2 file to file scenarios and one sender channel

hello there,
i am implementing 2 file to file scenarios. referring to the below link i have 'by-pass' integration repository in order to perform my file to file transfer since both the input and output files have the same structure, hence no mapping is required.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417500%29ID0036662950DB01052533299951691312End?blog=/pub/wlg/4383 --> How to send any data (even binary) through XI, without using the Integration Repository
as seen in the link provided above, it is mentioned to provide a 'dummy' interface and namespace as no such things were created in the IR.
Now i have a second development which perform the same task(file 2 file) however the naming and source/target directory for the second one differs fromt eh first.
that is for the first one the source directory is srcroot/folder1/ and for the secon one is srcroot/folder2
the target for the first scenario is trtroot/folder1 and second is trtroot/folder2.
i wanted to use the same sender channel, making use of the advanced features to pick the files from the different directories, however the scenario always put my files, even those from srcroot/folder2, in the first target folder that is in trtroot/folder1 instead of trtroot/folder2.
one easy way of doing this, is to create channels for each scenario, but if possible i want to use one sender channels for both, is that possible for my scenarios?
can anyone please advise me?
if there is a better way, you are welcome to share it with me.
thank in advance.

Hi,
You can pick the data using same sender channel.
But there are two ways of putting the files to their corresponding destinatios:
1)Using 'Adapter Specific Message Attribute' in communication channel.
But for this to work you have write UDF in your mapping, but as you are not using IR part, this approach can't be used.
2) Another way is, you can use variable substitution method, where the values of the target directory is populated by payload of the incoming file.
If this is not possible, then there is no way but to define 2 diffrent communication channels for receiver.
-Supriya.

Similar Messages

JDBC and FTP sender channels stop polling

Hi,
We have a great volume of sender JDBC and FTP sender channels.
For this reason there is nothing unusual to have temporary error connections.
Several months ago, with an XI 3.0 system, sender channels recover its functionality automatically when temporary error connection is solved.
But now, he have migrate to a PI 7.1 sytem, and in the same scenario and configuration, sender channel stop polling after a temporary error . In cc monitor this channels remains in green status and there were no signs of stopped interfaces.
Timeouts are correctly defined and there is no difference between channel configuration in our Xi and PI system.
How to solve this problem?
Thanks, in advance.
Carme.

Thanks for your fast response, Stefan.
After writing this post, i ask the same question to our basis team and we are in the latest sp.
¿do you know if there is any note or can you provide me some additional information?
I'm not able to find any note about this issue...
Regards,
Carme.

File-XI-File:one sender channel, multiple receiver channels on same BS

Hi !
We need to send some files from one server to another. On the source, the filenames have a fixed prefix and a timestamp. On the target, the files should have a fixed name (time stamp trimmed). We would like to use one sender channel with the advanced file selection option and for example 3 receiver channels, each channel for each fixed filename. All destination channels are for the same business service. And because we do not need mapping, and want to improve performance, we don't use the repository.
Is this possible? or because this only a 3 files scenario, we should make it as 3 different scenarios, each with its own sender and receiver channels?
Thanks,
Matias

Hey
>>But Ahmad, as mentioned in the blog, XI scenario without IR can be used only if it's non xml mesage. Is that right?
can you please tell me where it says this:)
is it this line which is confusing you "Contrary to popular believe, the message or document sent thru XI does NOT have to be in XML format" ?
well it just means that you can send any data(.jpeg,.pdf xml .xls or anything) by doin the bypass scenario.
IDOC's are something which can give u problems if you dont do IR steps(specially mapping)coz a lot of values need to be hard coded.but suppose ur doing a async File to RFC,then i guess you can do that by using the bypass scenario.
i won't count on bypass scenarios for all of my requirements,but yeah if both source and target have exactly same data type i will give it a shot,irrespective of the interface i m integrating.
Thanx
Ahmad
Message was edited by:
Ahmad

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger

Hi All,
IDOC (Invoice) to EDI file scenario without Seeburger
Pls let me know if anybody have blogs for the same
EDI file to IDOC (Orders) scenario without Seeburger
Pls let me know if anybody have blogs for the same
Regards

Hi Rachit,
>>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
Also java code for IDoc to EDI have some problems:
1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
All the best
Regards
Suraj

File picked up by sender channel but not seen in CC monitoring nor in moni

Dear All,
It is a file to JDBC scenario where the sender communication channel picks up a file and sends it to several receivers interfaces ( 1 jdbc receiver channel). The file gets picked up by sender communication channel, but problem is that it does not get traced in communication channel monitoring, not even in message monitoring in RWB and SXMB_MONI. Thus no file processing. Sometimes this does not happen and the file gets traced in either of the monitoring tools. Please help as to why would this happen.
The scenario works correctly at times. its configured correctly. Please guide.
Thanks & Regards,
Priyanka Salvi

Hi,
Thanks. No, archiving faulty source files functionaly was not used earlied.
I enabled it by giving a path in the FTP server itself, but no files were placed there in the same case.
Please give me some examples of OS commands.
The file is picked up but it seems it is unable to read/forward for further processing.
This is because after the file is picked up, no messages are found with the outbound interface as well in message monitoring.
I am manually placing the file at the required path and the procsessing mode in CC is delete.
The receiver determination and all other configurations are correct.
I had tried by creating a new sender CC and deactiving the earlied one. Using this files were picked up and processed for few days and now again the same problem.

SAP XI File Adaptor (FTP mode) Sender Channel FTP commands

I have a service set up to communicate via ftp to an external partner. Their FTP server is secured to a point that I am unable to connect with normal settings. They claim that the FTP server follows the RFC 959 standard and therefore we should be able to connect and extract a file from their server. Not happening!
The question:
What are the exact ftp commands issued by a Sender channel configuration to an external FTP server? I have all the usual setting: user/pass/path/server/file (with wild card).
I can not find a definitive listing of commands issued by the file adapter in ftp mode to the remote ftp server. Not just a listing but an actual flow of commands issued would be useful.
Would appreciate some help/direction.
Thanks,
Mike

Hi Michael,
Please look at the FTP Server parameters...
1) if you have given the uncheck the anonymous login they can connect with out giving the username and password to connect to the FTP server...please check this paramerter and also make sure that if are mainting the username and password it should be the same they are using to access the FTP server.
2) Please check the port and ip address
For more information i would suggest you to look at the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
Could you please reply us what would be exact problem u r facing?
Thanks and Regards,
Chandu.

Why won't Firefox suddenly won't display SoundSlides files -- new and ones displayed in the past? I've cleared history, cookies, etc. Also deleted and reinstall

Firefox will no longer display our university news website news.wsu.edu correctly, AND it will no longer display SoundSlides files that we have posted. See our front page at news.wsu.edu as well as SoundSlides example at http://news.wsu.edu/pages/publications.asp?Action=Detail&PublicationID=32021&TypeID=1
Have tried deleting and reinstalling Firefox. Deleting all history, cookies, etc.

It works ok for me but then I am not using Flash 11.3 on Windows.
I can see http://news.wsu.edu/ ok
When I try http://news.wsu.edu/pages/publications.asp?Action=Detail&PublicationID=32021&TypeID=1. I get a mainly blank page with an error message
Microsoft OLE DB Provider for SQL Server error '80040e07' 
Error converting data type char to int. 
/Includes/SiteIncludes.asp, line 30
Possibly the link is not quite correct. (trailing dot ?)
Selecting a "sound slide" does however work ok for me I get a slide show with very loud music.
* e.g. [http://news.wsu.edu/pages/publications.asp?Action=Detail&PublicationID=32021&TypeID=1]
* screenshot attached
'''It appears it works for me. Possibly you have a problem because of Flash Player 11.3 use. You may find it works if you downgrade to FlashPlayer 11.2 or 10.3''' There have been known issues with FlashPlayer on Windows Firefox systems. Developers from Flash & Firefox have been working on the problem, but despite new updates to both FlashPlayer and Firefox in recent days, problems may still be occurring.
Note also there is a related but separate problem on some systems with RealPlayer. If you have Real Player installed please say so, and especially mention if that includes video download or recording options.
The current standard response to the Flash Player 11.3 (Windows Firefoz) problem is as follows, (but advice may change over the next few days):
Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!
This is the sort of thing that your own IT department may well be able to help offer advice on, and if it is the problem I suspect, then it is likely to impact on many site users.
They may also be interested in the possibility of deploying Firefox ESR for themselves and students.
*The IT department may ask in the Enterprise Working Group Mailing List:
** https://mail.mozilla.org/listinfo/enterprise
* more info at http://www.mozilla.org/en-US/firefox/organizations/

File Content Conversion for Sender Channel

Hi Experts,
      We are using SAP - PI 7.11 system. We have a scenario where we wld be getting 7-8 records and the record structure repeats n no.of times in a flat-file and while converting the Flat -File data into XML data we are facing an issue , explained below with an example :
HEADER : KeyField , f2, f3, f4, f5, f6, f7, f8
RECORD1 : f1, f2, KeyField , f3, f4, f5, f6, f7 , f8
RECORD2 : f1, f2, f3, f4, KeyField, f5, f6, f7, f8
TRAILER : keyField, f1, f2, f3, f4,f5, f6, f7, f8.
Its a fixed length flat - flie. Now the problem is : we have KeyField Value for RECORD1 as '0' and when the f3 of TRAILER is '0' the record is getting formed as RECORD1 instead TRAILER even i get proper keyField value for TRAILER RECORD. Could you please tell me why its happenning so ? And please provide the solution for this. I have used all the parameters like : fieldNames, fieldfixedLengths, keyFieldValue, endSeparator and ignoreRecordsetname and lastFieldOptional and fromConfiguration.
But still i am not able to get the proper XML out of this flat - file. Could you please suggest any solution for this asap.
Thanks & Best Regards,
Lakshman

Most of the configuration seems fine,
Just validate your configuration against below configuration, which is working fine for me,
Recordset Structure : HEADER, 1, RECORD1, ,RECORD2,,TRAILER,1
Recordset Sequence : Ascending
Recordsets per message : *
Key Field Name : recid
Key Field type : string
HEADER.fieldFixedLengths     *********************
HEADER.endSeparator     'nl'
HEADER.fieldNames     ************************
HEADER.keyFieldValue     01
HEADER.keyFieldlnStructure     add
HEADER.lastFieldsOptional     YES
-santosh.

Mail and attachment (Sender Channel)

Hi,
I receive e-mails with attachments. These are processed correctly because I addad the PayloadSwapBean into the module chain of the communication channel.
Sometimes (when I send an e-mail with attachment from my own e-mail account) the attachment is not processed.
Is there a specific way to send the attachments?
Best regards
ROn

Hi,
What I meant was that i send email from my account [email protected] to [email protected]
The mail adapter is polling with POP on [email protected]
When I look in the messaging system I find the message
2006-07-14 10:46:51 Success Swap: swapping by Content-Description ? MailAttachment-1
2006-07-14 10:46:51 Success Swap: no matching payload found
But the emails that are processed correctly also have this message....
We are on SP14
Ron
Message was edited by: Ron van der Sterren

Question on IDoc to File scenario

Hi Guys
I am doing an IDoc to File Scenario, and my sender system is maintained in the SLD as a business system, an I have created my RFC destination and Port acording this blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1310. [original link is broken] [original link is broken] [original link is broken] but when I use transaction idx2 the is niothing on a LOADED METADAT.
I have imported the idoc to integration repository : "FLCUSTOMER_CREATEFROMDATA.FLCUSTOMER_CREATEFROMDATA01"
My file will be created on the FTP Server directory.
My question is, do I have to created the RFC connection of type 3 or type T.
Thanks
Yonela

Hi Yonela,
Go thru the following threads and troubleshoot..
IDoc was saved but cannot or should not be sent
"IDOC saved but cannot be sent"
Regds,
Pinangshuk.

Hi experts...file to file....one sender n no of recievers....

hi,
this is file to file scenario...sender side i have my file like...empno empfirst name emp last nem persno....here im sending one mesg...and it has split into n recivers depending on persno...any one can help me in this issue ...without using bpm....
Thanks in advance and for ans u'll be rewarded....
Edited by: hari prasad on Apr 2, 2008 8:51 AM

hi
you are creating the file to file scenarios
create the IR
and then create the ID
you are creating the one sender and n number of receiver for that you just give the condtion in interface determination
that is some condition satisfy then data goes to the perticular receiver
and just check it
I hope your prob will solved
thanks
Regards
vijay

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

How to read a file name and send it a particular reciever

Hi,
I have a scenario, where i am receiving a a file and based on the file name i have to decide who is the receiver and send it to that particular receiver.I do not have to do any mapping.
can someone suggest me how can I achieve this.
Thanks in advance.

HI This may help you.Let me know if not.
Step by Step Guide: XML File 2 XML File Scenario: Part I
Step by Step Guide: XML File 2 XML File Scenario: Part II
Converting XML to PDF using XI
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
"JAVA MAPPING", an alternate way of reading a CSV file
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Push Data to MVC Architectured application using XI
How to send any data (even binary) through XI, without using the Integration Repository
XI in the role of a FTP
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.

2 file to file scenarios and one sender channel

Similar Messages

Maybe you are looking for