Help XI version Standard

cannot open standard XI, the serial number is accepted but it does not recgnize the program.  the drop list on goes to X standard not XI

Hi Jimmy ,
You need to license it by log in with your Adobe credentials ,i.e your Adobe ID and password.This way you would be able to use your subscription and you would not receive any pop up messages further.
Please try and see how it goes.
Regards
Sukrit Dhingra

Similar Messages

  • Creating a new Search Help on a standard SAP table field?

    Good day, everyone!
    As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK.  They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX.  I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields:  a key value (that will go into AUFEX) and a text description of the key value.  This zTable is used in my report.
    While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before.  I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps.  AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
    Is this possible?  Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet?  Is there an existing thread or guide somewhere that can tell me how to do this?
    Thank you!

    Hi
    Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
    After creating your search help:
    A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
    B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
    But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
    Max

  • How to add a dynamic saerch help for a standard field

    Hi,
    As per my requirement I need to add a search help to a Satndard Field in PO.
    The search help is dyanimc.
    CAn anyone suggest how can we achieve this functionality.
    The values to be selected are stored in some Z table.
    Smriti.

    Ya,But In my case the value which is being displayed in the search help will depend on the value of werks being enterd in the PO.Taking the PO the Ztable will be queried and from there The value of unloading point will be calculated and displayed.
    So only adding the search help to the standard field will not help.

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • How to add a F4 help to a standard sap table field

    HI all,
    I have created a F4 help that gets the value from a custom field. Now i want to add this search help to  a standard table PRPS-USR00 field. but, when i selects the USR00 field and clicks search help button it says 'No Search help exist for this field'. How to Add ? Do i need to get the access key , go in change mode and add it .Will it work. Will this affect any other table if i add this search help.
    regards
    sandeep

    Hi,
    Where do you want to see this seach help which transaction if it is in any custom program then you use the events for F4 or else if it is any standard transaction then there might be any collective search help which you will have to enahance. Let me know the trnaction name and field name.
    Regards
    Tanweer

  • Enhancements:Search help addition to standard screen-field

    Hi Guys,
    I am trying to add search help to the standard screen field inco2 in transaction va02. for this I am trying to add inplicit enhancement point in include MV45AFZZ.
    I right click over the yellow line and create enhancement implementation in local object. the moment I choose my enhancemetn implementation and press enter, it gives me dump, Please nebody tell me where am I going worng, or Is my approach correct.....Please suggest.......
    thanks in advance

    Hi Anil,
    Can you please tell me how to approach for adding search help to standard screen field INCO2 in transaction VA02.

  • Adding elementry search help to SAP standard Collective Search help

    Hi,
    I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and activated to it.
    it got activated sucessfully.
    Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A.
    How can i do that?
    can i add it directly to MAT1_A (sell --->search help <MAT1_A> changes --> in included search helpss tab using + (insert icon) )
    Thanks & regards

    I solved my problem :
    I had copied standard elementary search help to MAT0M to ZZ_MAT0M and added some more fields and copied Database View M_MAT1M to ZZ_M_MAT1M and addedd same fields and  activated both.
    both got activated sucessfully.
    Now i have to attached the ZZ_MAT0M elementry search help to standard collective search help MAT1_A and this Z-search help shd appear on the first tab.
    so I just went to collective search help MAT1_A in change mode --> click on "+" icon addedd my ZZ__ search help, save and activated it.
    If you dont really care in which tab your search help shd appear, then the best option is to use Append Search help.
    Note : if you are directly adding your search help in collective standard search help, then its better to remove hotkey form your custom elementry search help, as, if not remove will lead to warnings or make sure that you have unique hotkey in that collective search help.

  • Quel est l'avantage à utiliser la version Team plutôt que la version standard?

    J'utilise Creative Cloud Team depuis une année avec mon équipe, mais le cout est conséquent et nous ne trouvons toujours pas d'avantages à utiliser cette version Team plutôt que la standard?
    Nous désirions utiliser le chargement des fichiers, pour partager nos documents, mais sans la prise en charge de dossiers, c'est vraiment impossible et inutile.
    Un document InDesign, sans ses fichiers liés ne sert à rien, ni pour y travailler, ni pour l'archiver.
    J'ai donc l'impression un peu de m'être fait dupé, avec un système de partage peu performant (par rapport à des outils comme drobpox ou google drive) pour un surcôut conséquent.
    Rien à dire par contre pour les aplications, mais la version standard les offre aussi!
    Merci d'avance pour votre réponse, j'espère vraiment que le transfert de fichier va être amélioré prochainement, on patiente depuis trop longtemps sans amélioration.
    Natacha

    BORZOI a écrit:
    Bonsoir,
    Cela ne résoud pas mon problème...
    Bonjour Borzoi
    Je ne sais malheureusement pas trop t'aider, mais dans le mail que  PECourtejoie t'a envoyé, tout en dessous, il y a une section "Les problèmes persistent"
    Si tu vas dans cette section, tu auras accès à un chat avec une vraie personne de chez Adobe.
    Je l'ai déjà utilisé deux fois et, chaque fois ils ont résolu mon problème.
    Ils sont très efficaces et très gentils.
    Parfois, tu dois attendre quelque minutes avant d'avoir accès au chat car ils sont tous occupé, mais ce n'est jamais très long.
    J'espère que cela va t'aider

  • Link to jdeveloper9i online help, html-version is broken

    the link to jdeveloper9i online help, html-version is broken.
    i guess the portnumber also shouldn't be in the link.
    link http://otn.oracle.com:8877/jdeveloper/help/
    from link
    http://otn.oracle.com/docs/products/jdev/content.html
    does not work

    Hi,
    I am receiving no problem with these links. The port number is correct. The link recommends IE 5.5. Check your browser. It could have also been a temporary problem. Try again.

  • Setting Java Version Standard Edition 6

    Java Platform Standard Edition 6
    Version 1.6.0 (build 1.0.0_02-b06)
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    #jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    any body can explain me which parameter change / registry & any other changes to convert new version use?

    any body can help me Plz.

  • Report or Query, check for Visio versions - Standard, Professional, etc?

    Hi,
    Just wondering if anyone knows a good method with 2012 of reporting on versions of Visio - e.g. Professional, Standard, Premium etc. I can't seems to find the breakdown anyway.
    I've seen similar queries created for ConfigMrg 2007 Reports, but with the 2012 Report Builder, its not so straightforward to copy and paste a SQL query in (I've tried successfully creating other reports, via "the "edit as text" button, but
    no luck with this sort of report).
    Any help greatly appreciated!
    Thanks.

    http://social.technet.microsoft.com/Forums/office/en-US/07a859bb-d1c8-49a7-8f4c-bcf81b887221/how-can-i-tell-if-visio-standard-or-pro-are-installed?forum=visiogeneral
    if key
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Visio\Solution\UML Solution
    exists then you have Visio Pro.

  • Help: WRT160N Version 3

    Hello,
    I have a WRT160N Version 3 with Time Warner Cable Road Runner in NYC and I am running the 3.001 Firmware.  Yesterday morning, it appears the connection reset  itself and now my wireless connection is either intermetinent, non-working, or extremely slow when it work.  However, my wired connection is operating normally.  I tried to resets and power cycles last night to no avail.  I am running one PC with Windows XP and a MacPowerBook, and of course Iphones and Blackberrys connecting wireless off and on, everything was running great up until yesterday.
    Could anyone please help or suggest a correction?  Is this a Time Warner issue or a router issue?  Is there anyway the Cable Company could have something wrong on their end that would affect my wireless connectivity?  I wouldn't think so if my Wired LAN connection is fine, but I am not sure?  Please help as this is extremely frustrating and tiring, I spent many hours trying to get this to work last night to no avail.
    Thanks
    Joe
    Solved!
    Go to Solution.

    If your Wired computer is working fine, then i don't think it might be the problem with your ISP. In these case you need to check the Wireless Settings of your Router. When you login to the setup page of your Router, you can make the following changes under the Wireless Part of your Router.
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now see if you can locate your Wireless Network and attempt to connect...

  • No output at all from weblogic.Admin HELP | GETSTATE | VERSION on linux

    Hi, somehow I am getting zero output from weblogic.Admin command, is it redirected somewhere?
    #>java -cp $WH/server/lib/weblogic.jar weblogic.Admin -adminurl $AURL -username weblogic -password $WPWD VERSION
    #>java -cp $WH/server/lib/weblogic.jar weblogic.Admin -adminurl $AURL -username weblogic -password $WPWD GETSTATE
    #>
    #>java -cp $WH/server/lib/weblogic.jar weblogic.Admin -username weblogic -password $WPWD HELP
    #>
    Thanks.

    Hi,
    You need to Run the SetDomainEnv.sh/cmd from the Domain_Home/bin and then you can execute the below Commands and they will execute succesfully
    Eg:From Windows Environment Same applies in Linux Environmet as well
    C:\Oracle\Middleware\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.Admin -adminurl  t3://localhost:7001  -username weblogic -password weblogic1 VERSION
    WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638
    C:\Oracle\Middleware\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.Admin -adminurl  t3://localhost:7001  -username weblogic -password weblogic1 GETSTATE
    Current state of "AdminServer" : RUNNING
    C:\Oracle\Middleware\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.Admin -adminurl  t3://localhost:7001  -username weblogic -password weblogic1 HELP
    Usage: java [<SSL trust options>] weblogic.Admin
            [ [-url | -adminurl] [<protocol>://]<listen-address>:<port>]
            -username <username> [-password <password>]
            <COMMAND> <ARGUMENTS>
    Hope it helps

  • Need help with customizing standard reports in Fusion Applications

    Hi,
       I have requirement to customize 'Asset Transfer Report' in Oracle Fusion.
       This report is a BI Publisher report and Data Model lies in folder '/Share Folders/Financials/Fixed Assets/Tracking/Data Model' and report lies in folder '/Share Folders/Financials/Fixed Assets/Tracking'.
        Steps which i have completed
       I am trying to customize this report, i followed the below steps
    Step 1:- 
       Copied Data Model into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/Data Model' and report into '/Shared Folder/Custom/Financials/Fixed Assets/Tracking/'
    Step 2:-
       Opened task 'Manage Custom Enterprise Scheduler Jobs for Ledger and Related Applications' and created a job with the following details.
    Job Definition
    Field Name
    Value
    Display Name
    XX Asset Transfers Report
    Name
    XX_ASSET_TRANSFERS_REPORT
    Path
    /FA/
    Application
    Financials Common Module
    Description
    XX Asset Transfers Report
    Job Application Name
    FinancialsEss
    Enable Submission from Enterprise Manager
    Job Type
    BIPJobType
    Class Name
    oracle.xdo.service.client.scheduler.BIPJobExecutable
    Default Output Format
    Report ID
    /Custom/Financials/Fixed Assets/Tracking/Asset Transfers Report.xdo
    Priority
    Allow Multiple Pending Submissions
    False
    Enable Submission From Scheduled Processes
    Yes
    User Properties
    Field Name
    Value
    PDF
    .*\.pdf$
    jobDefinitionName
    FAS430
    XML
    .*\.xml$
    jobPackageName
    /oracle/apps/ess/financials/assets/tracking/transfers
    EXT_PortletContainerWebModule
    Ledger
    Since the standard report has the below parameter i have created same set of parameters for the Job which i have created, but i do not know how to assign the list of values to these parameters
    Parameter Prompt
    Data Type
    Page Element
    Default Value
    Required
    Book
    String
    Text box
    Yes
    Currency
    String
    Text box
    Yes
    Period
    String
    Text box
    Yes
    Batch
    String
    Text box
    No
    Step 4:-
       Now when i navigate to schedule process, when i click Schedule New Process Button in the list of values i can see the job which i created. When i submit the job is completing with error.
       When i open the xml file, file is blank and no data is available in the file.
       When i open the log file i see the below error
    dummy file is deleted
    ================ BIPJobExecutable Execution Started ============
    OutputFile : /u01/APPLTOP/instance/ess/rfd/67068/out/67068.xml
    Request ID: 67068 ClassLoader is weblogic.utils.classloaders.GenericClassLoader@1c85c3a finder: weblogic.utils.classloaders.CodeGenClassFinder@1c85cb3 annotation: FinancialsEssApp#V2.0@
    RequestId:67068
    ReportID : /Custom/Financials/Fixed Assets/Tracking/FLY FA Transfers Report.xdo
    Process : BIPDocGen
    The bipJobID : 6252
    bipJobID is updated to ESSRuntimeService
    BIP_STATUS_URL is added to ESSRuntimeService
    ================ BIPJobExecutable is running in async mode. ============
    ================ Please check the ess status for more detail info. ============
        Am i doing anything wrong while creating the job?
    Note :- I created another test data model and report with 'Select SYSDATE from dual' and am able to see the report completing successfully.
    Please kindly help, i am failing to meet my deadlines.
    Regards,
    Prasad R

    Hello Jani Rautiainen,
        Thanks a lot for replying my question.
        This is the first time i am working with the BI Publisher reports and fusion applications.
        My requirement is to add few columns to the standard report with out loosing the functionality.
        I was not aware that there is two ways of doing this, i was always copying data model and report to a new folder and trying to create a new job for the report.
        As mentioned in the document 7.2.1.4 Using the Customize Feature    , i clicked on the more button on my report but i do not see the customize option. Do i need to have any specific role for this to appear in the menu? Please kindly let me know.
        Also i see below limitations while customizing report
    Limitations
    Following are limitations of the Customize report option:
    The Customize option is only available through direct access to the BI Publisher server using the /xmlpserver URL (for example:http://hostname.com:7001/xmlpserver). The Customize option is not available through the /analytics URL used to access Oracle Business Intelligence Enterprise Edition.
    The Customize option is available only for reports. The Customize option is not available for data models, style templates, or sub templates.To customize data models, style templates or sub templates and insulate them from potential changes from patching: Make a copy of the data model, style template, or sub-template and either rename it or place it in a custom folder. Ensure that you update any reports to point to the customized data model, style template, or sub template.
        My requirement is to add few additional columns which needs Data Model to be modified, Can i copy the data model to the custom folder and do my modifications and point this data model in the report(as mentioned in the point 2 in the limitations)? In that case, will the original report submission works?
    Regards,
    Prasad R

  • New update for Community Help application - version 3.5 now available

    Hi: just a quick announcement that the engineering team has released version 3.5 of the Adobe Community Help application.  This update is a very significant release that directly addresses a lot of the feedback that we’ve been hearing from the community.  The most significant changes include:
    Feature
    Benefit
    1.
    Tabbed Browsing
    Ability to open multiple pages   from multiple sources simultaneously
    2.
    Favorites/Bookmarks
    Ability to bookmark your   favorite URLs; note: we prepopulate a set of suggested bookmarks for you   based on the products you have installed.  Users can of course   add/edit/delete any bookmarks that they choose and can organize them via   folders, etc.
    3.
    Search/Browse History
    Ability to view previous pages   browsed or search results (including previously used filter options, search   collections, online/offline search status, refinements, and more).
    4.
    Flash Platform ASLR
    Ensures developers  only   have to download one copy of the ASR and not separate, multiple copies for   Flash vs. Flex, etc. 
    5.
    Revamped local content   download workflow
    The entire local content   download workflow has been reworked!  We have removed the pop-up dialog   box and moved the “content update” notification to the footer of the app as   well as the homescreen.  This ensures an uninterrupted workflow for   users who simply want to access content first and foremost.
    6.
    Performance improvements
    The team has worked especially   hard on improving the start-up and browsing performance by consolidating a   number of disparate server calls into a single initialization service that is   only performed at launch.  This enables us to cache a number of assets   and reduce network calls/dependencies.
    7.
    Silent application updates
    Similar to the changes in the   local content download experience, we have also revamped the update   experience for the application itself!  Going forward, app updates will   be downloaded in the background without interruption to the user workflow.
    8.
    Set-and-forget search options
    Search options are now sticky   from session to session – for example, if you check the Search Adobe   Reference check box for  Photoshop, the CHC will remember those options   the next time you open the app. This applies to refinements too.
    9.
    Much more!!
    Minimize to sytem tray (for PC   users only); upgrade to Flex 4.1 and AIR 2.5; and many, many other   enhancements, fixes, etc.!
    Note: many of these features were part of our earlier 3.4 release – as some of you know, we had to pull down that release shortly after launch due to server/hardware issues. So only a few users were able to update at the time.  CHC 3.5 is now a general release that will support all users and has been extensively tested to ensure robust performance and stability.
    To update your app, simply open the Community Help application from your hard disc or visit our download page on adobe.com:
    http://www.adobe.com/support/chc
    Please leave your comments/feedback here in this forum -- and feel free to spread the word!

    Hi Mark!
    I need to install latest Adobe Community Help silently to our corporate desktops. Are there any command-line syntax to do this and where I can download installer package?
    Thanks.
    BR,
    Teijo

Maybe you are looking for