Hide border off griditem when image isn't in database

hi,
I made a mxml page that load multiple pictures from a
database using Http service, i want to give that image a button
function and when i press it becomes enlarged in a titlewindow,
I already made the mxml for that titlewindow but dont know
how the code should look like.
can you please help me.

nvm about the first question i already fixed it with an
httpservice and array,
My second question is about these images, they are located in
a griditem with a border, now i want that the border off the
griditem is false when it doens't find an image in my database
i named the griditem grid9 en image id is img9 i tried this
with an if else statement but i receive only errors.
all idea's are welcome.

Similar Messages

What should i do if my ipod turned off and the batterie isn't dead and my computer wont respond when i plug my ipod in

what should i do if my ipod turned off and the batterie isn't dead and my computer wont respond when i plug my ipod in

hey there...i have the same issue i turned off my ipod and not i cannot start the unit again. I bought this in Dec and know for sure my batterie is good....please help......

My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. Please help!

My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.

Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh

IPhoto will not let me close, force quit, or turn off the computer because it says it is "importing photos" when it isn't. How do I fix it?

iPhoto will not let me close, force quit, or turn off the computer because it says it is "importing photos" when it isn't. How do I fix it?

Thank you- so simple, and it worked!

Img alt="text" not displayed when images are turned off in Safari

I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?

It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)

My computer froze and I had no choice but to turn it off. When I turned it back on, it would no longer open iTunes. It says "error 7 (windows error 14001). iTunes said to uninstall and then reinstall iTunes. Windows installer won't work.

My computer froze, so I had to finally turn it off. When I turned it on again, it wouldn't open iTunes. Error7 (Windows error 14001) appeared. I could not uninstall and reinstall iTunes because now Windows Installer isn't working either. Tried using "System Restore" from a backup, but still didn't fix problem. Tried online purchase of registry cleanup ("Error End"), but that didn't solve problem either.
How can I get iTunes to open? Any suggestions for getting Windows Installer to work? Thanks!

Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh

Putting a border on a cropped image/video in FCE 3.5

Hello folks, my first post so be gentle.
Can anyone tell me how I can put a border on a cropped image or video clip in FCE 3.5?
At the mo if I want a border on a PIP I need to scale it down then make the border thicker, it meens the area that I want to see in detail (the PIP) is smaller than it is in the main window.
So cropping is the obvious solution but when I do the border gets cropped out too.
I could do it with miltiple layers but it seems a messy workaround.
Cheers
Craig

Please excuse me for horning in. Andy's instructions specify this plugin is for Final Cut Pro. Do you know if it is also good for Final Cut Express?

How can I get the picture to show in Photoshop? The thumbnail image appears in the right side panel but the full image isn't showing at all.

How can I get the picture to show in Photoshop CS3? The thumbnail image appears in the right side panel but the full image isn't showing at all.

What specific information would you need? The program was working just fine early yesterday morning and than when I came back in the afternoon to edit some more pictures that is when I wasn't able to see the full image anymore. It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel.

Unwanted margin cutting off design when printing document

I've laid out a design in InDesign that is meant to be printed on a precut 5.5" square card. The document is set up as a 5.5" square with no margins... my design is set to the edge of the card on the screen. when i print on 8.5"x11" everything is fine all images appear - nothing is cut off. when i print on my precut cards the images get cut off by a 1/8" margin on all edges of the card. printer settings are set to have no margins as well. i've never had this problem before and can't seem to solve it. i tried to make the document a PDF and print it that way but the same thing happened. i contacted epson (i print with an epson RX595) and this is what they said:
"The program that you are having problems printing from probably requires a Postscript Printer Definition (PPD) and this printer does not have one available from Epson. In order to get a PPD for the printer, you will need to look for third party RIP programs that will work with your printer.
Another option may be to save the file as a PDF before printing as this will mask PS fonts and EPS files (even if you do not use PS fonts this may be necessary).
If the issue persists, we recommend contacting the program vendor or Apple for additional support."
any help on this issue would be greatly appreciated!! thanks!

Just a guess, but if this is a borderless printer you probably need to click the setup button in the print dialog to access the driver settings, and pick the borderless page size there, then set the size inthe print dialog to "defined by driver."
Peter

HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do n

I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

TS1292 I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

roaminggnome was referring to the page that you posted from i.e. http://support.apple.com/kb/TS1292
You've tried contacting iTunes Support as it suggests on that page ? If not then you can contact them via this page and see what they say (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Battery reporting it is fully charged when it isn't

Hello,
Read through some of the forum posts last night and this morning to see if my question was answered but didn't really see anything. Here is the issue:
Problem:
Macbook Pro's Battery is reporting that it is fully charged when it isn't. This is displayed on both the Energy Settings under System Prefs and on the On Board Battery Meter. Issue started yesterday afternoon. If I unplug my machine from the charger, it'll last for all of a minute before it turns itself off.
I have tried multiple reboots, system updates and have even gone as far as clearing the SMC, none of these "fixes" worked. I do let the battery cycle all the way down till I get the "Low Power" notification before switching over to the power adapter on a daily basis. I believe that this is a hardware issue on the battery end since it itself is reporting a full charge.
Bought the unit back in February 2008, so I am well within my warranty, but thought I would get some ideas before I head into the store today.
Here is the Power Section from my System Profiler:
Power:
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-3766-2f3
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 65336
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 65336
Health Information:
Cycle count: 93
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 10519
Thanks for any information you may have on this issue.
Steve Simon

Welcome to the Forums!
Thanks for looking for the answer first - it's tough without the search function (which has been temporarily disabled).
Definitely take it in for service, as a brody suggests.
One side note (and the reason for this post) - you state +"I do let the battery cycle all the way down till I get the "Low Power" notification before switching over to the power adapter on a daily basis."+ This is actually quite bad for lithium-based batteries like the one in your MBP. Nickel-based batteries (NiCd, NiMH) have a 'memory' and need to be used like that. Li-based batteries have no 'memory', and full discharges are actually bad for them. Frequent, light usage is best.
Hope this helps (with your next battery!)...

Mac says usb stick is full when it isn't

I'm trying to copy files to a usb stick but my mac keeps telling me the stick is full, even when I know it isn't. Deleting other files on the usb stick doesn't help at all. I've tried a few different sticks - sometimes I can get it to work but eventually it decides the usb stick is full even when it isn't and even if I delete all the other data off it, and then it won't copy.

Hi and welcome to  Discussions.
Just remember, after you delete something you'll need to empty the trash to recover the space, and for the USB stick it will need to be attached whilst that recovery takes place.
Message was rephrased by: roam

Error: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help."

I have received to following error from at least three different applications when they have attempted to auto-update recently: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help."
I am not running off a disk image and I have admin privileges... Not sure what the problem is, but it just started happening (a week or two ago) and I have never previously had a problem with these applications auto-updating. I have repaired permissions and attempted other "fixes" found on the interweb, but nothing works. Also, this is only happening on my iMac (27" Intel i5) and not my MacBook Pro (17" Intel i5) -- both are running Lion. Please help!

If you updated using the default install (merge) from before Tiger, you may be seeing an issue that we saw when Leopard first came out last year.
Not sure of the fix - it was not simple - but if you search back in these forums you might find something that will help. I believe it deals with the numbers assigned to accounts (501, etc).
If you open your Accounts Preferences and unlock the padlock, right-click Advanced Options and read your User ID and Group ID. Let us know what they are.
Now, in the other user admin account, do the same thing.
One of the real experts who knows much more about this than I may be able to then help.
And be sure to check out this article
http://pinkmutant.com/articles/Leopard/leobugs.html

I want to remove or hide the Details Panel. when using OpenDoc.

Hello I'm Yong ho Park.
I recently had hard time because of Details Panel.
I want to remove or hide the Details Panel. when using OpenDoc(Dashboard file).
My system's version is BI 4.1 SP02.
Is your problem solved??
If your problem isn't solved, I want to be offered related formation.
I need your help. !!

Hi,
you cant hide the Details Panel. This behaviour is By Design.
http://service.sap.com/sap/support/notes/2021076
Regards
-Seb.

Hide border off griditem when image isn't in database

Similar Messages

Maybe you are looking for