Hierarchy activation

Hi all,
Till today we used to update a customer hierarchy via a process chain. The update is done via a full upload from SAP R/3. For one week we can not ACTIVATE anymore (but we can load it) a costumer hierachy from R/3, we got a timeout. Below some information from the short:
The termination occurred in the ABAP program "SAPLRSSHIER" in            
"EXPAND_SINGLE_LINKNODE_TIME".                                          
The main program was "RSABW_START_NEW ".                                                                               
The termination occurred in line 882 of the source code of the (Include) 
program "LRSSHIERU01"                                                   
of the source code of program "LRSSHIERU01" (when calling the editor 8820)
ABAP code:
008730   *                                                                     *
008740   *       FORM EXPAND_SINGLE_LINKNODE_TIME                              *
008750   *                                                                     *
008760   *       ........                                                      *
008770   *                                                                     *
008780   *    >  L_S_RSNODES_LNK_HELP                                          *
008790   *    >  C_MAX_NODEID                                                  *
008800   *    >  C_CHANGING_INDEX                                              *
008810   *                                                                     *
     >   FORM expand_single_linknode_time                                      
008830             USING i_s_rsnodes_lnk_help  TYPE  rssh_s_timersnode         
008840             CHANGING c_max_nodeid       TYPE  rshi_s_hienode-nodeid     
008850                      c_changing_index   TYPE sy-tabix.                  
008860                                                                         
008870     DATA: l_s_rsnodes_lnk_help  TYPE  rssh_s_timersnode,                
008880           l_s_node_help         TYPE  rssh_s_timersnode,                
008890           l_t_rsnodes_lnk_help  TYPE  rssh_s_timersnode OCCURS 0,       
008900            l_s_rsnodes_lnk      TYPE rshi_s_hienode,                    
008910           l_index               TYPE sy-tabix.                          
008920                                                                         
008930     FIELD-SYMBOLS: <l_s_hienode_org>       TYPE  rssh_s_timersnode,     
008940                    <l_s_hienode_org_child> TYPE  rssh_s_timersnode.     
008950                                                                         
008960     l_s_rsnodes_lnk_help = i_s_rsnodes_lnk_help .                       
008970     l_index = c_changing_index.
Furthermore, I note that an important change has been performed on this hierarchy in SAP R/3. Indeeed the nomber of records of the new upload has increased of 70000 records (normaly only 5 or 10 records were added). Therefore I suppose that the root cause of this issue is due to a data incoherence.
What do you think? Have you ever got a problem to activate an hierarchy? Any suggestions?
Thanks in advance
Jak

Jacques,
Please give us your SP levels and looks like a lot of nodes have been added and could be an issue with unassigned nodes containing too many nodes...
best check the hierarchy in R/3 before doing the update again...

Similar Messages

  • Hierarchy Activation dumps when itu0092s executed from Process Chain. u0096 BI 7.0

    Issue:
    CostElement Hierarchy sign reversal is updated manually using ABAP Program to update sign reversal, which updates H and J tables and activates the Hierarchy using func module RSHIER_HIER_CHECK_AND_ACTIVATE. It works fine when ABAP is executed manually as well as when Process Chain is executed in BW 3.5.
    However, the same Process Chain in BI 7.0 it abends during Hierarchy Activation.
    From the Dump, find below call sequence of programs for more details:
    No.   Ty.          Program                             Include                             Line  
          Name                                                                               
    6) METHOD       CL_RSSH_SHOW_LOG==============CP    CL_RSSH_SHOW_LOG==============CM008    53 
    CL_RSSH_SHOW_LOG=>CREATE_CONTAINER                                                         
    5) METHOD       CL_RSSH_SHOW_LOG==============CP   
    CL_RSSH_SHOW_LOG==============CM007    52 
    CL_RSSH_SHOW_LOG=>SHOW_MESSAGES_WRITE_LOG               
    4) FUNCTION     SAPLRSHIER                          LRSHIERU03                            121 
          RSHIER_HIER_CHECK_AND_ACTIVATE              
    3) FORM         ZBWUXXX1                            ZBXXXXX1                              382 
    005-ACTIVATE-HIER                                                     2) FORM         ZBWUXXX1                            ZBWUXXX1                              278 
    It abends during Container creation to send out a message.
    Any help to resolve this issue would be highly appreciated.
    Thanks, Vijay

    Vijay,
    Due to the age of this post I am assuming did you find a fix to the problem?
    I actually would like more information about your abap program as we are trying to create a similar program.

  • Hierarchy Activation Failure

    Hi All,
    I have included a hierarchy activation step in a process chain immediately after loading a hierarchy. However, the hierarchy activation is failing with the following error message:
    **Hierarchy that was loaded with request l_rnr cannot be activated
    Can anyone advise what's wrong? Thanks.
    Regards,
    KM

    Hi Koon,
    Check table /BI0/HEVENTGROUP there has to be a record for 022540.
    Selection of HIEID you get with TA RSH1 -> right click on requested hierarchy -> details -> internal hierarchy id
    or by displaying the hierarchy -> header data.
    Are there many values for this hierarchy with 5 or 6 digits?? If so, maybe you can ad missing digits while uploading from source system. If its only one you can repair the hierarchy manually by creating the correct node in RSD1 and change node 022540 with node 00022540 in the hierarchy.
    Klaus

  • Error in Hierarchy activation

    Hello Experts
    I re loaded hierachy for 0material, infopackage failed with error "Error arose when activating the hierarchy; Hierarchy not active
    I tried activating using FM RRHI_HIERARCHY_ACTIVATE got error "There is no modified version for this hierarchy"
    I am able to see M and A versions of hierachy in hierarchy maintenance.
    but when i mannually try to activate hierarchy i get short dump with message 
    Short text
        Message type " " is unknown.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Please help.
    Regards
    Sudeep

    Hi sudep,
                     did u done the attribute change run for hierarchy after loading the hierarchy?.....
    try the below steps
    1) Load Hierarchy
    2) Save Hierarchy
    3) Attribute CHange Run on the InfoObject.
    Run these in the same sequence and see if it solves the problem.
    Make sure that you have this Checkbox on:
    1) In Infopackage, in tab Hierarchy Selection, there is a small checkbox for 'Flag for Activation'. Make sure its ON.
    2) In Save Hierarchy Process Type, the same check box should be ON.
    Harikrishna N

  • Hierarchy Activation failed

    In Process chain for hierarchy we have a save process, which activates the hierarchy.
    This process failed with 0CUST_SALES table locked, so couldnt activate the respective hierarchy.
    When from RSA1 activated the hierarchy manually showing modified on list, it gets done.
    Can any one help on whyit fails while activating automatically through chain

    Hi,
    The reason may be the object 0CUST_SALES related to that save hierarchy process got locked at that time it is running in process chain.and the lock was released at the time u manually executed it that's why it allowed you to actiavte it manually.
    Before repeating that process you can check in SM12 whether lock has been released or not and then u can proceed by giving repeat on that particular event in process chain.
    Hope u understand.please assign required things if it is helpful.
    Regards,
    nani
    Edited by: Nani on Oct 28, 2010 11:45 AM

  • RSA1 Hierarchy Activation

    I updated the product hierarchy in V/76 and in trans MM02 works fine but not in trans MCBA.
    So I went in RSA1>Tools>Apply Hierarchy/Attribute Change.. and hit Execute and it shows: "Program RSDDS_AGGREGATES_MAINTAIN successfully scheduled as job BI_STRU(big string here) with ID 18335500"
    What would be the next step to activate the hierarchy?
    I went to edit > infocubes on RSA1 but there are none created, not even in the matchode. All this is in DEV environment. In fact I have to enter a name for the System Logic in order to get into RSA1 transaction.
    I am rather a MM guy, so I am pretty lost here.
    Regards,
    Carlos

    I found a book online its a much larger subject I suspected first.

  • Count difference when hierarchy is active/ hierarchy is inactive

    We have hierarchy activated on 'first contact date'. We have the KPI 'Number of Complaints'. and we have char infobject 'Transaction Number' (complaints id).  For all 'Transaction Number' we do not have the 'First contact date'.
    We have in the initial layout 'First contact Date' and 'Number of Complaints' when hierarchy is activated for 'first contact date' we have 'Number of Complaints' as 8  when hierarchy is inactive we have 'Number of Complaints' as 5.   The difference 3 is because these 3 transactions have 'first contact date' as blank.  Our requirement is to have the count to be same as 8 with hierarchy activation and hierarchy inactive. Can u suggest how to go about this.

    Any ideas on this????

  • Urgent: hierarchy in report

    Hi,
    How can I exclude a account number with hierarchy active for it.
    I have a report in which col1 is account hierarchy and col2 is amount. In the report I want to exclude one account form the report. I right click on account number, select the option select filter value.. , select that particular account. For the account being selected in the selection box the option exclude from selection is grayed out and so I cant select it. If I make hierarchy inactive in the report and then try it I can do exclude from selection. But now with this filter condition on if I make hierarchy active then it gives me following message:
                                                                                    Invalid filter on 0ACCOUNT: Filter changed                                                                               
    Message no. BRAIN502                                                                               
    Diagnosis                                                                               
    You tried to filter according to an invalid value.                                                                               
    This could be because you filtered according to a hierarchy node which  
        is not visible to the current user.                                                                               
    System response                                                                               
    The filter is not evaluated for the characteristic, but removed instead.
        If no other filter values exist for this characteristic, the system     
        responds to the whole request with the message "no applicable data      
        found".                                                                               
    Thank you,
    sam

    Try placing account number in global filter and do the same (select the account and choose exclude).
    Hope it works.
    Regards

  • Aggregation at hierarchy node

    I have following data in the cube.
    Material     qty
    M1          20
    M2          30
    M3          -20
    M4              50
    And Master data - Material Hierarchy is
    Material Hierarchy
    Mgrp 1
      M1
      M2
      M3
      M4
    I need to display only quantities with positive numbers, ie records 1, 2 and 4.
    So the report should look like
    Mgrp 1   100
      M1     20
      M2     30
      M4     50
    If I use the condition I get following result
    Mgrp 1   80
      M1     20
      M2     30
      M4     50
    PLease suggest a way to get the desired results.
    Thanks

    your expected behaviour works for me (BW30B SP26).
    Furthermore, the system doesn't allow me to calculate results as summation for a hierarchy.
    The settings of 0MATL_GROUP:
    Hierarchy: active.
    Suppress result rows: never.
    The hierarchy attributes settings (RSD1):
    none of the check boxes are marked
    Root/Total Item appears above.
    In the QDesigner the hierarchy is not activated, I activate it directly form the Web reporting.
    The Keyfig as nothing special, calculation = "nothing defined"
    Condition: I tried with all characteristic in the drilldown as well as with selected (0MATL_GROUP). Qty > value.
    It works just fine: I get the total amount without condition in the result.
    Please let me know what do you have on your side....
    Olivier.

  • Error while executing report related to hierarchy

    Hello all
    Why trying to execute a query that we moved to production we're getting the following error.
    Error Hierarchy MANAGEMENT_REPORTING 99991231 is not available for InfoObject
    This heirarchy is defined on the BCOCOM_CC Combination code info object and is a time dependant heirarchy.
    I can verify that the definitions of the queries in both Quality and Production are the same and data had also been loaded into the heirarchy and the hierarchy tables are active.
    There are no authorization defined on this object.
    Please let me know your views
    Thanks in advance

    Hi..
    couldnt respond coz its a busy day...
    1.Check your query in development..
    Open query designer --
    right click the concerned infoboject for ur hierarchy and
    in the properties window click on hierarchy.tab...
    are you able to see the hierarchy active there...i.e. is it available there??
    Now if everything is fine then run the query in development and check if there is issue?
    If on query execution everything is fine then compare the hierarchy properties of two queries..of Prod and Development..there should be some settings different..or transport issue...
    If possible transport the query once again..if it is working fine in dev.
    Regards,
    rk

  • Issue with Hierarchy selection in Filter area

    Hi experts,
    We have an issue with BEx query selection.
    Structure of Quey
    1. Filter Area
    => Characteristic Relations : Restriction condition with hierarchy
    2. Rows
    => Display characteristic with hierarchy active
    3.Columns
    => Formula with keyfigure using sign reverse of hierarchy (formula variance).
    <symptom >
    When I use context menu, "Keep filter value", with the displayed hierarchy node,
    and drilldown with other characteristics, the result became wrong. Filter value I kept became inactive.
    Workaround I found was like belows.
    1. Remove sign reverse calculation in Formula.
    2. Keep sign reverse calculation and move restriction condition with hierarchy in filter area TO default values.
    I wonder this symptom was right technically or bug ocurred after version upgrade or something.
    Thanks in advance.
    BEx BI Addon 7.X(based on 710)/SP11 Revision 634

    Hi
    This depends on the logical database that the report is based on. Secondly I have experienced that the report variant overwrites the date selections and therefore it looks like that the dates are not parsed (which I think is your problem).
    For e.g. logical PHP and PHPCE both the period and data dates are filled with the data selection from the portal. (check on the report attributes in SE38 which logical DB used) For e.g. PTRVP (travel) no date are passed at all in the call of the report!!
    To make sure that the report variant isnu2019t overwriting I normally set the variant for the report to u201CSave field without valuesu201D for the date selection periods and then it isnu2019t filled by the variant.
    Data selection period
    Data selection period: Start
    Data selection period: End
    Employee selection period
    Employee selection period: Start
    Employee selection period: End
    Regards,
    Lars

  • Subtotals problem in hierarchy selection

    Dear all,
    we have a technical problem in query 'Deviation Analysis'. When data is
    displayed as a hierarchy ('Brand local hierarchy', or 'Universal
    hierarchy'), calculations ("Calculate Result as...") in Subtotals of
    'Formulas' are ignored. Calculations in Subtotals are correct when
    hierarchy view is deactivated. For instance,
    execute query with following selection:
    Company Code = ES01
    Sales Organisation = ES20
    Calendar Month = 01.2005
    1. HIERARCHY DEACTIVATED
    Deactivate Hierarchy of 'Prod-L2 Brand'. Check Subtotal in column 'Volume
    Deviation Last Year' = -517. Bear in mind that 'Properties' of Key Figure
    'Volume Deviation Last Year' define Subtotal as a 'Summation' of singles
    values above. Then Subtotal result we get here is correct.
    2. HIERARCHY ACTIVATED
    Then activate hierarchy of 'Prod-L2 Brand'. In the same figure 'Volume
    Deviation Last Year' you will get a different Subtotal = -831, which
    actually displays a Subtotal result as if nothing was defined in
    'Properties' of Key Figure 'Volume Deviation Last Year'. It seems to ignore
    'Summation' subtotal result.
    As users need to report data with this special hierarchy for Brand, we
    really need to have correct subtotal result in situation 2, that is when
    hierarchy is active.
    pls help me...Thanx in advance..

    Rajesh,
    You might want to check out this note, 460255, which exaplains the limitations and behavior of the result rows when hierarchies are used in the query definition.
    Good Luck
    Gova

  • Hierarchy Level value displayed in BEx Query

    Is there a way to display the Hierarchy Level value (0, 1, 2, etc...) associated with each hierarchy level in BEx Query as a characteristic?
    we are currently using the Crystal Reports function HierarchyLevel(GroupingLevel(GL Account Node id)) to display the level of the node (0, 1, 2, etc...).  Is there something similar to this in BEx Query.
    We would like to use this Level value to do groupings in Crystal Reports.  When we try to create a Group, we can only create the groups on fields that are brought over in the BEx Query results.
    Thanks --

    Hi ,
    Hierarchy level can be defined in Bex query as well.
    In the query property there is option where you can say hierarchy active for that particular object.
    Also you can define level upto which it can be active in initial display say 3 level
    Also when you want to drill down further level 4,5 you can right click and select that particular level say 4 or 5 or 6.
    If you want to display hierarchy flat there is no option in BW then to right code,but I heard in crystal report it will automatically display in fl;at version as well  means
    Level 0 level 1   ......KF1 KF2  etc.
    Thanks and regards

  • Total of Hierarchy

    I have 0Product Hierarchy activated in the Row. The Hierarch has 3 level.
    In column, there are 3 Key Figure - A, B and C.
    Column C is the Average Amount, the fomular is Total of the 0Product Hierarchy divided by current Hierarchy Level.
    Question is how can I get the Total of the 0Product Hierarchy?

    Hi,
    Yes, I am using Account Number in my Query.
    The Account Number is placed in the Rows, with Hierarchy option activated.
    In the Accoutn Number characteristic property, the Display of Results ->Suppress Results Rows is "Never".
    what do you mean by "and display resultsd just before object to hierarchy (I guess account number)."?
    Please help.

  • Hierarchy can't run in bi7 analyzer

    hi:
      i have set hierarchy active in a query ,when i open the query with bi3.X analyzer ,the hierarchy is ok.but when i open the query with bi7 analyzer and click the hierarchy,the system is responseless.
    who can help me ! i'll very appreciate!

    in 3.x analyzer,when you click the hierarchy icon,the hierarchy explanding ,but in 7.x analyzer,you shoud double click the hierarchy icon when you want the hierarchy expland.

Maybe you are looking for