Hide picture on panel

Hello.
I'm using Labview 8.5.1.
With my VI I want to make a PNG-Picture appear and disappear on demand. I use radiobuttons to show/hide different pictures. The picture to appear/disappear has a transparent background, so that one can see what picture(s) is(are) underneath. There's a permanent picture on the panel that always has to be visible.
I wasn't able to create a property node for a picture posted on the panel and the picture ring didn't work either.
I hope you can help me.
Solved!
Go to Solution.

Why don't you use picture box? You have vis available to access .PNG files. In this way you can change pictures at runtime.
You will find these vis in Programming>>Graphic&sound>>graphics formats
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Similar Messages

How do I hide the "preview panel" in Mail. Double clicking the "separator bar" hasn't worked ( I think I know where that bar is.)

How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.

Maggie 6 wrote:
How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.
The only way I found to hide the "preview panel" is to drag the separator to the edge of the window. It shrinks the panel down to perhaps 1/2 inch in height and then disappears only when you drag it to the bottom (classic layout) or perhaps a couple inches wide (in the new layout). It is also annoying to me that you can double click to open the preview panel but you cannot repeat that to hide it. [sigh]
I submitted feedback about the help file as well - you may want to do the same. I could not find the double click mentioned in the new "Mail Help" - I know it was in the old version.

Conditionally hide details preview panel in worklist

Hi,
I have an issue to conditionally hide details preview panel in worklist app.
We have some human tasks, which are quite complex and it's impossible to complete them in preview panel.
I know there is a way to disable this preview panel utterly, but I wouldn't like to throw the baby out with the bathwater and limit worklist for future applications.
Any ideas? :)
thanks,
Krzysztof Polak
PS. I am using SOA/BPM 11g.

Navin had a post on this a while back that might help you - How to Customize home page of Oracle BPM Worklist Look at the bottom of the thread where the showTaskDetailsPanel property is set to false.
Dan

I want to remove or hide the Details Panel. when using OpenDoc.

Hello I'm Yong ho Park.
I recently had hard time because of Details Panel.
I want to remove or hide the Details Panel. when using OpenDoc(Dashboard file).
My system's version is BI 4.1 SP02.
Is your problem solved??
If your problem isn't solved, I want to be offered related formation.
I need your help. !!

Hi,
you cant hide the Details Panel. This behaviour is By Design.
http://service.sap.com/sap/support/notes/2021076
Regards
-Seb.

[Shortcuts] Hide/Show standart panel

Hello.
Default in Dreamweaver used Ctrl+Shift shortcut for Hide/Show
standart panel.
But I use this shortcut for the keyboard layout switching.
And I need standart panel.
So when I press Ctrl+Shift for swith keyboard layout standart
panel hidding.
How can I change this setting?
I can't found setting for this shortcut in Edit->Keyboard
Shortcuts...
With toolbars.xml the same result.
Please help me to decide this problem, becouse I have
discomfort.

Please help me to decide this problem, or say that it's
unsoluble.

Can you hide pictures?

I would like to hide some pictures in my aperture library. How can I do this?

The best you could do is to place the images you want to hide in a separate library.
If you want to hide this secret, separate library completely, give it a name that starts with a dot, like ".secret.aplibrary", Aperture will warn you that the name should not start with a dot. Just ignore the warning and proceed. However, since you will not be able to see this library in the Finder, you can only open it from the Terminal.
Lets assume, you have a secret Library located in your Pictures Folder.
Open Applications/Utilities/Terminal
type:
cd Pictures
open -a Aperture .secret.aplibrary
Then you can admire your secret pictures. To switch back to your regular library use the menu File > switch to library
and when you are back to your standard library click
File > clear menu
to all traces.
To see your hidden files listed in the terminal window, just type "ls -a".
To rename the secret library, use the "mv"-command:
mv .secret.aplibrary nolongersecret.aplibrary
Make sure you remember the exact name and path to your secret library - spotlight wan't show it,
perhaps you could create an innocent looking alias to your secret file, while the file is still visible and before you hide it.

Hide/Show a Panel group or Panel Box with a command link

I need to show and hide a panel group/box that has a lot of components inside ..with a command link ...I need to do this with partial submit ....please advise.
<af:commandLink >
hide the panel box with all the comps inside it ..change commandlink text ....
use the same command link to show the panel box and change the command link
text back
</af:commandLink>
<af:panelGroup layout="vertical">
<af:panelBox>
<af:panelGroup>
ALOT of components .......
</af:panelGroup>
</af:panelBox>
</af:panelGroup>
I tried with partial trigger ..I tried everything i know ..it did not work .....it only worked I do a I full submit and setting some processScope(session) variables ..
Thanks.

Hi,
- have a managed bean in session scope
- define a boolean variable that is set to true
- expose the variable through a public method
- use EL on the panelBox rendered property to link to this boolean method
- define an action listener on the command link and set the autosubmit property to true
- use the action listener to set the boolean value
- define a value for the ID property of the command link
- set the ID vaule to the PartialTrigger property of the panelGroup component
Frank

How To Auto Hide the Icon Panels in Photoshop CS6?

I did go to the preferences and changed the icon panel to hide but it does not work... I also did what is suggested and exited the program to activate any changes and it still does not work. I've seen folks who produce tuts with this feature so I know its possible.
Thanks....

So you saying if you have the preference Auto-Collapse Iconic Panels checked and have a panel expanded from the collasped panels that
clicking somewhere in the document area doesn't collaspe the panel back to an icon?

When i use firefox with mafia wars none of the pictures display - i think i hit a hide picture button?

using mafia wars, it does not show any of the pictures only the words so it makes it difficult to know where to click. mafia works fine when i open in chrome - so it is something i did while using firefox.

With the site on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [https://support.mozilla.com/kb/Images+or+animations+do+not+show].
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

Portal 7.0 Hide Links on Panel

Hello experts,
I'd like to know how I can hide the links on Panel of Portal 7.0
I know the propriety of iView for close the Panel:
Initial State of Navigation Panel == CLOSE
But in my case I just want to hide the links.
Take a look the image bellow for you understand this better:
http://img833.imageshack.us/img833/6686/helpportal.jpg
Cheers,
[]´

Firstly, Thanks everyone for the attention !!
I tried to do this.. but this did not work!!
When I set the property Invisible in Navigation Areas on the iView, then whole page goes empty !!
The iView is like than:
[http://img231.imageshack.us/img231/7168/helpportal10.png]
I'd like to do something like this:
[http://img709.imageshack.us/img709/5694/helpportal11.jpg]
Edited by: Tulio Vargas on Aug 16, 2010 4:53 PM
Edited by: Tulio Vargas on Aug 16, 2010 4:55 PM

Hide actions from panel

Hi,
I have a batch of actions which are called from other actions and I would like a way to hide these from showing in the panel.
Cheers
Kenny

You can collapse actions sets to hide the actions within so navigating the Action palette is easier. Its not possible to hide individual actions within actions and action sets can not be nested. Navigating the Action palette can be tedious. However it much easier than navigating scripts. If you have a large collections of scripts. Photoshop menu File>Scripts>Large Script List... Photoshop only scroll that large list a single item at a time. So one wind up adding even more actions that use scripts into the Action Palette crowing the Actions palette further. For the Action palette is easier to navigate the scripts.

HIDE / SHOW active panels

hallo another tweak to my tiny script...
I know its a little foolish to be tweaking such a little nonsense script BUT hey everybody has to start somewhere and THAT'S what a forum is about :)
I got this problem:
Iam trying to hide all panels i have currentlly visible and later show them again as they were before... i can do it in two separate scripts (scriptHIDE, scriptSHOW) thats fine with me...
i just need to script an exact functionality of pressing TAB key (show/hide panels)
when i use "app.panels.everyItem().visible = false" all the panels dissapear BUT there is no way to show them back :) they are gone
when i in contrary use "app.panels.everyItem().visible = true" InDesign shows EVERY panel possible...
isnt there some smarter and cleaner way to toggle ON / OFF panels but only those which are currentlly visible (including Tools and Control)...

Hi Rosta,
My idea is to save "visible" property of every panel in an array, and then after making every panel invisible you can restore the visible state of the panels:
// remember which panels visible and invisible in array
var arr = app.panels.everyItem().visible;
// make every panel invisible
app.panels.everyItem().visible = false;
// restore settings from the array
for (i=app.panels.length -1; i>=0; i--){
app.panels[i].visible = arr[i];
Kasyan

DOES I PHOTO ALWAYS HIDE PICTURES IN THE SD CARD AFTER YOU IMPORT THEM?

How do i do to make i photo NOT hide the pictures i've already imported from my SD card? i haven't erased them from the SD card, and i want to import them again to my external drive for space issues. BTW, how do i do this?
i' got several issues with i photo. i HAVE to use it, cause throuh the finder i don't see all the pictures from the sd card. some of them just don't show up. has this happened to anyone else? so i have to use i photo to import my pictures from my sd card everytime. i used to be a pc user, but i pretty much know my way around my mac book pro.
it's a retina, the smallest space one (256 gigas) and i take so many pictures (that's my job) it's almost full. i bought it knowing i would import all the pictures into an external hard drive, but didn't initially and now i don't know how to change the hard drive where the pictures are imported.
plus the pictures i've already imported from my sd card keep on not showing in the sd card through i photo. i still have all the original pictures in several sd cards cause i wanna import the ones i've already imported since i bought my mac book pro into my mac book pro, this time into my external hard drive. but i'm afraid they will keep on not showing in the sd card through i photo when i do it. i hope i'm making sense.
can anyone help me? thanks,
john.

thank you Old Toad. i already tried this, and it doesn't work for me, cause for some reason the finder won't show all the pictures that i took. i photo shows them ALL. i don't particularly like this application (i'd rather use the finder as i used to with PC) but i think i have to use it because of this.
Does anybody get my problem? has anybody else had this problem happen to them?
is there any way i photo show again the pictures in the sd card that i've already imported?
i just put the sd card in the sd slot in my mac book pro off course.
thanks
john

Hide DW Search Panel

Is there any way to permanently hide the search results
panel? It pops up after and find or search and replace. The window
takes up too much screen space on a laptop and takes the window
focus.
I've been using DW for 5 years and don't see how to do this
in the config files. Thanks for your help!!!

nicknickoli wrote:
> Is there any way to permanently hide the search results
panel?
No. Pressing F7 minimizes it. Another thing you can try is
detaching the
Results panel from the rest of the panel group and floating
it. It still
opens, but pressing F7 closes it completely - at least that's
how it
works in the CS4 beta.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Is possible hide the front panel of a vi that launch other vi?

We have a vi that launchs other vi( modal subvi, that shows his front panel).
But while is running this subvi, I want to "hide" the vi, and when the subvi finish we want to show the vi's front panel.
How can we do it? I check property node /Invoke node functions, but I don't find any good solution!
Any idea?
Best regards,
Graci

Here is a vi that does exactly what you are asking for.
Sorry for the french comments... It should not be to difficult to understand the code.
You must call this vi twice in the subvi.
1) With the input set to "Masquer" (--> hide) at the beginning of the execution of the subvi.
2) With the input set to "Afficher" (--> show) at the end of the execution of the subvi.
Attachments:
Afficher et cacher face avant.vi ‏35 KB

Hide picture on panel

Similar Messages

Maybe you are looking for