Generic Data Source with Function Module data mismatch in BI

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

the datasource frame work starts the function module several times.
1. the initialization
2. the serval times, until you "raise no_more_data".
check you coding: have you refreshed necessary internal tables.
Sven

Similar Messages

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

BC data source and functional module

Hi Gurus
I know that we can extract data via functional module in case of generic extractor but when we use business content data source ( for ex.0MAT_PLANT_ATTR) is it possible to use functional module to extract the data?
How can we find the functional module? my requirement is I need to enhance this data source with few more attributes.
Pl help. also advise where I need to write the code?

You can see if it FM based or not, in RSA2, or, in table ROOSOURCE (on the source system).
In general, it is not possible/advisable to change the BC extractor FMs.
Right way to go about is to use enhancements. For this case 0MAT_PLANT_ATTR, if the other attributes are coming from same material tables, you may be able to get those by enhancing the extract structure.
If not, you can enhance the extract structure, and write the code in the user-exit provided for extending master data extraction (function EXIT_SAPLRSAP_002 - check its documentation in SE37).

Creation of Generic Data source using function module based on the program which was used to created ABAP report

Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
Ravi

Hi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query

Generic Data source on Function module

Hi All,
We are working on generic data source based on a function module for the first time and we do not know how to start with.
Our requirement is to fetch mode of communication field from SRM. We have identified a function module in SRM which does this job. But when we try to create a generic data source on this function module it is throwing an error.
Are the import parameters for a general function module and function module for a BI generic data source different?
If so could someone please guide us in creating the function module so that we can create a generic data source on top of it.
The function module should serve the same purpose as the function module BAPI_BUPA_ADDRESS_GETDETAIL.
Thanks,
Shravani

Shivani,
My suggestion would be creating Z-program to store the values in a custom table and use this for extraction.
Further if still want to use the FM itself, post the error details you are getting.. or try to analyse the FM and find the base table so that you can directly use in extraction.
Hope this helps,
anil

Data source Enhancement with Function Module

Hi all!
I have a requirement like I have to enhance my Generic Data source.
Let me make it clear!
I have 10 field in R/3 which I am able to get into extract structure using Generic Data Source on the corresponding Table.
I have another field on my extract structure, say ZEXMFLD1 which is updated by a function module ZZ_FUNC_MODULE_SAMPLE.
I came to know that Data source Enhancement can be done, but don't know how.
Request your guidance in this. Can u please let me know how I can achieve this?
Thanks,
Sri

Hi Sri,
You can enhance generic datasources also.
For that you have to use below function modules based on your datasource type.
EXIT_SAPLRSAP_001 - Transactiona data
EXIT_SAPLRSAP_002 - Master
EXIT_SAPLRSAP_003 - text
EXIT_SAPLRSAP_004 - Hier
First check in CMOD(TCODE) whether component RSAP0001 is assigned to any project. If it is not assigned to any project(fresh system), assign it to a project by creating it.
Ex. ZBW. If it is already assigned, go SE37.
For transaction data go to function module EXIT_SAPLRSAP_001(Trans data) and start your logic.
CASE i_datasource.
WHEN 'your data source name'.
call you Function module - CALL 'ZZ_FUNC_MODULE_SAMPLE'.
pass the imported value from above FM to c_t_data.
close case with ENDCASE.
Let me know if you need more info.
- Kalyan.

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

Generic Data source with Infoset Query

Hi All,
Please provide me the links or PPT's or Information or PDF's for the creation of the Generic Data source with Infoset Query or
Please explain in clear steps how to create Generic Data source with Infoset Query.
Thanks & Regards,
Ravi

Oopps...being a BI guy, always think of BW
I have never created, though I will suggest to follow this:
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR u2013 PM u2013 Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset u2013 Create u2013 enter name of Infoset - Data source -- > Table join by basis table u2013 give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables u2013 give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness..
Thanks...
Shambhu

To update Employee Data with Function module

Hi
CRM employee master and HR employee master need to be mapped
for the labor cost posting function to work.
In BP transaction (Change in BP role : Employee),
I could update "Personnel number" and "User Name"
under Identification Tab
now I need to do same job with Function module in report program.
Anybody knows that what Function module should I use ?
I tryed to do it with Function "CRMXIF_PARTNER_SAVE"
but I only succesed to update imformations under Adress tab in BP transaction.
thank you.

Use FM BAPI_BUPA_CREATE_FROM_DATA.
Rg,
Harshit

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

Using JDBC Data Sources with ADFBC, NoInitialContextException

Using JDBC Data Sources with ADF Business Components, NoInitialContextException
I follow the instruction in the link below to create an ADF Swing application using datasource. I am using JDeveloper version 10.1.3.
http://www.oracle.com/technology/products/jdev/howtos/10g/usingdatasources/using_datasources.html
The ADF generated code looks like this:
JUMetaObjectManager.setErrorHandler(new JUErrorHandlerDlg());
JUMetaObjectManager mgr = JUMetaObjectManager.getJUMom();
mgr.setJClientDefFactory(null);
BindingContext ctx = new BindingContext();
ctx.put(DataControlFactory.APP_PARAM_ENV_INFO, new JUEnvInfoProvider());
ctx.setLocaleContext(new DefLocaleContext(null));
HashMap map = new HashMap(4);
map.put(DataControlFactory.APP_PARAMS_BINDING_CONTEXT, ctx);
mgr.loadCpx("datasource.view.DataBindings.cpx" , map);
final FormMain frame = new FormMain();
frame.setBindingContext(ctx);
I got this error when executing the last line: frame.setBindingContext(ctx);
(oracle.jbo.common.ampool.ApplicationPoolException) JBO-30003: The application pool (datasource.datamodel.AppModuleDS) failed to checkout an application module due to the following exception:
----- LEVEL 1: DETAIL 0 -----
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/xe_hrDS
----- LEVEL 2: DETAIL 0 -----
(oracle.jbo.DMLException) JBO-27200: JNDI failure. Unable to lookup Data Source at context jdbc/xe_hrDS
----- LEVEL 3: DETAIL 0 -----
(javax.naming.NoInitialContextException) Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
If I configure the application module connection type as JDBC URL, everything works.
If the connection type is JDBC Datasource, I got the above error.
Can someone show me how to adjust the generated code by ADF to use datasource?

ADF BC has a bug. With Data Source in Application Module, application module does not connect. Use JDBC Connection URL.
Also refer
ADF BC: JDBC URL vs JDBC DataSource

To get evt_creation_date and _evt_creation_time data in a function module

Hi gurus,
How do we get evtcreation_date and evtcreation_time data into check function module or implementation of object type? I am using cdhdr and cdpos and able to write my own logic.
Thanks in advance!!!
Xevi G.

I think check FM's contain these value in any paramters.
Otherwise check CDHDR/CDPOS with appropriate OBJECT number etc.
This question can more appropriately answered in WORKFLOW forum.
Try [this|http://www.*******************/2007/09/work-flow-2.html] link also.

How to add Test data for a function module

Hi experts,
i want to add test data for a function module . i don't know how to proceed on it . please help me...
with regards,
James...
Valuable answers will be rewarded...

Hi,
- Go to SE37 and execute your FM
- Enter the data you want to pass to FM
- Hit 'Save' button. Enter the meaningful name for your test scenario and save. That's it you have saved the test data.
You can also enter some other test data and save that also. In short, you can save multiple test scenario. Also, you can give multiple test scenario a same name and they do not overwrite each other ( but normally you give different name to differentiate them)
Next time you come to execute the FM again, hit the "test data" button and it will show you all the test scenario you have stored before. Select the one you want to use and it will load the data in FM parameters.
Let me know if you need any other information.
Regards,
RS

Not able to create a Data source with qty filed in the table

Hi i am having scenario.
i am doing a Genric R/3 extraction for R/3 system. I created a view from two tables. I have added a net quantity field also in then view table. But when i created a data source for that view it is showing a error message which says that it cannot create a data source with a quantity field in the table.
Here is my question. How to create a Data Source for a view table which has Qty filed in it.
Pls help with this.
Senthil

Hi Sensai,
U need to add reference table for the unit .... when added into the view u create .......the reference table name u can find in the table itself from where it is brought into the view.... in the table currency quantity fields........
U can add that table in the currency /quantity fields of the view....u need to add referecne field and table...and activate ........
i think it works
Regards
vamsi

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

Generic Data Source with Function Module data mismatch in BI

Similar Messages

Maybe you are looking for