Hierarchy sync from system to system

Hi All,
i need to synchronize the Hierarchies from one BW system to another BW system.
The challenge here is source BW system Hierarchy version is A00 and target is C00.
Can any body suggest how i can i achive this?.
Naga.

Hi,
Hierarchies cannot be Transportable. So you need to prepare Hierarchies seperately in each system for Sync across the systems.
Hope you understood.
Let us know if you still have any issues.
Reg
Pra

Similar Messages

Import of Merchandise Hierarchy changes from other system

Good day for everyone!
Can you please help me in this situation:
1. We have two system - SAP and system for master data maintenance (call it MD).
2. Merchandise Hierarchy structure creates in SAP and migrates to MD system.
3. All changes we want to make in MD system (creating/changing/deleting hierarchy nodes, hierarchy reorganization, creating/changing/deleting attributes for hierarchy nodes) and then pass it in SAP.
Are there any standard instruments in SAP that can allow to transfer all making changes for Merchandise Hierarchy in MD system to SAP (reports, FM and so on)? Maybe anyone have experience with similar situation? I hope for help! Thank you for answers!

Hi Olga:
The sceanrio is distribution from the sending system. Standard transactions and ALE support transfer of Merchandise Category Hierarchy (MCH) and dependant objects (characteristics and values, for example).
There are four message types that will be sent: W_WGRP, CHRMAS, CLFMAS, and CLSMAS. MCH objects have dependencies and therefore the sequence of these messages must be controlled, which requires the addition of a fifth message type: SERDAT.
It is important to understand that IDoc Serialization using message types is used when several different message types are dependent on each other, as is the case here. For example, if a merchandise category is assigned to a merchandise category hierarchy level, the merchandise category hierarchy level must first exist.
For this reason, the message types are grouped together in a serialization group, in which the processing sequence is defined. There is a standard serialization group for this purpose: GRP_W_WGRP.
Use the following path to configure inbound processing:
SALE > Modeling and Implementing Business Processes > Master Data Distribution > Serialization for Sending and Receiving Data > Serialization Using Message Types > Define Inbound Processing
Here is an outline of the steps:
1. SALE - Configuration of Serialization of IDoc processing
2. SM59 – Create RFC destination
3. WE21 – Create an RFC Port
4. BD64 – Create Distribution Model
5. WE20 – Create Outbound Partner Profile
6. WE20 – Create Inbound Partner Profile
7. WGSE – ALE MCH Objects
Please also take note of the following standard reports:
RBDSER01 creates the IDocs for a serialization group.
RBDSER02 dispatches the IDocs belonging to a serialization group.
RBDSER03 checks whether all the IDocs have been successfully sent to the receiving system. If they have, a control message of message type SERDAT is sent to the receiving system and posts the serialization group there.
RBDSER04 is for processing of inbound IDocs of a serialization group can be directly started by the Report RBDSER04.
You will want to also consider maintaining Reference Articles in the sending system and distribution of Reference Articles using ALE too. This is because Reference Articles are assigned to the Merchandise Category. The standard transaction for this is BD10.
In addition to the manual transactions and reports, change pointers can also be used to distribute the master data.
- Paul
Paul Gendreau, Jr.
SAP Retail

Hierarchy in CRM system?

Hi all
I have created a Base Hierarchy in CRM System by name " BASE_PROD" and assign some category to this hierarchy.
Now the problem lies in:-
1. I am not able to assign certain set types which I want to use as they are used in other Base Hierarchy ( These Base hierarchy are copied from R/3 to CRM)
2. I don't want to use the hierarchy which are copied from R/3 to CRM and want to create them in CRM system itself.
3. When I try to delete these Base Hierarchy in CRM, system issue error Massage " Hierarchy R3PRODSTYP may only be changed in original system ER1CLNT200".
(here ER1CLNT200 is the R/3 system).What is the menu path in R/3 for deleting/changing these Hierarchy.
4.Is there any way to use same set types which are already assign to other hierarchy/Category.

Hi
Proceed as follows to remove one or more objects from the hierarchy:
Select the objects to be removed by positioning the cursor on each of the objects and activating Select/deselect node (for entity types) or Sel./desel. sub-tree (for data models).
Select Modeling object ® Delete assignment.
The objects are automatically removed from the hierarchy.
You cannot remove an object from the hierarchy without also removing all its subordinate objects.
Delete assignment only removes objects from the data model hierarchy in question.
Cheers

Missing Application Component Hierarchy for source system

Hi
I have a problem I hope you can help me with.
We have created a sandbox as a copy of an existing APO/BW production system. On this system we have created 2 source systems: 1) R/3, 2) The system itself (EAX).
The R/3 source system seems to work fine, but there is a problem with EAX. First time i opened the system I was met with the message "Application component hierarchy does not exist, Create?". Nothing happened when choosing create.
After reading through similar topics on this forum, I went into RSA6. The view in here is similar to that on production, so I saved and tried again. Now it does come up with a tree, but it only has one node (NEW_HIER_ROOT(No Text Found)) and no datasources.
I then tried to transport the Application component hierarchy" from the production system. That didn't solve it either (still looks the same).
Does anyone know how to fix this? It would be much appreciated.
Br Karsten

Dear Karsten, Use transaction RSA9 for transfering appln. component hierarchy in source system.
let me know if you have any issue.
mahantesh

Please HELP!!!! Folder Sync and System Back Up.

Folder Sync and System Back Up, please help !!!
Posted: 25-Apr-2006 21:06
Reply Email
Right, there are the two things I can do with my Windows XP machines and can't find a valid solution on Mac OS X yet:
1. Folder Sync
I use 5 computers everyday, 2xMacs+1PCs at home, 1xMac at school and 1xPC in my office (part-time sys admin). It is obvious that i will need the folder sync feature so that I can keep working on one project on different computers. For windows there's a very neat feature called Briefcase, it bascially allows me to create two folders in different locations ( one in PC1, one memory stick for example ) and will automatically make sure these two folders sync with each other once connected . Just wondering if there's any software that allow me to do this on a Mac? and if it allow multiple sync (i.e. keep folders stored in 3+ locations up to date with each other, via network or portable storage device) that'll be even better.
2. Backup.
Since WInNT microsoft provides a Backup facility that allows me to perform regular backups of the entire system. except for the first backup which will copy my entire partition / harddrive content, the later ones will only add changed/newly created files to the existing backups (to save space and speed up the process). Carbon Disk Copy etc are merely GHOST-like utilities in Windows terms and does not have any advance features nor do they provide supports to exterenal hard drives (USB2, say). So, is there a good back up utility that I can use for my Mac OS X. ( i don't want to burn my 100G hard drive on 50 dvds every week )
thanks.

There are various solutions for both items. Smart Folders coupled with an Automator action or a Folder Action can be used to mirror folder contents. You can also sync contents using various backup or sync software such as Deja Vu, Synchronize! Pro X, Super Duper, Retrospect, or one of dozens of other similar utilities. They can be found at www.versiontracker.com or www.macupdate.com. These utilities can be used both for individual folder syncing as well as complete backup solutions. Some will work only on connected drives and others will also work across network drives.
If you can't find a satisfactory solution for OS X you just haven't looked hard enough because there are literally dozens of alternative solutions available including Unix commands that run from the command line such as rsync, psync, and ditto. Use the Terminal (Utilities folder) and explore the man pages for these commands to learn their usage. There are also freeware GUI wrappers for rsync and psync - RSyncX and PSyncX.
Also check out http://www.thexlab.com/faqs/faqs.html for the FAQ on backup and restore. Other useful articles are: http://www.egg-tech.com/mac_backup/ and http://docs.info.apple.com/article.html?artnum=106941.

Change ownership from "system" on mounted volume?

I have an external firewire drive with 3 partitions all of which are mounted on an iMac, and which until recently all had the same ownership and permission settings under my admin account. One of the volumes (the one storing all the users' iTunes songs) somehow changed ownership to "system" and group to "wheel". I can no longer access the volume nor can the other user accounts on the iMac, although it shows up as a mounted volume when viewed in Disk Utility. "Repair permissions" is unavailable for this volume in Disk Utility. The other two volumes are unaffected and retain the original ownership settings. I'd like to reset ownership from "system" to my admin account, but do not know how to do so as apparently it needs to be done through unix commands using Terminal. What do I need to do?
iMac Mac OS X (10.4.8)

"...under Ownership & Permissions, click on the lock, enter your password, and change the Owner to you, with R&W access and the Group to admin, also w/R&W access, and click o Apply to enclosed items. Click the lock and close the Info window. No need to use Unix commands in the Terminal app."
I first tried that approach but unfortunately the procedure does not work. Under Ownership & Permissions it says "You have No Access". I can click on the lock and select my name under Details: Owner, but once I click to relock, Owner just reverts back to "system".

Performance data from system and DMS logs on PDW.

I want all of ther performance data as given below of the particular completed job with respective login ID from system or DMS logs on PDW
What is total Memory and CPU used for completing the job?
How many rows processed?
What is read and write data size?
What is disk I/O ?
How much time taken for completing the job?
-Prasad KVSV

Hi Prasad, you may want to have a look at the following links:
http://download.microsoft.com/download/5/0/1/5015A62E-06BF-4DEC-B90A-37D52E279DE5/SQL_Server_2012_Parallel_Data_Warehouse_Breakthrough_Platform_White_Paper.pdf
http://saldeloera.wordpress.com/2012/08/27/pdw-tip-query-optimization-techniques-to-avoid-shufflemoves-and-partition-moves/
Regards, Leo

[Request] Move Windows Control Panel applet from "System and Security" to "Programs"

The "Flash Player (32-bit)" Windows Control Panel applet should be moved from "System and Security" to "Programs" where the Java applet is.
Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=2953107
Thanks

njb,
Why not just run the ThinkVantage System Update and let it install as usual. You can also "un-check" those drivers that you don't want to install.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

List of pending bills required from system

Hi
I have 58 branches all over India. Electricity Charges for all these branches are paid by HO depending on the electricity bill received by HO from branch. Electricity amount will differ every month for every branch
Now at the month end, i need to know the list of branches from which we have not received electricity bills. Since there are 58 branches, manual tracking for receipt of electricity bill is not possible.
So i need list from system itself which will show the branch list for which electricity bills are not received.
Note: Each branch represent one profit center.

Hi Meenu
I believe the reply given by SAPFICO holds quite good... It makes sense to me
You dont even need to go for any SHORT TEXT solution... And FYI, you can ask your ABAPer to create a F4 help for the SGTXT field and you can select values based on that... Or create one from Ob56
To simplify the process and make 58 entries each month, I would prefer a small development as below
1. Create a Z Table where you Maintain the Prof Ctr (Branch) / Cost Center, Amount, GL Account, and Month
Whenever you receive a bill, just make an entry into this Z table...
2. Create a BAPI program to post the elec bills in one shot to the desired Cost center
br, Ajay M

Old fonts from System 7 & Mac OS 8 & OS 9: Safe to install in 10.6.4?

I've been accumulating fonts for years and years. I recently got a new MacBook Pro and it's now running 10.6.4.
I still have, backed up on an external drive, hundreds of freeware, shareware and pro-level fonts which I acquired way back in the distant past, some as early as System 7 -- the "Date created" column says they're dated starting 1992 and every year up through 2004. (There's also about 15 System 6-era fonts in there too going back to 1989, but I think I'm just going to trash those.)
My question: Is it "safe" to install these fonts on my 10.6.4 machine? Or could the ancient fonts cause some kind of operating system meltdown or panic or whatever?
Perhaps the OS 8 & OS 9 fonts are safe, but not the System 6 and System 7 fonts?
Or all they all safe?
And even if they are safe to install: Will they work?
Lastly: What's the best way to install them? I see a new feature in OSX which I had never noticed until now is that if one double-clicks the font icon, a "Font Book" window pops up with an optional "Install Font" button at the lower right. By clicking that button, does Font Book physically move the font file to the proper place in the OSX system? Or...?
Any advice or insight into this problem would be most appreciated. I want to have access to all my old fonts (I still have many documents which make use of them) but I don't want to mess up my fresh new 10.6.4 system. Thanks.

My question: Is it "safe" to install these fonts on my 10.6.4 machine?
Yes.
Or could the ancient fonts cause some kind of operating system meltdown or panic or whatever?
Only if they conflict with other fonts, or are corrupt.
Perhaps the OS 8 & OS 9 fonts are safe, but not the System 6 and System 7 fonts?
Anything from System 8 forward will work. System 6 used bitmapped fonts. These are not supported in OS X. System 7 and 7.5 though were a mix. There were both TrueType and bitmapped fonts. Only the TrueType fonts can be used.
It does depend on where you're reading about these old fonts. One site notes that TrueType fonts were introduced in System 7. Another states that there were TrueType fonts in System 6.
And even if they are safe to install: Will they work?
Yes. I have tons of old fonts; Mac TrueType from OS 9 and earlier, Type 1 PS fonts from way back, etc. They all work just fine.
What's the best way to install them?
The best way actually, with Font Book, is to not install them. Which I will explain per the next part:
"Font Book" window pops up with an optional "Install Font" button at the lower right. By clicking that button, does Font Book physically move the font file to the proper place in the OSX system?
If you look in Font Book's preferences, fonts you "install" can go to either the /Library/Fonts/ folder, or by default, the Fonts folder in your user account. What you really want to do is activate fonts "in place", which is to activate them from where they are instead of creating copies. Do this by creating a Library Set in Font Book rather than a normal set. Fonts added to a Library Set are activated in place.

Codepage coverting error utf-8 from System codepage to iso-8859-1 (PI 7.1)

Hello Experts,
In our Prcess, we receive an Idoc from an IS-U system and then we send this Idoc with some Header-Information via http-Adapter to a Seeburger System.
In the outbound communication Channel we have a XI Payload manipulation with xml-Code iso-8859-1.
We get the Error: Codepage coverting error utf-8 from System codepage to iso-8859-1, and only for this Idoc, where othe similar Idocs runs correctly.
Is it possible, that the Idoc contains non-utf-8 chars so the error occurs?
PS: another XI in our landscape uses a http-Channel with the same configuration in a similar process, an it work, so guess the Problem is not in the communication channel.
thanks,
best regards

> Is it possible, that the Idoc contains non-utf-8 chars so the error occurs?
A would rather think, that there could be any non-iso-8859-1 character be in the IDoc. For example an czech or polish character.

Unable to read software component versions from System Landscape Directory

Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Bruce

hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Unable to read software component versions from System Landscape

Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
Giang

Hi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri

[Oracle 11G XE and Apex 4.2 ] Backup from System "A", restored in System "B" wont work.

***Backup from System A, restored in System B wont work.***
Hi!
i have a problem, my Apex 4.2 computer/server died, broken motherboard, made me to take the backup files from the HDDs within System A, moved them over to the HDD within System B.
System OS: Win7 Ult 64bit.
1. Installed Oracle 11g XE
2. Installed Java JRE-7 (1.7.0_40)
3. Installed Java Glassfish Server 3.1.2.2 (ogs-3.1.2.2-windows.exe) (Java EE6 Compatible)
4. Run Restore, Succefully Restored. (the Backup is taken from System "A" that worked properly with Apex 4.2 before hardware crash.)
The Result
http://127.0.0.1:8080/apex/f?p=4950
Error Error processing request.
ORA-01403: no data found
OK <-( Button )

then i tryed just this URL -> http://127.0.0.1:8080/apex
it works as it schould.

Hierarchy sync from system to system

Similar Messages

Maybe you are looking for