Hi updated ipad to ios7 now I don't have any sound, done all the usual checked the little switch above the volume button, turned it off then on, reset the ipad but still no volume.

No sound

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

Similar Messages

  • I don't have any sound coming from my computer. I checked all the speakers but i still don't have any sound. help!

    I don't have any sound coming from my computer. I checked all the speakers but i still don't have any sound. help!

    Do you have sound coming from the audio output port using headphones?  If so, when the plug is pulled out, is there a red light?
    You may need a PRAM reset:
    http://support.apple.com/kb/HT1379
    Ciao.

  • I don't have any sound coming from my speakers after updating my HP Envy H8-1513C?????

    Since I updated my HP Envy H8-1513C i don't have any sounds coming from my monitors. I also can't seem to get any sync cords for my iphone 4 to work with my computer. These always worked before the update???

    I recommend going through the troubleshooting section in this document to see if any of that can resolve your issue.
    Have you tried a hard reset yet?
    I work on behalf of HP (But this isn't my job)
    Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
    Please give me Kudos if I wrote something that helped you.

  • I don't have any sound on my iPad.

    I don't have any sound on my iPad.

    See the reply that was left on your first post.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????

    My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I don't have any sound in my computer

    !Hi all!
    I don't have any sound in my computer!
    and alsamixer:
    /usr/bin/pulseaudio: error while loading shared libraries: libltdl.so.7: cannot open shared object file: No such file or directory
    ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
    cannot open mixer: Connection refused
    i have sound in microsoft windows.
    thanks!

    I'm sorry.
    If you were looking for help, I assume you would have told us about your sound card, how your system is configured, whether you are using a desktop/window manager, which one, the articles in the wiki you have researched, and what you have tried.
    Edit: I'm apparently in a bad mood.  I'm going to go outside and do some yard work. It is a beautiful 75 degree F day here in So Cal
    Last edited by ewaller (2012-01-29 19:23:29)

  • My macbook pro 13" don't have any sound

    my macbook pro 13" don't have any sound
    the sound is put to maximum position

    Check the function keys again.  If there is no change, try a PRAM reset:
    http://support.apple.com/kb/ht1379
    Ciao.

  • I just got the iPhone 5s about a month ago, i decided to turn it off because some of the apps weren't working right, and now it will not turn back on. It says i need to plug it in to iTunes, but my iTunes will not recognize my phone. What do i do?

    I just got the iPhone 5s the Friday it came out. So today i decided to turn it off because some of the apps are not working. Now that i turned it off, it will not let me turn my phone back on until i plug it into iTunes. But i have and now its saying that until my iPhone is restored i can not plug it into iTunes. I already have . alot of stuff such as picture and contacts that i do not want to lose. What is going on and what can i do? This is honestly the most frusterating thing about IPHONEs. PLEASE HELP, I CAN'T HANDLE MUCH MORE. This should not be happening. I did NOT pay 300$ for this to happen in a less than a month of coming out.

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • I have no sound at all on my Mac Pro. I was watching movies online and also listening to itunes n the weekend, now no sound at all??

    e in the weekend, at times with my earphones on. Now for some reason I have no sound at all not just while watching movies but also in itunes.

    Best post this in the MacPro forum.
    Have fun.
    x

  • I don't have any sound from HCD HDX589W while watching tv. I have sound when listening to music

    I dont have any sound from my system, HCD HDX589W while watching tv. I put a CD in and it works fine. The sound from the tv was working fine yesterday but when I turned on the system today, it did not work.

    Hi law4003,
    Please make sure all the jacks are properly inserted in all ports. Check also the SPEAKER SETTINGS in Audio Settings of your TV. Make sure EXTERNAL or AUDIO system is selected.
    You may also check the links below for further assistance.
    https://us.en.kb.sony.com/app/answers/detail/a_id/40842/p/46871,74233,75026/c/65,66/kw/no%20sound
    https://us.en.kb.sony.com/app/answers/detail/a_id/42785/p/46871,74233,75026/c/65,66/kw/no%20sound
    https://us.en.kb.sony.com/app/answers/detail/a_id/39263/p/46871,74233,75026/c/65,66/kw/no%20sound
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • My iPad is muted and I don't have any "sound effect" volume and my iPad is completely muted. Why?

    Not sure what to do.. I tried going to the general settings tab and changed my lock setting to mute so I can control the volume from the side switch and still there are no volume bars appear when I try to change the volume. What am I missing? And what does "sound effect" mean?

    Let's go back to basic.
    1. Settings>General>Use Side-Switch To>Lock Rotation
    2. Double-click the Home button and swipe Task Bar to the right.
    3. Make sure the button on the far left of Task Bar is not muted

  • I don't have any sound on my iPad games. How do I fix this?, I don't have any sound on my iPad games. How do I fix this?

    I don't get sound on my iPad 2 games purchased from the App Store like mine raft, mega run, and order up!  My speakers work because there is sound when using YouTube, music, Netflix, and videos.  How can I get the sound for my games back?

    You have system sounds muted.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • After updating to 6.1.3. I don't have any 'sound' anymore?!

    Hi,
    I updated my iphone 5 as well as ipad with 8pin connector to i.o.s. 6.1.3 and then all 'notifcation sounds' dissapear....can someone help?
    Thx

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • TS3274 Don't have any sound on some of my games

    I use to have sound on all of my games and today I went to play them and there is no sound at all. There are some of my games I still have sound thou. My smurffs, where's my water and some of my other games I first got don't have sound but my bingo , music pratice ones have sound. What is the problem am I going to have to uninstall them and reinstall them?

    This usually would mean that you have system sounds muted if none of your games have sound.
    Do these apps that don't have sound have their own volume controls? Most games do have it in the settings as an option.
    Just in case .....
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for

  • W-7 XP Mode and 32 bits LPT1 printers

    This XP virtual mode is from a W-7 Ultimate 64bits and works well with a couple of 32bits devices, one of them a photo or slides scanner for digital conversion, and others 32bits programs. My system is a Lenovo Laptop TP61p with a mini dock where I h

  • How do I get MacBook Pro to use Alpha Network wifi usb adapter?

    Using OS X.  Alpha Network usb wifi adapter using Ralink wireless utility.  Network utility says it is connected as 802.11 n WLAN.  But my browsers (Safari and Firefox) do not use the adapter to connect to the internet.  How do I turn off the interna

  • Print Mail Message attachments as an icon

    Under Mountain Lion, I was able to permanently tweak Mail, so that all Attachments I received showed as icons, and when I printed the message, the attachment showed as an icon. Under Mavericks, I can right click an attachment, so that it shows on scr

  • Difference - PB00 and PBXX

    Hello Can somebody help me to identify the difference between condition type PBXX and PB00. Why is it that, SAP has given two condition types? What is the significance of access sequence for these two condition types? Thanks for all your help. Best R

  • The Installer Database is corrupt.

    Please contact Adobe Customer Service.  I did and the representative sent me here. Photoshop CS4 install on new computer.  I deactivated it on my old computer this morning before I re-downloaded from My Orders. Jim Puckett