Hierarchial Layout Saving with function modules

Hai to all
i am facing a problem while saving layout in Hierarchial list display with function module.
below error message is coming when i am going save my layout.
210     if l_def_variant-variant eq rs_variant-variant.
211       l_default = 'X'.
212     endif.
213   endif.
214
215   call function 'LT_FC_SAVE'
216        exporting
217 *           I_TOOL            = 'LT'
218             i_tabname         = r_tabname
219             i_tabname_slave   = r_tabname_slave
220             is_variant        = rs_variant
221             it_fieldcat       = rt_fieldcat[]
222             it_sort           = rt_sort[]
223             it_filter         = rt_filter[]
224             is_layout         = rs_layout
225             i_default_variant = l_default
226        exceptions
227             fc_not_complete = 1
228             others          = 2.
229   case sy-subrc.
230     when '0'.
231       message s018(0k).
232     when '1'.
>>>>>       message x000(0k) with 'LT_FC_SAVE' sy-subrc
234               raising fc_not_complete.
235   endcase.
it is very urgent...
Subhash.M

data: ls_vari      type disvariant.
DATA: w_repid      TYPE sy-repid.
ls_vari-report      = w_repid.
ls_vari-username    = sy-uname.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK              = ' '
     i_callback_program             = w_repid
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
     is_layout                      = wa_layout
      it_fieldcat                    = i_fcat[]
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
   it_sort                        = i_sort[]
IT_FILTER                      =
IS_SEL_HIDE                    =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
     i_default                      = 'X'
     i_save                         = 'X'
   IS_VARIANT                     = ls_vari
   it_events                      = i_event[]
IT_EVENT_EXIT                  =
      i_tabname_header               = 'I_FINAL1'
      i_tabname_item                 = 'I_FINAL2'
I_STRUCTURE_NAME_HEADER        =
I_STRUCTURE_NAME_ITEM          =
      is_keyinfo                     = wa_key
IS_PRINT                       =
IS_REPREP_ID                   =
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                =
IR_SALV_HIERSEQ_ADAPTER        =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      t_outtab_header                = i_final1
      t_outtab_item                  = i_final2
EXCEPTIONS
   PROGRAM_ERROR                  = 1
   OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
i have passed the parameters
but i am getting same dump again..
Subhash.M

Similar Messages

To update Employee Data with Function module

Hi
CRM employee master and HR employee master need to be mapped
for the labor cost posting function to work.
In BP transaction (Change in BP role : Employee),
I could update "Personnel number" and "User Name"
under Identification Tab
now I need to do same job with Function module in report program.
Anybody knows that what Function module should I use ?
I tryed to do it with Function "CRMXIF_PARTNER_SAVE"
but I only succesed to update imformations under Adress tab in BP transaction.
thank you.

Use FM BAPI_BUPA_CREATE_FROM_DATA.
Rg,
Harshit

How to copy a generic extractor with function module into a new system?

Dear Gurus,
i would like to know how i can copy a gneric datasource with function module from one system to the target system.
Thank you
Cheers

Hi Anesh,
thank you for replying.
Since the Datasource will have a new new in the new system, i will create a new one.
Create a generic datasource base on the table is not the problem.
My problem is how could i copy the FM in the new system?
If you can help me on that, it will be fine.
Thanks

VirtualProvider with Function Module

Hi,Experts
Can anyone tell me how to create a VirtualProvider with Function Module?
I have read the How to guide"How to Implement a VirtualProvider with service",but I can't go throw the source code.
Please give me a sample test code of yours!
Thanks a lot!
My Email:[email protected]

Hi Jin
This question does not belong to this forum, close it and post it in the appropriate one.
Also, please remove your email address from the thread as it violates the forum guidelines.

Generic Data Source with Function Module data mismatch in BI

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

the datasource frame work starts the function module several times.
1. the initialization
2. the serval times, until you "raise no_more_data".
check you coding: have you refreshed necessary internal tables.
Sven

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

VirtualProvider with Function module problem !

I implemented virtualprovider with function module. Unfortunately when I run query i get message error :
u201CFunction call of ZT0X failed; the obligatory parameter CHARACTERISTICS
An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was
I>> Row: 67 Inc: READ_DATA Prog: CL_RSDRV_VPROV_LOC_NOSIDu201D
Any suggestions ?
Below source code:
u201CFUNCTION ZT0X.
""Lokalny interfejs:
*" IMPORTING
*"     VALUE(INFOCUBE) LIKE BAPI6200-INFOCUBE DEFAULT 'ZT03'
*"     VALUE(KEYDATE) LIKE BAPI6200-KEYDATE OPTIONAL
*" EXPORTING
*"     VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*"      SELECTION STRUCTURE BAPI6200SL
*"      CHARACTERISTICS STRUCTURE BAPI6200FD
*"      KEYFIGURES STRUCTURE BAPI6200FD
*"      DATA STRUCTURE BAPI6100DA
DATA:
    l_r_srv              TYPE ref to CL_RSDRV_REMOTE_IPROV_SRV,
    l_th_mapping         TYPE CL_RSDRV_REMOTE_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
* break-point ID ZRSDRV_RC1.
* break DEVELOPER.
perform build_mapping_table
    changing l_th_mapping.
create object l_r_srv
    exporting
      i_tablnm              = '/BIC/PZPRD_ID'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
ENDFUNCTION.
&---- <
*&        Form build_mapping_table
&---- <
Form build_mapping_table
changing
    c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = 'ZPRD_ID'.
l_s_map-fldnm = '/BIC/ZPRD_ID'.
insert l_s_map into table c_th_mapping.
l_s_map-iobjnm = 'ZWARTOSC'.
l_s_map-fldnm = '/BIC/Z_CEN_W'.
insert l_s_map into table c_th_mapping.
+endform.u201D

Hello
I experienced the same issue. Were u able to solve it? If yes , kindly ask you to make posting here so that others can benefit as well.
Huge thanks

Copy data between planning area with function module

Hi gurus!
I'm involved in a consumer products project
In my multiplaning area i copy "catalog code" from act to fct after a preliminary selection in a authorization layout..
Due to increase performance I'm in need to convert the FOX which copies data from actual plan area to fct plan area after the authorization check, into a formula exit...
This fox works fine but as you can imagine it takes a lot of time to execute cause it has to read every catalog code form the transactional data...
here follows gross summary of the code.
this FOX copies ACT catalog code into FCT catolg
code by CALQUARTER according to Catalog code
authorization stored in AUTH version
DATA PER TYPE 0CALQUARTER.
DATA ENDPER TYPE 0CALQUARTER.
DATA KEYF TYPE KEYFIG_NAME
PER = VARV(variable)
ENDPER = TMVL(per,4).
catalog code is present in the level selection
with no filter
AUTH is the version used for set up the
authorization in data copy (no quarte info is needed)
IF {KEYF,AUTH,#,PLAN1}>0.
PLAN1 I the FCT plan area, PLAN2 is the Act plan area
DO.
{KEYF,FCT,PER,PLAN1}={KEYF,ACT,PER,PLAN2}.
IF PER = ENDPER.EXIT.ENDIF.
PER=TMVL(PER,1).
ENDDO.
ENDIF.
I've found many example in the forum but nothing which refers to different planning areas data copy with exit.
I'll be gratefull to any of you who can help me to compile this function module.
Best regards
M91

Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil

Deriving 'company code' &'currency' with function module ????????

Hi all,
I created a function module to derive 'company code' and 'currency'and use a user EXIT variable for the CURRENCY. And it works.
My issue is : <b>is there any solution that I can avoid to enter CURRENCY (system will pop up a screen and ask for it) when I enter planning data?????</b> I think that this is because CURRENCY (in the selection)is a dependence with my KF-amount. However, I still want to try if I can make it not show up. Thank you.
J.

John,
Try putting the currency in the header of the layout and then hide it in the header characteristics screen.
Thanks and regards.
Rajendra Tewani

ALV Grid Traffic control Example program implemented with function modules

Hi Friends,
Can any one please give me ALV Grid control traffic lights example program implented using function modules instead of OOP ALV. It is very urgent,
Thanks in advance,
Santosh Kumar.

Hi Santosh ,
Here is a sampla code for the same
TYPE-POOLS : SLIS.
DATA : BEGIN OF IT_1 OCCURS 0 ,
           MATNR TYPE matnr ,
           FLAG TYPE C , " added for the traffic control
       END OF IT_1.
SELECT MATNR INTO TABLE IT_1 " Select Data
UP TO 10 ROWS
FROM MARA.
DATA : CATALOG TYPE SLIS_T_FIELDCAT_ALV ,
       WA_CATALOG TYPE SLIS_FIELDCAT_ALV ,
       LAYOUT TYPE SLIS_LAYOUT_ALV .
*" create catalog
WA_CATALOG-FIELDNAME = 'FLAG'.
WA_CATALOG-TABNAME = 'IT_1'.
APPEND WA_CATALOG TO CATALOG.
WA_CATALOG-FIELDNAME = 'MATNR'.
WA_CATALOG-TABNAME = 'IT_1'.
APPEND WA_CATALOG TO CATALOG.
DATA : FLAG_T TYPE I.
*"assign value to traffic signal
LOOP AT IT_1.
FLAG_T = SY-TABIX MOD 2.
IF FLAG_T = 0.
IT_1-FLAG = '1'.
ELSE.
IT_1-FLAG = '2'.
ENDIF.
MODIFY IT_1.
ENDLOOP.
*"specify the traffic signal field in the layout
LAYOUT-LIGHTS_FIELDNAME = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                =
*   I_BUFFER_ACTIVE                   = ' '
*   I_CALLBACK_PROGRAM                = ' '
*   I_CALLBACK_PF_STATUS_SET          = ' '
*   I_CALLBACK_USER_COMMAND           = ' '
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
   IS_LAYOUT                         = LAYOUT
   IT_FIELDCAT                       = CATALOG
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_ADD_FIELDCAT                   =
*   IT_HYPERLINK                      =
*   I_HTML_HEIGHT_TOP                 =
*   I_HTML_HEIGHT_END                 =
*   IT_EXCEPT_QINFO                   =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_1
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so rem all you need to do is add a feild in internal table for the traffic signal , assign values 0 , 1, 2 to it and last specify the name of this feild in the layout.
Regards
Arun

How to use fieldtab with Function Module F4IF_INT_TABLE_VALUE_REQUEST

Hi,
I'm using the function module F4IF_INT_TABLE_VALUE_REQUEST to build a matchcode in a selection screen parameter.
The internal table that I use have 3 fields:
        GROUPID like APQI-GROUPID,
        CREDATE like APQI-CREDATE,
        STATE type string.
STATE is not in ABAP dictionary, so the function doesn't show this field. I need this field having field label 'STATUS'
I have tried to use table FIELDTAB, but I cannot resolv the problem.
Can anyone help me?
Kind Regards

Hi
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards
Anji

Virtual cube with function module

hi
I wrote function module which is used with virtual cube.
When I launch query build on this cube in the BEX i can't interrupt execution
of function module. How to put break point. may be there is any option that could turn off debugging?

Try an external breakpoint. How you set that depends on your version. If there's not a button for it on your editor screen, look at utilities->settings->ABAP Editor->debugging in SE38.
matt

Generic delta with function module

Hi Gurus,
Is it possible to create a generic DataSource with delta support using function module following the queue delta mechanism (u can get some function moduel in MCEX function group, and check the outbound delta queue before and after update in transaction smq1.
I can store the delta data using qRFC and collective update mechanism. but I don't know how to create a generic data with delta and how to attach a rfc destination (& logical system) to the data source. The Source system information is stored in the table "ROOSGEN". Is there any configuration setting required to do the same.
Regards,
Jugal

Jugal,
What I understand you to be asking is if it is possible to create a generic delta extractor which uses the delta queue. If this indeed is your question the answer is yes.
First you need to create your data source so it is visible via tx RSA5 and need to make sure that the delta type (ie ABR, AIM)is set appropriately for the datasource.
The issue however is determining from where you will associate your delta hook (when will you write to the queue)? I have in the past utilized BTE's, Business Transaction Events to write information out to the delta queue, you can see a list of available BTE's in your system via tx FINF.
Once you find a place to write your deltas from you call the below FM with the appropriate datasource.
RSC1_TRFC_QUEUE_WRITE.
Once you have done this the standard BW extractor for deltas will pull the information from the delta queue. But from what I understand you just want to know how to associate the data with the delta and that is the FM listed above.
Hope this helps,
Cheers,
Scott
> Hi Gurus,
>
> Is it possible to create a generic DataSource with
> delta support using function module following the
> queue delta mechanism (u can get some function moduel
> in MCEX function group, and check the outbound delta
> queue before and after update in transaction smq1.
> I can store the delta data using qRFC and collective
> update mechanism. but I don't know how to create a
> generic data with delta and how to attach a rfc
> destination (& logical system) to the data source.
> The Source system information is stored in the table
> "ROOSGEN". Is there any configuration setting
> required to do the same.
>
> Regards,
> Jugal

XI-- IDOC scenario, how to link process code with function module

Hi Forum,
I have a XI--->IDOC (R/3) scenario,
where i m creating a IDOC in XI and sending it to R/3,
i have done all settings to send the IDOC from XI to the R/3,
i also have the function module to process that IDOC in R/3,
the problem is:
I want to know in details (step by step) how to make a Idoc Inbound process code, link it with the function module and use the process code in the Partner Profile in R/3,
pls help

HI,
FOr this u need to go to transaction WE41 for inbound and WE40 for outbound there u assign the function module.
Now u go to WE20 transaction for partner profile and u can assign the proces code to the inbound message.
Go to the below help for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
Inbound process code:
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
Thnx
Chirag

How to create Drop-Down with Function Module REUSE_ALV_GRID_DISPLAY

Hi Experts,
I have used Reuse_alv_grid_display function module in my report for ALV output. I have a requirement to add drop down in one cell of my output. I have searched but all are suggesting through OOPS programing that I can not use.
If it is possible with the given scenerion , please help me how to write the code for it?
Thanks a bunch in advance.

Hi,
You can check demo programs:
BCALV_EDIT_06
BCALV_EDIT_07
Hope it helps
Regards
Mansi

Hierarchial Layout Saving with function modules

Similar Messages

Maybe you are looking for