Hey guys, im new at this.. help: "REDIRECTED RESTORE FOR DB2"

hey guys im new at this basis thing, i just need help and some tips about the redirected restore for DB2 in windows. may some of you guys can provide me guides on how to perform the restoration from tape drives and other devices. thanks! all the help would be greatly appreciated.

Hi Robert,
you can find various guides and papers here
[SAP on DB2 for Linux, UNIX, and Windows|http://www.sdn.sap.com/irj/sdn/db6]
and here
[IBM SAP DB2 Experts|http://www.ibm.com/developerworks/wikis/display/im/IBMSAPDB2+Experts]

Similar Messages

Hey guys, im new here. I was wondering if any of you have...

Hey guys, im new here. I was wondering if any of you have a step by step process of how to set up my this Linksys with my AOL Boradband 9.0 connection. thanks guys.
Later

I stay as far away from AOL as humanly possible.
Help fight lag! Wire up that gaming machine!!!!!

TS3772 Hi Team, I fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to vi

Hi Team, I am fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to play movie, any help please for someone who hasnt got a clue

where did you download the movie from?
what is it doing when it wont allow you to play the movie?
since you downloaded quicktime is it still asking you to download quicktime?

HEY GUYS ? New problem with the latest lumia 800 ...

Updated my nokia to the latest os and firmware via zune.
Now I cant access my about lumia option to check my os and firmware version
settings-----> about ( when i select the about nokia option screen goes black and again the settings screen comes.
anybody else have this problem? or can anyone help me?
and also I cant access my wifi option too..

Hi fawaz_ayad,
Thanks for your post. Did you update through the official path and installed all available updates?
What you are describing is known to be caused by using an unofficial method of updating using an incomplete update file.
If you see this behaviour after the update please contact a Nokia Care Point so they can perform the full update for you.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Hope this helps internet problems for some of you!!!

Hi...I was experiencing the same problem a lot of folks on here have been dealing with. In short, our MacBooks or MacBook Pro's showing that we were fully connected to a network but unable to get on the internet. I'm by no means a tech expert, but I just got BOTH my MacBook and MacBook Pro working. I sure hope this helps at least a few of you b/c this has been a MAJOR pain for me and it is definitely isolated to the MacBooks. I've got three other Macs and they've never had this issue. Here's all I did:
I unplugged and actually reset the wireless router by holding down the reset button for 10 seconds. Powered it back up.
Came back to my computers and once again the signal strength showed I was fully connected. Still no internet though. So...I clicked on the Airport signal strength icon in the upper tool bar. To restate, this already showed that I was connected at full strength but I had no internet. Anyway, I clicked "Other" or "Join Other Network" in the drop down list. In the next pop-up window, I entered the "new" network name. I even just used the exact same network name over again. My particular network used a WEP password, so I put the original WEP password in, clicked OK and bam!...Without even rebooting the computers, the internet is working like a charm on both MacBooks.
GOOD LUCK TO ALL! Lemme' know if it works!

Hi...I was experiencing the same problem a lot of folks on here have been dealing with. In short, our MacBooks or MacBook Pro's showing that we were fully connected to a network but unable to get on the internet. I'm by no means a tech expert, but I just got BOTH my MacBook and MacBook Pro working. I sure hope this helps at least a few of you b/c this has been a MAJOR pain for me and it is definitely isolated to the MacBooks. I've got three other Macs and they've never had this issue. Here's all I did:
I unplugged and actually reset the wireless router by holding down the reset button for 10 seconds. Powered it back up.
Came back to my computers and once again the signal strength showed I was fully connected. Still no internet though. So...I clicked on the Airport signal strength icon in the upper tool bar. To restate, this already showed that I was connected at full strength but I had no internet. Anyway, I clicked "Other" or "Join Other Network" in the drop down list. In the next pop-up window, I entered the "new" network name. I even just used the exact same network name over again. My particular network used a WEP password, so I put the original WEP password in, clicked OK and bam!...Without even rebooting the computers, the internet is working like a charm on both MacBooks.
GOOD LUCK TO ALL! Lemme' know if it works!

New to this help

hi all
i am using a flash menu in my website for the first time and
on uploading it and the index page etc to my service providers
online site builder the flash menu only comes up as a white box and
thats all i get.
what have i not done?
please help russ

also i realise i have to change the picture source to get the
pictures on the page.i thought this would be the same for the flash
element but cannot find a source in the script if you want to see
how it is showing up go to - www.caenesthall.co.uk

Very new to this: Cannot see code for a package in SQL Developer

I know I'm doing something wrong but I certainly don't know what. I'm looking for the code to go along with a package. I can see the procedures the package calls and I can see a list of procedures but I cannot see the code for those procedures. I have tried using describe on the pop up and I just don't see anything but a window showing me the parameters the procedure will use. I want to see the code it will use.
Can someone walk me through this or point me in the right direction?
TIA

I can only assume you're on 2.1 or 2.1.1 since you don't even say. If you click on the tree showing the various objects after establishing your connection, when you get to packages and you click the package you want, you'll see the spec. Now click on the plus sign and there should be 'package name' body. If you click that body icon, you say you still can't see the code?
Evita
Edited by: Evita on Mar 30, 2010 2:59 PM

Hey guys.... quick question about Restoring..

I presently have a blackberry pearl 8100 for tmobile. And I just bought a BB Curve 8320..which should be arriving some time next week..My question is..can I use my present restores or backups on my bb curve? because i have alot of text messages I want to keep..
Solved!
Go to Solution.

You are welcome
When you have restored your messages on the new device go to Messages, open menu and select
Options - General Options
Find the field "Keep messages"
and set it to "Forever"
Otherwise BlackBerry will delete old messages from time to time.
Message Edited by tbilisoft on 10-06-2009 04:45 PM

Hey guys i have an ipad 2 that wont reboot after i restored it

hey guys my ipad 2 wont restart after restored it it seems to be stuck on a loop can anyone please help me ?

Hi there zbrad1998,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

Is "What's this" help for 64-bit applications available in latest version of Robohelp?

We purchased Robohelp 9 recently. Before purchasing we called support to make sure context help ("what's this" help) is available for 64-bit applications. They told us that it's there. When we installed Robohelp 9, context help library for 64-bit applications was not there. We are thinking of returning the product. Has anybody come across this issue?

Hi all
Like Peter, I've not seen other reports. However, I'll temper this by saying that I'm on a 64 bit system and I do see an option for creating this type of help. I am aware of it and know how it works generically, but I've never created it and I am aware that it's fallen out of favor with Microsoft. So I am unsure of what "libraries" may be needed.
My own guess here is that support simply looked at RoboHelp and saw an ability to get at the What's this area of RoboHelp running on a 64 bit system and concluded that because it was there all was well.
Curiosity questiion here for alex-2012. Have you seen What's This help on any application running in 64 bit mode on a 64 bit system? Perhaps it's just a limitation of being in the 64 bit environment. I believe the ability for "What's This" is really governed by Microsoft. And since they have abandoned it, perhaps they never updated and distributed the supporting files needed on 64 bit machines. Just pondering that out loud a bit.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Is the NVIDIA GeForce GT 750M in the new MacBook Pro supported by Adobe for Premiere & After Effects

As the title states.
Is it worth getting the 15" MacBook Pro with the Nvidia graphics card over the 15" version without for use with both Premiere Pro & After Effects CC?
Thanks

Chrisstockwell wrote:
As the title states.
Is it worth getting the 15" MacBook Pro with the Nvidia graphics card over the 15" version without for use with both Premiere Pro & After Effects CC?
Thanks
Unfortunately, I've found that many of the users here are PC users. While they are helpful, it's rare to get anything beyond guesses for Adobe Premiere CC performance on Macs.
I've noticed that the list of "supported" GPU's is not updated all that much by Adobe. It took a while after last year's macs were released for that list to be updated with those GPUs. But the 750M has 2GB VRAM and pretty much any GPU with 1GB of VRAM or more can take advantage of the Mercury Playback Engine on Premiere CC (http://blogs.adobe.com/premierepro/2013/06/adobe-premiere-pro-cc-and-gpu-support.html) With CS6, if your card isn't on the "list" you could add it using that hack that people talk about but you don't have to worry about that with CC as the above link explains.
While the regular 15" Macbook with the integrated graphics card is probably good enough to edit w/ Premiere CC, I don't think you'll be able to take advantage of any GPU acceleration because of the lack of a dedicated GPU with 1GB of VRAM. I am running Premiere CC on an iMac with an AMD GPU that isn't on the list, but does have 1GB of VRAM so I can take advantage of gpu accleration (however, while it's smoother than "software only", it definitely has it's REALLY annoying issues). I'm sure it'd be better with a newer NVIDIA card (from what I've read anyway) but like you, it's hard to get feedback from many people on these forums who use macs.
Hope this helps. I for one would go with the 750M. It's more $$$, but I'm guessing it'll be worth it. Just a guess though. I wish someone with that laptop (or even a 2013 iMac with similar GPU) would chime in with their thoughts.

Redirected restore - automatic storage - using DB2 api not br tools

I've done 100+ redirected restores for non-automatic storage databases using TSM only using the DB2 api's - and not the BR tools .
Now, I'm challenged with a redirect automatic storage DB.
*SQL1277N Restore has detected that one or more table space containers are*
inaccessible, or has set their state to 'storage must be defined'.
DB20000I The RESTORE DATABASE command completed successfully.
The backup image gets read and the TAG's for the containers are build. I can see that by doing a "df" on the filesystem level. But as soon as the restores attempts to write data into the containers, I get the above error message.
Here are my steps:
1. offline backup using db2 api on source
2. create restore script
RESTORE DB DCC use adsm open 4 sessions TAKEN AT 20080722155529 on /db2/SCC/sapdata1,/db2/SCC/sapdata2,/db2/SCC/sapdata3,/db2/SCC/sapdata4 ,/db2/SCC/sapdata5,/db2/SCC/sapdata6,/db2/SCC/saptemp1 dbpath on /db2/SCC INTO SCC NEWLOGPATH /db2/SCC/log_dir with 16 buffers REPLACE EXISTING redirect parallelism 2 without rolling forward without prompting
3. drop the target db and clean out all sapdata's and saptemp
4. create db on target:db2 create database scc automatic storage yes on /db2/SCC/sapdata1,/db2/SCC/sapdata2,/db2/SCC/sa**
+pdata3,/db2/SCC/sapdata4,/db2/SCC/sapdata5,/db2/SCC/saptemp1 dbpath on /db2/SCC+
5. update target db cfg with tsm parms so that it will be able to read the TSM tapes. ie tsm_mgmtclass, tsm_nodename, tsm_owner, tsm_password
6. setup my dsm.opt with
+SErvername       redirect_restore+
and the dsm.sys with a new stanza
SErvername redirectrestore_
   SchedMode            PROMPT
   nodename             useagan1743ddb2_
   PasswordAccess       prompt
   COMMMethod         TCPip
   TCPPort            1500
   TCPServeraddress     unixtsm1p.ecolab.com
7. as root I run the /db2/db2<sid>/sqllib/adsm/dsmapipw password to make sure to have access to the tsm nodename.
8. execute restore script on target
RESTORE DB DCC use adsm open 4 sessions TAKEN AT 20080722155529 on /db2/SCC/sapdata1,/db2/SCC/sa
pdata2,/db2/SCC/sapdata3,/db2/SCC/sapdata4 ,/db2/SCC/sapdata5,/db2/SCC/sapdata6,/db2/SCC/saptemp
1 dbpath on /db2/SCC INTO SCC NEWLOGPATH /db2/SCC/log_dir with 16 buffers REPLACE EXISTING redir
ect parallelism 2 without rolling forward without prompting;

Hello Anke,
Looks like your create database statement is missing the collating sequence, codeset etc. Here is a database create statement I got from my sapinst for your reference:
create database SX1
automatic storage yes on /db2/SX1/sapdata1, /db2/SX1/sapdata2, /db2/SX1/sapdat
a3, /db2/SX1/sapdata4
dbpath on /db2/SX1
using codeset UTF-8
territory en_US
collate using IDENTITY_16BIT
pagesize 16 k
dft_extent_sz 2
catalog tablespace managed by automatic storage extentsize 2
with 'SAP database SX1';
Regards,

Hey guys i really need help with this problem...

Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.

Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help

Hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. help???

hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. I'm really upset about lossing it, if anyone one knows how to fix the problem or another way of tracking my phone that would be great.

The iphone 5 can only be located if connected to a data or mobile network. If in Airplane mode or switched off, it can't be found.
Check this article for more info:
iCloud: Troubleshooting the Find My iPhone app

Hey guys, im new at this.. help: "REDIRECTED RESTORE FOR DB2"

Similar Messages

Maybe you are looking for