Highlight areas on a graph

Hi...
I'd like to highlight specific areas on my 2d graphs. Ideally, i want to draw a semi-transparent area around a mapped point (to show error and certainty). If I could draw an oval and shade it in, that would be perfect.
So far, i've only found transparencies in CNiGraph3D .... and I havent found anything on coloring in plotted areas.
Any ideas?
-Ryan
=)

Hi Ryan,
I believe what you are looking for are called Annotations. Annotations are used to highlight a point or a region on the graph. There are pointAnnotations where you can highlight a single point on the graph, and also RangeAnnotations where a range of values can be highlighted.
If you are using Visual Studio.NET then you should be able to right click on the graph and select the option "Edit Annotations". Else if you are using Visual Studio 6.0 then you should be able to right click on the graph and select properties; and one of the properties should be "Annotations".
Hope this helps!
Sijink
National Instruments

Similar Messages

  • I add more highlighted areas to my form how do I save it so it shows up when some downloads it from my website

    I add more highlighted areas to my form how do I save it so it shows up when some downloads it from my website

    When you say freeze, how long for? The Finder may just be temporarily bogged down and unresponsive. If I had the time and I was you I'd just leave it overnight to see how things go.
    If not you may have to boot in via the CLI and do things from there. This is something I can't help with though I'm sure someone will chime in with some info.

  • FaceTime bright highlights are overexposed.  How to fix this on my iMac with Lion.?

    FaceTime bright highlights are blown out, overexposed.  How to fix this on my iMac with Lion? 

    If restarting doesn't fix, use the relevant suggestions from Apple's How to Troubleshoot iSight.  If nothing else there works, the repair by an Apple-Authorized Service Provider suggested there and by spudnuty will get it sorted.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.10

  • %Highlight% area of Custom Menu - Display only?

    I'm experimenting with Custom Menus and had a question about the Highlight area of the custom menu.  I have created another template that pops up when a selection is made along the left side of the custom menu.  On the EV_Default tab, I put the path to this template in the column with the header "P1".  If I designate the action "Openlocalfile", the new template opens outside of the custom menu and the links on that template work (it's linked to various .PDF's).  When I designate the same file with the action "Highlight", the template appears on the right side within the custom menu, which I prefer, however my links longer work. 
    Is the Highlight area essentially a "read only" or "view only" area?

    Hi,
    What I have understood from my experience is that we cannot do anything in the highlight area.
    Hope this helps.

  • How can I highlight areas of text that I've downloaded?

    This has just got to be easy . . . am I missing something obvious?
    If I've downloaded a document from the internet for my own reference, and I want to highlight areas of text, how can I do that without buying an app>
    MacBook Air
    Version 10.8.2
    Safari
    Version 6.0.1

    A .pdf document.
    Let me give you an example . . . an article that I'd like to share with a family member and call attention to (highlight) a few words of the text.
    Message was edited by: ApostrapheS

  • Highlights are rendered unevenly, in LR4.1 and in outputs

    I am using LR 4.1 on a Mac with OS 10.6.8, and my highlights are showing banding or steps in the highlights as they gradate from bright to pure white. Seems to happen no matter which camera was used. Also, tiffs and jpegs output from the raw file exhibit the same banding. I do not remember this being an issue in LR 3.6 which I just upgraded from, but when I just now opened the same image in LR 3.6 I see the same problem. I just upgraded the OS before installing LR 4.1. Could the new OS be the problem? Is there a known issue with this in LR4? The only local adjustment I have made is spot removal.
    If there is a thread on this already, please direct me to it. I searched and did not find one.
    Thanks,
    Jerry Mann

    Hi Rikk, thanks for the reply.
    I am on an iMac, this one here:
    http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.4-20-inch-aluminum-earl y-2008-penryn-specs.html
    From my system profiler:
    ATI Radeon HD 2400 XT
    iMac Display:
    Resolution:
    1680 x 1050
      Pixel Depth:
    32-Bit Color (ARGB8888)
    Hmmm, is that "32-Bit Color Pixel Depth" a problem with LR4 having that 64-bit spec?
    I calibrate my monitor manually using Apple's procedure.
    Jerry

  • Calculate area under XY graph

    Hello to all, I am plotting the data acquired from the system as amplitude v/s time on XY graph. My task is to calculate are under the graph and am using integrator tool to achieve this. However, feel that am not using correctly as answer is not matching with expected value. For example, I have plotted y=x function and as per the definition area is equal to 0.5*height*base for area under the graph. It is not matching, kindly help as I want to find out area under the curve for any two points of X-axis.
    Attachments:
    xy-graph.vi ‏22 KB

    The integration gets accurate in your case if you change the integration method to 'trapezoidal' instead of the default 'Simpson's Rule'.
    Simpson's Rule probably doesnt work because you don't provide suitable Initial and Final conditions. This method needs an assumption about the borders of the integration interval.
    Cheers
    Edgar

  • Calculate area under the graph

    Hi
    I need to calculate area under the graph, but really have no idea.
    Anyone could give me some idea please.
    Merci.
    Solved!
    Go to Solution.
    Attachments:
    Graph PV.JPG ‏35 KB

    I don't know whether the example CC attached in this thread will help you or not. Please go through it.
    Start your own program. Whenever you stuck up at any point, post here. Genius people around the forum here will surely guide you to proceed further. don't worry.
    Enjoy wiring.
    Mathan
    Message Edited by mathan on 03-16-2009 05:33 AM

  • Showing highlight areas in Curves other than with mouse

    I want to set the highlight and shadow sliders in Curves but am finding the mouse a pain to use because it is not sensitive enough. When trying to set the shadow slider to just under the darkest region (no clipping), I typically do this:
    1. Option-Click the black slider and drag it to the right until the shadow detail appears.
    2. Back off until it disappears.
    Trying to do that with a mouse is fiddly, not helped by the hysteresis in the system. Say the first shadow detail appears at level 15. When you reverse and go to 14, the shadow detail increases. That is another pain.
    Anyway, I'd like a method that uses the arrow keys to show me the shadow and highlight areas.
    Am I in luck?

    If your just using a curves adjustment, not a curves adjustment layer, then
    you can check the Show Clipping box, click on either the highlight or shadows
    slider, highlight the numbers in the box and use the arrow keys.
    With the new style adjustment layer panel, that doesn't seem possible.
    What you could do is record an action making a new curves adjustment layer
    and make sure the show dialog is on.
    This will get you the old style curves adjustment layer dialog which works like the
    regular curves dialog as above.
    MTSTUNER

  • ICal highlights are too light

    Apple, please provide an option to change the highlights for "Today" and the selected day. The current highlight are nearly invisible and indistinguishable. I can't imagine it would be much effort to allow user selectable colors.

    yes, thanks... i have done that... i had searched here for info on iCal and other calendaring programs since i've been looking into calendaring programs in the workplace... since i had found fairly little on this subject, i thought i'd just share some observations, if someone else comes here searching for such info...
    also i've gone to the apple store to see if someone there could help out with the program and to see the changes to the next version. it's a small datapoint, but there was very little knowledge amoung the store employees. only 2 people had really used it and they were confused about how to do some relatively simple things...
    i think iCal has some growing pains to get to the usability of other apple programs, like their mail reader... but i do think they are doing a good job, nonetheless... all the development for the iphone and all the other fronts they are working on is very challenging... so i'm keeping my figers crossed that they can continue to improve iCal along with everythign else...
    thanks again for your note-

  • Invisible Text in fields after highlights are deactivated

    Completed fields in the sent adobe form are invisible.  I have deactivated the highlighted field as instructed but the completed fields stay invisible.  If I were to type a character in the field, the information in that field will stay visible.  As the forms have confidential information I cannot sent them for samplings.  Any suggestions?

    Unless you can verify what caused the problem, I would go with the most common cause of this issue which is Apple's Preview program.
    There have been a couple of scripts that can repair the form have been posted and are a free download.
    One could also export the data to an FDF file and them import that exported data into a good copy of the form.

  • Want to select a non rectangular area in xy graph( ellipse, oval)

    I have a xy graph that is the combination of 1 histogram in the x plane and a different histogram in the y plane.  I would like to be able to draw a shape  around the resulting smear to be able to see how many events occured in this area of interest.  I can get close with 2 cursors, but my application requires to be a tighter fit.
    Thanks,
    kubs23

    Here's an idea:
    Draw the ellipse on top of the graph using the plot image feature. Here are some references.
    How to draw on top of an xy graphs: http://forums.ni.com/ni/board/message?board.id=170&message.id=202702#M202702
    (Instead of cursor positions, use mouse-down and mouse-move events.  Of course an ellipse has more degrees of freedom, so you need extra inputs to e.g. set the excentricity, or keep that fixed at e.g. 3:1.). Now just draw an ellipse between the mouse-down and mouse-move coordinates which has the major axis connecting the two points.
    How to draw a rotated ellipse (see attached, modified from: http://forums.ni.com/ni/board/message?board.id=170&message.id=140604#M140604).
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    Ellipse3.vi ‏36 KB

  • Blue highlighted areas are printing with a blue background

    when I highlight a certain section to copy, instead of printing section normally, it's prints it with a blue background.  Is this
    a printer problem or computer  problem.  It only started doing this in the last 2 days, before that it was fine.

    Please read this post then provide some details.  What printer model? What operating system? What program are you printing from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Error Bars are essential on Graphs -- how do we make them animate?

    I give a lot of talks with data, and have to have error bars. Is there anyway to animate data and show error bars? The animated graphs are very sexy but without error bars i can't use them ;(

    I wouldn't count on anyone official at Apple reading the forums -- if you want to request a feature I'd do it at the Keynote feedback page.

  • Annotations and highlights are not showing up. Are they lost?

    I made a ton of annotations and highlight on my ereader through digital editions, and now they aren't showing up anywhere. Help!

    By "server" you mean "Testing Server"?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Randy Edmunds" <[email protected]> wrote in
    message
    news:ea5e04$bff$[email protected]..
    > If you have a server defined for your DW site, the
    Preview in Browser
    > (F12) uses your server to preview your pages. In this
    case, it uses the
    > dependent files (such as images) on your server, not
    your local machine.
    > If this is the case, then upload the images to your
    server.
    >
    > HTH,
    > Randy
    >
    >
    >> ok, when i hit F12 my pictures and my graffics are
    not showing up in IE
    >> browser (some of my large fonts show up but not
    all). I had no problem
    >> with this before earlier today. I tried to download
    my site, had a
    >> problem and I must've turned something off and
    that's why I am having a
    >> problem with pictures showing up in IE. You can see
    the "Draw layer" box
    >> but no picture. Can anyone help?

Maybe you are looking for

  • IWeb quit unexpectedly while using the SFWordprocessing plugin after 10.6.6

    installed snow leopard OS X 10.6.6 so I could run Pixelmator. opened up iWeb and was tooling around with a 2nd website as to not alter my current website. I added in a imovie and played around with a pg before closing, pretty sure I did not save it j

  • Why can't I use the word "faces" in my url-mapping?

    I am trying to get a servlet to work for the url /faces/inloggen but I cannot get it to work. Anything without the word faces in it will work. I simply want this tag to work:     <servlet-mapping>         <servlet-name>LoginServlet</servlet-name>    

  • Video Playback in IE

    Hi Everyone, I'm new to Flash and am also experimenting with a Flash Media Streaming Server. I am trying to get video streaming to work with my new website, and the video so far plays great with no problems in web browsers such as Firefox/Safari, etc

  • Link in PDF doc need to open in a new browser window

    I am using Adobe Pro 7.0, and in the PDF that someone opens, I want links, but when a user clicks on the link, I dont want them to click and have the link open in the same window, and replace the PDF they are viewing. Please advise on how to open a l

  • Using firewire to install Classic 9.2.2

    I had the instructions for transferring Classic from one Mac to another using a firewire cable, but lost them. I remember setting up 1 computer in target mode, but can't figure out the rest. I want to transfer Classic from my miniMac to a new G4 iBoo