High level of transactions...

I have an app that will need to support a high-level of concurrency. What aspects should I incorporate in my JDBC code when performing updates to the database?
Thanks in advance!

no. as you can see from what i posted earlier, you can do transactions on a single connections just using jdbc.
ejbs buy you the following:
(1) declarative transactions, where you don't have to embed transactional behavior in your code.
(2) two-phase commit, where more than one database participates in a transaction.
you can do both of these things with Spring and its JTA support, so you don't really need ejbs at all.
%

Similar Messages

  • Sales order display-how to change color of item with high level 0

    Please does anyone know how can i chenge the color of item with high level 0 in display of sales order in red or yellow so it can be seen better for better searching on page?
    thank you in advance...
    regards..

    You'd probably have to do a modification in SD for that. But what you can do, is make the higher level item not changeable. You could also set the display range to UHAU to only see the main items, do this in transaction VOV8. Or you could change your item category in VOV7 only to show main items.
    good luck

  • Errors in the high-level relational engine on Schedule Refresh Correlation ID: 7b159044-c719-41f9-8d0f-da6f73576d6e

    Connections are all valid and work when I setup the Refresh but when the schedule refresh occurs I get this error:
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The remote server returned
    an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote server returned an error:
    (400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
    It is trying to refresh 3 simple tables with less than 9,000 rows each.
    Also, i'd like to add that the refresh works right from excel as well...
    Another fact just in, it seems to work on one out of 3 tables sometimes, so first table gets a success on the log, but sometimes it fails (It succeed twice and failed once with the above error).  The second table never succeeds and gets the error above. 
    The 3rd table never even gets attempted.
    Am I running into some sort of timeout perhaps?
    loading
    Failure
    Correlation ID:
    7b159044-c719-41f9-8d0f-da6f73576d6e
    04/01/2015
    at 01:50 AM
    04/01/2015
    at 01:53 AM
     00:03:14
      Power Query - Sendout_Records Not tried
      Power Query - Positions Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The
    remote server returned an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote
    server returned an error: (400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed. 
      Power Query - Position_Activities Success.

    This is not because of the number of rows, instead its the execution time. The query takes more than 7 mins to execute and seems this fails the refresh process.
    Thank You

  • HU03 going to short dump for handling unit which has higher level handling

    Hi,
    I am ABAPer, i working on issue, HU03 is gong to short dump. i dubug the t code and find out that particular handling unit has higher level handling unit. I checked another handling unit which won't had higher level handling unit, that time it's not giving dump.
    Note: in HU03 T CODE, function module V51P_HU_CONTENS is fetching values. when ever handling unit has higher level handling unit, it's not fetching further values.
    venkey

    Hi,
    Goto NACE transaction code , there you select the application area then  it will give you the list  of output types then select specific output click processing routines then you will see the program name and  script used.
    Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
    Thanks,
    Aditya

  • Multiple Business Partner Selection on Activities trhough higher level

    Dear all,
    During a Business Transaction creation (e.g. activity), we need to find a way to, when checking a higher level of business partners (e.g. organizational unit, position), all the business partners associated to that level will be automatically assigned to the operation as employees responsibles.
    Usually we are using on the access sequence an adaptation of the organization rule "ORGMAN_3" (10000157). However, even when we use our own rule to determine an "Organizational Unit" as "Employee Responsible" (instead of a position that returns the lower lever of employees for selection), the employees associated to that Organization are not assigned to the activity.
    Thanks in advance,
    Joao

    Hi Joao,
       I dont know if you are looking for a check like authorization object.. try to look the authorization object CRM_ORD_LP.
    Regards.
    Manuel

  • High-Level JTS/TopLink design question

    I've gone through the "using JTS with TopLink" docs, and it mostly makes sense. However, I still don't understand how TopLink "knows" when I call acquireUnitOfWork() whether or not I'm participating in a distributed 2PC transaction.
    Said another way:
    Let's say I've got an application based on TopLink (registering appropriate JTS stuff) that exposes an API that can be accessed remotely (RMI, SOAP, whatever).
    And, I've got another, separate application using a different persistence-layer technology (also supporting JTS) that also has an API.
    Now, I create a business method that uses the APIs from both of these applications, and I want them to participate in a single, distributed transaction.
    At a high level (source code is unnecessary), how does that work?
    Would the API need to support an ability to specifiy a TransactionContext or is this all handled behind the scenes by the 2 systems registering with the Transaction Service?
    If this is all handled through registration, how do these 2 systems know that these specific calls are all part of the same XA transaction?

    Nate,
    TopLink particiaptes in JTA/JTS transactions but dows not control them. When you configure TopLink to use the JTA/JTS services of the host application server you are deferring TX control to the J2EE container. TopLink will in this case register each acquired UnitOfWork in the current active TX from the container. The container will also ensure that the JDBC connection provided to TopLink is also bound by the active TX.
    In order to get 2PC you must register multiple resources into the same JTA TX. The TX processing during commit will then make the appropriate call backs to the underlying data source as well as the necessary call backs to listeners suchs as TopLink to have its SQL issued against the database.
    In short: The J2EE container manages the 2PC TX and TopLink is just a participant.
    Doug Clarke

  • What are the steps (High level) needed to implement US Payroll?

    Hi,
    What are the (high level) steps needed to implement US Payroll?
    Please provide any relavent URLs for any steps if possible.
    Thanks,
    Prabakar

    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-PE03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Check Default Payroll Area
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine EE Sub Group Grourping for PCR and Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine Reason for Change
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck Assignment of PayScale Structure to Enterprise Structure
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDetermine Default for PayScale Data
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PaySetup Payroll Period for Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine PayScale Salary ranges
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type Group u201CBasic Payu201D
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Employee Sub Group Grouping for Primary Wage
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Personnel Sub Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionDefine Reason for Change
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type Group u201C Recurring Payments and Deductionu201D
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Personnel Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Define Reasons for Changes
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type Group Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Entry Permissibility for Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    This is not the complete once just for reference purpose i have given it to u
    Edited by: Sikindar on Nov 19, 2008 9:19 AM

  • ME9F generates authorisation High level risks, why?

    Hi All!
    Please, advise why transaction ME9F - Message Output: Purchase Orders generates High level risks with such transactions as
    MK01     Create vendor (Purchasing)
    MK02     Change vendor (Purchasing)
    XK02     Change vendor (centrally)
    MIGO     Goods movement
    ME54     Release Purchase Requisition
    MI04     Enter Inventory Count with Document
    ME28     Release Purchase Order
    etc. As I understand this transsaction is used for view and printing of output. Why such risks as "Enter Purch Agreements & create/modify fictious Vendor " or "Ability to create a purchase contract and release PO" come up?
    In what conditions such risks can be reasonable?
    Thank you

    Looking through really old posts of mine I saw that I had given this question a brain-dead answer years ago. I seriously doubt the poster is still looking for a solution (I certainly hope not) :) Almost assuredly the problem is because of a mismatch in data types. TRUNC(s1.date1,'DD') won't produce a number but rather a date truncated to midnight. TO_CHAR(TRUNC(s1.date1,'DD'), 'DD') will produce a number. It's difficult to tell from the code what the poster is trying to do, so I can't tell if that's the answer.
    P.S. I wasn't actually trying to bring this post to the top of the thread -- I was just editing what was clearly an incorrect answer.
    Edited by: matthew_morris on May 9, 2012 8:31 AM

  • High level process model for a Pulp & Paper Industry

    Hi:
    Someone can help me?, i'm looking for a organizational reference model for a pulp & paper company, under the alignment for best practices in to SAP R/3
    I need know what is the best model for this kind company (chain value, macro process, business process, sub process...)
    Thanks in advance
    Omar Perea

    hi,
    thanks for yor points.
    at that time it was opened.for me also it was warning  the same, any way iam providing some more info on it. pls have a look on it.
    Pulp and paper industry facing IT modernisation needs       
    Today most pulp and paper industry companies face serious financial challenges to increase return on investment and improve capital utilisation.
    Companies are working to improve the efficiency of their supply chains and thereby reduce working capital, increase transaction velocity and improve inventory turnover. Mergers, acquisitions and alliances are reshaping the pulp and paper industry. Although the pulp and paper industry has invested heavily in IT systems, a large variety of old systems is often complex, inflexible in regard to integration and difficult to operate. As they reflect past organisations and business models, the streamlining of business processes is difficult.
    Mega trends in the pulp and paper industry IT.
    The pulp and paper industry is stepping into a new phase of business evolution driven by consolidation of industry, globalisation and ever-increasing competition. These market drivers are forcing the pulp and paper industry to put a greater focus on cost efficiency. These focuses are creating totally new challenges for the organisation, specifically in the IT area.
    IT is increasingly becoming a commodity. This is a result of product standardisation and the popularity of off-the-shelf-products that facilitate the economies of scale. This phenomenon is also supported by increasing utilisation of competence resources in low-cost countries.
    Managing change becomes more and more difficult. Very often companies face the need for new changes before they have seen the benefits of the previous ones. The cycle of change is short and the transformation environment becomes very complicated. On the other hand, IT becomes the tool in forcing business changes to happen. Often the only practical way to roll out new processes and practices is through the modernisation of information systems.
    Like many other industries, the pulp and paper industry is concentrating on providing digitalised self-services as part of their business development.
    Industry background
    Since the consolidation and globalisation of the pulp and paper industry, there has been increasing pressure to continuously improve both its internal and external efficiency. In the large pulp and paper mills, production management systems typically consist of several different systems, which might also be from different suppliers. Systems are often isolated islands, which are successful in managing information of their own area but they lack the comprehensive information exploiting and sharing. This has resulted in a complex and inflexible architecture of legacy systems. These legacy systems are expensive to manage and difficult to develop to meet business requirements.
    This pressure has led to massive IT investments and a continuous rebuild of the IT environments in order to meet efficiency challenges. Although many pulp and paper mills have invested a lot in building up their business supporting IT, especially Enterprise Resource Planning (ERP) systems, the return on investment is often difficult to measure. There is a lot of potential to improve usability of systems by harmonising business processes and integrating the systems more efficiently in order to better support actual business needs.
    Most pulp and paper industry companies have thus come to a point where a more radical rebuild and renewal of the entire IT and network environment is required. Fortunately, the conditions for this have improved over the last few years, due largely to an increasing range of commercially available application platforms adopted for the pulp and paper industry, the acceptance of common industry standards, and the evolution of refined integration and migration methods.
    Renewing and harmonising the company’s operations and IT systems is still, however, a demanding undertaking. Securing continuous operations, while at the same time replacing the core systems and processes, requires a high level of expertise in pulp and paper industry processes and information technology. To complement the in-house competence, the pulp and paper industry will need to establish partnerships with outside solution providers and system integrators. To minimise risks and keep control of business-critical technology, new delivery models will be a necessity.
    i am also  giving some pdf sites pls go thru them
    www.fpl.fs.fed.us/documnts/pdf2000/scott00c.pdf
    www.bfe.admin.ch/php/modules/publikationen/stream.php?extlang=en&name=en_542051780.pdf
    thanks
    karthik

  • Higher level work area

    Hi all,
    I am trying to develop a report on EHS
    in which user give input plant then it shows work area and when user double click on work area it shows higher level work area but in this i am unabel to find higher level work area table where higher level area data is stored so can ant body tell me the table name or field name for higher level work area  .
    Thanks
    Ankit Modi

    Hi again,
    the table TWGLV is also used to store data when defining a product catalog. The field "HigherLev. area" is only used, when you are creating a layout for a product catalog (transaction WWM1). Within this layout, you can build up a hierarchy an therefor, the field you asked for is used.
    The field is not integrated in the layout maintenance when talking about store layouts (with transactions like layout workbench, etc.)
    Regards
    TK

  • HDMI Audio not working on Q190 (along with all higher level Audio Formats)

    Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
    Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

    Hey guys,
    I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
    I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

  • Running a Sub-VI and monitoring data that is generated on a higher level VI

    Hi All, 
    This question must been there before, but I cannot find a suitable answer here on the forums....
    I have a 'top-level' VI that does a lot of things. I also have a sub VI that runs a frequency sweep on a piece of equipment. This is done with a for loop. 
    Problem: 
    I want to monitor/access the data that is generated in the for loop (See attached, the 3 wires within the green circle I want to monitor). 
    2 Questions:
    How can I access the data on the wires (within the loop) from a higher level VI?
    How can I then run this VI in a higher level VI while the higher level VI is continuing and not waiting for the sub-VI to complete?
    I tried using a Que but I cannot seem to get that working. 
    Any suggestions?
    Regards,
    Attachments:
    LV problem.PNG ‏44 KB

    The queue is a good way to move data from a running subVI to another VI.  Your problem is that if the subVI is inside a loop in the main VI, that loop in the main VI cannot iterate until the subVI completes. The solution: have the sub VI running in parallel - not inside - the loop.
    Look at the Producer/Consumer Design Patterns (at File >> New... >> VI >> From Template >> Frameworks >> Design Patterns >> Producer/Consumer.  This may be more than you need at the moment but will show how the parallel code process works.
    Lynn

  • Basic  XML Publisher Question: How to access tags in the higher levels?

    Hi All,
    We have a basic question in XML Publisher.
    We have a xml hierarchy like below:
    <CD_CATALOG>
    <CATALOG>
    <CAT_NAME> CATALOG 1</CAT_NAME>
    <CD>
    <TITLE>TITLE1 </TITLE>
    <ARTIST>ARTIST1 </ARTIST>
    </CD>
    <CD>
    <TITLE> TITLE2</TITLE>
    <ARTIST>ARTIST2 </ARTIST>
    </CD>
    </CATALOG>
    <CATALOG>
    <CAT_NAME> CATALOG 2</CAT_NAME>
    <CD>
    <TITLE>TITLE3 </TITLE>
    <ARTIST>ARTIST3 </ARTIST>
    </CD>
    <CD>
    <TITLE> TITLE4</TITLE>
    <ARTIST>ARTIST4 </ARTIST>
    </CD>
    </CATALOG>
    </CD_CATALOG>
    We need to create a report like below:
    CATALOG_NAME     CD_TITLE     CD_ARTISTCATALOG 1     TITLE1     ARTIST1
    CATALOG 1     TITLE2     ARTIST2
    CATALOG 2     TITLE3     ARTIST3
    CATALOG 2     TITLE4     ARTIST4
    So we have to loop at the level of <CD> using for-each CD. But when we are inside this loop, we cannot access the value of CAT_NAME which is at a higher level.
    How can we solve this?
    Right now, we are using the work-around of set_variable and get_Variable. We are setting the value of CAT_NAME inside an outer loop, and using it inside the inner loop using get_variable.
    Is this the proper way to do this or are there better ways to do this? We are running into troubles when the data is inside tables.

    you can use
    <?../CAT_NAME?>copy past to your template
    <?for-each:CD?> <?../CAT_NAME?> <?TITLE?> <?ARTIST?> <?end for-each?>

  • Where can I find various high level examples of workflows being used

    I am about to start a project with TCS 3.5 and have been participating in the Adobe webinars to help learn components and specific techniques but what I am lacking is an understanding of various workflows I can model my project after or take bits from various sources. Why start with Framemaker in this workflow versus RoboHelp or even Word? Questions like this I think come from experience with the process and I am thinking that what I am getting myself into is a chessgame with all these pieces and don't want to paint myself into a corner by traveling down one route. I have seen this graphic:
    And this one:
    And this one:
    But they are too generic and do not contain enough information to really understand the descision making process one must go through on various projects.
    Can we have a series of webinars made, all with the underlining theme of defining a working process or workflow, by having guests describe how they have or are using this suite in real life on their own projects? One that might include a graphic showing the routes taken through the suite with reasons why?
    My project hopes to make a single source internal site that will tie together various 3D portable industrial coordinate metrology systems (hardware and software). It would be used as a dispersal site for help, communications between users and SME, OEM information, QA requirements, established processes, scripting snipet downloads, statistics, and training (including SOJT). Portable industrial metrology has 8 different softwares that are used and right now about 8 different instruments. These include laser trackers and radars, articulated arms, scanners, structered white and blue light to name a few. The softwares include Spatial Analyzer, Veriserf, CompIT, eMscon, AXYZ to a few there as well. I want to be able to participate and add content to an internal Sharpoint site, push content to users for stand-alone workstations, ePub, capture knowledge leaving the company through attrition, develop easy graphic rich job aid sheets, and aid in evaluations of emergent software and hardware. I would also like to leave the option open to use the finished product as a rosetta stone like translator between the software packages; doing this is the equivelent of doing this in these other software pacages for example.

    PDF is definately a format I want to include, to collaborate with other divisions and SME for one reason, but also for the ease in including 3D interactive target models with in it and portability. I plan on being able to provide individual PDFs that are very specific in their topics and to also use them to disperse user guides, cheat sheets or job aids... something the user may want to laminate on their own and keep with them for reference, printed out. Discussion in these sheets would be drasticly reduced to only the elements, relying heavely on bullet points or steps, usfull graphs, charts and tables... and of course illustrative images. I am thinking that these should be downloadable buttons to print on each topic section, not in a general apendix or such. They would hopefully be limited to one page, double sided 8x10.
    The cheet sheet would have a simplistic flow chart of how or where this specific topic fits in the bigger picture,
    The basic steps,
    Illustrations, equipment, setup
    Software settings for various situations in a table or chart,
    Typical result graph to judge with,
    Applicable QA, FAA regulation settings or concerns,
    Troubleshooting table,
    Topic SME contact info
    On the back, a screen shot infographic of software process
    The trouble here is that I have read that FM has a problem sometimes in succesfully transfering highly structured or formatted material to RoboHelp. Does this then mean that I would take it from FM straight to PDF?
    Our OEM material is very high level stuff... basicly for engineers and not shop floor users... but that is not to say they don't have some good material that could be useful. Our internal content is spread out across many different divisions and continents, with various ways of saying the same thing. This leads QA to interpret the information differently depending where the systems are put to work. We also have FAA requirements that need to be addressed and reminded to the user.
    Our company is starting to also see an exodus of the most knowledagble of the users through retirement. Capturing the knowledge and soft skill packages they have developed working here for 20-30 years is something I am really struggling with. I have only come up with two ideas so far:
    Internal User Web based Forum
    Interviews (some SMEs do not want to make the effort in transfering knowledge by participating in anything if it requires an effort they don't see of benefit to themseleves), to get video, audio or transcription records

  • Assign a Position in CRM to an Organization Unit at a higher level.

    Hi,
    While configuring the Organizational Management in CRM 5.1, I have copied the sales areas created in ECC to CRM.
    The resulting structure is a freely definable Org Unit at the top level called Sales Area (as is was created in ECC) and under that all the Sales Organizations are existing.
    I need to create positions for the Sales Organizations and assign employees to these positions created.
    As per our client requirement, I need to create the positions at the higher level (probably the Org unit level) and assign the employees to these positions created.
    The reason for doing this is that the same employees work across different Sales Orgs.
    Is it possible to create the positions at the highest level so that they can be inherited by the Sales Orgs defined below or do i need to create the positions and the employees separately for each Sales Org.
    I would appreciate if you could answer at the earliest. I need to complete the configuration at the earliest.
    warm regards,
    Rohan Bhate

    Hello,
    Try this SAP CRM: Webclient UI - Framework for this kind of question.
    Regards,
    Fred

Maybe you are looking for