Hibernate not working with linux 3.7

Greetings folks.
Since kernel 3.7 I have not been able to hibernate my computer. Suspension, though, works fine.
I do not know how to log that kernel panic, I manage to shoot a video with my mobile phone and apparently there is a
WARNING: at arch/x86/kernel/smp.c:119 native_smp_send_reschedule
and
kernel BUG at kernel/hrtimer.c:1259!
I would like to provide more detailed information, please, tell me how I could log that KP in a file and if you need anything else.
Needless to say that with the kernel 3.6 everything works fine.

It seems that it has been fixed in 3.7.5. From the changelog:
The 'intel_idle_probe' probes the CPU and sets the CPU notifier.
But if later on during the module initialization we fail (say
in cpuidle_register_driver), we stop loading, but we neglect
to unregister the CPU notifier. This means that during CPU
hotplug events the system will fail:
This patch fixes that by moving the CPU notifier registration
as the last item to be done by the module.

Similar Messages

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Why my RMI is not Working in Linux???

Hiii how ru?
I am Rahul here
Well I have a problem that my RMI in not working on Linux.. so can u tell me the solution to my problem???
When i am typing following command i am getting exception as RmiNotBoundException
java -Djava.security.policy=my.policy ChaClient&
however my Server is Starting normally but client is not connection to server.
so please tell me the solution to this problem
U can contact me at
[email protected]
[email protected]
Thank u Very much...

i ran into the same issue dealing with RMI and Linux. My issue was the the stub that linux was giving you gave in the host field the ip number of "127.0.0.1" which tried to make the client connect to itself. this is how i got around it:
java -Djava.rmi.server.hostname=<ip that other clients will connect to>
so, for instance, if on a client you connect to the server with an IP of 10.5.0.1, then when starting up the java vm, you start it
java -Djava.rmi.server.hostname=10.5.0.1
hopefully that helps

Wireless not working in linux, but works fine in windows vista

Hello!
I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

Hi there,,,,,
I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
Please help me.....i have been trying to get this thing work for 3 weeks.
thanks.

Hp laserjet p1005 does not work with hplip 3.13.8-1 [FIXED]

Dear all,
my usb laser printer is a HP P1005, and it works with linux since HP released the firmware and the drivers (both provided with hplip).
I have been using this printer for 3 years now, with Gentoo and Archlinux.
From the latest hplip update (3.13.8-1, on August the 19th), I am completely unable to print: the job is sent to the printer, which *seems* to start to print (i.e., a very quick mechanical movement/noise), than it stops and the CUPS web interface reports a "filter failed error".
I tried to remove/reinstall the printer, to reload the firmware, but nothing helps.
Only downgrading the hplip package to 3.13.7-1 version fix it.
Is anyone else experiencing a similar problem?
The cups logs seem not very helpful, any idea on how to gather any useful information to try-to-fix this problem?
MJ
Last edited by MajinJoko (2013-09-08 18:47:14)

Thank you for your help.
I run hp-doctor, which reported a wrong plugin version.
So, I reinstalled the plugin (please note that the downloader needs /usr/bin/python to point to python2!), and now the printer works with the current version of hplip.
Solved!

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

VM Manager's Launch Console not working with OpenJDK and IcedTea

Fedora 15
java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
icedtea-web-1.0.4-1.fc15.x86_64
ICEDTEA-WEB NOTES
Invalid XML
An error like
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
XMLPROC_PARSE OUTPUT
$ xmlproc_parse ovm_rasproxy-ws.jnlp
xmlproc version 0.70
Parsing 'ovm_rasproxy-ws.jnlp'
E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
Parse complete, 2 error(s) and 0 warning(s)
JAVAWS OUTPUT
$ javaws ovm_rasproxy-ws.jnlp
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
JAVAWS -VERBOSE OUTPUT
$ javaws -verbose ovm_rasproxy-ws.jnlp
No User level deployment.properties found.
Starting security dialog thread
JNLP file location: ovm_rasproxy-ws.jnlp
Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
<?xml version="1.0" encoding="UTF-8"?>
line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
line: 4 <information>
line: 5 <title>Oracle VM Remote Access Service</title>
line: 6 <vendor>Oracle</vendor>
line: 7 <homepage>http://support.oracle.com/</homepage>
line: 8 </information>
line: 9 <resources>
line: 10
line: 11 <j2se version="1.5+"
line: 12 href="http://java.sun.com/products/autodl/j2se" />
line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
line: 14 <jar href="OvmCoreApi.jar" />
line: 15 <jar href="MgmtUtil.jar" />
line: 16 <jar href="Odof.jar" />
line: 17 <jar href="commons-logging-1.1.1.jar" />
line: 18 </resources>
line: 19
line: 20
line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
line: 22 <argument>-server</argument>
line: 23 <argument>192.168.4.21</argument>
line: 24 <argument>-service</argument>
line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
line: 26
line: 27 </application-desc>
line: 28 <security>
line: 29      <all-permissions/>
line: 30 </security>
line: 31 <update check="background"/>
line: 32 </jnlp>               net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     ... 8 more
Caused by:
net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)

Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
[gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
[gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
     at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
     at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
     at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
     at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.4.16
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000281734f86e6aab47
Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
INFO: Os is : linux
Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
The console starts and all is well with the world.
This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
[gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
#automatically generated - do not edit
#Tue Oct 04 16:43:29 EDT 2011
last-modified=0
last-updated=1317761009801
content-length=883
If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
Help?

Intel 6205 wireless not working with Lenovo W520

Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
1) Machine Brand and Model (PC/Laptop):
Lenovo W520
Intel Centrino Advanced-N 6205
Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
2) Wireless Brand, Model and Wireless Chipset:
$ lspci -nn
03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
3 ) check interface:
ifconfig does not show wireless
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
4 ) Check for modules:
$ lsmod
iwlagn 215351 0
iwlcore 139688 1 iwlagn
mac80211 269644 2 iwlagn,iwlcore
cfg80211 167809 3 iwlagn,iwlcore,mac80211
5) Kernel boot messages
$ dmesg
[ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
[ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
[ 13.499187] lp: driver loaded but no devices found
[ 13.502642] alloc irq_desc for 22 on node -1
[ 13.502645] alloc kstat_irqs on node -1
6 ) Network configuration
$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: 6000 Series Gen2
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: memory:d5300000-d5301fff
7 ) Scan for networks:
not relevant as no wireless interface appears
8 ) Ubuntu Version:
Ubuntu 10.10
9 ) Kernel/architecture (including 32 vs. 64 bit):
2.6.35-28-generic x86_64
10 ) Restarting the network:
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
[ OK ]
Additionally, modinfo shows the following:
$ modinfo iwlagn
filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
alias: iwl4965
license: GPL
author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi Link AGN driver for Linux
firmware: iwlwifi-4965-2.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-2.ucode
firmware: iwlwifi-6000g2b-4.ucode
firmware: iwlwifi-6000g2a-4.ucode
firmware: iwlwifi-6050-4.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-1000-3.ucode
srcversion: 8F7F4C6196599FCA596C837

Hi sparhk, and welcome.
One of the Lenovo staff who frequents the forum put out a call to help you in a private forum. I do a little Linux, so I poked into it. To my amazement my first Google hit was your thread where you indicate you have solved the problem. (At least, it _looks_ like you...)
May I respectfully suggest that a post back here indicating success would be a nice touch? That way anyone who passes by looking for help with this issue will have a better chance of finding it. For posterity, here it is (see post number 25):
[SOLVED] Intel 6205 wireless not working with Lenovo W520
Glad you got it working,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BT848 TV not working with custom 2.6.22 kernel

Hi,
I installed a custom compiled 2.6.22 kernel (built the traditional way, using menuconfig in /usr/src/linux-2.6.22) but then tvtime could not work with my BT848 TV card (error message - "not a video4linux device" and "cannot open capture device /dev/video". The device is there and a simple video app. I wrote myself says:
cyclops: Opened V4L2 device: /dev/v4l/video0
cyclops: VIDIOC_QUERYCAP: error 25, Inappropriate ioctl for device
The TV worked with kernel 2.6.21, although to listen to radio with gqradio I had to start tvtime first to get any sound. I double checked my config but can't see anything missing, I have compiled custom kernels many times and so I could say I am not inexperienced. I am using latest Arch x86-64 on an AMD Athlon 64 machine.
Has anyone else experienced this problem?
My thanks in advance!

Hi,
I installed a custom compiled 2.6.22 kernel (built the traditional way, using menuconfig in /usr/src/linux-2.6.22) but then tvtime could not work with my BT848 TV card (error message - "not a video4linux device" and "cannot open capture device /dev/video". The device is there and a simple video app. I wrote myself says:
cyclops: Opened V4L2 device: /dev/v4l/video0
cyclops: VIDIOC_QUERYCAP: error 25, Inappropriate ioctl for device
The TV worked with kernel 2.6.21, although to listen to radio with gqradio I had to start tvtime first to get any sound. I double checked my config but can't see anything missing, I have compiled custom kernels many times and so I could say I am not inexperienced. I am using latest Arch x86-64 on an AMD Athlon 64 machine.
Has anyone else experienced this problem?
My thanks in advance!

Is adobe creative not compatible with linux ?

Is adobe creative not compatible with linux ?

Windows Server 2012 is not an officially supported OS but it might work.
For reference each application has a Tech Spec link on its product page. From the Creative Cloud Apps page at https://creative.adobe.com/apps click on the Learn More link to go to the product page and you will see the Tech Spec link in the top menu.
There is a free 30 day trial for the applications. You can try them out on a Windows Server 2012 machine and see if they work to your satisfaction.

Working with Linux?? changing language?

Hello Blackberry community,
I am about to buy my fist Blackberry and I think about starting with the 8100. So far so good- but two questions I'd like to have answered first:
1. how are Blackberries working with Linux especially with Mandriva? Any of you synchronising your phone with Linux?
2. can you change the language? I am living in Italy but my motherlanguage is German. If I buy one in Italy can I change the devices language into German?
Thank you for any tips or suggestions and of course answeres!!
anything but N.... and i...
Solved!
Go to Solution.

Hi and welcome to the forums!
1) Yes you can have German as your input and operating language. Make sure you the one you purchase has the correct multilingual
package loaded.
2) Linux is not supported by the Blackberry desktop software:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13483&sliceId=SAL_Pub...
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Message Edited by Bifocals on 10-24-2008 12:56 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

S10-3t bluetooth and wireless not working with windows 8

S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian

My board is not working with any graphic cards except mine(mx400)

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...
0t is not a power suply or voltage or driver problem okey!!!!

I understand that you are frustrated, but it will help us all to help you if you create a Signature with all the info, and specs of your PC...As this info will keep us from having to guess for example, What Operating system are you running? Windows, Linux?, if Windows what version?, What type and speed Memory are you using? What type of CPU, a P-4, a Celeron, what speed?.ect. What Voltage is the Mem. set to, Voltage of the CPU?...These are all things that we need to know..Otherwise if we do not have this info we have to guess....So please we want to help ..But you have to give us all the info we need ...Sean REILLY875

JCombox does not work under linux (fedora) could you help me???

Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
     private JComboBox jComboBox1;
     private JComboBox jComboBox2;
     private JPanel contentPane;
     private JTabbedPane jTabbedPane1;
     //Main Tab
     private JPanel Main;
     private JPanel OutputSimSet;
     private JPanel Test;
     private JPanel ScriptGenTab;
     private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
     public Test()
          super();
          //initializeComponent();
          contentPane = (JPanel)this.getContentPane();
          jTabbedPane1 = new JTabbedPane();
          Main = new JPanel();
          OutputSimSet = new JPanel();
          Test = new JPanel();
          ScriptGenTab = new JPanel();
          ResultTab = new JPanel();
          SimResult = new JPanel();
     jComboBox1 = new JComboBox(
                    new String[]{"Item 1","Item 2", "Item 3"});
                    jComboBox1.addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent ae) {
                    System.out.println("Yeah");
     jComboBox2 = new JComboBox(
                              new String[]{"Item 1","Item 2", "Item 3"});
                              jComboBox2.addActionListener(new ActionListener() {
                              public void actionPerformed(ActionEvent ae) {
                              System.out.println("Yeah");
          // jTabbedPane1
          jTabbedPane1.addTab("Main", Main);
          jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
          jTabbedPane1.addTab("Simulation Result", ResultTab);
          jTabbedPane1.addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e)
                    jTabbedPane1_stateChanged(e);
          // contentPane
          contentPane.setLayout(new BorderLayout(0, 0));
          contentPane.add(jTabbedPane1, BorderLayout.CENTER);
          // Main
          //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Main.setLayout(new BorderLayout(0, 0));
          Main.add(OutputSimSet,BorderLayout.NORTH);
          OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          OutputSimSet.add(Test, 0);
          Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Test.add(jComboBox1,0);
          //ResultTab
          ResultTab.setLayout(new BorderLayout(0, 0));
          ResultTab.setBorder(new TitledBorder(""));
          ResultTab.add(SimResult, BorderLayout.NORTH);
          SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          SimResult.add(jComboBox2,0);
          // Test
          this.setTitle("Test");
          this.setLocation(new Point(0, 0));
          this.setSize(new Dimension(600, 500));
          this.setVisible(true);
     public void initializeComponent()
     /** Add Component Without a Layout Manager (Absolute Positioning) */
     private void addComponent(Container container,Component c,int x,int y,int width,int height)
          c.setBounds(x,y,width,height);
          container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
          System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
          // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jComboBox1_actionPerformed(ActionEvent e)
          System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
          Object o = jComboBox1.getSelectedItem();
          System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
          // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}

package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
     super();
     //initializeComponent();
     contentPane = (JPanel)this.getContentPane();
     jTabbedPane1 = new JTabbedPane();
     Main = new JPanel();
     ScriptGenTab = new JPanel();
     ResultTab = new JPanel();
//     OutputSimSet = new JPanel();
//     Test = new JPanel();
//     SimResult = new JPanel();
     jComboBox1 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox1.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent ae) {
          System.out.println("Yeah");
     jComboBox2 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox2.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               System.out.println("Yeah");
     // Main
     //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.add(jComboBox1);
     //ResultTab -----
     ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     ResultTab.add(jComboBox2);
    //      jTabbedPane1
     jTabbedPane1.addTab("Main", Main);
     jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
     jTabbedPane1.addTab("Simulation Result", ResultTab);
     jTabbedPane1.addChangeListener(new ChangeListener() {
          public void stateChanged(ChangeEvent e)
               jTabbedPane1_stateChanged(e);
     // contentPane
     contentPane.setLayout(new BorderLayout(0, 0));
     contentPane.add(jTabbedPane1, BorderLayout.CENTER);
     // Test
     this.setTitle("Test");
     this.setLocation(new Point(0, 0));
     this.setSize(new Dimension(600, 500));
     this.setVisible(true);
     public void initializeComponent()
//     /** Add Component Without a Layout Manager (Absolute Positioning) */
//     private void addComponent(Container container,Component c,int x,int y,int width,int height)
//     c.setBounds(x,y,width,height);
//     container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
     System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
     // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
//     private void jComboBox1_actionPerformed(ActionEvent e)
//     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
//     Object o = jComboBox1.getSelectedItem();
//     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
//     // TODO: Add any handling code here for the particular object being selected
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     private static void createAndShowGUI() {
     //Create and set up the window.
     Test frame = new Test();
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.pack();
     frame.setVisible(true);
public static void main(String[] args) {
     //Schedule a job for the event-dispatching thread:
     //creating and showing this application's GUI.
     javax.swing.SwingUtilities.invokeLater(new Runnable() {
     public void run() {
     createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc...

I have a camera that does not work with apple or IPad any way to make it work?

Is there any app or program that get the camera to down load to IPad or apple computer? It works with Linux or window.

Well, they have a website, but here is a link to their information about unlocking iPhones.
http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=6d7EKuCF_dr
You may not qualify for an unlock though.

Hibernate not working with linux 3.7

Similar Messages

Maybe you are looking for