Hey my windows 7 computer doesn't recognize my ipod? and my ipod is stuck in the connect to itunes screen and is low battery but doesn't want to charge? help
Plese help?
First my ipod didnt show it was charging but still turned on(it was dead) so i tried the hold sleep and wake button but my computer(windows 7) wont recognize it so its stuck on the connect to itunes screen.
PS i took it to get it fixed and they said they changed the battery not sure if that had anything to do with it????
please help and Thank You.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
My phone is stuck on the connect to itunes screen when i started to update it and when i connect it to itunes nothing happens. What do i do to fix it ?
Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
While I was updating my phone, there was an error and it's stuck on the screen where it has the cable connecting to itunes. I tried to connect, but it's stuck. I've tried different cables and ports, but nothing works. Is there anything I can do without erasing my phone? I can't remember the last time I backed up my phone and I turned off iCloud because of the space it was taking up. I keep shutting it down and turning it back on, but the same screen appears. If you think you have a solution, please share!
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
How can I fix my ipod coming up as USB cannot recognize device?
Did you find a solution?
My touch is doing the same thing. -
I have a Ipod Touch 2G that is stuck on the "Connect to Itunes Logo" How can I get it back in operating order with out the access to a home computer? Can anybody Help me? I need it back to work.....
Connect the iOS device to your computer restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
My iPhone is stuck on the plug to iTunes screen and it will not do anything what do I do because my computer has crashed?
Can you use another computer to restore?
-
IiPad is stuck in the iTunes connect screen. I have held the home button down while plugging the iPad in and still nothing. Hard reset isn't even doing anything. It's not even showing up under my computer. Please Help
Did you get a message that the iPad is disabled?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Just after updating Draw with Friends, my iPhone got the "Panic, just haning here" message. I tried to reset it and it got stuck on the screen with the usb connect to iTunes. When I connected to iTunes on my Mac, it kept giving an error message that the phone connected could not be restored because it was in recovery mode, recover then connect. The phone wouldn't recover... I finally got it to connect to iTunes by holding down the home and power buttons, connecting to computer and then let the power button off as soon as the apple appeared. It took all night to download the restore for the phone, then when I hit the restore iPhone button, it gets half way done and gives the message" The iPhone could not be restored. An unknown error occurred (14).
Read here > http://support.apple.com/kb/TS3694
-
What do i do if my ipod isn't recognized by my computer and is stuck on the connect to itunes logo?
So the ipod is stuck on the connect to itunes logo and when i plug it in it says device not recognized. I don't know what is wrong with it or what to do I tried everything and nothing works. Im so lost I don't know what to do at this point can anyone help. I would greatly appreciate it thanks.
See:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If not successful, try another computer tohelp determine if you have a computer or iPod problem. -
Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?
http://support.apple.com/kb/ht1808
http://support.apple.com/kb/ts1567
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help
My phone is doing the same thing. My computer acknowledges that I have connected my iPhone 4, however, iTunes will no longer connect or sync to my iPhone 4. I have uninstalled iTunes, Bonjour and all Apple products from my pc. I have re-installed them back on. I have reset my phone. I have emptied my temp folder. I have done everything. If my iPhone cannot update and sync with iTunes then I may as well get another phone from somewhere else. I am disappointed that I cannot resolve this issue.
Rebeccaspe31, were you able to resolve your issue? If so how? -
i got my ipod touch 4th generation and when i first connected it to itunes it would say device found on my computer but on itunes it would say no device found so im stuck with the connect to itunes symbol on my ipod touch like when u first turn it on
Try here. Start with the one the best fits your symptoms.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty -
my iphone 4 doesnt show up in itunes. it is also locked on the 'connect to itunes screen' when unplugged from the computer. help me!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
Maybe you are looking for
-
Photoshop CS 2 stürzt immer wieder ab
Ich nutze seit Jahren schon CS2 (vers. 9.0.2) unter dem Betriebssystem von Mac OS 10.6.8. Alles lief bis letzte Woche problemlos. Dann traten vermehrt Abstürze auf (Beim Speichern, beim Drucken, während der Arbeit an einem Foto, beim Öffnen). Es gibt
-
Exe minimizes on completion and cannot be restarted
Having an odd issue with my executable. Whenthe "Quit LabView" is not used the window will minimize itself in an odd way. At this point it will refuse to resize and the run button wont come back, so the user is forced to exit the software complet
-
find my iphone located it and I saw the notification a few minutes too late. Does anyone know how to get my phone back to me? I have thousands of pictures that i need for promotion and business, and I am willing to do whatever it takes to have my pho
-
When I click on "Organize Bookmarks," nothing happens
Also, when I hit "up arrow key, Apple key and B," still nothing happens. I can delete bookmarks by clicking on the bookmark and clicking on the Blue star and "remove bookmark," but this does not work on expired bookmarks. I'm on a Mac if that helps.
-
TS3694 Error message re purchased music
I purchased some music from iTunes Store and it won't sync to my iPhone. Here's the error message: "Some of the items in the iTunes library were not copied to the iPhone because you are not authorized for them on this computer." Computer IS authorize