Hide a report in a WebI doc when exporting to PDF

Hi everyone,
I have a Web Intelligence document that has a "Data Only" report in it. This is a tab that is for the purpose of exporting the data in the report to excel without formatting and grouping in it so that the user can easily manipulate the data in excel without the need of cleaning up all of the formatted groups.
When I choose "Save to my computer as..." and choose PDF, is there a way to exclude this report from exporting into the PDF? Likewise if I choose to export to XLS, I need to have the tab (report) included in the excel export.
Thanks,
Chad

Chad,
There are two ways to run a report, either via Infoview (which around here we call that "Read-Only" mode), and via Java (or Modify Mode).  So, the answer to your question is "maybe yes" and "no".  Definitely "no" if you're processing in read-only mode.  If you process in Modify mode and click on "Save to My Computer As", then also "no".  If you click on the "Print" icon, then you'll notice a slightly different dialogue screen, and it is on this dialogue screen that you see more specifications in terms of pages to print and report, etc.  So the technique would be to first navigate to the tab you're interested in saving as a PDF, then click on the Print icon, go through the dialogue screen, and once you click OK you'll get one more menu, asking to either "Open", "Save" or "Cancel".  If you click open you're report (the current tab only) will appear in an Adobe screen and if you click save than instead of Adobe opening you'll just send the PDF right to the hard drive.
Hopefully this clears up the air for you and you can now see the options at hand.
Thanks,
John

Similar Messages

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

  • Formatting and alignment issues in Crystal Reports when exported to PDF

    Hi Experts,
    When we export the crystal reports 2013 reports to PDF we are facing issues with formatting and alignment. The columns are overlapping and also for some column's data, we are able to see only some parts of text when exported to PDF.
    Data source for these reports is EHP 7 (SAP ECC 6.0), BO 4.1, Crystal reports 2013.
    As these reports are on priority, your help and suggestions are much appreciated.
    Looking forward to hear from you guys.
    Thanks & Regards,
    Vijay.

    Hi Vijay,
    Search for the following in the search bar at the top right of SCN's page:
    ForceLargerFonts
    UsePrecisePositioningForText
    TruncationAdjustment
    All these are registry keys that you might need to apply on the machine.
    -Abhilash

  • Background Colour Incorrect when exporting to PDF from Crystal Reports 2008

    Hello All
    When exporting to PDF from CR2008 the background colour of the crosstab is incorrectly displayed. The problem is as follows to create a crosstab with a grey header row and column details in white we have used the following trick.
    Format Cross Tab Border Background is set to Silver.
    Crosstab Expert Grand Total Background colour is set to white.
    The result is a crosstab with header in grey and details in white.
    This report displays correctly in CR2008, and exports as seen on screen to everything but PDF. When exporting to PDF the Crosstab is completely grey taking on only the Background colour of silver, and ignoring the Grand Total Background colour being set to white.
    What is strange that when I print to PDF the format is also displayed exactly as required,
    Any help on this matter would be greatly appreciated.
    Some additional details.
    CR2008 version 12.3.1.683
    Adobe Reader version 9.3.3
    Windows XP Professional
    Thanks
    Phillip
    Edited by: Phillip L on Nov 23, 2010 1:51 PM

    If this is a big issue for you then please purchase a case and a Rep can duplicate and escalate to R&D.
    As a work around export to Editable RTF and in Word 2007 you can get a PDF export plug-in and then export to PDF.
    Thank you
    Don

  • Crystral reports viewer activex control 11.5 - export to pdf - misaligned

    good morning
    i have been advised to post here for a better response
    i have a slight issue im trying to get an answer for with crystral reports viewer activex control 11.5
    when exporting data from the report on screen to pdf, everything is mostly ok except for some lines which are not correctly aligned with everything else
    when i do a print instead to software such as primopdf, the alignment is fine, its exactly as it looks on the onscreen report, howeverm primopdf is unable to print the whole report due to a control error & it also takes far too long exporting the data out of crystal reports
    obviously, getting the activex control export to pdf working is the preferred option, else why bother using it
    has anyone else had similar issues & what did you do to resolve?
    i wouldnt be suprised if the answer is simply to update to the latest version
    Thank You & Regards,
    Matteo Vinci II GradOIEAust
    SD Innovative Solutions

    Well, perhaps not the latest version, but certainly the latest Service Pack would be the place to start. For CR XI r2 (11.5), the latest SP can be downloaded from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006255422008E/crxir2_sp4_inc.exe
    If that does not help, have a look at [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d3639373635463644364636343635334433393339333832363639373635463733363137303645364637343635373335] kbase.
    Now, the above was created for CR 10.2, so the registry for CR XI r2 is:
    HKLMsoftware usiness objectssuite 11.5crystal reports.
    You may have to create the "Export" folder and PDF folder so that this looks as:
    HKLMsoftware usiness objectssuite 11.5crystal reportsexportpdf
    Now, Right-click the pdf sub key and click New > DWORD Value. Name the DWORD value "ForceLargerFonts" and set it to the value of 1.
    Restart IIS, and try the application again.
    If this does not help, let me know if this is a web or a win app.
    Ludek

  • Format Changes when Exporting to PDF

    I'm using Crystal 12.0 and have an issue very similar to these threads listed below. 
    While viewing a report on my development machine, all is fine.  I can export to PDF and the formatting is OK. 
    However, when the report is exported to PDF on the web server, the spacing between some of the text is off.  The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field."   All that's supposed to happen here is several spaces are used to move the text under the proper column. 
    When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces.  I wondering if the below threads apply to Crystal 12.0. 
    Thread:1220516 and
    Format Changes when Exporting to PDF
    Thanks kindly for your assistance,
    -Marty

    I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
    I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
    The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
    Thanks!
    Edited by: WanderingEye on Sep 18, 2009 4:54 PM

  • Any way to reduce the resolution when exporting to .pdf

    We are emailing reports.  On some reports with a large number of jpegs we are hitting a size limitation.  It would be helpful to reduce the resolution on the jpegs when exporting to .pdf.  Any way that would be possible?

    Hi,
    Need more info-
    VS version? or the developing application?
    CR Version? Are you directly emailing your reports from CR designer?
    Also once the image is fetched by the report, we can not make any changes in the image, as a work around you need to do required changes in the image before adding it to the reports, and as far as I know it is not possible through code, but we can wait for other responses though.
    Sincerely,
    Amit

  • Images downsized and converted when exporting to PDF

    I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
    Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
    My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
    This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
    I found an old thread on another forum where this problem occurred but a solution was not found or posted.
    Any ideas?
    Michelle

    This reply is a series of comments and suggestions rather than a definitive answer.
    1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
    2. Never copy/paste a graphic or table into PageMaker.  Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
    When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
    (You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
    3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows 
    4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
    5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF.  Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
    6. It's time to leave PM and move on to InDesign - see it as PM Ver 13. 
    7. Aternatively, use PM7 on a contemporary Win2K PC.  http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

  • Error in character spacing when exporting to pdf from word 07

    I am having trouble with exporting to pdf from MS Word 07.  The character spacing throughout the document is wacky.  This also happens when exporting to pdf from a GIS program.
    Any help?

    I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
    In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
    I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
    As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed.  Some are embedded, some embedded subset, some are not embedded at all.  I use styles to manage font types and heading levels.  There is nothing fancy about it - all Times New Roman.

  • Indesign CS6 8.0.1. crashes when exporting a PDF

    I am having a problem with Indesign CS6 8.0.1. When exporting a PDF Indesign crashes everytime. Here is the crash report http://pastebin.com/qYu9cWwP
    I am on a mac running 10.7.5
    This happens with every file I try to export every time.

    I don't know what it means, but the crashed thread is making the same call: 511 com.adobe.InDesign.Print            0x17bf6703 GetPlugIn + 497427 more than 500 times. Are you exporting to PDF, or printing?

  • Can you retain text highlighting when exporting to PDF from InDesign?

    Hi,
    I have several publications that are now going to be reviewed by another individual and I was planning to export them to PDF.
    However, I've already highlighted bibliographic references, table call outs, figure call outs in the InDesign file using different colors and I was wondering if there is a way to retain that highlighting when exporting to PDF? Just thought it might make their life a little easier since I already have all that done in the file.
    Thanks!

    Ah ha! Got it! All I needed was your prompt! I looked to make sure that it was set up as conditional text and noticed the Show/Hide option at the bottom of the pop-up. (I knew I saw something before that would allow this, but couldn't remember where!)
    Thanks for jogging my memory!

  • Group Header is not repeating when exported to pdf in 2008 r2

    Hi
    i have a typical scenario here , when i am trying to repeat my group header it is working fine in report viewer but when i exported to pdf it is not repeating. yea it is working fine in excel.
    could some one help me in this as i tried various ways but couldn't able to figure it out 
    PS: i am using 2008r2
    if this is the issue in 2008r2 , did it got fixed in any new version please suggest.
    thanks
    sharath 

    Hi sharath,
    Based on my understanding, the group header doesn’t repeat when you export report to PDF file.
    In Reporting Service, the RepeatOnNewPage property has effect on static row members only and where KeepWithGroup is not None. If value for KeepWithGroup is None, the group header will not appear in a new page. As we tested in our environment, we set FixedData
    as True, KeepWithGroup as After and RepeatOnNewPage as True, the group header repeat in second page when export to PDF file. Please refer to screenshot below:
    So in your scenario, please check if you have set KeepWithGroup as After. Then export to PDF again to check if group header can repeat in multiple pages. If issue persists, please provide some detail information about your report design. If possible, please
    provide some screenshots about your results before and after perform PDF render.
    Reference:
    Display Headers and Footers with a Group (Report Builder and SSRS)
    If you have  any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Problem with subscript and superscript in tables when exporting in .pdf

    When I put some words in superscript (or subscript) in a table, a bug occurs when exporting in pdf (whit export or print either). All the words in the cell after the subscript part disappear in the pdf version. The rest of the table or the document isn't affected. It's really strange and it has occured since I shifted for the 5 version of Pages...
    I've no idea what to do...

    Pyregnier wrote:
    I've no idea what to do...
    It is a long standing bug in Pages 5.
    Pages '09 should still be in your Applications/iWork folder.
    Peter

  • Error when exporting a pdf in SAP

    She sends me the error when exporting a pdf from the SAP system, this is the message:
    X Object reference not set to an instance of an object.
    I hope I can support.
    Annex image

    See your other thread.

  • I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

    I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
    Windows 7 64
    PC

    everything works on a laptop (

Maybe you are looking for