resize with the corner handles, if necessary.

Need help with Photo editing

I just installed elements 11 and was trying to create a photo for my daughter for my daughter by combining two pictures but can not figure how to do it, She has one picture with her niece holding a hand held mirror and another with the face of a fly and I need to insert the fly into the mirror and size it correctly. This seems like a simple task but I'm having trouble merging the two photo's

Make sure that the layers palette is open in Editor, expert mode.
This is a 2 step process:
Open the picture with the fly. Use one of the selection tools, e.g. selection brush, lasso tool, to make a selection of the fly. When the selection is complete, you will see "marching ants" surrounding the fly.
Go to Edit menu>copy to place the fly on the clipboard.
Now open the picture with the mirror. Go to Edit menu>paste. The fly will be on its own layer. Get the move tool out of the toolbox, position the fly, and resize with the corner handles, if necessary.

Help with student edition

Similar Messages

Maybe you are looking for