Hierarchy display not enabling drill down

Hi
We have a custom hierarchy on the cost center object which has 5 levels. The 5th level is the cost center.In some nodes the values are repeating for the first 4 level.
e.g.
level 1 : ABC
level 2 : ABC
level 3 : ABC
level 4 : ABC
In such a case the drill across functionality is working fine, but the drill down is not enabled with the hyper link for us to drill down the hierarchy
The hierarchy is properly displayed in the BW side.
what is disabling the hierarchy display
regards

Hi this is a known issue. pls log a CSS message for this and include the link to this discussion in the message.
you will be notified when the fix is available.

Similar Messages

  • Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down

    Hello,
    We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
    Webi report on OLAP Bex query -  Cost element Hierarchy not working Drill down
    Any pointers how to do it please
    Thanks
    Krishna

    Hi,
    WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
    You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
    Regards,
    Loic

  • How to enable drill down?

    Hi,
    I use BIEE 11.1.1.5.0. I can drill down by clicking column. But I made some changes to the repository recently. It doesn't support drill down now. Is it any additional config to enable drill down?
    Thanks

    Hi,
    Did you delete any dimension hierarchy in the rpd.Could you elaborate on the change?
    Rgds,
    Dpka

  • Not getting drill down in Excise Tab during MIGO

    Hello,
    I am not getting drill down in Excise tab during MIGO only "no excise duty" coming. I have configared SPRO - Logistic general - Tax on goods movement - India - Business transaction - Incoming excise invoices - Define processing mode per transaction .Along with maitained J1ID too.
    Can any one have idea on this.

    Hi,
    Check for the -J1IEX -Active for all activities in 
    SPRO - Logistic general - Tax on goods movement - India - Business transaction - Incoming excise invoices - Define processing mode per transaction.
    Then check  for the Support package of -Logistic and accounting.any Notes are missing.
    Properly maitai J1ID  details w.r.t Vendor,materials,excise rates,etc
    Is all  Tax details are showing in your PO invoice Tab ?
    with regards
    Shrinivas gangoor

  • How to properly enable drill-down capability

    Dear Experts,
    I am trying to enable drill-down to my existing stacked bar chart.  Can someone briefly describe how I can successfully complete this task?
    Thanks in advance,
    Zack H.

    add a series to the chart
    go to properties for the chart
    click Drill Down Option in the properties window
    click Enable Drill down and follow the options
    good luck
    Amr

  • How to Enable Drill Down in WebI through Infoview

    Hello Experts,
    I have WebI report, I am running through Infoview and I see drill down option is disabled, can anybody help me how to enable drill down option.
    Thank you
    Ravi

    HI Ravi,
    Log on to CMC -> Application -> Right Click on Web Intelligence Rich Client -> Select your user -> Assign Security -> Advanced tab -> Select "Unassigned Rights" in Common Filter Settings -> Select Enable Drill Mode in Rights Name Column -> And assigned grant level to it.
    Hope this help.
    Regards,
    Rishit

  • Dynamic hierarchy-level entering dashboard & drill-down

    Hi there,
    I have a requirement to create a report which, depending on the user that opens the report, needs to start at a specific level within an organisation hierarchy. Once the user has opened the report (which will be part of a dashboard), he should be able to drill-down the organisation hierarchy from his entry-point down. I've been able to create that report but when drilling-down it doesn't quite work. No matter at which level a user opens the report, when drilling it will drill-down immediately to the lowest level of the hierarchy, skipping (= not showing) intermediate levels.
    Here are the details:
    Organization hierarchy:
    - Org_Level_0
    - Org_Level_1
    - Org_Level_2
    - Org_Level_3
    - Org_Level_4
    - Org_Level_5
    - Org_Level_6
    - Org_Level_7
    - Org_Level_8
    Using an InitBlock each user is assigned it's a session variable ENTRY_LEVEL which contains the user's organization hierarchy level (i.e. '5'). For Testuser5 the session variable contains '5'.
    I've created the report containing two columns:
    - A dimension column called 'Organization'
    - A measure column called 'Availability%'
    In the dimension column I've entered the following formula:
    CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='0' THEN DIM_ORGANISATIE." Org_Level_0"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='1' THEN DIM_ORGANISATIE." Org_Level_1"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='2' THEN DIM_ORGANISATIE." Org_Level_2"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='3' THEN DIM_ORGANISATIE." Org_Level_3"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='4' THEN DIM_ORGANISATIE." Org_Level_4"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='5' THEN DIM_ORGANISATIE." Org_Level_5"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='6' THEN DIM_ORGANISATIE." Org_Level_6"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='7' THEN DIM_ORGANISATIE." Org_Level_7"
    ELSE CASE WHEN VALUEOF(NQ_SESSION.ENTRY_LEVEL)='8' THEN DIM_ORGANISATIE." Org_Level_8"
    END END END END END END END END END
    In the Column properties/Column Format tab for the dimension column I've disabled Column Heading Interaction but I've set Value Interaction to 'Drill'.
    When opening the report as Testuser5, the Dimension column shows the correct dimension object from that user: Org_Level_5. However when then clicking on the dimensionvalue, the next dimension displayed is Org_Level_8, instead of Org_level_6.
    Any suggestion on how to obtain the desired result?
    Thanks!
    Edited by: The_Dutchman on Oct 7, 2009 5:31 PM

    Check in the RPD in the BMM in the dimension wheater all levels have a key that is set to use for drill down. It seems that only Org_Level_8 (the last level, detail) has key - use for drill down checked. This allow columns on the level to be displayed when driiling from up level to the current one. So maybe this is a reason that you get only Org_Level_8 data when driiling from any level from the case statement.
    Regards
    Goran
    http://108obiee.blogspot.com

  • Enabling Drill Down Buttons on queries

    Dear experts,
      I have been writing queries on SAP query manager but for  some reason the orange drill down button does not appear. At other times it appears on default, Is there a way to have this button appear especially on master data , documents or transactions as you would like ?

    Hi Martin,
    The orange arrow will be displayed on all document transaction and mastercodes having a unique Id generate by SAP. specially numbers link BP codes, Item codes.
    You could try using "FOR BROWSE" at the end of your query.
    To your Query please find the solution in the below link SAP Note.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1410595]
    Regards,
    Rakesh N

  • Variable hierarchy display not changed (BEx analyzer)

    Hi
    We have a BEx query, in which a drilldown characteristic is displayed as an hierarchy
    Hierarchy display is active
    Selected hierarchy:
    Name - constant
    Version - customer exit variable
    Customer exit calculates version from manual input variable.
    We need to view the report in BEx Analyzer.
    When the query is opened, we select manual input variables and the hierarcy's version is set correctly.
    The issue is that when we change manual input variables at runtime, the data is refreshed,
    but hierarchy display is not changed. The selected hierarchy's version remains unchanged.
    In order to change hierarchy display, we need to open characteristic properties and change the selected hierarchy manually
    or we need to reopen the query and provide another manual input variables.
    Our system version is 7.01 patch level 9
    Is there any way to fix this problem
    Or some workaroud?
    Any help will be appreciated.
    Thanks

    Michael, thank you for reply.
    But I don't see how these notes may help me with my problem.
    1753959 - I don't get a short dump
    1745472, 1751321 - system displays all queried nodes, the problem is that if I input another variable, hierarchy version variable is calculated via user-exit properly (I see it in ABAP debugger), but displayed hierarchy has version, which was set when I opened query initially.
    1717433 - nodes are returned with non-empty result. I can see that data is refreshed, hierarchy version is requested correctly, but is displayed incorrectly. We can see, for example, new hierarchy leaves, but in "n/a" node.
    I tried to run the same report on system with version 7.01, patch level 12 and get the same behaviour.
    My problem is similar to that described in notes 993151, 957219, but our system patch level is already higher.

  • Sheet runs query twice? (Not with drill-down)

    I have a sheet that seems to run more than one query.
    The Progress bar counts down, and then completely restarts. Each query takes about the same amount of time.
    A few facts:
    --This is using Discoverer Plus.
    --Also, we're patched up to 9.0.2.53.12.
    --The sheet does not include a drill.
    --An examination Sheet / Show SQL shows only one SQL statement.
    Before I enter a tar, has anyone seen this behavior?

    Just a guess, I think you're seeing one progress bar for the query time estimate prediction and a second progress bar for the query runtime. Sounds like the "guesstimator" takes the fully alloted time to decide the query is short enough to not ask you whether you want to complete the execution of the query. Then (I don't know why) the progress bar starts over for the rest of the query execution time.
    Please let us know if you find something else.
    Thanks.
    -John Hagel

  • PowerView option - Drill Down one level at a time also hide the columns other than the hierarchy columns

    Hi All,
    I have a simple PowerView report (Excel 2013) in which I have a hierarchy (three columns), an image column, and a Value column:
    When I change the Show Levels option to "Rows - Enable Drill Down One Level at a Time", image column also hide.
    I want to keep the image column displayed while drill down/up to the hierarchy.
    Is it possible? If yes, then how?
    Thanks & Regards,
    Muhammad Ehsan
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

    Hi Muhammad,
    According to your description, you have images at child level. Now you want to have the images displayed when have the child level items collapsed. Right?
    In this scenario, when you show the data in a matrix in Power View, those images, Size ID and Prices have been added into a child group. If we enable drill down, all the items within the child group will be collapsed. We can't change it at all in Power
    View.
    For your requirement, we suggest you design your report using SQL Server Data Tools in Reporting Services. In Reporting Services, we can have specific columns toggled by the parent item.
    Reference:
    Add drill-down to a Power View chart or matrix
    Drill-down Behaviour in Power View
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Diplaying matrix with drill down (toggle visibility) enabled for 4 row groups

    Hello,
    I have a matrix in SSRS 2012 with 4 row groups representing a product hierarchy.   Product Sub Group, Product, Sub Product and Account Number are the levels of the hierarchy.  I have enabled drill down (toggle item visibility) on the first
    3 of these levels. 
    This works great, but my matrix is very wide when it is first rendered.  Ideally I want my matrix to expand horizontally as I expand/drill down into each grouping.  So when the report is first rendered, and 3 of the groups are invisible, the
    matrix will be thin.  Is this possible?
    Thanks,
    Gabe

    Hi Gabe,
    Based on my test, it cannot achieved in SQL Server Reporting Services (SSRS).
    We can hide these column contents in matrix, however, we cannot hide the space in the report. In this situation, I recommend you use table to display these data.
    Alternative, we can add a drill-down in the column group to hide the column group when it is first rendered. Please refer to the following screenshot:
    If you have any questions, please feel free to let me know.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • BexGetData over data elements that are not drilled down

    Hi,
    I create a query in the query designer open the same in the analyzer. I perform navigations on the same and convert the worksheet to formula.
    Now the BexGetData formula contains references only to the items that have been drilled down in the rows or columns. Is it possible to reference the data elements in the free characteristics section (which have not been drilled down in the workbook before i convert to formula).
    Basically I am trying to avoid having to retrieve a large amount of information if I need to build a formula based on many data elements.
    Thanks
    Shailesh
    Message was edited by:
            Shailesh Unny

    Well you cannot as the BexGetData  works with the Analysis grid and its cells which are displayed in the result areas (rows and columns) and doesnt refer to Free chars
    PS-
    To avoid formula errors being displayed when you open the workbook in formula mode, configure the data provider for the analysis grid such that the results are displayed offline. This allows you to display the data in your result set without the need to connect to the server.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/015369f54f4a0ca19b28c1b45acf00/content.htm
    Hope it Helps
    Chetan
    @CP..

  • Drill Down in Dimension hierarchy in 11g......

    Hi,
    I place dimension hierarchy in my report.drill down is not working for dimension hierarchy.when I Click + symbol it working fine.
    requeriment is when I click The Value it will be Drilldown.
    Any Help....
    Thanks,

    Check these links
    http://www.rittmanmead.com/2010/10/oracle-bi-ee-11g-navigation-passing-parameters-using-hierarchical-columns/
    http://prasadmadhasi.com/2011/12/15/hierarchicalnavigationinobiee11g/

  • Drill Down functionality not Availible on Column Chart Bars

    Hi Guys,
    I have about 10 Webi 4.0 reports which are all column charts and are all made with drill down functionality enabled on them.
    The issue we are facing is that we need all the reports have drill down functionality available on the column bars and axis values (ex. "drill down to date" is available when mousing over the bars and axis values.)
    However, reports which have variable measures on them do not have drill down functionality available on the actual column bar in the chart, drill down is only available when mousing over the axis values. Now, I created the variable measure on the universe level as an object to check if having the object pulled into the report instead of a variable would enable the drill down function on the chart but this did not work either, still having the same issue
    Its important for us to have the consistency of the functionality being available on the bars and axis because it is more user friendly.
    If anyone has ever faced this issue I'd really appreciate your input on how this can be fixed.
    Thanks in advance!
    Zenab

    hi
    try this
    /*SELECT FROM dbo.OPOR TT*/
    declare @docNum as int
    set @docNum =/* TT.DocNum */N'[%0]'          
    SELECT
         T0.DocNum,
         T2.ItemCode,
         T2.ItemName
    FROM
                        dbo.[OPOR] T0
         inner join     dbo.[POR1] T1 on T1.docentry = T0.docentry
         inner join     dbo.[OITM] T2 on T2.ItemCode = T1.ItemCode
    WHERE
         T0.DocNum = @docNum
         and T2.CstGrpCode = -1
    for browse
    it works on me

Maybe you are looking for