Hi experts...file to file....one sender n no of recievers....

hi,
this is file to file scenario...sender side i have my file like...empno empfirst name emp last nem persno....here im sending one mesg...and it has split into n recivers depending on persno...any one can help me in this issue ...without using bpm....
Thanks in advance and for ans u'll be rewarded....
Edited by: hari prasad on Apr 2, 2008 8:51 AM

hi
you are creating the file to file scenarios
create the IR
and then create the ID
you are creating the one sender and n number of receiver for that you just give the condtion in interface determination
that is some condition satisfy then data goes to the perticular receiver
and just check it
I hope your prob will solved
thanks
Regards
vijay

Similar Messages

File-XI-File:one sender channel, multiple receiver channels on same BS

Hi !
We need to send some files from one server to another. On the source, the filenames have a fixed prefix and a timestamp. On the target, the files should have a fixed name (time stamp trimmed). We would like to use one sender channel with the advanced file selection option and for example 3 receiver channels, each channel for each fixed filename. All destination channels are for the same business service. And because we do not need mapping, and want to improve performance, we don't use the repository.
Is this possible? or because this only a 3 files scenario, we should make it as 3 different scenarios, each with its own sender and receiver channels?
Thanks,
Matias

Hey
>>But Ahmad, as mentioned in the blog, XI scenario without IR can be used only if it's non xml mesage. Is that right?
can you please tell me where it says this:)
is it this line which is confusing you <b>"Contrary to popular believe, the message or document sent thru XI does NOT have to be in XML format"</b> ?
well it just means that you can send any data(.jpeg,.pdf xml .xls or anything) by doin the bypass scenario.
IDOC's are something which can give u problems if you dont do IR steps(specially mapping)coz a lot of values need to be hard coded.but suppose ur doing a async File to RFC,then i guess you can do that by using the bypass scenario.
i won't count on bypass scenarios for all of my requirements,but yeah if both source and target have exactly same data type i will give it a shot,irrespective of the interface i m integrating.
Thanx
Ahmad
Message was edited by:
Ahmad

FTP Adapter batching multiple files in one send

Hello,
I'd like to set up a process in XI to allow me to group all files into one batch message and send the group all in one send every thirty minutes. This is an FTP adapter.
Do I need to work through a BPM to do this? Is there a good blog or forum topic on this?
Thanks,
Matt

That is exactly what I was looking for. Thanks.
I will test with the BPM and if the performance becomes and issue I will try your suggestions.
Thanks,
Matt

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

One sender File to Multiple CC scenario

Hi,
Iam working on simple file to file Scenario in that iam using One sender file to multiple Receiver Communication Channel,plz help me out

Hi,
Configure one Sender File Communication and n Receiver Communication channel for n receivers.
Also u need to have....
1. n Receiver aggrement.
2. n Interface determination
3. 1 Receiver determination.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

2 file to file scenarios and one sender channel

hello there,
i am implementing 2 file to file scenarios. referring to the below link i have 'by-pass' integration repository in order to perform my file to file transfer since both the input and output files have the same structure, hence no mapping is required.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417500%29ID0036662950DB01052533299951691312End?blog=/pub/wlg/4383 --> How to send any data (even binary) through XI, without using the Integration Repository
as seen in the link provided above, it is mentioned to provide a 'dummy' interface and namespace as no such things were created in the IR.
Now i have a second development which perform the same task(file 2 file) however the naming and source/target directory for the second one differs fromt eh first.
that is for the first one the source directory is srcroot/folder1/ and for the secon one is srcroot/folder2
the target for the first scenario is trtroot/folder1 and second is trtroot/folder2.
i wanted to use the same sender channel, making use of the advanced features to pick the files from the different directories, however the scenario always put my files, even those from srcroot/folder2, in the first target folder that is in trtroot/folder1 instead of trtroot/folder2.
one easy way of doing this, is to create channels for each scenario, but if possible i want to use one sender channels for both, is that possible for my scenarios?
can anyone please advise me?
if there is a better way, you are welcome to share it with me.
thank in advance.

Hi,
You can pick the data using same sender channel.
But there are two ways of putting the files to their corresponding destinatios:
1)Using 'Adapter Specific Message Attribute' in communication channel.
But for this to work you have write UDF in your mapping, but as you are not using IR part, this approach can't be used.
2) Another way is, you can use variable substitution method, where the values of the target directory is populated by payload of the incoming file.
If this is not possible, then there is no way but to define 2 diffrent communication channels for receiver.
-Supriya.

How to process files one by one using sender file adapter

Hi,
I have to process file one by one using my file adapter (sender), because while doing the G/R materials get locked, if the same materal exist in other files.
I have maintained QOS as "Exactly Once in Order" & processing Sequence as "by date".
Processing sequence come in which tab? What will be the Queue name?
Thanks,
krishna

It will come under Processing tab
Here you need to select the first parameter QOS as EOIO
Then QUEUE name and processing sequence will be enabled.
NOTE: This will work only for NFS protocol not for FTP.

File Adapter - Reading 2 files from sender and one file to receiver

All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
Thanks

Hi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu

How can one send email-sized photo files as attachments in Mail, without the photos appearing within the email?s

How can one send email-sized photo files as attachments in Apple Mail, without the photos appearing in the body of the email? If it can be done, it's not at all obvious, at least not to me. Thanks for any help you can provide.

The "View as icon" option shrinks the photo to an icon in the sender's Apple Mail, but how it appears to the recipient varies dependingy on what e-mail client he/she uses.
Using Apple Mail 5.0 (the Lion version) at both ends, the sender can use the "View as icon" option to shrink his view of the photo to an icon, but the recipient also using Apple Mail 5.0 still sees the full photo in line with the message text. The recipient can then use the "View as icon" option to shrink it to an icon, but I don't think that's not what jackofarabia is looking for.
As far as I know there is no way in the current Apple Mail to do what jackofarabia wants. There should be, but there isn't.

Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site. Do I need to purchase the complete one?

I have an IMAC 10.6.8
Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site. Do I need to purchase the complete one?

If you have iWeb V 3 you need to go to the Site Publishing Settings page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

TS3276 Hi. Just started using Mac Mail on a macbookpro v10.6.8. I tried to send a message with two excel (for mac) files attached. One attached as a file, one inserted all the text into the message body. Help?

Just started using my Mac Mail program instead of web mail. When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message. How do I get it to attach both pdf's as files?

I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
http://lokiware.info/Attachment-Tamer

Pl can any one send me fico tutor softwar files

pl can any one send me fico tutor softwar files

hi
the follwing links may be useful
http://help.sap.com/bp_bblibrary/500/bblibrary_start.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/7e/cb7d4f43a311d189ee0000e81ddfac/frameset.htm
regards
amulya

Synchronous file adapter sender side configuration in sap pi

Hi Experts
synchronous file adapter sender side configuration in sap pi
can you explain any one tell me step by step procedure?
Regards
Sagar

Hi,
You can use RequestResponseBean in the sender file adapter module .
RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
Request/Response Bean for IDOC_AAE adapter
Instead of IDOC_AAE adapter you can use FILE adapter.
Regards,

Additional Files in Sender File Adapter

Hi
I have to collect 2 files (IN.txt, IS.txt) and attach 2 files as an attachment to mail.
So I opted Additional Files in Sender File Adapter
Source Directory = D:\usr\sap\pitest\LoadTest\Output\Invoice
File Name = IN.TXT
Additional Files
File List <IS.TXT>
<IS.TXT>.namePart               ".TXT"=".TXT"
<IS.TXT>.optional                  NO
<IS.TXT>.type                       TXT
But I am able to Pick only one file (IN.TXT) from the Source Directory.
IS.TXT file is not at all picking.
Please give me your suggestion.

I reply just want to close this issue.
if file Name = Item.TXT and additional file name is ItemText.csv then configuration as following.
File List <Item.TXT>
<IS.TXT>.namePart               ".TXT"="Text.csv"
<IS.TXT>.optional                  NO
<IS.TXT>.type                       TXT
for namePart parameter, we should give the str which need to be replaced. for your example, we could give as <IS.TXT>.namePart               "IS.TXT"="IN.TXT"
replace all the file name.

Multiple files at sender File adapter

Hi,
I am new to XI and i am trying to do file to file scenario. My requirement is i want to send four files with different names from same directory to the receiver. Is it possible with one sender communication channel? If so can u please tell me how i can do..?
Thanks,
Naresh

Hi Naresh,
yes it can be done with single CC.
Check this blog:
XI/PI: how to exclude files in a sender File adapter?
Sachin

Hi experts...file to file....one sender n no of recievers....

Similar Messages

Maybe you are looking for