Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone

Similar Messages

  • HT1414 phone started vibrating and wouldn't stop...now phone won't turn on

    phone started vibrating and wouldn't stop...now phone won't turn on

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT1688 My husband's iphone can't connect to the App store after he updated to ios.7.  He updated it yesterday and he has had problems since.  He gets a message that the iphone can't connect to the app store and he has internet connection.  Please help.

    My husband's iphone can't connect to the app store after updated his phone to ios.7. and has internet connection.

    Any update will cause problems for a few users. And those users will rush here and post "the sky is falling" stories about their experience. The 99.99% of people who have no problems after an update won't bother to post here; indeed, most of them don't even know ASC exists. FWIW, I had no problems with iOS 7 on my 4S. Your problem is most likely not related to iOS 6, but you should probably update anyway. For addressing the battery issue see this outstanding article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • I have a new iPhone 5S.  While trying to learn about it, I accidentally recorded a voice memo with no content.  I cannot now figure out how to get rid of it.  There is a banner across the top of my phone with this memo which I don't want.  Help!

    I have a new iPhone 5S.  While trying to learn about it, I accidentally recorded a voice memo with no content.  I cannot now figure out how to get rid of it.  There is a banner across the top of my phone with this memo which I don't want.  I have deleted it from iTunes but cannot get it off the phone.  Help!

    The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

  • HT6010 I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

    I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

    Try this support document http://support.apple.com/kb/TS3694 and look at this section.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors: 
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    please try this.
    airplane mode on + wifi
    You will get very good Internet connection.
    This is bug of iOS 8. I already reported this to Apple to solve this problem ASAP.

  • I am connected to my usual wifi and when I try to go onto any apps which require internet connection, it says I have no internet connection yet I am connected to wifi, how do I resolve this?

    I am connected to my usual wifi and when I try to go onto any app's which require Internet connection, it says I have no Internet connection yet I am connected to wifi, how do I resolve this?I have had this problem for about a week.
    Any responses are appriciated

    You posted in the iPad forum, but you profile lists an iPhone 4S. Does your iPhone or iPad have this problem.
    Here's some iPad suggestions. Most also apply to the iPhone. Your iPhone or iPad may show the wifi symbol but that only shows the presence of a wifi signal. Not that you are connected.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Since updating the new software on my iphone5 I cannot sign in to FaceTime. It advises me to check my internet connection which is working ok. Please can someone advise me.

    Since updating the new software on my iphone5 I cannot sign in to FaceTime. It advises me to check my internet connection which is working ok. Please can someone advise me.

    Hey jeanettefromiw,
    Thanks for the question. I understand that you are experiencing issues signing into FaceTime on your iPhone 5. The following resources should assist you in troubleshooting these issues:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    If you see "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
    Update to the latest version of iOS.
    Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
    If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
    Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
    If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
    Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
    Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
    Thanks,
    Matt M.

  • TS1363 I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone h

    I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone help me?

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • Registry name and value to check if server has internet connection

    Hi
    I want to check that if server has internet connection though registry value. Can any one help me the path of registry to check if server has an internet connection or not

    > Martin Can I get the script to check the server has an internet
    > connection ?
    Sorry, I don't have one - we never had the need to check this... Short
    VBS snippet:
    strURL = "https://www.grumpfasdklfhsdf.comm"
    Set objExplorer = WScript.CreateObject("InternetExplorer.Application",
    "IEWindow_")
    objExplorer.Navigate strURL
    Do While objExplorer.ReadyState <> 4
        WScript.Sleep 100
    Loop
    Sub IEWindow_NavigateError( pDisp, sURL, sFrame, sStatus, sCancel )
        WScript.Echo sStatus
    End Sub
     sStatus in the Sub will contain HTTP error codes. 502 for "Host not found".
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • "Linux has internet connectivity built in"

    Can any one please tell me what does it mean "Linux has internet connectivity built in".
    Information that I have is
    Linux has built in internet connectivity : Internet connectivity is part of Linux's Unix heritage. Every major distribution of Linux comes with tools that can immediately get you up and running on the internet. Most even include Netscape Navigator as their browser of choice.
    How I can make use of this in my e-business application? Help would be appriciated.
    Thanks in advance.

    Well, the sentence you quoted sounds a lot like some basic marketing babble.
    All this says is: Linux can be used to access the Internet in some way, straight from the box. So what they're saying is that you can browse the web and probably send some e-mail as well.
    The point is that just about any UNIX can do this out of the box.
    The nice thing about Linux is the fact that a number of its distributions come packaged with other nice tools, like web servers, DNS server software, mail server software, IRC server software, database server software... Stuff like that. But the same thing goes for these: a lot of UNIX flavors (chocolat's my favourite!) come with stuff like this!
    Solaris comes with BIND for DNS, Apache for Web serving and Sendmail for mail serving.
    Maybe you could tell us a little bit more about your situation and what you're trying to do. That way we can give you some more interesting info!
    Cheers!
    Thomas
    P.S.
    I have to wonder though which article you got your quote from! Because I'm curious which Linux distro would be proud to call Netscape Navigator it's "browser of choice" these days!

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's.  My computer has internet connection thru router and my ATV has internet connection thru same router.  My iPad can see the ATV but it can't see iT

    My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired.  My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue.  My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related.  I turned the PC's firewall off but no joy.  I uninstalled the expired McAfee and still no joy.  Reboot = no joy.  Glass of scotch = no joy.  Need help!!

    Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs.  And I've successfully streamed music/photos to my ATVs for over a year.

  • Can i transfer iTunes library from my pc to old iBook which has firewire connection?

    can i transfer iTunes library from my pc to old iBook which has firewire connectivity? thanks

    Yes.  See here: iTunes: How to move your music to a new computer
    B-rock

  • WRT54GS-Ver. 6 - Never shows that it has internet connection

    Hi,
    I have been trying to resolve a problem and I can't no matter what I do.
    I have Model # WRT54GS - Ver. 6, I have had it over a year and the problem started a year ago when I bought it so my daughter could connect her computer wirelessly with mine.  It was working just fine and then it started disconnecting one computer when the other was on, the two of them could never be on at the same time, anyway my daughter moved out and I put the router away not worried anymore about the problem.  5 days ago I bought a Dell Inspirion Laptop with Vista and reconnected the router to my main computer (Dell Dimension 3000 with Windows XP)
    Here is the problem -  I can only get connectivity to one computer at a time or neither of them will connect, when I check out the advisor it ALWAYS shows up as if there is no connction to the internet even if I can get on with one of the computers.  I have a Touchstone telephony ARRIS modem with Cox Internet (always been the same) I have tried to download the updates for the router but I can never open it as it saves as  a VLC media file(.bin)  and if I try to "unzip" it , it says "cannot open file as archive"  always.
    I have reset, rebooted, un plugged all connections and I don't know what else to do. I have had about 4 diffferent encryption keys already when I have to disconnect. I have also tried removing it from my computer and re-installing .
    Can any one help PLEASE
    Thanks in advance.

    Ok, now I think I have a bigger problem,
    I did as posted from "HELM" and downloaded firmware and everything downloaded fine thanks to the instructions given, but after rebooting and unplugging, waiting 30 sec. and replugging the power, now easylink advisor tells me that it cannot find the router...I tried disconnecting the power to the modem and router as it indicates and then waitng the proper amount of time for each one and  reconnecting, but to no avail.
    So I diconnected the router completely and connected directly to the modem to be able to write back and ask what can I do now that the router is now longer recognized?
    Should I just trash it and buy another one because there is no hope for this one.
    Thanks in advance.

Maybe you are looking for

  • Ball bouncing

    hi, friends, i am new java learner. i have a trouble to make my ball bouncing in the applet. my ball only stay on one place and my formula doesn't work at all.PLEASE HELP URGENTLY!!! thank you very much. Balls.java// import java.awt.*; import java.aw

  • Error in writing to PSA

    HI Experts, Currently i am working in SAP 3.5 version, when i am running the infopackage i am getting the error "Error in writing to PSA, RSM2 851" and "Error 5 When adding to PSA, RSAR 130" when i deleted the same request and re-executed the same st

  • Connecting SAP BW to SAP R/3 : Creating source system manually/automaticall

    Hello All, I have created the RFC connection between R/3 and BW system .The message types also have been defined and partner profiles have been generated. When I am trying to create SAP source system in RSA1 --> Source system it asks me for the SAP T

  • Flash preview failing on PDF file

    I have what appears to be a perfectly valid PDF file for which Share seems unable generate a Flash preview. The PDF file was created with a fairly old version of Acrobat (PDFWriter 2.0 for Macintosh), but displays without error with Acrobat 8 on Wind

  • Calling java script from a button

    Hi, I have a Form and I would like to let the end-user to confirm some action that was initiated by pressing a button. The best way would be to call Java script, but the button is an 'item' button and not a 'region' button - i..e it is placed between