Conditionally hide details preview panel in worklist

Hi,
I have an issue to conditionally hide details preview panel in worklist app.
We have some human tasks, which are quite complex and it's impossible to complete them in preview panel.
I know there is a way to disable this preview panel utterly, but I wouldn't like to throw the baby out with the bathwater and limit worklist for future applications.
Any ideas? :)
thanks,
Krzysztof Polak
PS. I am using SOA/BPM 11g.

Navin had a post on this a while back that might help you - How to Customize home page of Oracle BPM Worklist Look at the bottom of the thread where the showTaskDetailsPanel property is set to false.
Dan

Similar Messages

How do I hide the "preview panel" in Mail. Double clicking the "separator bar" hasn't worked ( I think I know where that bar is.)

How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.

Maggie 6 wrote:
How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.
The only way I found to hide the "preview panel" is to drag the separator to the edge of the window. It shrinks the panel down to perhaps 1/2 inch in height and then disappears only when you drag it to the bottom (classic layout) or perhaps a couple inches wide (in the new layout). It is also annoying to me that you can double click to open the preview panel but you cannot repeat that to hide it. [sigh]
I submitted feedback about the help file as well - you may want to do the same. I could not find the double click mentioned in the new "Mail Help" - I know it was in the old version.

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

How to hide the preview section in the crystal report viewer activex cntrl.

Dear All,
I am using the Crystal report viewer ActiveX to display the Crystal report. When the report opens in the Crystal report viewer ActiveX control, a preview section comes at the left hand side of the panel. How can I hide the preview section from the Report viewer control.Is it possible to customize the the report viewer control. Awaiting for your suggestions.
Thank you.
Regards,
Rahaneef

Just to get the terminology correct. I believe you are meaning the Group Tree(?).
Vb Code:
CrystalActiveXReportViewer1.DisplayGroupTree = False.
Also, do consult the developer help file;
C:\Program Files\Business Objects\Crystal Reports 11.5\Help\en\rdcsdk_com_dg_doc\doc\rdcsdk_com_dg.chm
Ludek

Preview panel not working

Can't view video in preview panel in Premiere Elements 9

Finley
Could you give more details?
What computer operating system is your Premiere Elements 9 running on? Are you working from the 9.0.1 Update of the program?
What are you doing
a. Double clicking the thumbnail in project media, getting the Preview Window with a blank screen
b. Double clicking the file on the Timeline, getting the Preview Window with a blank screen
c. Other
What are the properties of your source media on the Timeline and was is your project preset?
Is this a "it worked before but not now" or "it never worked before" issue?
If you open a new project, do you have the same problem? Is the problem confined to one particular file or to any Timeline content that you try to view in the Preview Window?
Although you are having these problems in the Preview Windows, are you having any problems playing back your Timeline content in the Edit Mode monitor? Are you getting any display card error messages or any error messages at all associated with this problem?
Please check out the above and then we will move forward with the troubleshooting based on your answers.
Please do not hesitate to ask if you need clarification on anything that I have written.
Thanks.
ATR
Add On...I did not see SG's post until after I had posted mine.

Preview panel in Premiere Elements 10 stopped working

Hi
The preview panel on Adobe Premiere Elements 10 has stopped working.
It was working fine until a couiple of weeks ago. I'd created a film and rendered it OK but after watching decided to do a little more editing.
When I opened up the project the preview panel was just grey/blank. I move the cursor over a piece of film and just got like a snap shot.
I can hear the soundtrack but no picture.
I have tried a few suggestions from various sources as follows.
I've updated the video/display drivers (directly from the manufacturers website)
I've updated Windows for all the latest updates.
I've updated all the video players and codecs I could find on my PC.
I've updated Java.
I've done a cleanup and defrag but there is about 650 gb of freespace.
I've deleted the Bad Drivers file on a few occasions, this did give me a stuttering playback in the preview panel briefly but that has stopped again.
If I open a different window over the top of Premiere, part of that image stays in the preview panel when I close or minimise that window.
The video files I have been using have been mostly AVCHD files but these have worked fine for the last 18 months when I first installed this program.
I've tried converting files to AVI, MPEG, MPEG2, WMV etc but still nothing in the preview panel.
Totally stuck now, I've been trying to find a solution now for over a week and need to do some more editing.
I liked this program as an editor up until now but it maybe time to look for an alternative if I can't get a solution.
Kind regards and thanks in advance for any other suggestions
Steve

upholsteryteacher
That was good news that you have Premiere Elements 10 and Intel video card and not NVIDIA. To date, a certain display issue has been specific to the Premiere Elements 10 user whose computer uses a NVIDIA video card.
I think it best if you started your own thread on your display issue since your details can take us in an assortment of directions depending on the details.
We need to determine that your Mobile Intel 945 Express Chipset Family display card driver is up to date.
That information might be obtained from the following Intel web site
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics&Product Line=Laptop+graphics+drivers&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Famil y
or
This information might be obtained from the HP web site.
2. If you determine that your video card driver is up to date, then you can try deleting the Premiere Elements 10 BadDrivers.txt file. Once you have deleted it and opened a new project, the BadDrivers.txt file will be replaced with a new one. For that we would need to know what computer operating system your computer is running on so that we can give you the correct path to the BadDrivers.txt file.
It is important that at the onset you do a mini test run export to determine if what you are seeing as display problem in Edit is reflected in your export.
We will be watching for further developments. Details are important. If you have problems finding the details, we will help you with that.
Thanks.
ATR

My preview panel in lightroom book module has no "create save book button". Where is it?

My preview panel in lightroom book module has no "create save book button". Where is it? Is there a workaround to save my book?

The \ key will hide and show the header bar in the book module and the Create Saved Book button is at the right of that header bar.
The outlined area is what shows and hides when the \ key is pressed. Maybe you have a keyboard that has a different key for \? On my keyboard the \ key is just above the Enter key.
You can also use the View / Show Header Bar in the LR menus across the top:
If this doesn't work, then can you provide a screenshot of your LR book module?

Conditionally hide subtotal row

I am creating a new analysis where I want to conditionally hide a subtotal row in a pivot table view. I have two columns - Is Consolidated and Property Name. Properties can be consolidated or not so I have Is Consolidated as an attribute (values True or False) and I add both to an pivot table view of an analysis. I made Is Consolidated so that it has subtotals after and then hide the Is Consolidated column so that the pivot table view looks like so:
Property A
Property B
Property C
True Total
Property D
Property E
False Total
Grand Total
However, I want the report to look like so (don't show the False Total line):
Property A
Property B
Property C
True Total
Property D
Property E
Grand Total
I found the following - http://gerardnico.com/wiki/dat/obiee/answer_xml but my situation is a little different and when I pull the equation out it never finds it so it doesn't ever apply the conditional formatting.
Is this possible?

950121 wrote:
I don't understand what you're proposing. With this implementation I get the error "Numbers of columns and their data types must be consistent across all criteria and Result Columns".Most detailed steps I could write :)
1) Login in OBIEE analytics.
2) Create a new analysis/answers using the subject area that the report should be built out of.
3) In the criteria tab for the Report 1, drag the following columns: Property Column, and Fact Metric.
4) For the fact metric column, click on FX and write the following formulae: FILTER(Metric using Flag = 'TRUE')
5) Create all the filters as you need for this based on the prompts provided on the dashboard page
Time to create second report to display the subtotal:
6) Click on combine with similar request and select the same subject area and this will create second line of reports below the result columns.
7) The concept here is, you can do an union of reports as long as all the reports have same set of columns and matching datatype's.
8) Now select any column from subject area that is of type character, and obviously the second column which is the metric.
9) Click on Fx on the first column and change it to 'Total' to hardcode it. Change the fx of the second column to FILTER(METRIC USING FLAG = 'TRUE')
Time to create third report:
10) Click on edit, and click on Add new criteria to add third line of report in the result columns set.
11) Now repeat the steps in the first report, and change the metric to filter by 'FALSE' instead of true.
12) Apply the same set of prompts across 2 and 3 reports also.
Apply the formatting on the result columns per your requirement.
Thanks.

Detailed Navigation Panel in AFP

Hello Everyone:
       I created a workset , in this workset ther are some folders and pages, then I add this workset to a role,when our users preview this role,they found the page which be added into the workset is very odd in DLN.
       Firstly In the Detailed Navigation Panel ,the last page name is not display whole.
      Secondly ,if I expand some folder to dispaly the below page ,the last page is disappear solwly, until clear away completely.
      If I use Default Framework Page or Classic Framework Page ,everything is ok,I am very at o loss.
    So please someone can help me.
   Thanks a lot
   Lexian
Best Regards
Edited by: le xian on Dec 1, 2011 11:07 AM

Dear Arun Jaiswal :
       I think you don't know what my mean.
      Now our EP systmen has been upgraded into 7.3 release,so we use Ajax Framework Page.
    If you are using SAP portal in external facing portal (internet) then might be detailed navigation not work properly
     I use in my company,so it is not external problem.
     sorry
    lexian

Master-detail report, hide detail on new search

Hi, I'm newbie, so I need help. I have Master-detail report on same page. Master is interactive report, detail is SQL report which use hidden item as condition.
For display detail data I use edit link. But I have problem when I make new search on master, detail still shows the old data.
Can somebody tell me, how can I hide details , when I make new search on master? Or set hidden item to null, when I make new search?
Example you can see in http://htmldb.oracle.com/pls/otn/f?p=51834:4 . Login : demo/demo
Thanks
Igor
PS: Sorry on my broken English

Hi,
This can be achieved by doing something like the following:
Have a single SQL statement that joins the two tables together. eg,
select p.project_title,
d.project_detail1,
d.project_detail2,
etc
from projects p
inner join details d on d.project_id = p.project_id
This will provide a flat table with the project title in the first column for all records.
Then, in the Report Attributes, you need to switch on Column Breaks:
In the Break Formatting section, set Breaks to "First Column"
In the When displaying a break column use this format, enter #project_title#
In the Identify how you would like your breaks to be displayed, select "Repeat headings on break"
Finally, clear the "Show" tick for the project_title column
There's probably something you could do to improve formatting etc, but this should give you a start.
Regards
Andy

HFR Conditionally Hide Row

Is there a way in HFR 9.3.1 to conditionally hide a row. I know I can suprress the zero values but I want the row hidden when it is zero or missing. Seems I ran across this once but cannot find a way to do it now.
Details:
I have 3 scenarios (Budget, Target, and Prior Year) that I compare to Actual data like this:
Actual Total 100
Target Total 75
Var 25
Var % 33
The issue is many members do not have a Target value. So when the user selects Target I have 3 useless lines. I would like to hide the lines when Target or Budget is chosen for particular members.

Select the row you wish to hide, then in the property sheet (right hand side, hit F4 if it's not showing)
Then select the checkbox Advanced Options in the Suppression section.
Hit the Setup button next, here you can suppress: not sure how best to do it but you could do:
- if member name matches or
- row contains Missing etc
Cheers, Iain

Hide detailed navigation and Portal favorites windows for some roles?

Hi ,
We want to hide Detailed Navigation Area and Portal favorites area for some specific roles.
Thanks & Regards,
Subba Rao

Hi,
1. You have to create a seperate desktop.
2. Inside the desktop, the framework which you are assigning will contain Desktop innerpage, Masthead and Top level navigation page.
3. You need to copy the desktop inner page and paste with different name (since it is a standard page)
4. Now open the custom desktop inner page and remove the iviews what ever you dont want.
5. So now your framework page will not have the detailed navigation anymore.
6. Then we need to set master rule collection to load this desktop for a specific role using if... then condition.
Finally the role will have only which ever the iviews you have selected in desktop inner page.
Thanks,
Mahendran B.

Bridge CS6 - Preview Panel Zoom level

Greetings-
In using Adobe Bridge CS6 (w/latest updates as of 06/13/2014), when previewing video files, the preview panel will automatically zoom into the video. I've tried resetting the preferences (Holding down control while starting), resetting the workspaces - this has not worked.
I saw in another thread where the author mentioned a "zoom toolbar" but this only refers to the thumbnail panel - NOT the preview panel.

I'm running Bridge CS6 64bit
I'm sorry, am a Mac user and rarely use movies. Although a .MOV file shows without problems in my preview window. And your screenshot only shows part of the workspace, maybe try again with the whole screen and the preview window filled with zoom?
Try another workspace and even try to reset preferences again, sometimes it needs more then once to solve a problem. And Windows is very critical for the use of correct graphic card drivers but that is out my league I'm afraid.

Changing preview panel transparency background in Adobe Bridge CC

Can the background color showing transparency in the Adobe Bridge CC preview panel be changed from the default black to white?

Thank you GCRayaPC - I tried again after your positive response but realized I copied the wrong file into the Extensions folder. Doh!
Glad I wasn't more nasty when I posted (already red-faced).
THX
Joanne

Empty Preview Panel in Bridge

I've opened Bridge and selected a thumbnail in the content browser, but no image appears in the preview panel. I'm assuming it's because my processor is less than the recommended ones (Pentium 4, etc. - I get a message that Bridge may perform poorly when opening Bridge). However, I thought I'd check here just in case there may be another reason. Would the processor be the most likely culprit or is there something else I should check? My processor is an AMD Athlon XP 1.67 GHZ.
Thanks...

What works for some of us is to click "restore down" icon (upper right middle one). If your window is in maximize mode the preview is there, just buried under dozens of layers, but have to pull back window pane border to see it.

Conditionally hide details preview panel in worklist

Similar Messages

Maybe you are looking for