Help with time zone setting not working in my treo 750

When I set my home time zone in the time setting option and I confirm the change, it does not take the change. The home time zone is always set to Pacific Standard Time. Does anybody knows how to fix this bug?
Post relates to: None

rcury4 wrote:
"Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
See #C10 in Time Machine - Troubleshooting
"Time Machine couldn't complete the backup to "Rick's Backup Disk".  An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
Not one of Apple's more informative messages. 
There's a problem with a file on your system.  See #C3 in the above link. It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, what you've done, and the results.

Similar Messages

  • Help with Time Machine Backups not working..

    Let me preface this by saying I have spent the last day scouring the internet for solutions to my problem. I have tried every option that I have run across and have had no luck in resolving my problem. As a last resort, I'm turning here in hopes that you can be of help.
    I have a 2012 Macbook Pro running Moutain Lion.  I use an external HD for my time machine backups.  I am having an issue with Time Machine not functioning.  The initial error message I receive when I attempt to use TM to backup is:  "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    I searched the forums and net and found several things to do to try and resolve this issue.  My computer will freeze out and not let me erase, or re-partition the the hard drive, so I switched it over to an older macbook of my girlfriends and am successfully able to erase, and re-partition the drive (using disk utility) as suggested by several forum postings I have read.  I am able to run disk verify and disk repair and both say the disk is "ok" with no issues.  The moment the erase and partition is done, her computer prompts a message : "Would you like to use this disk for Time Machine Backups" which tells me it is working properly.  When I move it back to my macbook pro and attempt to run TM backup, it will now work and copy about 10g of my 120g before shutting down with this error message:
    "Time Machine couldn't complete the backup to "Rick's Backup Disk".  An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
    If i attempt to re-run TM at that point, I get the original error message:
    "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    If I move the TM back to my Girlfriends computer and attempt to run TM, it will function properly and backup her entire harddrive.  When I erase and try again on mine, I always end up back with the same issues.  It's clearly something in my macbook that is screwing it up.  Can anyone please offer some help! I'd be much appreciative. 

    rcury4 wrote:
    "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    See #C10 in Time Machine - Troubleshooting
    "Time Machine couldn't complete the backup to "Rick's Backup Disk".  An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
    Not one of Apple's more informative messages. 
    There's a problem with a file on your system.  See #C3 in the above link. It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, what you've done, and the results.

  • Help - EXIF time and date not working correctly

    I am a long time Lightroom user and am trying out Aperture 2.1. I like it a lot but I just found a serious problem. I'm importing some old photos into my Aperture library, by referencing the files in an existing folder. The time and date for some of the files gets messed up. When I view these files in LR the time and date is fine. When I look at the "date created" in the Finder, the time is also messed up. For a photo shoot I did in Europe, the time for some images has the right date & time when converted to US time, but for some images it has the right date & time but as if it were in the US time zone. The files are all Nikon NEFs.
    Also, when I view the files in the Aperture import dialog box they are in the right order. But when they get imported and I'm looking at them in Aperture they are in the wrong order.

    OK, I give up. Turns out that after one successful import where the dates were ok, subsequent imports have the dates messed up again - whether in Quick or Normal mode. I also tried importing to a new collection, and also tried importing after rebuilding the library (via command-option click in the dock). Still hving this problem.

  • Help with Time Zone on Application Server

    We're running a 9.0.4.2 middle-tier on HP-UX. My users recently told me that the reports being generated are now showing in GMT and they used to be EST. When I run "emctl config agent getTZ" it returns "America/New_York". When I check my TZ environment variable that is set when the AS starts, it's set to "TZ=EST5EDT". When I log into EM, I see the refresh time stamp is +5 hours though, which would explain the date being shown in the reports. I've searched through the Oracle DOC's, but I can't seem to find anything to point me to the problem. Any help would be appreciated.

    Depending on how many rows are in there, you may find the database engine doesn't actually bother using the index at all, it's not until you have thousands of rows it really starts to make a difference.
    Weigh that up with the amount it'll slow down inserts, and you might find it detrimental to create an index. Definitely put in queryparams though, there's never an excuse for not doing that and as Dan says that'll speed things up a bit.

  • Help! HTML Data set not working in IE (but in all other browsers)

    Hi there,
    I am totally desperate - I built a master/detail region page using a HTML data set.
    http://www.atcongress.com/programme/continuousLearningByName.html
    It works fine in Firefox/Safari/Chrome/Opera.
    Only IE7 and IE8 give me grief - displaying javascript errors; apparrently it is not able to bind the HTML data table to the data set:
    The IE Javascript Error Console displays "
    'Spry.Data.HTMLDataSet' ist Null oder kein Objekt
    This is in German but you'll get the idea I presume?! Translation would be something like
    'Spry.Data.HTMLDataSet' is Null or not an object"
    Anyway, the source HTML data table uses spry as well. This works fine on all browsers. Maybe because the HTML is on the same page?
    http://www.atcongress.com/programme/continuousLearningTable.html
    Any ideas? Do you need more info?
    Please help - the system needs to go out to test users any day now!
    Andreas
    This is the entire message from the IE8 javascript error console:
    Meldung: 'Spry.Data.HTMLDataSet' ist Null oder kein Objekt Zeile: 30 Zeichen: 1 Code: 0 URI: http://www.atcongress.com/programme/continuousLearningByName.html Meldung: 'Spry.Debug' ist Null oder kein Objekt Zeile: 961 Zeichen: 41 Code: 0 URI: http://www.atcongress.com/_spryAssets/SpryData.js Meldung: 'Spry.Data.initRegionsOnLoad' ist Null oder kein Objekt Zeile: 4855 Zeichen: 65 Code: 0 URI: http://www.atcongress.com/_spryAssets/SpryData.js

    More info on my trial & error process -  error still in this case...
    I cleaned up the code in both the problematic file and the source file that they validate fine now wit the W3C validator:
    http://validator.w3.org/check?uri=http://www.atcongress.com/programme/continuousLearningBy Name.html&charset=(detect+automatically)&doctype=Inline&ss=1&outline=1&group=0&No200=1&ver bose=1&st=1&user-agent=W3C_Validator/1.1
    Data source file:
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.atcongress.com%2Fprogramme%2Fcontinuous LearningTable.html&charset=%28detect+automatically%29&doctype=Inline&ss=1&outline=1&group= 0&No200=1&verbose=1&st=1&user-agent=W3C_Validator%2F1.1
    I'd also like to mention again that the source html file also contains an HTML data set and spry code. No problems there.
    In  order to make sure that is not a problem of referencing external data I  also tried copying and pasting the source data table into the  problematic file so that it can be used as a local data source. Still  the same.
    Apparently the probem is the master/detail region part.  The working HTML spry file uses a standard HTML table whereas my  problematic one uses a master/detail region
    ANY help would be greatly appreciated!

  • NEED HELP with T400s ThinkPad, does not work!!

    Hey guys I'm new to this forum.
    Basically I purchased a T400s laptop 4 years ago and have been using it throughout college. Recently I have been having MANY issues and I can't pinpoint the hardware/software problem.
    It constantly overheats, TPfancontrol was able to moderate it for a while but now it is just rediculous. When I click on any application (ie internet explorer) it takes up to 30 seconds to respond, during those 30 seconds the computer would 'freeze'. I am unable to use it now. I tried running a HD diagnostic test but the computer overheated and shutdown before the test could complete.
    A friend has told me that it is probably a HD and RAM problem and that I should upgrade both. At this point I am wondering if I should just buy a new laptop.. I don't have the time to constantly try to fix this laptop and do not have $500 to send it in to get fixed with the risk of it happening again. Any ideas what this problem might be? PLEASE HELP!

    well overheating could be one issue.
    But given that your laptop is really slow even at the boot up, it could mean something else.
    Can you run a hdd diagnostic from your BIOS menu?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Help with ios6 upgrade - phone not working at all!

    I was upgrading my iphone 4 to ios6 over wifi and got to the point where the screen shows the usb connector and itunes symbol. I plugged it into itunes, but keep getting the error message that the iphone software update server couldn't be contacted. I've tried again and again for well over an hour, and have even tried a master reset on my iphone. I also followed itunes' recommendations and updated windows and turned off my anti-virus software, which I've never had to do before. I keep getting an error message whenever i try to update itunes or get itunes to recognize my iphone. Nothing works. Please help - as of now i don't even have a phone!

    Well I guess its good to know im not the only one. My son was able to do his touch with no problem. But my phone is on its 2nd reset. lovely.. an andriod is sounding better and better.

  • Help with Live View - Links Not Working

    Hello,
    I am having a problem with Live View.  It had been working just fine, until recently.  Now, when I load a site stored locally, the page looks normal and links highlight when I cursor over them, but when I click them no navigation takes place.  I just remain on the index page.  The site does test fine in IE8, Chrome, Firefox and used to test fine in Live View.  The same happens with all my sites.  No changes have been made to my system.  Maybe I changed a setting unknowingly?  Is there some type of setting that I am missing perhaps?  Any help would be appreciated.
    Jason

    Did you close and restart DW to see if that helps?
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • New to Mac, Help with Time Machine! Partition External HDD or not?

    Hey Guys I'm a new mac user
    I need help with  time machine
    I wanted to know how time machine works and what all does it back up?
    I have 2 hard drives one is of 1TB and one is of 320gb
    In the 1TB hard drive i store all my music videos and work stuff it is windows formatted
    The 320gb hard drive is mac formatted and I was thinking of making a partition on it one with 250gb for time machine and the remaining 70 gb for mac softwares and files. The ssd of my mac has a capacity of 256gb. I have read for time machine you need at least 2x the space of your ssd on your external hard drive but i don't understand if my ssd is only 256 and can store files worth 256gb why do i need double the space? Secondly if I choose to use the complete 320 gb for time machine will that be okay or even if i choose to partition it to 250gb for time machine will that be fine too? Or will I need to format my 1TB hard disk out of which currently only 300 gb is empty and partition that to 500 gb for time machine?
    I'm really confused every tells me to use time machine but do I need it? And what does it exactly do?
    Your input will be really appreciate thanks

    The reason that you want a partition (or drive) of 2-3 times the size of your boot drive for Time Machine is so that you can keep backups further back than just the current boot drive state - for that you'd need to make a clone of the drive rather than using Time Machine (see -> http://pondini.org/TM/Clones.html).
    For more information for backups in general, see -> Most commonly used backup methods.
    Note that you can't use Time Machine to backup a Windows partition.
    Good luck,
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

    SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
    KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
    web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
    Manjeet Singh

    Hi,
    According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
    Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
    that will eliminate this problem.
    Step 1: Open your Web Database in your Browser
    Step 2: Click the Arrow Under the Login ID (upper right corner)
    Step 3: Choose My Settings
    Step 4: Click the My Regional Settings Link
    Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
    Step 6: Click OK
    For more information, you can refer to:
    Warning Message about time zone difference between your computer and the regional settings
    of Sha...
    Thanks & Regards,
    Jason Guo
    Jason Guo
    TechNet Community Support

  • How to display system time zone if user time zone is not set?

    Hi,
    My application implicitely chooses ALA as time zone if the user time zone is not set.
    How do I check this?

    Hi,
    Try using these FM's
    TZON_GET_USER_TIMEZONE
    GET_SYSTEM_TIMEZONE
    Z_LOCATION_TIMEZONE
    You can set the timezone in sy-zonlo by using the 1st FM and setting sy-zonlo in your application.
    I think system takes ALA default because its the 1st timezone in the table.(check FM BWDT_LIST_TIMEZONES)
    Regards,
    Amit
    Edited by: Amit Iyer on Aug 25, 2009 3:38 PM

  • I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

    [Window Title]
    Microsoft Windows
    [Main Instruction]
    iTunes has stopped working
    [Content]
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    [Close program]
    This is what I got... sorry, not very tech savvy to copy the error message onto here...
    Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
    I share the frustrations of many here. HELP!!!!!

    Hi there Nok Saensanoh,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

Maybe you are looking for