Hidden Objects made visible, hidden again upon saving?

Hello,
I've created a form where I have a master drop down list which causes other "hidden" drop downs to become visible depending upon the selection from the master.
I have the master drop down, and four "hidden" drop downs. Depending on which selection is made in the first drop down list, one of the secondary drop downs then becomes visible. This all works just fine in the pdf form, until I try to save. As soon as I fill out the form, and save, everything that had become visible is now hidden again!
I have been trying to play with the action builder and figure out why, but with no success. Does anyone have any idea what the problem is?
Thanks!

1) Add another action to your master drop down. Add two conditions: 'is initialized' and 'text selected' with the value you want selected. Then add the same result as you did with your first action.
2) Stop using action builder
Kyle

Similar Messages

  • Invisible objects made visible revert to their invisible state after saving and opening

    I am working in LiveCycle Designer ES2 creating a decision tree that is highlighted in red as you click the Yes and No checkboxes in the document. I duplicated the arrows and made the copies red and then invisible. When the checkbox is checked, the red arrows become visible, when unchecked, invisible. The problem I have encountered is that because the default state of the red arrows is invisible, they do not stay visible if you fill out the form, save it, then open it again. When the saved form is opened, all the correct checkboxes are checked, but all the red has gone back to being invsible. I am creating and saving the pdfs as dynamic XML forms and using them in Acrobat X. It was all done with the action builder (yes, I know, stop using action builder, but I had to teach myself LiveCycle last week to get this far and havn't made it to scripting).
    I read through a post with a similar question but it involved a master drop down list not checkboxes, and I did not see how I could apply the solution in that post to my checkbox issue.
    Any thoughts on how to get the red lines to stay visible when saved and reopened?

    Hi,
    check your form properties.
    You need to activate the option to preserve script changes.
    http://forums.adobe.com/message/3835967#3835967

  • My iphone 4 started making a sound like "boing" with a vibration/ wobbly sound.  It does it at least once a day.  I've reset my phone, used icloud to restore, and it made the sound again upon startup.  Help!  This is so annoying.

    My iphone 4 started making a sound like a "boing" with a vibration/ wobbly sound.  It does this at least once a day.  It started about a month ago.  Anyone got any ideas?

    Mine does this also, seemingly randomly several times throughout the day.  I do not have this sound as any of my alerts and it does not seem to denote anything like a message, reminder, etc.  I do have "Trapster" on my phone and I went in and tweaked the settings there.  Will repost if that has any efect.

  • Could someone help me figure out why after saving a form some subforms are hidden again

    I am asking this on behalf of a coworker.  We have a form she is working on with a drop down (ddlDropDown) with 1, 2, and 3 listed (same values,,1,2,3)  That trigger hidden subforms to appear (Employee1, Employee2, Employee3).  Initially, Employee1 is visible.  If form user selects 2 or 3 in the dropdown then Employee2 and Employee3 become Visible.  Once the form is filled in, saved, closed and reopened Employee2 and Employee3 are hidden again even though the dropdown says 2 or 3.  The script behind the dropdown's change event is:
    subSELECT.Employee1.presence=this.rawValue==1?"visible":"hidden";
    subSELECT.Employee2.presence=this.rawValue==2?"visible":"hidden";
    subSELECT.Employee3.presence=this.rawValue==3?"visible":"hidden";
    I have tried adding this code to the form's initialize, docReady, preOpen, postOpen, layout:ready events but it still doesn't work.
    Any ideas?

    Here is a sample I created based on your comments and it works just fine for me after saving the form.
    Employee2 and Employee3 subforms have their presence property set to hidden.  I have the script in the exit event of the dropdownlist.
    Here is the sample:
    https://workspaces.acrobat.com/?d=YWMOMIyD2lLEqPSdO0vqYQ

  • Generating pdfs with invisible sections made visible through code

    I have a survey with several question that are either visible or hidden based on the user's selection from a Yes/No radio button group.  The user can then either submit the survey by e-mail or print the survey.  If the user prints the survey before submission, all of the invisible portions that the user's input has rendered visible are included in the printed copy; however, when the pdf is generated to be attached to the e-mail submission or saved using the Save As option, the elements that were made visible by code are not included in the pdf.  The following is the code being used in the Yes radio button:
    Comp4WhenImplementText.presence = "invisible";
    Comp4WhenImplement.presence = "invisible";
    Comp4MajorFactorText.presence = "invisible";
    Comp4WhenImplement.Comp4When03 = 0;
    Comp4WhenImplement.Comp4WhenNever = 0;
    if (Comp4No.selectedIndex != -1 ||
      Page3.Comp1.Comp1No.selectedIndex != -1 ||
      Page4.Comp2.Comp2No.selectedIndex != -1)
    CorrectiveAction.presence = "visible";
    else
    CorrectiveAction.presence = "invisible";
    The code in the No radio button is as follows:
    Comp4WhenImplementText.presence = "visible"
    Comp4When.presence = "visible"
    CorrectiveAction.presence = "visible"
    The code in the e-mail submit button:
                   form1.#subform[12].Button2::click - (JavaScript, client)
                   if (CorrectiveAction.presence == "visible")
                      if ((CorrectiveAction.rawValue == null) || (CorrectiveAction.rawValue == ""))
                   else
                   Button1.execEvent("click");
                   else
                   Button1.execEvent("click");
    Button1 is invisible and layered under the visible e-mail submit button.  It actually submits the pdf by e-mail.  The visible button performs a test and displays a message to the user if the user's survey answers fail.  I have also tried "hidden" in all of the areas that are listed as "invisible".
    What should be added or changed so that the invisible elements of the survey that are rendered visible by code can be seen in the pdf of the survey.  Any assistance would be greatly appreciated.

    There is a setting that indicates to save the changes amde via code to the form when saved. In Designer goto the File/Form Properties/Defaults and ensure that the Radiobutton named Automatically under the Preserve Scripting changes to form when saved is set on.
    Paul

  • Error and crash upon saving

    Hi,
    I am experiencing an issue very similar to the one described in (http://forums.adobe.com/message/243559#243559). I have several RH projects that have started crashing/closing when I save changes. The projects are all several years old, of varying sizes (15-200 topics), and were converted when I upgraded to RH 8 last fall. Initially, I had some trouble with the conversions, but attributed it to working with a trial version of the software while waiting for the company purchase of the full license. After receiving the license code and installing the available patches, the projects seemed to function fine for close to a month before this started happening.
    Other information:
    ·        I am using: Windows XP Professional SP3, Intel T2500 @ 2.00GHz, 2.00 GB RAM, RH 8.0.2.208. (RH HTML)
    ·        I archive files on a network drive, but work on all projects on a local drive.
    ·        The projects are not under source control.
    ·        I do not have this issue when working with the RH CCC sample project.
    I tried deleting the .cpd file before opening the project. The project still crashes upon changing and saving any topic.
    I created a new project and imported some topic files. The project worked fine until I closed and re-opened it. Then, the project returns to crashing upon saving. I tried this several times with exactly the same result.
    I don’t understand how this is related, but the only success I’ve had is deleting a line of HTML from the topics that references a javascript. If I remove the following line from a topic (save and crash the project) and then re-open the project (the change removing the line of code does save), I can then successfully save changes in that topic without crashing RH.
    <script language="javascript" src="writetitle.js" type="text/javascript"></script>
    I have been able to repeat these results with multiple topics. If I put the line back in, the project crashes upon saving – take it back out and I can save changes to that topic again. I can close and re-open the project and it performs the same.
    The code is used in conjunction with a master template that contains a feedback form. The project crashes upon saving whether or not the topic is not using that template.
    I hate to simply remove this line of code since I don’t really understand how or if that is fixing the problem and because that is what lets me know which topic any feedback is pertaining to. Thanks for any help.
    TNSdoc2

    I don't know javascript from HTML. Here is what has worked for me. I open the Broken Links dialog. I open a listed topic using the Edit button. I find and fix the broken link. I save the topic. RH8 crashes. I jump to my open RoboSource screen and check in the topic that just crashed. When I reopen the RH8 project, the link generally shows as fixed and I can move on to the next.
    In the event the check in function failed, RH8 displays a dialog asking whether I want to leave or replace the local topic from RoboSource. I have found that using the Merge button has resolved the issue so that the project remains active and the link is repaired.

  • "Object has visibility layer override" .. how do i stop this?

    using CS3...I understand what makes this come up but dont understand how to make things update...
    Here is one example where this comes up. I have a bunch of business cards with each being its own file, each with a 2nd layer to it that is just the cut area border around it. When I print each card, i want the cut border to show for the customer. When i go to actually print, i will put them all on the same sheet and print at one time. I do this by dragging the ID files into the document that will have all the cards. Of course any changes made to the individual files will automatically (sometimes manually) update on the sheet with all the cards. The only problem I run into is if after I add these cards to the sheet and they still have those borders on it, I then have to go into the individual files and turn off the layers that have that border but this will never update in the linked file on the document using it. Instead with layers, I get this yellow and red eyeball that seems to say "Object has visibility layer override". The borders will still show on the document its linked to but the individual file, the borders are not there.
    How do I get the files using the linked ID files to read just as the individual files are without showing those layers? The only way around this I can find is to remove each card, turn off the layers in the individual files, and put the cards back on...which doesnt always do the trick, but still. Thanks!

    lark,
    Select the link on the page, then go to the layer visibility options dialog. There's a filed there to keep or update the layer visibility when updating the link. Perhaps you need to change that.
    Peter

  • Solved the Illustrator CS3 Crash Error upon saving file on my OS.

    I was unable to save any Illustrator file. Upon saving a file Illustrator CS3 crashed and an error message would pop up and windows error reporting service would be launched to report the error and close Illustrator.exe.
    Until i found out that i had the "Print Spooler Service" set to manual. I always start this service manually when need to print things. So, when i started this service and did a print from MS Word, and latter on thought to give Adobe Illustrator another try, i created an illustration and click on save and WOW it saved my file without any crashes.
    To test this worked fully, i opened an older version .ai file and did some changes and used the save and save as command, both worked.
    I am relieved now.
    Espart

    This one is for all of you who couldn't get the above to work:
    I have Windows XP and CS3 Illustrator.
    This same problem happened to me in Photoshop. To fix it, I stopped Version Cue from grabbing the "Save As" window before I could save. Here's how:
    In Photoshop:
    Edit > Preferences > File Handling...
    In the last box, uncheck "Enable Version Cue." Problem solved. (I believe this may be turned on during Adobe update, but I am unsure. What I do know is the problem stems entirely from Version Cue.)
    The fix for Illustrator is a bit more complex. The same thing happened to me in Illustrator (and it used to save just fine without any changes on my part) but Version Cue was already unchecked. That is why I wound up on this thread.
    1) In Illustrator:
    Edit > Preferences > File Handling & Clipboard
    2) Uncheck "Enable Version Cue" (if it is already unchecked, this is okay, that is how mine was)
    3) Go into Windows Explorer (not Internet Explorer)
    Program Files > Adobe > Adobe Illustrator CS3 > Support Files > Contents > Windows
    4) In this folder is a sub folder called "Version Cue." Rename "Version Cue" to something else like "OLD Version Cue".
    5) You can now save files in Illustrator (may require relaunch of Illustrator).
    ***NOTE***
    From one of the above posts I found that to keep from having to kill Illustrator every time it freezes on save (pre-fix) hold down "Alt+F4" to close the invisible "Save as" window that is locking things up.
    If the above does not work, try some of the other things I did which I do not believe made a difference, but just in case:
    1) Choose a valid, online printer
    2) Close other programs
    3) Restart your computer
    4) Trash the old Illustrator preferences (Documents and Settings > (your login) > Application Data > Adobe > Adobe Illustrator CS3 Settings)
    5) When Illustrator freezes, hit "alt" then after hit "enter" then select "Move" from the drop down menu at the top left. Drag a whole bunch without lifting the left click button. Restart Illustrator. Repeat.

  • User exit upon saving the customer

    Hi
    can any one tell me what user exit is triggered upon saving the customer in XD01,XD02,VD01 & VD02 Tcodes.
    Thanks
    Sonali

    Hi sonali
    Check these user exits which are used at partner determination level. May be this inputs  will help you
    EXIT_SAPLV09A_001
    You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address should be created (duplicated).
    EXIT_SAPLV09A_002
    Call up this user exit if a customer has not been maintained in the current sales area.
    EXIT_SAPLV09A_003
    Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
    EXIT_SAPLV09A_004
    Use this user exit to integrate your own check in a program that runs before the partner is saved in the document.
    For more detailed information, see the program documentation for each of the user exits
    Regards
    Srinath

  • I cant download apps on my iphone 5, it takes me to set up 3 security questions where i am always timed out and made to start again??

    i cant download apps on my iphone 5, it takes me to set up 3 security questions where i am always timed out and made to start again??

    Call apple.This happened to me in August when i bought mine. They will reset the 3 passwords.

  • Automatic billing document creation upon saving credit memo request.

    Hi,
    I have a requirment where in :
    When a Credit Memo Request is created(va01) and upon saving the credit memo request an automatic billing document needs to be genereated i.e Credit Memo.
    How can this be achieved.
    Thanks

    Hi Keni
    If a Credit Memo Request is created and after saving the Credit Memo Request  , automatic billing should happen means you should maintain a new sub-routine and assign in the copy control VTFA . In that sub-routine maintain a logic that once the Credit Memo Request is saved automatic billing should happen
    Regards
    Srinath

  • Material Reservation Create Upon Saving Work Order

    Dear Experts,
    We have a requirement that material reservation needs to be created upon release of the PM order. However in SAP standard it is created upon saving the PM order.
    Do you know the way how to change it that reservation will be created upon release of the PM order? Is there any OSS note etc. I had a search on service place in SAP but couldnt find something relevant sofar.
    Any help, idea will be highly appreaciated.
    thanks in advance,
    Mehmet

    Hi
    Yes you can configure the system using standard setting where the reservation will be gerated after order release.
    Please follow the following path.
    1. SPRO> SAP Standard IMG setting> Plant Maintenance & Customer service-->Maintenance & service Processing > Maintenance and Service Orders>Functions and Settings for Order Types-->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
    In this step, you can define:
    Whether reservations or purchase requisitions relevant to materials planning should be generated when an order is created or only when the order is released. You do not select the field reservation/purchase requisition. The result is that purchase requisitions are only generated when the order is released, and reservations only become relevant to materials planning once the order has been released.
    I think this will resolve your query if not let me know.
    Regards
    Makarand Gurjar

  • User Exit for F-28 upon saving

    Hi,
    Is it any user exit or BADi for F-28 trigger upon saving? Please don't provide a list of user exit or BADI list. Cause i couldn't find any is suitable to user upon saving. Thanks.

    Hi,
    The badi is FAGL_SEGMENT_BS_ACC ..
    Thanks,
    Shailaja Ainala.

  • POs upon saving shopping cart (sourced) v from SOCO in classic

    Hi,
    Is there any way I can differentiate POs created directy upons saving shopping cart(sourced SC) & PO created in back end from SOCO in classic scenario.
    Is there any table where I can look for this?

    CREATED BY REQUESTER name - if FIXED source of supply
    CREATED BY BUYER name - if come from cockpit.
    SAP Note 1436207 - Change Document: Backend PO with
    incorrect creator
    Symptom
    A follow-on document is created from a requirement in the 'Sourcing
    Cockpit'. When you display the change document of this requirement, the
    system will display the last changer of this document as a creator of the
    follow-on document.
    The above are clues and you can look up tables and validatons
    Muthu

  • Add Transition to Grid control when it is made Visible.

    Hi. I have a collapsed Grid and when I tap a HyperLinkButton I want the Grid to start getting visible from the closest point from the Button or any other transition effect similar to this. To simplify my question, how do I add a transition effect to a
    Grid when it is made visible?

    Hi Clint William Theron,
    For adding the transition to the Grid control in Windows Phone, first please try to check the following articles:
    https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh452703.aspx .
    If you want to create a custom transition for the Grid control, please try to use the
    Storyboard class to help you implement it, for more information please try to refer to:
    https://msdn.microsoft.com/en-us/library/windows/apps/jj206955(v=vs.105).aspx .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for