Hide parameters of URL Reporting using Open Document
Hi,
I just want to know if I'have to use SDK to improve URL Reporting on SAP BusinessObjects BI Platform 4.0 ?
I have to hide the connection parameters as "apsuser, ...etc" in order to show a simple and safe URL to extract reports.
Just want information about "how to do that and what I need to do thaht ?"
Regards,
William
Stdout.log :
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
com.businessobjects.webpath.rebean3ws.Activator
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
stderr.log
6 févr. 2012 18:13:23 com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Mojarra (1.2_12-b01-FCS) for context '/BOE'
6 févr. 2012 18:13:25 com.sun.faces.spi.InjectionProviderFactory createInstance
INFO: JSF1048: PostConstruct/PreDestroy annotations present. ManagedBeans methods marked with these annotations will have said annotations processed.
6 févr. 2012 18:13:47 org.apache.cxf.transport.servlet.CXFNonSpringServlet loadBusNoConfig
INFO: Load the bus without application context
6 févr. 2012 18:13:51 org.apache.cxf.transport.servlet.AbstractCXFServlet replaceDestinationFactory
INFO: Replaced the http destination factory with servlet transport factory
6 févr. 2012 18:13:52 org.apache.cxf.service.factory.ReflectionServiceFactoryBean buildServiceFromClass
INFO: Creating Service Gateway from class com.businessobjects.services.coresdk.wsgateway.GatewayPort
6 févr. 2012 18:13:52 org.apache.cxf.endpoint.ServerImpl initDestination
INFO: Setting the server's publish address to be /Gateway
6 févr. 2012 18:14:02 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration BusinessProcessBI.xml
6 févr. 2012 18:14:05 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: ATTENTION: Le nom de rôle de sécurité noaccess est utilisé dans un <auth-constraint> sans avoir été défini dans <security-role>
6 févr. 2012 18:14:07 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration dswsbobje.xml
6 févr. 2012 18:14:09 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: ATTENTION: Le nom de rôle de sécurité noaccess est utilisé dans un <auth-constraint> sans avoir été défini dans <security-role>
6 févr. 2012 18:14:09 org.apache.catalina.startup.ContextConfig validateSecurityRoles
INFO: ATTENTION: Le nom de rôle de sécurité SAPRole est utilisé dans un <auth-constraint> sans avoir été défini dans <security-role>
6 févr. 2012 18:14:14 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration explorer.xml
6 févr. 2012 18:14:15 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration explorer_help.xml
6 févr. 2012 18:14:15 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration host-manager.xml
6 févr. 2012 18:14:15 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration manager.xml
6 févr. 2012 18:14:15 org.apache.catalina.startup.HostConfig deployDescriptor
INFO: Déploiement du descripteur de configuration MobileOTA14.xml
6 févr. 2012 18:14:15 org.apache.catalina.startup.HostConfig deployWAR
INFO: Déploiement de l'archive jsfplatform.war de l'application web
6 févr. 2012 18:14:16 org.apache.catalina.core.StandardContext addApplicationListener
INFO: The listener "com.sun.faces.config.ConfigureListener" is already configured for this context. The duplicate definition has been ignored.
6 févr. 2012 18:14:16 org.apache.catalina.startup.HostConfig deployWAR
INFO: Déploiement de l'archive MobileBIService.war de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire CMCDoc de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire docs de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire examples de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.core.ApplicationContext log
INFO: ContextListener: contextInitialized()
6 févr. 2012 18:14:17 org.apache.catalina.core.ApplicationContext log
INFO: SessionListener: contextInitialized()
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire InfoViewDoc de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire ROOT de l'application web
6 févr. 2012 18:14:17 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Déploiement du répertoire test de l'application web
6 févr. 2012 18:14:18 org.apache.coyote.http11.Http11Protocol start
INFO: Démarrage de Coyote HTTP/1.1 sur http-8080
6 févr. 2012 18:14:19 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
6 févr. 2012 18:14:19 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/103 config=null
6 févr. 2012 18:14:19 org.apache.catalina.startup.Catalina start
INFO: Server startup in 349629 ms
Similar Messages
-
Linking a WEBI report through hyperlink in a webpage using open document
Hi All,
I have a hyper link in a web page which when clicked should open a WEBI report. I created it using the open document feature.
Once clicking on the link, InfoView login credential page is displayed. After logging in the report runs.
My client does not want the login page to be displayed since most of the users does not remember their password (since SSO is implemented).
He wants to bypass this login page so that most of the users can directly view the reports.
Question:
Is there a way to achieve this i.e without asking for login credentials or by passing this?
Possibilities :
1: To create ID's for all the people (which I think is not a feasible option in my project)
2: Create a guest account with minimum privileges and share the password with all the users.
Note:
1: I use BO XI R 3.1.
2: No SDK is installed to do any programming.
Any suggestion are most welcome.
Thanks in advance
ShreyasHi Shreyas,
Manual Easy Way for doing the activity in SAP Business Objects 4.0:
This method is useful if we have a special system account that we want everyone to use.
You will notice that all we do is generate a logon token using the appropriate username, password and CMS variables. Then we append the token onto ivsLogonToken.
Note: The numbers on the url after /BOE/portal represents the timestamp of the last patch or install. You can put whatever you want under the number section and Business Objects will automatically redirect to the appropriate start.do
Step I:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
Step II:
You can copy the contents from the custom.jsp that I’ve provided below to your custom.jsp.
Cutom.JSP File
<%@ page import="com.crystaldecisions.sdk.exception.SDKException" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.security.*"%>
<%@ page import="java.net.*"%>
<%@ page import="com.crystaldecisions.enterprise.*"%>
<%@ page import="com.crystaldecisions.sdk.plugin.admin.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="com.businessobjects.webutil.Encoder" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%
//BO Session and redirect to Infoview
IEnterpriseSession enterpriseSession;
/* * Set Enterprise Logon credentials. */
final String BO_CMS_NAME = "bi4server";
final String BO_AUTH_TYPE = "secEnterprise";
final String BO_USERNAME = "Daya";
final String BO_PASSWORD = "admin@123";
ILogonTokenMgr logonTokenMgr;
String defaultToken = "";
* Log onto Enterprise
boolean loggedIn = true;
try {
//Create session token
enterpriseSession = CrystalEnterprise.getSessionMgr().logon(Daya,admin@123, BI4SERVER,Enterprise);
logonTokenMgr = enterpriseSession.getLogonTokenMgr();
defaultToken = logonTokenMgr.createWCAToken("", 20, 1);
//Redirect with token attached to the ivsLogonToken parameter
response.sendRedirect("http://"+BO_CMS_NAME+":8080/BOE/portal/1205291547/InfoView/logon/start.do?ivsLogonToken="+Encoder.encodeURL(defaultToken));
catch (Exception error)
loggedIn = false;
out.println(error);
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
</body>
</html>
Edit the username,Password & BOBJ Server Name'in BOLD Letter
Step III:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Step IV:
Trusted Authentication:
Trusted Authentication is a component of Enterprise authentication that integrates with third-party single sign-on solutions, including Java Authentication and Authorization Service (JAAS). Applications
that have established trust with the Central Management Server can use Trusted Authentication to allow users to log on without providing their passwords.
This method is really cool because users don’t even have to know their passwords. Basically with this method you can log into another system and if that system has the appropriate user name, you can pass it to the custom.jsp and then it will log you into BI Launchpad.
In addition, you don’t need to create any java code for the enterprise token setup.
Step V:
In the CMC, go to Authentication, then select Enterprise. Check Trusted Authentication is enabled, then click on New Shared Secret. Finally download the shared secret key and keep it somewhere secure
Step VI:
Copy global.properties from <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\default into <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\custom. Then using Notepad or another text editing utility, edit the following properties
sso.enabled=true
trusted.auth.user.retrieval=WEB_SESSION
trusted.auth.user.param=UserName
trusted.auth.shared.secret=<secret code from properties file you created in step 2>
Step VII:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
<\!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page language="java" contentType="text/html;charset=utf-8" %>
<%
//custom Java code
request.getSession().setAttribute("MySecret","32efbfbd35efbfbdefbfbd4363efbfbdefbfbd694aefbfbdefbfbd227530efbfbd5742efbfbd13efbfbd2befbfbd1fefbfbdefbfbdefbfbdefbfbd4e49efbfbd41550cefbfbd15703619d8b8efbfbd6cefbfbdefbfbd57efbfbd0defbfbdefbfbdefbfbd0605efbfbd6dc59b2728efbfbd");
request.getSession().setAttribute("UserName", "Daya");
%>
<html>
<head>
<title>Custom Entry Point</title>
<script type="text/javascript">
function goToLogonPage() {
window.location = "logon.jsp";
</script>
</head>
<body>
<a href="javascript:goToLogonPage()">Click this to go to the logon page of BI launch pad</a>
</body>
Edit the username(Daya) variable
Step VIII:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Hope this help you as well.
Thanks,
Daya -
Using URL Reporting to open latest report instance
I know that there are two methods of opening reports in Business Objects Enterprise 3.1:
1) URL reporting
2) opendocument
I like URL reporting as you can embed the user name and password within the URL.
I was able to get URL reporting to work to look view a report on demand.
Request
I would like to be able to open the latest instance of a report using URL reporting, not using opendocument, as I want the user to be able to open the latest instance without logging in.There is nothing written with both TA and opendocument. I just noticed the forum posts wanting to use the old viewreport and thought this was a better solution. If on XIR2 then setting up TA will affect infoview users and generate errors (for not TA users) but on XI 3.x it would only affect opendocument users. If no username were provided in the URL then you may see an error (I don't recall seeing errors on 3.x). This could be easily resolved on XIR2 by having 2 instances of the web/app on different ports (one with TA enabled and one without).
As there have been multiple inquiries on this topic I just wrote up a new trusted auth note for setting up QUERY_STRING (requires SMP login to look up and view)
1422248 - Setting up Trusted Authentication in XI 3.x for opendocument infoview using QUERY_STRING
Regards,
Tim -
How to open new window webi report using open doc?
Hi All,
i have created URL using open doc in Bi 4.0 .please find the below my code.
http://fcvws975/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AeX5DoctKBhGv1AiV2oibxU&sIDType=CUID&sType=BI
workspace&sRefresh=Y" title="" target="_blank" nav="doc"></a>
When i click on this hyper link it is opening in the same page not in new window but i want to see report in new separate window.
Can any one please help .
Thank you,
Regards,
VenkatHi,
In BI4.1 SP03, there are couple openDocument fixes related to workspace.
ADAPT01700442
Description:
When using an Opendocument URL to open a BI workspace, a timeout error occurs resulting in an HTTP 500 error
message that reads: "Your session has expired".
New Behavior:
This problem is resolved.
ADAPT01711393
Description:
In Internet Explorer 8, if you attempt to view an Analysis workspace embedded in the SAP NetWeaver Portal using
OpenDocument, the workspace will fail to load.
New Behavior:
This problem is resolved.
What version of BI4.0 do you have?
If the fixes above are related to your openDocument workspace issue, I'd suggest you to test it on a BI4.1 SP03 sandbox.
Hope this helps,
Jin-Chong -
Hi,
I pass some parameters by URL while changing my BSP pages. How can I hide them so that they would be not visible in browser?
Thanks in advance.Refer below link. It will solve your problem.
Hide url Parameters
<i>*Reward each useful answer</i>
Raja T -
Position of parameters of a report using a Logical Database
Hallo all,
Is there any way that I can make the parameters defined by me in a report to appear <b>before</b> the ones defined by the Logical Database it is using ?
I searched but I couldn't find something relevant.
I would like to avoid having to copy and modify the LDB program.
ThanksHere are a couple of things you can do:
1. Right-click on the subreport and select "Format Subreport...". Turn off the borders on the subreport.
2. Right-click on the subreport and select "Size and Position". Set the X and Y coordinates both to 0. This will place the subreport at the top-left of the section where it's located.
3. In the subreport, suppress ALL of the sections that you're not using.
4. Make the height of the subreport fairly small - it will expand to the size of the data it contains.
5. Put the column labels in the Page Header of the main report, using markers on the ruler to identify the placement of the left side of each column header. Be sure to line the markers up to a specific "tick mark" on the ruler.
6. In the subreport, place markers at the same tick-marks on the rule as you used for the column labels on the main report. Then align the fields in the subreport with the markers.
This should get you close to the format you're looking for. If it's not exact, you can look at the report in Preview and tweak the position of the column labels to match the data in the subreport.
-Dell -
All - We are currenlty using Bex and some of the reports that the users will be generating will exceed excel limit of 65k rows. I had suggested using web reports, but when the users run large reports they are timing out. The basis team changed the time out settings multiple times but they have been of no use. It is critical that the users are able to run these reports or atleast have them run by a BW team member. Is it possible to use open hub to run reports?
You can download the data of your data target into CSV (or other forms) using open hub.. this will be just a flat structure with the dump of all records for the specified selection...
In your case report may be timing out on web coz of user inactivity (idle)/ dialog time..ask your basis team to check that param..(sorry i could not remember the exact param name) -
Want to use "Open Document" PR link on customized form....
I developed customized form and register in ERP. Now, the requirement is to view Purchase requisition by click on button as Oracle provide in
"Notification Summary" => "Open Particular Notification"=> "Open Document"
then it load JInitiator or JRE and open Notification PR or PO..
Is it possible to use this option on customized form, if yes than how?
Edited by: user9092987 on Sep 25, 2010 4:15 AMgavy81 wrote:
>
quote:
Originally posted by:
K0rrupt
> First give your vote button a name. Then inclose it in a
<cfif>.
> For example....
>
> <cfif IsDefined "button_vote">
>
> Insert script here
>
> <cfelse>
>
> <form action="process_quickpoll.cfm" method="post"
name="Poll">
>
> <cfoutput query="Question" group="QuestionID">
> <input type="hidden" name="QuestionID"
value="#QuestionID#">
> </cfoutput>
> <input type="submit" name="button_vote"
value="Vote">
> </form>
>
> </cfif>
>
> You can make the popup window here:
>
>
http://www.dynamicdrive.com/dynamicindex8/popwin.htm[/q
>
>
> Thanks but what i should enter in the after <cfif
tag>
>
> insert code here
>
> should i use <cflocation tag> for this or what..
>
>
i think he means to replace the "Insert script here" with
actual code
for processing submitted info. you MUST give your submit
button a valid
NAME (as in name="somenameforyoursubmitbutton"), otherwise CF
will not
be able to see the button in the submitted form fields and
the <cfif
isdefined("form.somenameforyoursubmitbutton")> will not
work...
your code for processing form submission may include things
like
- storing submitted info in a db table
- performing calculations
- a multitude of other things
if in your popup window you want to show someting like
current vote
standings, then you will probably store the submitted vote in
a db or
some scoped variable, then calculate current vote standings,
and then
display that info in your popup. in that case you can just
add
target="_blank" inside the <form> tag to open the
action page in a popup.
Azadi Saryev
Sabai-dee.com
Vientiane, Laos
http://www.sabai-dee.com -
How can hide parameters in url (calling reports)
hi,
in portal i'm running reports.
report url is like this;
http://myportal/reports/rwservlet?report=report.rdf&p_userid='||v_userid||'&cmdkey=conn_ybs_1'
when antone calls report the userid parameter shown in url.
for example;
http://myportal/reports/rwservlet?report=report.rdf&p_userid='||65874||'&cmdkey=conn_ybs_1'
i don't want to show parameters value to users
how can hide this parameter in url?
thanks.in portlet i get userid
v_userid := wwctx_api.get_user;
and use v_userid the following portlet.
bq. <HTML> \\ <BODY> \\ <ORACLE>declare \\ p_authid varchar2(50); \\ p_personel_turu varchar2(1); \\ v_userid varchar2(10); \\ begin \\ p_authid := wwctx_api.get_user; \\ p_personel_turu := substr(p_authid,1,1); \\ v_userid := substr(p_authid, 2,8); \\ htp.p(' \\ <table border="0" width="100%" cellpadding="0" cellspacing="0"><tr>'); \\ if p_personel_turu = 'I' then \\ htp.p('<td width="100%" bgcolor="#7496ec" align="left">*{size:2}{color:#ffffcc} <img border="0" src="\img\resimler\bullet\bullet.gif" align="middle" width="19" height="19">{color}{size}{font:Verdana}{size:2}{color:#ffffcc}Dört Aylık Vizite Kağıdı{color}{size}{font}*</td> \\ </tr> \\ <tr> \\ <td width="100%" bgcolor="#ffffff">{font:Verdana}{size:1}{color:#006699} İşçi Personel Dört Aylık Vizite Kağıdı{color}{size}{font}'); \\ htp.anchor(curl=>'http://myportal/reports/rwservlet?report=report.rdf&p_userid='||v_userid||'&cmdkey=conn_ybs_1',ctext=>'*{font:Verdana}{size:1}tıklayın.{size}{font}*</td></tr><tr><td width="100%"> </td></tr><tr>',cattributes=>'target="_blank"'); \\ end if; \\ htp.p('</tr></table>'); \\ end; \\ </ORACLE> \\ </BODY> \\ </HTML> -
Is there anyway to hide the parameters that call a report?
Currently they show on the URL line and can be changed by the user.Hi,
If you call a form from the customization form then the values would be submitted otherwise they will appear in the url. The only way would be to is to use a html form with p_arg_names and p_arg_values and then make the report the action method for the form. I think you can make use of the customization form instead.
Thanks,
Sharmila -
Show/Hide tabs in a report using profiles
Hi,
There is a need to show hide/show tabs based on User Profile or any other method.
There are 1. Summary 2. Detailed Tab in report.
For data analysts client want to show Detailed tab so that Analysts can work on Analysis. Managers shoud be able to see only Summary tab.
This is required to reduce no of modificatiosn required for reprots. This helsp to avoid prolifiration of reports as well.
Pleas help on techniques/ tools to get this requirement at the earliest.
Regards,
Nanda Kishore BHi Nanda,
I do not think this functionality is currently available in WebI.
However you could break these report tabs into two different reports and using access privilges make these two reports available to the concerned team.
You can log a request at https://ideas.sap.com to directly work with the product group to check if this exact functinality could be included or not.
Hope this helps.
Regards,
Manpreet -
Drilldown with Open Document API
Hi
I am having a problem in BI. Please anyone help of solving this. The problem is like that:
I have a report with drilldown capabilities. Report is like that KPI Vs YEAR. Now after drilldown the report change to KPI Vs Month. Now Month has a hyperlink that switch the report to the another report (details record of that particular month). Now i want a add a feature something like this: from details records Is there any way to back to my master report with last status(KPI Vs Month). I have made a solution, from details report using Open document API i can switch to the master report but it has an initial stage like KPI Vs YEAR. But when i switched to the details report from master report, the master report has the stage like KPI Vs Month.
Thanks for giving any suggestion
ArifHi Arif,
I usually add the parameter sWindow=New to the URL that drills from the master to the detail report (i.e. in your example from Month and KPI to the new report). This makes the detail report open in a new window. The user gets back to his starting point (the monthly view) by simply closing the browser window of the detailed report.
Hope this helps, Martina -
Open doc URL: unable to open the report in same window
Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.GI have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos -
Using a Print Style Sheet to hide columns in a report
Hello there,
I am curious to know whether it is possible to hide certain columns in reports using a print style sheet.
I tried using the 'CSS Class' attribute when editing column formatting but it appears to be completely ignored and simply overwritten with the theme's default CSS Class for a report table cell (t15data in my case).
Any help would be greatly appreciated...
Cheers,
JordanHi Jordan,
Perhaps the simplest thing would be to change your page template (or, more probably, take a copy of the one you are using and edit that instead).
Add id="#COLUMN_HEADER_NAME#" into the TH and TD tags for the Column Heading Template and all of the Column Templates.
Then, in the Region Header of the region containing the report (or anywhere above the region), enter in:
<style type="text/css" media="print">
#ID_OF_COLUMN_TO_HIDE {display:none}
>/style>
I have not tested this to see if it impacts on any other page functionality, but it does do what you need - ie, the column appears on screen but not on a printout.
Regards
Andy -
How to open documents programatically within current Workspace session
I'm using Hyperion 9.3.1 across the board and I've built both Interactive Reporting and Web Analysis documents. Within those documents I have links/controls to open other Interactive Reporting documents.
From Interactive Reporting, I have two options, create a Hyperlink shape, or a Command button control and use OpenURL. Both create new sessions of Workspace when they open the documents.
From Web Analysis, you can not use Open Document to open Interactive Reporting (only works for other Web Analysis documents), so I have to use the service that opens a link, which again creates a new session in Workspace.
I would like to have my reports all open within the same Workspace session and have the nice tabs in the bottom of Workspace appear that shows all the open documents (which is the default behavior when you double click documents in Workspace explorer).
Any ideas?For Interactive Reporting, I found information on how to do this. Page 22 in ir_developer-vol1.pdf. Here's a snippet of the documentation:
* New Window—A pop-up window is created every time the hyperlink is clicked. This option,
which is the default, maps to the OpenURL OM method "_blank" target.
* Current Window—If the execution application is Interactive Reporting Web Client or
Workspace, the content replaces the Workspace content area (for example, excluding the
surrounding browse application panes). In Interactive Reporting Studio, a pop-up window
is displayed.
* Top Window—If the execution application is Interactive Reporting Web Client or
Workspace, the content replaces the top HTML window. This option maps to the OpenURL
OM methods "_top" target.
& Named Window—A named pop-up window is created. If a named window is currently
displayed, the URL replaces the content of the current window. When this option is selected,
the user can enter the new window name in the Target window text box that is displayed
below the drop-down list. This option maps to the user-specified, target-name option of the
OpenURL method.
I'm pretty sure I tried all of these possible targets in the Hyperlink properties window, but perhaps I didn't. Oh well...I'll see if it works.
Maybe you are looking for
-
How to set the First Line of Table UI in Web Dynpro ABAP
Hi Team, I have a scenario where I'm displaying two Table controls one below the other. When a line is selected in the first(Top) table, I have a supply function(Event) and I fill the second(bottom) table. Everything works fine till here. The problem
-
Why do some songs and videos stop playing or freeze while playing?
I have an 80 gig iPod classic that I never had problems with until now. I started noticing songs and videos I bought from iTunes aren't working. They will play for 30 seconds, stop, and go to the next song. I called iTunes, and they told me to use th
-
firefox 3.6.10 up todate iapp mac os10 and on windows xp
-
Hi, I have a E65 telephone which I bought off ebay. I believe its a chineese version. My wife bought a E65 from Thailand. Both phones work reasonably well, but one thing I have noticed is the fonts on mine look very ugly - I believe they are not alia
-
How do i update app from latests itunes?
How do I update apps from I tunes in the computer? The phone tellls me iI need to connect to I Tunes but There is no way to update apps from this latest I tunes. Thanks! Jose