History of changing of Work Instructions

About using of Work Instructions during tracking of SFCs there is a history available.
What we need is to have history about creating and changing of Work Instructions. At least we have to know who has created or changed when which Work Instruction. I did not find anything in SAP ME and also not in database about history of changing of Work Instructions.
Is there really nothing in place? When we are audited by a customer history of Work Instructions is a typical question.

Hello,
There is Audit Log functionality in ME. The changes to objects definitions are stored in AL_ tables in ODS. There is also audit log report for this purpose:
http://help.sap.com/saphelp_me52/helpdata/en/7d/d26be81f8748c4b3e6b7a3ffc4d278/frameset.htm
Regards,
Konstantin

Similar Messages

Automatic change of Work Center during Confirmation.

Happy New Year to all!
Just want to ask if anyone of you encountered the scenario during confirmation in which the backflushed work center was changed. The user claims that they did not do any changes during confirmation nor did they change manually the order itself. The confirmation happened last December and they only noticed it this month when they were checking the reports.
I did not configure their system so that they can change the Work Center during confirmation. By default, the work center is grayed out during confirmation.
Hope to hear from some of you soon!
Thanks and regards,
jLmendoza
Edited by: John Luis Mendoza on Jan 4, 2011 3:15 AM

Dear
If your production order operations are re-scheuled and dispatched after Capacity Avalaiblity check in cm21/cm22/cm31 etc , then during the dispatch of operation , you have option to change Work Cnetre , time , date based on the selection option in Startgy profile (CM31/CM21-Enter the WORK CENTRE /Order ) and check wether work centre is changed.
One more option may be in Order Change in CO02-Operation Overview -Operation -Work centre -Here user may change the Work Centre .
If you have Order Change management active then you can trace the same .
Refer : Production order change history
Otherwise , there is not such confirguration in SPRO where work centre can be changed automatrically during confirmaiton because it will grade out based on the ste of confirmaiton default screen in OP00.
Hope it clarifies
Regards
JH

Recover erased photos or find a history of changes?

Hi - I used Dup Finder (plugin) to find duplicate pictures in my LR catalog. I then erased them through Lightroom. what I didn't realize is that Dup Finder puts both the otiginal file and the duplicate in a smart collection. I errased everything from that folder, so now I have missing photos and I don't know all the file names. Is there any way to recover these photos or at the very least find a history of changed to a catalog or collection (I have online backups of my photos, so if I know the file name, I can get them). THANKS!

Oh dear, definitely worth reading the instructions in future.
Do you have a backup catalog that had all of the duplicate photos? If so, you could run the duplicate finder plug-in on a copy of the backup catalog, and then you'd have a list of the missing photos.

Source Control 3.1 : History and change reports

Robo Source Control 3.1 : History and change reports are allways empty. I only see titles on the file report.htm (using IE9 or Google Chrome).

What I was saying in your other post was not necessarily that it will work differently on a 64 bit machine, simply that there were known issues with a 64 bit machine that are referenced in
http://blogs.adobe.com/techcomm/2011/12/robohelp-9-0-2-is-now-available.html
It may be the fix referred to there is simply to make it work the same way as on a 32 bit machine and clearly that is giving you grief. Only way way to find out.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Changing operations work center during creation of PM order

Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
Assaf

Assaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

How can I add/change art work to albums where the art work isn't available at iTunes?

How can I add/change art work to albums where the art work isn't available at iTunes?

Go to google and search for the artwork. When you find it, save it to your computer. Right click the album and select get info. Drag the image you saved to the empty box for album art.

Changing default Work Center during CATS time entry

Hi Folks,
I am hoping someone here can throw some expert advice.
Currently during time entry in CATS, we have Work Center coming in from the Work Order. Its getting defaulted without any option to change it. Business here has a need to change it. I have llooked into the CATS profile to see if there is a place that enable the WC to be defaulted.
In Transaction CAC1, there is a section that shows what fields are being defaulted during CAT2 time entry. However I do not see the Work Center as one of the option there.
Can any one help?
In short, where do we disable the defaulting of the WC from the Word Order during time entry?
Thanks in advance.

Hi,
Adding to what Kapil said; if the work centre is a grayed out in time shet screen then you can go to CAC2 transaction and make it editable. By this way users will be able to change the work centre on screen.
Regards
Sreekanth

My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

History of changes in BPM Composer

Hi!!!
Does any body knows if it is posible to see the history of changes done in a process in BPM Composer? The information that I want to see is which changes where done by a specific user? When? Like an audit trail of the changes done in a process...
Thanks a lot!
Ana

Hi Husain!
Could you tell me in which page or menu I can see that info?
Thanks!

Change in Work item Text for Approval Workflow WS14000133

Hi,
I need to change the work item text for Shopping Cart Approval Workflow WS14000133.
I have created an Attribute in Business Object BUS2121 and called the same attribute in work item text.
In PFTC -> Redefine Work item text - > and i have defined the work item text as well called the attribute from the container.
what the problem over here is - when I am passing the attribute in the work item text in the task, I am unable to see the work item text with the Dynamic Attribute but I am able to see the work item alone (not with the Dynamic attribut)
But when i debug the workflow from SWI1 then i can see the dynamic attribute in the Container of the workflow but nt in the approver's inbox in portal..
Can you please tell me - that why is this a strange behaviour that i can see the Dynamic attributed created initially in the workflow container of the Business Object but nt in the Approvers inbox either in Backend nor in the front end...
Thanks,

Hi,
Maybe this SAP note/KBA will help :
1470761 - How to change the text of the SRM approval links in inbox or UWL
Kind regards,
Siobhan

How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

Question
How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

'''IT'S A EASY AS IT SHOULD BE.'''
This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
# If you haven't already, open a bunch of tabs on a few different subjects.
# Click the List All Tabs button on the right side of the tab strip.
# Select Tab Groups.
# Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
# Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
#A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
# Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
# Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
# DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
# Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
# So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

Work Instructions in Adobe

I use Adobe Acrobat 9 Pro Extended on a regular basis but not in much depth. Much of it includes converting 3D model files into pdfs since they are more readily viewable. I've read a little about some of the more powerful tools and was wondering if someone might provide a little feedback about work instructions.
From what I can tell, Acrobat can be used to create forms that can be shared/modified real-time by any number of users (linked via a common network or sharepoint). I would be designing a form with data fields and possibly 3D models (to support the instructions to a user). My impression is that I would first design this in Word and then convert it to a pdf. I'm wondering how difficult it would be to integrate the information with a database and how robust this might be.
Does anyone have any experience with this and/or any links that might be helpful.
Thanks.

What you have highlighted in your post will, likely, tap in use of SDKs, Acrobat Javascript, IAC, and form(s) creation/maintenance.
fwiw - some additional resources for these are:
The Acrobat SDK Forum
http://forums.adobe.com/community/acrobat/acrobat_sdk?view=discussions
The Acrobat Scripting Forum
http://forums.adobe.com/community/acrobat/acrobat_scripting?view=discussions
The Acrobat 3D Features Forum
http://forums.adobe.com/community/acrobat/acrobat_3d_features?view=discussions
And, at the Acrobat User Community:
http://acrobatusers.com/forums/aucbb/
The Forums for "3D", JavaScript, Forms: Acrobat, Forms: LiveCycle Designer
Of course, the Acrobat Developer Center
http://www.adobe.com/devnet/acrobat/
where documentation and other useful information is available.
And last but not least: Adobe TV's Acrobat "Product Channel".
http://tv.adobe.com/product/acrobat/
Be well...

2.1 History Shorcut Keys not working

Hi,
When I try to retrieve statements stored SQL-history using shortcut keys nothing happens.
I tried Ctrl-Shift-Down, Ctrl-Shift-Up, Ctrl-Down and Ctrl-Up but in SQL-worksheet but nothing happens.
I even defined new shortcuts also to no avail.
Does anybody else face this problem?
Regards
Ernst

Logged
Bug 9238928 - otn: sql history shorcut keys not working
-Raghu

History of changing of Work Instructions

Similar Messages

Maybe you are looking for