Manual Data Entry and Leading Sign in BCS

Hi,
can somebody help me,i need informations about the Leading Sign in the Manual Data Entry. Where can i make a field in the ucwb, to enter a Leading Sign at the Manual Data Entry in the ucmon?
Thanks in advance,
with regards,
Thomas Rettenmaier

Hi Thomas,
What exactly you mean under 'Leading sign'?
Best regards,
Eugene

Similar Messages

I have an iMac and the latest Firefox; however, I *can't* get auto-fill to work...I do a lot of repetitive data entry and auto-fill/auto-complete IS NOT WORKING

I downloaded the auto-fill app for firefox (latest version) and have the latest firefox version, yet none of the autofill works whenever i do it once.
i've even restarted firefox, shut down my iMac for a while, started firefox up again, nothing.
i do A LOT of repetitive data entry and this is getting frustrating for me to work from home.
help, please! *thanks in advance!*

We apologize that you are experiencing issues with some Firefox feature.
When typing in a text field, does is drop-down list appear when typing?
If not, please '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Difference Between Basic Date Scheduling and Lead Time Scheduling.

Dear FRndz,
Kindly help me out the difference between the Basic Date Scheduling and Lead Time Scheduling.
Regards,
SRini

Dear,
Basic scheduling :
1.Basic dates are calculated.
2.Exact to day.
3.No cap reqmts are generated.
4.Uses the inhouse production time from material master.
5.Carried out automatically during planning run.
In basic date calculation ( order start date/ order finish date ) the system always
calculates backward scheduling.
1. From the reqmts date the system subtracts the GR processing time to
calculate the order fininsh date.
2. From the order finish date the system subtracts the inhouse production time to calculate the order start date.
3. From the order start date the system subtracts the opening period given in scheduling margin key to calculate the order opening date.
Lead time scheduling :
1.Exact to second
2.ie production start date /time and finish date and time are calculated.
3. cap reqmts are generated.
4. uses times from routing.
5. carried out only if the scheduling mode in MD02 screen is kept with indicator 2.
From the order finish date the system subtracts the float after production to calculate the production finish date.
From the production finish date the individual operations in the routing are scheduled backwards to calculate production start date.
From the production start date the system subtracts the float before production
to calculate order start date.
Same thread.
https://forums.sdn.sap.com/click.jspa?searchID=19281092&messageID=3548465
Please refer this link,
[Difference|scheduling]
Hope clear to you.
Regards,
R.Brahmankar

Manual Data entry

Hello,
I'm in the process of transitioning from a paper procedure process to SAP router and POs. The procedures have many many pages for the operator to record data. What is the best way to convert this into SAP? I'm looking at inspection characteristics, the two problems I see with this, is the amount of time to create hundreds and the time it for the operator to input the data.
Any suggestions?
John Prior

Hi Thomas,
What exactly you mean under 'Leading sign'?
Best regards,
Eugene

First data entry and First consolidation

If I start new BCS system, will the Period and year of First data entry be the year and period of First consolidation?
I thinkt that it is not possible to track the Change of stockholder's equities in subsidiary from REAL starting period of acquition.

First:
There is one very important thing to know about "first consolidation period/year":
Lets say 12/2008
If you use carry forward, for example with movement type 100, then you are allowed to upload data into 12/2008 on movement type 100 and only then.
Second:
You need to assign an accounting technique to the consolidation group change and reporting.
Check this link:
[http://help.sap.com/saphelp_sem60ep1/helpdata/en/68/08d54276053258e10000000a155106/content.htm|http://help.sap.com/saphelp_sem60ep1/helpdata/en/68/08d54276053258e10000000a155106/content.htm]
Have a look at the table what those attributes mean.
BR

Extending DataFinder to include Non-Data Entries and Relationships Between Entries

I am trying to create custom data centralization and management software for our lab with DataFinder Toolkit. In addition to storing data from data acquisitions, I want to be able to store additional information with the data such as images, pdf files, word documents that can be easily accessed after finding the data. My current idea is to handle external files by storing the filepath in a property of an object vs trying to store the data itself in the datafinder database. My code would know how to open these files so the user can see them with external software or a custom labview app.
I also want to be able to store non-data objects such as an object that describes a piece of test equipment or a sample through properties and external files. Images and documents are again important here. And then create relationships through unique barcoded IDs that are a property in the datafinder entry. So not only could I look at the data, I could find information about the samples and lab equipment. Or anything else we think needs to be saved.
The code I am writing around DataFinder would be in charge of maintaining the unique IDs and know how the relationships between those IDs work to generate the proper queries. Like a 'Get Test Equipment Used' button next to a search result.
For the external non-data objects I was going to use Labview code to create a file with all the information about the object (unique ID, properties and external file paths) and create a plug-in so the datafinder will index the file and make it searchable.
Does this seem reasonable? I like the idea of working with one system and having everything update based on adding, deleting and modifying files in a folder. Also, I like the idea of not splitting the data management up into multiple technologies and having to make those work together.
Solved!
Go to Solution.

From the description, you've given the system seems plausible. The non-data elements you discussed when broken down are just additional data to associate with an object. Storing file paths seems plausible as done in the community example below:
Execute String/Numeric Querry Using Data Finder Toolkit
https://decibel.ni.com/content/docs/DOC-10631
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

Open data slice for data entry and close afterwards

Dear all,
I have created one data slice for a characteristic combination country xy in order to prevent the data entry within the data entry query for the user. But for some reason I have to run a planning function in order to summarize some values and write a total value in the characteristic e.g. country xy.
The planning function brings out an error message because this can not be executed due to the fact that this combination is protected.
Is there a way to open the data slice before the planning function is writing the data in the cube? I have tried to to this in the Data slice exit, but I do not have an idea how to open the DS, save the data and close the DS again.
We are running NW BI 7.0. Any ideas would be great.
Best regards,
Stefan from Munich/Germany

I did something like this by creating an FM and calling that FM from a FOX function. I think you will have to use three commands to execute three functions one after the other (and not combine them in one planning sequence) - first one will switch off the data slice, next will be your planning function containing the logic, and the last will switch it back on.
The FM would be something like below:
FUNCTION Z_SWITCH_DSLICE.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_INFOPROV) TYPE RSINFOPROV
*"     REFERENCE(I_DSNR) TYPE RSPLS_DSNR
*"     REFERENCE(I_STATUS) TYPE I
*** This function imports the name of a real-time Infoprovider and a Data Slice number
***        and a parameter I_STATUS. If I_STATUS is 1, data slice is activated
***        If I_STATUS is -1, data slice is de-activated
data wa_ds type rspls_ds.
select single * from rspls_ds
        into wa_ds
        where infoprov = I_INFOPROV
          AND objvers = 'A'
          AND dsnr = I_DSNR.
if I_status = 1.
   wa_ds-used = 'X'.
elseif I_status = -1.
   wa_ds-used = ''.
endif.
update rspls_ds from wa_ds.
ENDFUNCTION.
The Fox code will be like below -
CALL FUNCTION Z_SWITCH_DSLICE
    EXPORTING
       I_INFOPROV = <infoprov name>
       I_DSNR = <Data Slice Number>
       I_STATUS = <0 or 1>.

How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

CAT2 multiple person data entry and worklist

Hello everybody,
For our users we have created a multiple person data entry profile and everything is working fine. hours for multiple people can now be entered in CAT2. However, our users are now stating a new request: They would like to see the worklist aswell (just like with single person hour entry).
When trying to customize the data entry profile and making the setting for showing the worklist, SAP shows the message that multiple person and worklist are mutually exclusive, so not posible.
However, the request from our users doesn't seem that strange. Would anyone of you know a way to combine the worklist with multiple person hour entry?
Thanks in advance for your advice.
Peter Hageman

hi
As per the message frm SAP , standard way would not be possible , you may think of a enhancement for this.
Regards
sameer

User needs to see only one E&A database for manual data entry

Hi Experts
Please can you suggest a solution for the following requirement.
Requirement is that when a user log in to the Entry & Approval to entry the manual KPIs he should see only the one database which he is allowed to instead of drop-down and select the database which he has to enter the data as multiple models are created to Entry& Approval and Scorecards.
Tried to create model connection for the model and assigned to the user and when i login with that users also all the databases are visible and have to select a database from the list of databases available for entry&approval.
Thanking you,
Regards
Vinay.

More information, after running a profile trace the following 2 statements, the column with the default on a UDF returns a row while the other default does not. This might be the cause of this bug. Is the same logic to generate the object on
the subscriber used to generate the conflict table?
exec sp_executesql N'
select so.name, schema_name(so.schema_id)
from sys.sql_dependencies d
inner join sys.objects so
on d.referenced_major_id = so.object_id
where so.type in (''FN'', ''FS'', ''FT'', ''TF'', ''IF'')
and d.class in (0,1)
and d.referenced_major_id <> object_id(@base_table, ''U'')
and d.object_id = object_id(@constraint, ''D'')',N'@base_table nvarchar(517),@constraint nvarchar(517)',@base_table=N'[dbo].[repTable]',@constraint=N'[dbo].[DF__repTable__id__117F9D94]'
exec sp_executesql N'
select so.name, schema_name(so.schema_id)
from sys.sql_dependencies d
inner join sys.objects so
on d.referenced_major_id = so.object_id
where so.type in (''FN'', ''FS'', ''FT'', ''TF'', ''IF'')
and d.class in (0,1)
and d.referenced_major_id <> object_id(@base_table, ''U'')
and d.object_id = object_id(@constraint, ''D'')',N'@base_table nvarchar(517),@constraint nvarchar(517)',@base_table=N'[dbo].[repTable]',@constraint=N'[dbo].[DF__repTable__somein__1367E606]'
Pauly C

SharePoint Designer workflow - date display and number ;# signs.

Hi,
I have created a SharePoint Designer workflow with customized email messages sent to specified people.
I've got tow questions:
1) In the email message there are lookups for date.The date is displayed in mm/dd/yyyy format and I would like to change it into dd/mm/yyyy. Is that possible?
2) In the email messages there are lookups for a value from a list. the values are displayed with a number ; and # signs. For example 1;#PortfolioA 2;#Portfolio2. How can I eliminate the number,; and # signs and have the portfolio displayed only as
'PortfolioA"?
I will be grateful for any suggestion.
Thank you.
Jowita

Hi Jowita,
For the Date&Time column, you can create an additional column using Calculated type, and set the formula is: =TEXT([Date],"dd/mm/yyyy"), then when you design the email body in workflow, you can use the calculated column instead of the
original date column.
For the Lookup column, when you add it into the email body, you can set it returns field as “Lookup Value(as Text)”, like the screenshot:
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

I have 2 gmail accounts - one synchronises, one is grey, showing no data entry and a date 01.01.70 - any ideas how to fix it? (iphone5 /ioS /)

I have 2 gmail accounts on my iphone 5 with IOS 7 - a private and a business account. Both are set up exactly the same way, just the username and the password are different. One account synchronizes as usual via mail app, the other account seems to do the same thing as well but after synchrinizing this account is highlighted grey for a while. When I go to "all mails" I see tons of mails dated 01.01.1970 with no sender or content. After a few minutes I can use the account in a normal way again and all the " no sender " mails vanished. How can I fix the problem?
Thank you in advance for helping!

For me the same problem: 2 gmail accounts, one ore both have often the folder greyed out. After a reset by holding down both buttons it works for a few minutes then the problem is there again.
Also the same problem with the no subject 01.01.1970 emails (this was also there in previos IOS and never been solved!).
I have a 4S with IOS7.
For now my only solution is to switch to Mailbox.
Best regards

Using an MS Excel like template for data entry into an Oracle table

Does anybody know of a way, or development tool, that has the look and feel of MS Excel but can be used for data entry and be saved to an Oracle table and be embedded into a JSP page? I am currently using iSupport and have a need to allow users to enter data into an MS Excel like template, once the user saves the service request I need for the values to be saved in the attribute fields of the service request. I need the ability to map the cells of the template to the fields in the Oracle table. Any help would be greatly appreciated. Thanks in advance.

An Excel spreadsheet may be stored in database table .
http://www.oracle.com/technology/pub/articles/saternos_tables.html

External Drive for Manual Data & Time Machine Information?

Hi All,
I'm new to the MAC world, and I'm loving every minute of it. However, with my continued use of the MAC and populating it with data, I now want to move some files off to a External HDD for safe keeping.
What I'm trying to figure out is if I buy a External HDD for my MAC, can I use it for automated time machine use as well as manually moving and creatng directories for my data?
So here's what I'm thinking coming from a PC world on this extenral HDD:
1 - A Directory for my downloaded software from the internet
2 - A Directory for my Manual File saves (Documents, Files, Pictures, and iTunes)
3 - A Final directory for my Time Machine backups.
However I don't expect to leave this drive into my MBP all the time, so is it worth while doing it this way? Or should I go for a smaller External HDD to do my manual file backups and look at getting a time capsule for the time machine backups?
The only concern that I have with the time capsule is that I already have a wireless router in the household, and don't want that items features to conflict with the primary router. Though I do like the idea of the NAS technology to keep that data online and backuped without havng to manually plug a drive into my computer all the time.
Any advice you can offer to get me to my ultimate point of a space for my manual data backups and preferabbly time machine backups would be appreicated.
Additionaly thoughts about not using time machine are definately appreciated, based on the way I want to backup the data.
I should also mention that I would prefer to keep the cost low, as the MBP acquisition of course consumed some financial resources. But again the saving of my data is equally very important as well!

yes you can do this but you should partition the external hard drive in at least two parts. keep one partition dedicated solely to Time machine backups. Do not put any other data on that partition. there are a number of situations when you might need to erase the TM partition and start backups from scratch and having other data there makes it quite inconvenient.
Another point is that you should back up all your data, not just the data on the internal drive. a backup is a second copy of the data, not the only copy. so if you keep other stuff on the external you should back it up too. therefore, if your internal drive is not big enough to hold all your data, ideally, you should get two external drives. one for extra storage and the other for TM backups of everything. TM can back up both internal and external drives. a TM drive can be a regular drive or a Time capsule. that's up to you. and of course, there are financial considerations here but you'll have to figure those out yourself.

Manual Data Entry and Leading Sign in BCS

Similar Messages

Maybe you are looking for