Material Reservation Create Upon Saving Work Order
Dear Experts,
We have a requirement that material reservation needs to be created upon release of the PM order. However in SAP standard it is created upon saving the PM order.
Do you know the way how to change it that reservation will be created upon release of the PM order? Is there any OSS note etc. I had a search on service place in SAP but couldnt find something relevant sofar.
Any help, idea will be highly appreaciated.
thanks in advance,
Mehmet
Hi
Yes you can configure the system using standard setting where the reservation will be gerated after order release.
Please follow the following path.
1. SPRO> SAP Standard IMG setting> Plant Maintenance & Customer service-->Maintenance & service Processing > Maintenance and Service Orders>Functions and Settings for Order Types-->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
In this step, you can define:
Whether reservations or purchase requisitions relevant to materials planning should be generated when an order is created or only when the order is released. You do not select the field reservation/purchase requisition. The result is that purchase requisitions are only generated when the order is released, and reservations only become relevant to materials planning once the order has been released.
I think this will resolve your query if not let me know.
Regards
Makarand Gurjar
Similar Messages
-
Termination error while creating and saving Work Order from a Notification
Hi All,
While creating Work Order from a Maintenance Notification, we get a error message "Update Termination OPROL Initial Number". This happens even while creating Maintenance Notification & Work Order separately and assigning the Notification in the Objects tab of the Order subsequently.
Could any body please help in this issue.
Thanks,
SSHi Sourabh,
Please check the link:
Express Document Update terminated while Scheduling Preventive single Plan
it will help you, it is actually the Number range issue.
Regards,
Yawar Khan -
No creation if material is missing, Still IW31 ( Work order ) is getting created
Hi Experts,
I reviewed few discussions and unable to get the correct answer.
I did the configuration for Material availability check on Order Creation with Path ..
Plant Maintenance and Customer Service - Maintenance and Service Processing - Functions and Settings for Order Types - Availability Check for Material, PRTs, and Capacities - Define Inspection Control
In this I assigned my order type with Business Function 1.
Material Availability :
Plant XX01
Order Type XX09
Availability Check 1 Check availability during order creation
Checking Rule 01 No Blocked Stocked - All rec/issue elmts
Component Check Type Blank
Collect. conversion 3 No creation if material is missing
PRT Availability :
No Check ( Not checked )
Checking Rule 01 Status check
Collect. conversion Blank
Capacity check
No Check ( Not checked )
Overall profile Blank
Collect. conversion Blank
My question is:
MMBE for that Material ZERO.
Before Config,
when I create Order manually IW31 with a components , Status is showing Mat.availability not checked ( MANC ).
After Config.
when I create Order manually IW31 with a components , Status is showing Material committed MACM.
When Configured for [Collect. conversion 3 No creation if material is missing], still order is getting created.
I changed to 2 or 1 , still order is getting created with no difference
But its going to a confirmation proposals asking me to do
either continue / ATP quantity / Scope of check.
If I select 1 or 2, it should show Missing Parts status or if select 3, it should stop creation of Order. But its not happening as expected.
Please let me know where I am missing Config.Hello
Q1 )
If I change option 1 or 2 :
1 User decides on creation if material is missing
Answer:If Material is not Created the system wont allow to add you that material until unless you create the material master created.I am considering here that you don't have material master
2 Creation even though no material is available
Answer:It will allow you to create the work order.i am considering here that you don't have sufficient stock.
Q2) what should be the expected Status for Option 1 or 2.
Before Config it was showing
Status is showing Mat.availability not checked ( MANC ).
After Option 1 or 2, Expected Status ?
Answer: You need to enter value 02 on the Availability Check field on the MRP3 tab of Material Master via TC MM02.
you will be get Material committed MACM after Saving the Order.
Br
Rakesh -
Dependent reservation created instead of planned order
Hello Experts,
After MRP run for some material only dependent reservation created instead of planned order?
What would be the problem?Stocks must be available on date of requirement.
-
Reservation created from a PM Order needs to create an automatic TR
Hello Experts !!
Needed your help much in a scenario where,
A reservation created from a PM Order needs to create an automatic Transfer Requirement (TR) in WM directly which can later be converted to TO.
(Please note that, I want to skip the GI part in IM with respect to reservation)
Kindly suggest if there is any standard configuration for the same.
Do batch jobs / user exit can only do it ??
Regards,
MCIf you don't want to wait until PM order confirmation, use batch program for MB26 to issue committed quantities.
Please note that MB26 will not handle serialized material issue.
Thanks, -
Is there a way to create a corrective work order off a prevenative workore
Hello,,
Is there a way to create a corrective work order off a preventive/inspection work order. Or is there a way to indicate that a corrective work order was created from preventive/inspection work order. In addition is there a way to report these changes.
Thanks.Yes, first take your PM WO#, and go to Transaction IW36<p>
<p>
This process is how to create a "sub-order"<p>
<p>you will be asked to enter in the "superior order", in this case it will be the PM Work Order you want to be the "parent" -
Create GIS benchmark work order by calling stored procedure in WAM?
We currently have Oracle Utilities Work and Asset Management(WAM) Version 1.9.0.4.7 implemented in our test environment. Our WAM has GIS related asset data. We are able to create GIS benchmark work order through WAM web interface. I am currently working on a web application that presents GIS work order data on the map and allow users to create new work order etc. I am wondering if it is possible to create GIS benchmark work order by calling a stored procure from WAM database? Has anyone done this before?
fyi
Related to the solution/workaround posted by Luc.
see "Do Oracle's JDBC drivers support PL/SQL tables/result sets/records/booleans? "
at http://www.oracle.com/technetwork/database/enterprise-edition/jdbc-faq-090281.html#34_05
regards
Jan Vervecken -
Release strategy for PREQs created from PM work order
Hi All,
I have an issue with determining release strategy for purchase requisition for external services created via PM work order (iw31 transaction).
We have activated release strategy for Purchase requisition based on the following characteristics:
CEBAN_PLANT
CEBAN_COST_CENTER_GROUP
CEBAN_MANUAL
Characteristic CEBAN_COST_CENTER_GROUP is defined via user exit based on the cost center used in the PREQ and a z table which contains all cost centers mapped to the corresponding cost center goups.
In the user exit we have consider to cases:
The first one is when a purchase requisition is created with account assignment K (cost center) then system is checking the z table and determines the right cost center group.
The second case is when a purchase requisition is created with account assignment F (internal order) then based on the order type and number the cost center in the order is defined and based on it the corresponding entry in the z table cost center group is assigned.
The third case is when purchase requisition for services is created automatically from PM work order. In this case the PREQ is again with account assignment F, but at the time when user exit is checking the input parameters the real number of the work order does not exist and system can not defined the other parameters.
We have defined for this requisitions in the release strategy for characteristic CEBAN_MANUAL creation indicator " F".
Has anybody of you defined release strategy for PREQs created out of work order before. How did you manage to trigger the release strategy?
Best Regards,
DesislavaHi,
For PM order find the costcenter in the settlement rule of the order or else find the costcenter in the Location tab of the order.
Consider this filed from order & write in the Z program to pick up the costcenter from there to find out the cost center group.
Regards,
Raj -
How to find the material received in warehouse for work order through table
Dear All ,
I am creating alerting system We have requrirement that if the notification or work order is pending for 10 days then alert to be sent to planner and 20 days to his senior and 30n days to his senior
We have created FM for this every day program will run and check open work orders and notification pending for some days
Now my question in the FM I want to add fields for material receipt
Idea is say for refuebsihment order pending material is received in warehouse now when this is received alert to be send in the work order planner that material is arrived
From which tables I can track this and how to know for the alerting system that material is arrived in warehouse so alert to be send
please reply
Regards
pratap
Edited by: Pratap bhikai Ingole on Jun 5, 2010 9:20 AMHi ,
With reference to your second point , if your looking for some alret then whenever you have goods receipt or goods issue of stock material you can have a mail triggerred through workflow .. in our project what we did was , we had a user status ALMR - All Material received and this is SET by a Z programme which checks whether all stock materials or non stock materials against the order have been received and sets the user status and this programme is run as a batch job with 30min frequency ....
regrds
pushpa -
View labor and material costs in plant maintenance work order
Hi
I am aware we can bring in the costs in the work order through Activity types and assigning the costs to the acitvity type.
Is there anyway we can bring in the actual cost for the work performed by the associate? should we link the work center to HRMS?
Please advise. I need your valuable input for all the points below.
Main points that need to be addressed:
1. Each associate that is capable of confirming hours to a work order needs to be assigned an hourly rate that is reflective of the actual cost for the work performed by this associate. These hours are then tracked through the work order to give a cost for labor assigned to that particular job.
2.Any materials used in the performance of the required task(s) dictated by the work order will be assigned to that order. These materials can be assigned through SAP purchase requisitions, tool crib spot buys, or procurement with a purchase card.
3.Standard reports need to be created so we can track the total maintenance costs for any level of the equipment hierarchy as currently set up in SAP. When this report is created it should show the total maintenace costs for all the levels of the equipment hierarchy broken down into labor cost and material cost. I am using Tcode IW37N and IW40 . Is there any suggestion?Greetings Chandra,
1) You will need to create Work Centres for your associates and create the Activity Types. You can default the Activity Type for each Work Centre and maintain the rate for the activity via t-code KP26 planning.
2) Planned and unplanned Purchase Requisitions for Components with category N will debit the order with material costs. But what do you mean by "tool crib spot buys" and "procurement with a purchase card"? You may need to develop a solution to do such postings to the Order (or for purposes of Cost controlling, manual activity allocation similar to confirming work may be desired such as Manual Activity Allocations via CO transactions (KB21N), unless you can cover that with Purchase Requisitions and POs with "F Order" account assignment.
3) MCI8 Cost Report should be suitable for you, once you set up the Value Categories & Cost Key Figures.
See
PMIS Cost Analysis Reporting Overview
Maintenance Cost Key Figures in MCI3 and MCI8 Reports
PM Order Value categories and costs display -
Item text is not copied in PR created thru maintenance work order
my colleague have done the config in MM (MM > Purchasing > PR > Text for PR > Define Copying Rules). When i create a PR from ME51N, the item text and material PO text was copied.
However, if i create a PR from a maintenance work order, only the material PO text is copied while item text is still empty.
Is there some config i miss in PM side?Hi all
for any one with similar issue, you can use Badi MD_CHANGE_MRP_DATA to solve the issue.
check this thread.
http://scn.sap.com/thread/979697
Regards
Kwame -
Approval for material return issued against the Work Order
Hello,
We are using PM module and issuing materials against the work order. Many times users are returning the un-used material back to stores. This un-used material may come back <b>with or without</b> work order reference. i.e. Sometimes they just return bunch of material but don't know the work order # against it was issued initially.
We need to control this flow of un-used return material through proper system approval.
How can do this.
Thanks,Hi,
In standard SAP There is no approval process to return the material.
I have one work around , you can create one PM order to return the material & instruct your store people to receive the material only with reference to PM order.
With out releasing a PM order, system will not allow to post the goods return.
I hope it may help you.
Regards,
Manish -
How to read all material documents created for a service order /maint.order
Hello,
in my Z-Program i need to read all material documents which are created for a service order or maintenance order.
Is there a function module which could be used or do you have some other hinds for this requirement?
Thanks a lot.
Kind regards
ManfredHI,
Have you tried BAPI_ALM_ORDER_GET_DETAIL for fetching components details. Actually we have used it to get some other details.
Regards
Shakti -
Material Price warning before saving Purchase Order
Hi everyone,
While saving the Purchase Order ..I want the system shud prompt (as Warning Mesage) the current MAP of material so that user doesnot put any erratic price..
I had done it last but cud not recollect the settings......
Will anyone help me to tell how this can be done...
Regards
Vikrant...Hi Yogesh/Dhruba/Arif/Stephen..
At first Thanks to everyone of you for contributing.....
Yes i am able to do the needful.........But yes theres one more thing which we have to maintain....
In Spro-MMpurchasing-Purchase order-Set tolerance limit--- tolerance Key PE
Here for specific company code you have to maintain the price variance tolerance then only this setting i.e version 00/06/205 works...
I our case for the company code there was no price variance limit maintained...
I maintained it and now its working....
Thought of sharing this with all of you
Regards
Vikrant......... -
Work Order Material Availability Check Customizing
Hi,
I am currently trying to set up material availability check in the work order before saving. I am testing it by entering a material in the work order for which there is zero stock. Then clicking on ORDER > FUNCTIONS > AVAILABILITY > CHECK STOCK MATERIAL. However SAP would return 'All checked materials in order 100000317 are available' in status bar.
My customizing is as follows:
Define Checking Rules (SPRO):
PM Checking rule for plant maintenance
Define Scope of Check (OPJJ):
Availability Check: 01 (Daily Requirements)
Checking Rule: PM (Checking rule for plant maintenance)
Availability check: 2 (Check availability during order release)
Stocks
Include safety stock: X
StockIn Transfer: X
Incl. quality insp. stock: X
Replenishment lead time
Check without RLT: X
In/outward movement
Incl. purchase orders: X
Incl. purchase requisitions: X
Incl. dependant reqs: X
Include reservations: X
Include sales reqmts: X
Include deliveries: X
Incl. planned orders: X (check all planned o)
Incl. production orders: X (take all production)
Define Scope of Check (OIOI):
Plant: (Corresponds to Work Order)
Order Type: (Corresponds to Work Order)
Check material availability when saving order: X
Check rule: 02 (Corresponds to material being used)
Release Material: 3 (No release if parts are missing)
PRT Availability: No check
Capacity Availability: No check
I would appreciate if you could indicate if I am missing something in the customizing or if there is some sort of error. I would like SAP to display a system message on the status bar stating that this material is not available once the user enters this material.
Regards,
NikolaiI'am facing the almost the same problem. Could anyone tell me:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-
Maybe you are looking for
-
Driver won't install and setup won't finish on windows 8.1 64bit
Hi We have a HP PSC 1410 All-In-One installed on an old pc with windows 7 and the printer is working fine but I decided to move the printer and plug it in on my brand new ultra high end gaming pc with win 8.1 64bit on it for obvious reasons, because
-
IPad1: Can apps be installed from desktop iTunes?
I recently purchased a new iPad (1st gen) and want to install some apps that are currently downloaded onto my desktop iTunes. I do not have Wi-Fi where I live. I've tried to drag and drop the apps to the iPad, but when iTunes syncs with the iPad, t
-
We are maintaining one tax condition ZADD for Additional Tax in Kanpur Region. As the % of Tax has been changed from 0.5% to 1 we have maintained the same in VK11 condition records. For the new orders it is picking up the present tax % and invoice an
-
OS X 10.5.4 ignoring my preferences settings
I posted this question under a different heading, but after thinking about it I think the multiple symptoms are all attributable to OS X ignoring my preferences settings. I'm experiencing the following problems. First, after working fine for months (
-
Question about Google Translator with flags for BC website
Hello I am looking for a solution for my website , I am using Business Catalyst as platform to create the website. I am looking for simple one code/plugin/HTML solution which I can copy paste in the website for the translation. I want to put google