Hi All How 2 add empty record to table control

Hi All,
If my table control has 10 records , and I want to add an empty record when i click a push button for that what is the procedure to do it. please send me the source code for that its Urgent.
Thanks&Regards.
Bharat Kumar .

Hi..
In the PBO Module which is called before the LOOP on Table control .
Give the code like this..
DESCRIBE TABLE ITAB.
if OK_CODE = 'ADD'.
TABCON-LINES = SY-TFILL + 1.
ELSE.
TABCON-LINES = SY-TFILL .
ENDIF.
This will give the Additional line always when you click the ADD(some) button.
<b>Reward if Helpful</b>

Similar Messages

  • How to add empty rows in table in smart form

    how to add empty rows in table in smart form?
    plz help me regarding this
    send me ur queries to [email protected]

    You will need to add some extra rows to the internal table that your table is displaying.  Use a program node to append additional rows with a key but no argument.
    Alternaively a template may me more suitable for your requirement than a table.
    Finally, please do not include you e-mail address in your question.  Your question and the answers provided to it are for the benefit of everyone in the Community.
    Regards,
    Nick

  • Asset related question - How to add a record into table ANLC?

    Hello experts,
    Could anyone tell me how to add a record into table ANLC?
    Thanks very much!
    Christina.

    how you want add?
    you want add direct in table???.
    Normally if yo post any transaction this table will update.
    ex;acquisition;
    chandra

  • How to add a column in table control

    Hi ,
       Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
       Can anyone help me on this please.
    Thanks in advance.
    Regards,
    Lakshmi.

    Hi,
    Ensure the following :
    1. After adjusting the database, you`ll have to use the database utility and activate the table.
    2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
    Now execute the program.
    Reward if helpful.
    Regards

  • How to add a field and table control to BP transaction.

    Hi,
    I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
    Can some on please help me if having a solution and with any relavant documents.
    Thanks in advance.
    Raj & Khader.

    Also explore with EEWB tcode.
    Refer this threads
    Re: EEWB
    Created New fields in Business Activity with EEWB
    Cheers
    Manohar

  • How to add check box in table control?

    Dear frnds,
    In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
    Any help are welcome from your side.

    Hi,
    Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
    & RSDEMO02.
    Another way:
    Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
    (make sure that column definition in itab/ddtab is of size 1 char)
    Also chek out this link:
    Add Check box in Table control
    Hope these help you.
    Regards,
    Anjali

  • How to execute multiple records in table control

    HI.
    I have a requirement that in table control user will select more than one row and when he clicks 'SAVE' it should go and sit in a custom table. how to pass more than one records.
    thanks & regards.
    sandeep

    Hi Sandeep,
    I understand your requirement .......
    See this standard program........
    <b>" DEMO_DYNPRO_TABCONT_LOOP_AT "</b>
    <b>Understand how DELETE button is working,inorder to delete multiple lines....Copy this program if necessary..OK.
    Simply,Replace DELETE statement with your INSERT statement to push records into your custom table....very easily you can do it.</b>
    <b>Reward all helpful answers.</b><b>
    Hope you problem is solved.</b>
    Regards,
    V.Raghavender.

  • How to add new field to table control data not displayed

    hi
    I have added some nwe fields to already existing table control added three new fields...
    though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
    but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
    pls suggest where the problme may be
    nishant

    First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
    If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
    CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
    but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
    REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
    before you show the screen.

  • How to color the records in table control.

    Hi,
    I have created a table control in which i want to add colors to it.
    It is possible in reporting,but is it possible in table control.

    You can do it,
    Just follow the code,...
    In PBO...
    PROCESS BEFORE OUTPUT.
    MODULE STATUS.
    LOOP WITH CONTROL TABCTRL.
    MODULE MODIFY_100.
    ENDLOOP.
    MODULE MODIFY_100 OUTPUT.
    DATA wa_tabctrl TYPE cxtab_column .
    LOOP AT TABCTRL-COLS INTO WA_TABCTRL.
          IF WA_TABCTRL-INDEX =  '1'.       "1- Your Respective Field Column's index
            WA_TABCTRL-SCREEN-COLOR = '2'. "Give your colour
            MODIFY TABCTRL-COLS FROM WA_TABCTRL.
          ENDIF.
    ENDLOOP.
    ENDMODULE.

  • How to add multiple records in table thru form via Submit button

    Hi all
    i have small requirement as follows.
    i have a view in which i have 3 UI elements one is webdynpro form,Table UI element and third one is submit button.
    now at runtime when i will enter the details in the form and click on the submit button then those record details has been stored in Table. then next time again when i submit the form with details then the table contains all records of current and existing ...so table has to maintain mutile records thru form via submit form..
    i need sample code on the same.
    points are always rewardable
    Thanks
    Sunil

    Hi,
    Create one context attribute and map it to the Inputfiled and one submit button, create a node with a valueattribute map it to a Table and in onActionsubmit write this code
    public void onActionsubmit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionsubmit(ServerEvent)
        String str=wdContext.currentContextElement().getInputfiledattribute();
        IPrivateTableformView.ITablenodeNode node=wdContext.nodeTablenode();
       IPrivateTableformView.ITablenodeElement ele=node.createTablenodeElement();
       ele.setNodeattribute(str);
       node.addElement(ele);
        //@@end
    thanx,
    ramani.p

  • In T-Code: MIRO ; how to add custom fields in Table Control

    In MIRO
    in PO Reference tabstip i want to add 2 custom fields ( say PO segment Invoice number and vechecle names i have to populate ).
    How to do dis ,
    any BADIs or any EXITS ????
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Regards,
    Ramesh.
    Edited by: Alvaro Tejada Galindo on Dec 29, 2009 11:24 AM

    ok

  • How to create vertical Scrollbar in table control?

    Dear All,
    How to create vertical scrollbar in table controll.?
    regards,
    Dharmesh

    Hi
    It should be created automatically, if you can't see it, try to set the field lines of table control
    PROCESS PBO
    MODULE SET_ATTR_TC.
    LOOP AT ITAB WITH .....
    ENDLOOP.
    MODULE SET_ATTR_TC.
    DESCRIBE TABLE ITAB LINES SY-TABIX.
    <TABLE CONTROL>-LINES = SY-TABIX.
    ENDMODULE.
    Max

  • How to add a record in document library without upload file.

    Hi,
    how to add a record in document library without upload file?
    Is it possible? I want to create a folders in Document Library but inside folders i do not want to upload a file instead of just i want to create a record. I will map my local file path to the records.
    Can anyone help me on it?
    Thanks & Regards
    Poomani Sankaran

    Hello Sankaran,
    document library is to upload documents, without document you will not be able to add a record or Item to it.
    for your requirement you can use a list and enable folders within the list and maintain the local path of the file as an item in list.
    http://www.sharepointbriefing.com/spconfig/article.php/3834951/Enable-the-New-Folder-Creation-Option-in-SharePoint-Custom-Lists.htm
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Hi All how to add new payscale  for an employee in sap hr-abap,its urgent

    Hi All ,
    how to add new payscale for an employee  in sap hr-abap,its urgent.
    Message was edited by:
            bharat kumar
    Message was edited by:
            bharat kumar

    Hi
    If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
    If that field is not there in the any of the structures then you can define a variable using define command
    /: DEFINE  &VAR&
    / &VAR&  = <some value>
    or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Hi All ,How to add a new  field for MEDRUCK if we havea ZMEDRUCK

    Hi All ,
            How to add a new  field for MEDRUCK if we have a ZMEDRUCK
    Req: If I want to add a new field for the following text editor line :
    IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
    In that we will have
    &ekko-waers&    &komkfkwrt&
    (currency)       (numerics)
    Pls send the Code to make these changes .Pls its urgent
    Thanks&Regards.
    Bharat.

    Hi
    If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
    If that field is not there in the any of the structures then you can define a variable using define command
    /: DEFINE  &VAR&
    / &VAR&  = <some value>
    or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
    <b>Reward points for useful Answers</b>
    Regards
    Anji

Maybe you are looking for

  • Movies Cover Flow Artwork Doesn't Show

    Since upgrading to v10.6.1 my movies artwork does not show in cover flow nor on my ATVs. When new movies are added the artwork shows for a few days then disappears. Using Get Info shows the artwork is present in the file, closing the by closing the G

  • I can't get ical events to overlap

    I can't get ical events to overlap. I prefer overlap as opposed to side-by-side. Help as to how to get overlap?

  • Why is DBXML doing a table scan on this query?

    I loaded a database with about 610 documents, each contains about 5000 elements of the form: <locations><location><id>100</id> ... </location> <location><id>200</id> ... </location> ... </locations> The size of my dbxml file is about 16G. I create th

  • Mexican Payroll - what to know ?

    Dear All, We are about to start a new payroll project in Mexico, and I have some questions : - What is the best time to go live ? Will it possible to go live in a middle of the year or should we start on january 1st ? - What are the legal tricks  ? -

  • Direct Select for Multiple Objects?

    Trying to fit a 3D box with a 2D skin that I made, and losing miserably. I know that using direct select I can move anchor points to fit the DIMs of my box, I cannot get Illustrator to use the entire layer, or group in its direct select though (Proba