HI friends i am facing issue regarding the hosting of an application on the firewall .

Dear friends i configure public ip on firewall interface ,and i have one more public ip for hosting of the sqp application publicly,so please how can i do this can any one let me know configuration is below.
THE BELOW ARE THE IP ADD FOR THE SERVER HOSTING ,AND CONFIGURATION OF THE FIREWALL AND ROUTER FOLLLOW BELOW.
PC IP : 72.93.232.66
Subnet Mask: 255.255.255.252
Gate Way ( Router IP ) : 72.93.232.65
Domain Name : www.hrmstadrees.com
Server Local IP for Application: http://10.10.10.4/MenaITech/Mename/
ASA-CONFIG
ASA Version 8.2(5)
domain-name RAQ.com
enable password lpW.MGeEHg0ISQZq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
description Connected to TAD-Router G0/1
nameif outside
security-level 0
ip address 72.93.19.174 255.255.255.252
interface Ethernet0/1
description Connected to Cisco SMB Switch G1
nameif inside
security-level 100
ip address 10.15.1.1 255.255.255.248
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
no ip address
management-only
banner login ******** RAQ FIREWALL ********
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 8.8.8.8
name-server 84.22.224.11
name-server 84.22.224.12
domain-name tadrees.com
access-list split-tunnel standard permit 10.10.0.0 255.255.0.0
access-list nonat extended permit ip 10.1.1.0 255.255.255.0 10.10.0.0 255.255.0.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 10.1.1.0 255.255.255.0
access-list Mename-Access extended permit tcp any host 72.93.19.174 eq www
pager lines 24
logging enable
logging buffered debugging
logging asdm debugging
mtu outside 1500
mtu inside 1500
mtu management 1500
ip local pool sslvpnpool 10.1.1.1-10.1.1.254 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-702.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www 10.10.10.4 www netmask 255.255.255.255
access-group Mename-Access in interface outside
router rip
network 10.0.0.0
version 2
route outside 0.0.0.0 0.0.0.0 72.93.19.173 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TAD-AD protocol nt
aaa-server TAD-AD (inside) host 10.10.10.1
aaa authentication ssh console LOCAL
http server enable 444
http 192.168.1.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 2
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 20
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
no anyconnect-essentials
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc enable
tunnel-group-list enable
internal-password enable
group-policy sslvpn internal
group-policy sslvpn attributes
wins-server none
dns-server none
vpn-tunnel-protocol svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value tadrees.com
group-policy DfltGrpPolicy attributes
webvpn
svc ask enable default webvpn timeout 30
username admin password s8Vngsgpp8NmOJP7 encrypted privilege 15
username cisco password HWFflA1bzYiq7Uut encrypted privilege 15
tunnel-group TAD-SSLV type remote-access
tunnel-group TAD-SSLV general-attributes
address-pool sslvpnpool
authentication-server-group TAD-AD LOCAL
default-group-policy sslvpn
tunnel-group TAD-SSLV webvpn-attributes
group-alias ssl enable
group-url https://72.93.19.174/ssl enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c23556bcb54d60cbd598593f6429d106
: end
ROUTER CONFIGURATION
RAQ-Router#sho run
Building configuration...
Current configuration : 5623 bytes
! Last configuration change at 13:59:42 UTC Sat Sep 21 2013 by cisco
! NVRAM config last updated at 13:44:13 UTC Sat Sep 21 2013 by cisco
! NVRAM config last updated at 13:44:13 UTC Sat Sep 21 2013 by cisco
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname TAD-Router
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY
no aaa new-model
no ipv6 cef
ip source-route
no ip cef
ip domain name yourdomain.com
ip name-server 8.8.8.8
multilink bundle-name authenticated
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1513054491
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1513054491
revocation-check none
rsakeypair TP-self-signed-1513054491
crypto pki certificate chain TP-self-signed-1513054491
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31353133 30353434 3931301E 170D3132 30393236 31363239
33385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 35313330
35343439 3130819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100AADE 6F39CF31 6832A80B DBCC6E4D 82AA4F8A B71E7118 50B53E0E FD94E7E9
A6557FD6 30A099C0 D44E36BA 92CBE1EB 1C2789B6 A1260D38 B24637A5 255F18D7
0B6F2B70 44CF0583 DADB7687 E4102B24 4FA18CDA 36A7CA2A 96F78C1C B92214D8
087DC6D5 240F7449 DBC4AD01 17FBDC0A 9ECC24DF C7D57E33 9C9CF327 27F2A905
78470203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14D06F56 4B82A937 E11730CB BDEECF51 BDAE337F 98301D06
03551D0E 04160414 D06F564B 82A937E1 1730CBBD EECF51BD AE337F98 300D0609
2A864886 F70D0101 05050003 8181005A 297C5954 817B8D56 1443D1D5 B21DBA42
F7EC486D B82CBA55 C2953C0E 756FAC1F B04C48C3 D208E4AF DE412F1C C4A97B38
856AC4F2 A664C6CB 3E241FB6 4AD2DC4B BE5B4809 DE6269CC 0826E822 33F853B3
3FE1E0E9 AA125902 C632B6E6 BE2EC625 0F7F2259 F408844B 9813429F 422EDBE0
ADE0EA0D A2138291 D806C4F1 72C4A9
        quit
license udi pid CISCO2911/K9 sn FCZ1633771T
username bciscoadmin password 0 tadreesadmin
username cisco privilege 15 password 0 c1sc0
ip ssh version 1
track 1 interface Dialer0 ip routing
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Connected to Internet Temp
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 72.93.19.173 255.255.255.252
ip tcp adjust-mss 1452
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
pvc 0/99
pppoe-client dial-pool-number 1
interface Dialer0
no ip address
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip flow ingress
ip nat outside
ip nat enable
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 0 123456
ppp pap sent-username [email protected] password 0 123456
no cdp enable
ip forward-protocol nd
no ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip route 0.0.0.0 0.0.0.0 Dialer1
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
control-plane
banner login ^CC
**    TADREES PRIVATE NETWORK ..... AUTHORIZED USERS ONLY    **
***************************************************************^C
banner motd ^CC
                                                  ==================
                                                       WARNING
                                                  ==================
If you are an unauthorized user LOG OFF NOW, all unauthorized access will be prosecuted to the full extent of the law
This is a Private Network Device. This resource including all related equipment, networks and network devices, are provided for authorized Private use. Private systems are monitored for all lawful purposes, including ensuring authorized use, for manageme
The monitoring on this system may include audits by authorized personnel to test or verify the validity, security and survivability of this system. During monitoring information may be examined, recorded, copied and used for authorized purposes. All
Use of this system, constitutes consent to this policy and the policies and procedures set forth by the company
Evidence of unauthorized use collected during monitoring will be used for criminal prosecution by staff, legal counsel and law enforcement agencies.^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login local
transport input telnet ssh
line vty 5 15
login local
transport input telnet ssh
scheduler allocate 20000 1000
end

Let me get this correctly, you want to access the server over the public IP?

Similar Messages

Known Issue while running Adobe Story desktop application for the first time on Mac OS 10.8

You may encounter the following error message while running the Adobe Story desktop application for the first time on Mac OS 10.8:
For resolution, please go to:
http://helpx.adobe.com/story/kb/run-story-app-mac-os.html

The /Developer directory contains the compiler(s) and various tools and libraries.
Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

Issues with IFrame and calling an application outside the IFrame

Hi
I have an issue which is really turning my head 360 degrees in a "dead loop":)
I have a WebDynpro application, one component and three views in a viewset.
The first view will always be placed in column one and depending on some action the two other views should be loaded one by one. So in the main view the users will select three parameters from three dropdownboxes and then a call with the given parameters to an html file in KM - which then again is passing the parameters to a swf file which is presenting an Business Objects dashboard. The BO Dashboard is presented in an iFrame.
The users selects an element in the Dashboard and is then again calling the webdynpro application with four parameters, the three first from the dropdownboxes, but also a new one which is used to call the third view. I am using NavigationTarget in the URL to load the application at the given position in the portal. And the logic is working, BUT the portal is presented in the IFram of the first View.
So my question is - How to navigate from the IFrame and "back into the portal"????
Regards
Kay-Arne

There was an issue with the serialization file created.
Creating a new serilaization file via AAMEE and running it resolved the issue.
Create a serialization file via AAMEE: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
And then run it via command line.
Here are the steps:
AdobeSerialization (serialization file created using AAMEE 3.1) is not a double clickable file. You need to run it via command line to serialize the products. the command line is -
AdobeSerialization --tool=VolumeSerialize --stream --provfile=”Absolute_Path_of_prov.xml”
where
--tool=VolumeSerialize: specifies that the tool needs to process the prov.xml file to serialize.
--provfile” specifies the absolute file path to the prov.xml file,
By default, the tool looks for the prov.xml file in the same directory as the executable file and so
typically you do not need to specify this option. (Specify this option only if the prov.xml file is in some
other location.)
Make sure you invoke command prompt with Admin privileges. Return code of zero means success.
Tiffany can you please confirm the same?
-Pragya

Issue with switching spaces via clicking application in the dock

Hey guys,
Sometimes, not all the time, when I click on an application in the dock that has windows open in another space, it switches to the appropriate space, but with the application I clicked on not in the foreground. If I have other application windows open in that space, sometimes they occupy the foreground, and subsequently, the application I have clicked on on the dock is not in view. It is highly annoying when I click on the dock icon, to find that I have to go down and click on the dock icon a second time to bring the app into view. Does this happen to anyone else?
Cheers guys,
Ric.

Thanks KXsig.
I've been upgrading from 10.5.8 to 10.6.4 last sunday. Since then, switching between different Spaces with Magic Mouse, i've got that issue of a third party application dedicated to Spaces number 6, and appearing also in background of Spaces 4 dedicated to Safari, or also in any free Spaces spot, when the application dedicated is not opened.
That didn't happened with Leopard, thanks a lot for the keyboard shortcut "Command + Tab".
Maybe a fix in 10.6.5 to come..

Facing issue while deploying in oracle 10G application server

java.lang.NoClassDefFoundError
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parseBinding(RuntimeWSDLParser.java:460)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parseWSDL(RuntimeWSDLParser.java:357)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:172)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:135)
     at com.sun.xml.ws.client.WSServiceDelegate.parseWSDL(WSServiceDelegate.java:275)
     at com.sun.xml.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:238)
     at com.sun.xml.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:186)
     at com.sun.xml.ws.spi.ProviderImpl.createServiceDelegate(ProviderImpl.java:111)
     at javax.xml.ws.Service.<init>(Service.java:56)

Hi Ahmed,
It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
Best regards,
Erik

How to use user id of the logged user (in Application) in the Valueset

Hi All,
I want to Create a Table Value Set.
i want to Filter the values in value set based on the User id by which user has logged in Application.
How to get user id and how it can be used in Table Value set Query.
Please guide me...
Waiting 4 ur response.
Thanks
Sheetal

Hi Sheetal,
You can call the function fnd_global.user_id to get the current user identifier of the logged in user.
Regards,
J.
SELECT fnd_global.user_id
FROM dual

Problem in taking the control of my application in the test class

Hi,
I am calling an application(Login) from the test class. This test class tests for blank fields entered for the login application.
Once i get the login screen, my program is getting hanged, i mean its not executing the test case unless i press the cancel button in that login screen. Only when i press the cancel button,my test case is executing in the background & is successful.
Can anyone tell me why is this happening & is there a better way to handle this situation.
Thanks & Regards,
Vishal

Well here is the Test class that i have written,
* LoginScreenTest1
* Created on Mar 9, 2007 by vishal
package unittest.com.erp;
import junit.extensions.TestSetup;
import junit.extensions.jfcunit.*;
import junit.extensions.jfcunit.finder.*;
import junit.extensions.jfcunit.eventdata.*;
import junit.framework.Test;
import junit.framework.TestSuite;
import junit.textui.TestRunner;
import com.erp.client.swing.ClientLoginDialog;
import com.erp.client.swing.workspace.ClientWorkspaceFrame;
import com.erp.client.swing.workspace.data.LoginResults;
import javax.swing.*;
import junit.extensions.jfcunit.finder.Finder;
import java.awt.Window;
import java.awt.Robot;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.InputEvent;
import java.util.List;
import java.util.ArrayList;
* MISSING_JAVADOC Vishal Class LoginScreenTest1 description.
* @author Vishal
public class LoginScreenTest1
    extends JFCTestCase {
private ClientLoginDialog loginScreen ;
private static JFCTestHelper s_helper = null;
private LoginResults lr;
public LoginScreenTest1(String name) {
    super(name);
    s_helper = new JFCTestHelper();
    System.out.println("Calling Login dialog");
    loginScreen = ClientLoginDialog.login(new JFrame(),true); // Returns the login dialog
    loginScreen.setVisible(true); // Its getting hanged here,only when i press the cancel button my test case gets executed
public static Test suite() {
    System.out.println("I am in Suite");
    TestSuite suite = new TestSuite(LoginScreenTest1.class);
    return suite;
public void testUserAndPasswordEmpty() {
    JDialog dialog;
    System.out.println("In Test case ");
    JTextField userNameField = (JTextField)s_helper.findNamedComponent("LoginTextField",loginScreen, 0);
    JTextField passwordField = (JTextField)s_helper.findNamedComponent("PasswordField",loginScreen, 0);
    JButton CancelButton = (JButton)s_helper.findNamedComponent("Cancelbutton",loginScreen, 0);
    userNameField.setText("");
    passwordField.setText("");
    JButton LoginButton = (JButton)s_helper.findNamedComponent("Loginbutton",loginScreen, 0);
    System.out.println("Clicking Login button");
    LoginButton.doClick();
    System.out.println("Login button clicked");
public static final void main(String[] args)
    junit.textui.TestRunner.run(suite());
     try
        Thread.sleep(1000000);
     catch (Exception e)
}Message was edited by:
vishal_vj

Opening a file in the host from a link in the HTML widget

Hi,
I'm trying to create an inDesign panel that opens an inDesign file (.indd or .idml) when I click on a link in an HTML list of files that appears in the HTML widget.
Can anyone tell me how I can achieve this either width html or javascript/extendscript ?
What's the best practice?
Thank you very much for the help.

Hi,
In the FM'S u might have declared the import,export,tables parameters.So u have to use these parameters in the source code editor of FM.If u don't use any of these parameters and try to use any other parameters which also not declared in the FM source code,then u will get the error.pz check the parameters u r using in the FM....
Regards,
Nagaraj

OS X on the SSD, yes - but Applications on the same SSD or HDD?

Hi,
I'v just ordered one of the new iMacs custom built with both a HDD and a SSD - for maximum speed in Photoshop and video editing.
However, I'm not sure whether I should install OS X & all Applications on the very same SSD - and then all documents on the HDD?
Or - should I install OS X solo on the SSD - and then all Applications and documents on the HDD?
I'm not an expert, so I'm not quite sure how the digital logic works here....
Thank you kindly!
Regards
Dr. Wishbone

SSD drives have a limited number of writes. I say store the OS and applications on the SSD for speed.
I think the easiest way to accomplish this is to install everything onto the SSD first. Then, adjust your /etc/fstab file to have /Users be on the hard disk. Do the same for /private/tmp and /private/var.

Since upgrade to Windows 8, cannot save .rdp files under the Remote Desktop Connection application on the Desktop

Since I upgraded to Windows 8, I am no longer able to save individual Remote Desktop Connection files as .rdp files. I am talking about the traditional Remote Desktop Connection application on the Desktop that was in previous Windows versions, not the
Remote Desktop App from the Windows 8 store.
When I try to click on the Save button I get "An error occurred while saving to file"
When I try to click on the Save As button I get "Unable to open connection file" with the file address being where I tried to save it with the file name at the end.
Also when I upgraded to Windows 8, my .rdp files disappeared from my Documents folder.
I need to create different .rdp files for different programs that my employees get into on my server. Now I have to hand type all the info each time into the Programs tap on the Remote Desktop Connection window, because I can't save to an
.rdp file.
I like the Remote Desktop App from the Windows store but it won't let me designate specific programs to use using standard dos notation (ie c:\program files\ etc..). It just goes to my server desktop.
I want to promote Windows 8 to my employees but I need either .rdp files for the traditional Remote Desktop Connection or the ability to open specific programs using dos notation in the Windows Store Remote Desktop App.

I know this is an old post but others might still be having the problem. Here's what I did.
Create a new text file and open it in notepad. Copy the below into it and edit for your environment. (IP, screen size).
screen mode id:i:2
desktopwidth:i:1920
desktopheight:i:1080
session bpp:i:24
auto connect:i:0
full address:s:192.168.x.x
compression:i:0
keyboardhook:i:2
audiomode:i:2
redirectdrives:i:1
redirectprinters:i:1
redirectcomports:i:1
redirectsmartcards:i:1
displayconnectionbar:i:1
username:s:USERNAME
domain:s:DOMAIN
alternate shell:s:
shell working directory:s:
disable wallpaper:i:1
disable full window drag:i:1
disable menu anims:i:1
disable themes:i:1
bitmapcachepersistenable:i:1
use multimon:i:0
winposstr:s:0,3,0,0,800,600
audiocapturemode:i:1
videoplaybackmode:i:1
connection type:i:7
networkautodetect:i:1
bandwidthautodetect:i:1
enableworkspacereconnect:i:0
allow font smoothing:i:0
allow desktop com:0
disable cursor setting:i:0
redirectclipboard:i:1
redirectposdevices:i:0
drivestoredirect:s:*
autoreconnection enabled:i:1
authentication level:i:2
prompt for credentials:i:0
negotiate security layer:i:1
remoteapplicationmode:i:0
gatewayhostname:s:
gatewayusagemethod:i:4
gatewaycredentialssource:i:4
gatewayprofileusagemethod:i:0
promptcredentialonce:i:0
gatewaybrokeringtype:i:0
use redirection server name:i:0
rdgiskdcproxy:i:0
kdcproxyname:s:
You don't need to worry too much about what's in here. Save the text file as
filename.rdp then rightclick on the file and select edit. The familiar GUI rdp session editor will open. You can make changes in the GUI and
save or save as a different session.
Hope this helps.

How to contact the author of an application on the iPhone AppStore?

Is there a link on the iPhone AppStore to send questions or suggestions to the developer of an application?
(If not, why isn't there one? )

Thank you Varjak!
So it's as I supposed...
Unfortunately I don't have iTunes installed on this PC, so that's why I searched on the iTunes webpage...
And indeed I don't understand why they don't provide the same link on the iTunes webpage. (maybe to "encourage" you to open the iTunes application, or maybe in order not to provide links between the iTunes page and the developer page, links which would be processed by the search engine bots and the page ranking algorithms...)

Java command to get the host ad ip details of the weblogic instance running

Hi Guys I have a weblogic instance running in my machine and I have deployed my ear file containg some java class files.Is it possible for me to get the host name and the port to which the weblogic instance is running.
Thanks in advance

shet wrote:
Hi Guys I have a weblogic instance running in my machine and I have deployed my ear file containg some java class files.Is it possible for me to get the host name and the port to which the weblogic instance is running.the application should neither know nor care what server or port it's deployed to.
%

Authorize the computer to transfer applications to the iPhone by iTunes

Please help me to authorize the computer where that after doing software for the computer did not do cancel the authorization and I now have only two computers authorized one MacBook Pro and the other Dell desktop and when I do authorize any other device message appears to achieving the maximum devices authorized, although I did not authorized only two devices only I hope help me .
Thank you
Note: Excuse me I'm not good in English, this translation Google

Delete and redownload the remaining songs if doing so is free in your country.
(90752)

Does the two installations rule follow the suite or individual applications within the suite?

I would like my web tools on my mac and windows laptops but I want my video/audio editing tools on my desktop tower. So no individual apps would be installed more than twice. Premiere, After-effects and Audtion would all be installed only once but on a 3rd machine - is that possible or would that require deactiving the entire Suite on one of the laptops? - thanks

It's not possible. The activation is per suite, not per product.
Mylenium

HI friends i am facing issue regarding the hosting of an application on the firewall .

Similar Messages

Maybe you are looking for