HLM installation error. Invalid values for --certificates_hostmap option. Specified key Hostname is not valid hdbhost

Hi everyone,
I'm installing SAP HANA for the first time and im having troubles when the unified installer gets to the installation of the lifecycle manager. Im getting the following error:
15:08:33.996 - INFO:   Calling postCheck event handler
15:08:33.996 - INFO:     Invalid values for --certificates_hostmap option. Specified key 'RCNHANA' is not valid hdbhost
15:08:33.996 - ERR :     Invalid values for --certificates_hostmap option. Specified key 'RCNHANA' is not valid hdbhost
15:08:33.997 - ERR :     Cannot execute custom event postCheck: Invalid values for --certificates_hostmap option. Specified key 'hostname' is not valid hdbhost at HLM/Installer/BaseExecutionPlanManager.pm line 90
Can anyone help me
Thanks

Thanks Slds.
I just re-ran the HLM package using the following procedure:
1) download SAPHANALM06_0-10012745.SAR
2) copy SAPHANALM06_0-10012745.SAR to the /tmp/hanainstdir/hlm_install
3) Ensure SAPHOSTAGENT is above level 149, advisable to update it to the latest level. Level 153 till today.
4) go to the extracted temp directory and run ./hdbinst
Just click enter when prompt if you are running single Hana Database.
SAP HANA Lifecycle Manager Installation kit detected.
SAP HANA Database Installation Manager - SAP HANA HLM Installation 1.50.00.000000
Options:
SAP HANA system ID | Description
SID | SAP HANA Database SID 1.00.57.378530
Enter SAP HANA system ID [SID]:
Root user password (SSH connectivity):
Root user SSH key passphrase (SSH connectivity):
Installation was successful. However, I noticed in the log that this time --certificates_hostmap option was not set to any value at all, but still installation went tru fine.
Thanks
Raj

Similar Messages

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

Invalid value for parameter error when value is in list of allowed parameters

I have some documents with a lot of paragraph styles that have been organized into groups. I have a simple script that is meant to ungroup these styles and delete the now-empty groups.
Code:
#target indesign
var myDoc = app.activeDocument;
if (myDoc.paragraphStyleGroups.length > 0)
myDoc.paragraphStyleGroups.everyItem().paragraphStyles.everyItem().move(LocationOptions.AT_END, myDoc);
myDoc.paragraphStyleGroups.everyItem().remove();
alert("Done")
The error I receive is (emphasis mine):
JavaScript Error!
Error Number: 30477
Error String: Invalid value for parameter 'reference' of method 'move'. Expected ParagraphStyle, ParagraphStyleGroup, CharacterStyle, CharacterStyleGroup, CellStyle, CellStyleGroup, TableStyle, TableStyleGroup, Document or Application, but received Document.
As you can see, my pickle is that my value is of an allowed type. This only happens in some documents, and there's nothing that obviously distinguishes those documents from the ones in which it works.
One thing I've noticed is that the error sometimes takes a while to appear (a minute or so), but none of the styles have been moved once I click OK. So, I don't know if it's specific to one style. I doubt it, only because other documents with the same style set work.
Can anyone shed any light on what this error could mean in this context? I definitely have an activeDocument, so what could cause a Document to not be a Document?
Any help much appreciated!

Hi,
It occurs when 2 or more styles have the same name, probably.
Jarek

MaxDB (7.8.02.27) installation error: Invalid parameter Data Volumes

Hi all,
i get errors during installation procedure of MaxDB 7.8.02.27 at the point where i define the Database Volume paths (step 4b).
If i use the default values the database gets created without errors.
But if i do changes e.g. to the size of the data volume, the error appears when i click next:
"Invalid value for data volume size: data size of 0KB does not make sense Specify useful sizes for your log volumes".
If i create 2 data files with different names (DISKD0001, DISKD0002), i get an error mesage that i have used one filename twice.
Now its getting strange: If i use the previous button to move one step back and then use the next button again, it sometimes
accepts the settings and i´m able to start the installation and the database gets created.
I´m remote on a VMWare server 2008 R2 (EN) and i´m using the x64 package of MaxDB.
Any ideas?
Thanks
Martin Schneider

Hi Martin,
A general system error occurrs if file *.vmdk is larger than the maximum size supported ... It has to be replaced with the nearest acceptable value associated with the various block sizes so that you can use to create a datastore.
You may need to resize your block size while choosing VMFS datastore.
Hope this is useful.
Regards,
Deepak Kori

Calling report from FORM - error Invalid value of paramente 'P_YEAR'

Hi guys,
Could you please help me to figure out what is going wrong
with my form which run a report?
I am using Developer suite 10g.
when i run report from report application it run fine,
but when i call that report from a form it gives me error.
I have checked the datatype, checked the parameter value
that I assign from form is available in the report parameter value.
What else do i have to check in order to run this report
from the form.
Error Message from Report Queue Manager:
Invalid value for parameter 'P_YEAR'.
Your insight will be appreciated.

Thank you for reply Denis,
Here is the code which run_report from form.
DECLARE
-- variables for running individual reports
report_filename               VARCHAR2(40);
var_reportpath               VARCHAR2(100);
report_otherparms      VARCHAR2(200);
-- variables to keep track of successful reports in silent mode
rep_status                         VARCHAR2(40);
rep_req                                   NUMBER := 0;
rep_count                              NUMBER := 0;
dummy                                        NUMBER;
-- variables to load the report names and checkboxes into the parameter list
pl_id                                        PARAMLIST;
plname                                   VARCHAR2(20) := 'rpt_list';
-- variables to loop through the parameter list and run the reports
i                                                  NUMBER;
split_loc                              NUMBER;
     param_value                         VARCHAR2(40);
     checkbox_name                    VARCHAR2(40);
     report_basename               VARCHAR2(40);
     svc_name                              VARCHAR2(4);
     run_report                         BOOLEAN;
     disp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'DISP',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
hosp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'HOSPICE',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
orth_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'O/P',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
BEGIN
-- Are any reports selected?
IF BOXES_ARE_CHECKED(:System.Cursor_Block,'PRINT_NULL_REPORT') THEN
if not CHECKBOX_CHECKED('print_null_report') then
disp_exist := TRUE;
orth_exist := TRUE;
hosp_exist := TRUE;
end if;
-- Create Report Parameter Listing
pl_id := GET_PARAMETER_LIST(plname);
if NOT ID_NULL(pl_id) then
     DESTROY_PARAMETER_LIST(pl_id);
end if;
pl_id := CREATE_PARAMETER_LIST(plname);
if ID_NULL(pl_id) then
     GENERIC_ALERT('Error creating report listing');
     RAISE Form_Trigger_Failure;
end if;
ADD_PARAMETER(pl_id,'id1', TEXT_PARAMETER,'cover_page_intro!INTRO');
ADD_PARAMETER(pl_id,'id2', TEXT_PARAMETER,'utilization_profile!ALLUTIL');
ADD_PARAMETER(pl_id,'id3', TEXT_PARAMETER,'utilization_summary!ALL_SUMMARY');
ADD_PARAMETER(pl_id,'id4', TEXT_PARAMETER,'hiv_profile!HIV_PROFILE');
ADD_PARAMETER(pl_id,'id5', TEXT_PARAMETER,'wound_care_profile!WOUND_CARE_PROF');
ADD_PARAMETER(pl_id,'id6', TEXT_PARAMETER,'top_10_diagnosis!TOP10DIAG');
ADD_PARAMETER(pl_id,'id7', TEXT_PARAMETER,'diagnosis_profile!DIAG_PROFILE');
ADD_PARAMETER(pl_id,'id8', TEXT_PARAMETER,'physician_profile!PHYS_PROFILE');
ADD_PARAMETER(pl_id,'id9', TEXT_PARAMETER,'physician_specialty!PHYS_SPECIALTY');
ADD_PARAMETER(pl_id,'id10',TEXT_PARAMETER,'discharge_profile!DISCHARGE_PROFILE');
ADD_PARAMETER(pl_id,'id11',TEXT_PARAMETER,'acute_care_discharge!ACUTE_DSCHRG');
ADD_PARAMETER(pl_id,'id12',TEXT_PARAMETER,'excessive_cost_patients!EXCESSIVE_COST');
ADD_PARAMETER(pl_id,'id13',TEXT_PARAMETER,'provider_profile!PROV_PROFILE');
ADD_PARAMETER(pl_id,'id14',TEXT_PARAMETER,'service_profile!SERVICE_PROFILE');
ADD_PARAMETER(pl_id,'id15',TEXT_PARAMETER,'age_gender_profile!AGE_GENDER_PROF');
ADD_PARAMETER(pl_id,'id16',TEXT_PARAMETER,'network_services!NETWORK_SERVICES');
ADD_PARAMETER(pl_id,'id17',TEXT_PARAMETER,'thh_section_header!THH_COVER');
ADD_PARAMETER(pl_id,'id18',TEXT_PARAMETER,'thh_utilization!THH_UTILIZATION');
ADD_PARAMETER(pl_id,'id19',TEXT_PARAMETER,'thh_service_profile!THH_SVC_PROF');
ADD_PARAMETER(pl_id,'id20',TEXT_PARAMETER,'hit_section_header!HIT_COVER');
ADD_PARAMETER(pl_id,'id21',TEXT_PARAMETER,'hit_utilization!HIT_UTILIZATION');
ADD_PARAMETER(pl_id,'id22',TEXT_PARAMETER,'hit_service_profile!HIT_SVC_PROF');
ADD_PARAMETER(pl_id,'id23',TEXT_PARAMETER,'hme_section_header!HME_COVER');
ADD_PARAMETER(pl_id,'id24',TEXT_PARAMETER,'hme_utilization!HME_UTILIZATION');
ADD_PARAMETER(pl_id,'id25',TEXT_PARAMETER,'hme_service_profile!HME_SVC_PROF');
ADD_PARAMETER(pl_id,'id26',TEXT_PARAMETER,'disp_section_header!DISP_COVER');
ADD_PARAMETER(pl_id,'id27',TEXT_PARAMETER,'disp_utilization!DISP_UTILIZATION');
ADD_PARAMETER(pl_id,'id28',TEXT_PARAMETER,'disp_service_profile!DISP_SVC_PROF');
ADD_PARAMETER(pl_id,'id29',TEXT_PARAMETER,'hosp_section_header!HOSP_COVER');
ADD_PARAMETER(pl_id,'id30',TEXT_PARAMETER,'hosp_utilization!HOSP_UTILIZATION');
ADD_PARAMETER(pl_id,'id31',TEXT_PARAMETER,'hosp_service_profile!HOSP_SVC_PROF');
ADD_PARAMETER(pl_id,'id32',TEXT_PARAMETER,'orth_section_header!ORTH_COVER');
ADD_PARAMETER(pl_id,'id33',TEXT_PARAMETER,'orth_utilization!ORTH_UTILIZATION');
ADD_PARAMETER(pl_id,'id34',TEXT_PARAMETER,'orth_service_profile!ORTH_SVC_PROF');
ADD_PARAMETER(pl_id,'id35',TEXT_PARAMETER,'encounter_detail!ENCOUNTER_DETAIL');
--- set up other parameters to send to generate_report
if :reports_control.output_choices = 'FILE' then
var_reportpath := :global.report_directory || :reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
     var_reportpath := var_reportpath || 'q' || :reports_control.quarter_list;
end if;
var_reportpath := var_reportpath || '_G' || :reports_control.group_list || '_';
else
     var_reportpath := '';
end if;
report_otherparms := 'p_year='||:reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
     report_otherparms := report_otherparms || '     p_quarter='||:reports_control.quarter_list;
end if;
report_otherparms := report_otherparms || ' P_REPORTGROUPID='||:reports_control.group_list;
--- Check if reports are checked and submit to Reports Server
     for i in 1..35 loop
          GET_PARAMETER_ATTR(pl_id,'id'||i,dummy,param_value);
          split_loc := instr(param_value,'!');
          checkbox_name := substr(param_value,1,split_loc-1);
          report_basename := substr(param_value,split_loc+1,length(param_value));
if CHECKBOX_CHECKED(checkbox_name) then
     run_report := TRUE;
     svc_name := substr(report_basename,1,4);
     if svc_name = 'DISP' then
          if not disp_exist then
               run_report := FALSE;
          end if;
     elsif svc_name = 'ORTH' then
          if not orth_exist then
               run_report := FALSE;
          end if;
     elsif svc_name = 'HOSP' then
          if not hosp_exist then
               run_report := FALSE;
          end if;
     end if;
     if run_report then
          report_filename := :global.filename_prefix || report_basename || '_10G';---- :global.filename_prefix || report_basename || :global.filename_suffix;
     GENERIC_ALERT(report_filename || ' ' || report_otherparms);
          rep_status := GENERATE_REPORT(report_filename,:reports_control.output_choices,var_reportpath,report_otherparms);
          rep_req := rep_req + 1;
          if rep_status = 'FINISHED' then
               rep_count := rep_count + 1;
          end if;
     end if;
     end if;
     end loop;
-- if we're in silent mode, display a completion message
     if :reports_control.output_choices = 'FILE' and CHECKBOX_CHECKED('chk_silent') then
          SET_ALERT_PROPERTY('REPORT_CREATED',alert_message_text,
     '' || rep_count || ' of ' || rep_req || ' reports created successfully');
          dummy := SHOW_ALERT('REPORT_CREATED');
end if;
ELSE
dummy := SHOW_ALERT('select_report');
END IF;
END;

Invalid value for variable 0calyear in planning modeller

Hi Experts,
I have an urgent requirement. In my planning modeller I have a variable for 0calyear for accepting current year and target year. If I give target year(for example, 2015) which is not present in 0calyear it is showing error that 2015 is an invalid value for 0calyear. If I give 2012 it is working fine because it is already present in 0calyear.
I would like to know how we can solve this issue. To forecast data anyway we have to enter a future year. I would really appreciate if anyone could give some information to solve the issue.
Thanking you,
Jerry.

Hi Jerry,
Just a thought.
Can you load a flat file data with year values into a DSO with 0CALYEAR as key? ( SID generation as active ).
What I am expecting is this flat file load will generate SIDs for 0CALYEAR in future year as well.
Subsequently if you try to enter that in your planning variable it should work.
I understand this is not a perfect solution. But want you to try and adopt if this is a reasonable work around.
Thanks,
Krishnan

SQLJ-JPublisher - J2T-153, Invalid value for -context:while generating the

Hi All,
I am trying to generate the java code for the oracle types defined for one of the module in our project.for that i have defined a new context by extending the 'DefaultContext'
provided by SQLJ and as mentioned in the below URL.
http://docs.oracle.com/cd/A91202_01/901_doc/java.901/a90214/jpub.htm
Topic : JPublisher Generation of SQLJ Classes
MyContext:-
import java.sql.Connection;
import java.sql.SQLException;
import sqlj.runtime.ref.DefaultContext;
public class MyContext extends sqlj.runtime.ref.DefaultContext{
static {
DefaultContext defaultContext = null;
try {
defaultContext = new DefaultContext(<datasource>);
} catch (SQLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
DefaultContext.setDefaultContext(defaultContext);
public MyContext(Connection arg0) throws SQLException {
super(arg0);
public Connection getConnection(){
Connection con = null;
try {
con = <datasource>getConnection();
} catch (SQLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
return con;
JPub command:
jpub -user=usr/pwd -context=com.test.context.MyContext -sql=<My Types Here> -compile=false
I am getting the below error while running the jpub command in dos prompt.
Error Log:
J2T-153, Invalid value for -context: com.test.context.MyContext. This must be set to generated or to DefaultContext.
Please let me know if anybody has come across this problem before.
Thanks,
Vijay
Edited by: 905698 on 03-Jan-2012 09:53

Hi Vijay,
This post DOES NOT correspond to this forum.
The current forum is for BI Publisher. Your question is for JPublisher and believe it corresponds to PL/SQL forums.
Please close the thread
thanks
Jorge

MP4 Video throwing error: Invalid URL for Web Content Overlay

Converted a 15 second flv video to the following using Handbrake:
mp4
H.264 codec
"Placed" mp4 file into my article
Set Autoplay= On and 0.125s delay
Try to preview via InDesign a get the error: Invalid URL for Web Content Overlay
Try to update my article via Folio Builder and I get the same error.

It seems that you "placed" your video into the frame selected as Web Content in Folio Overlays Panel.
Delete that frame.
Place (in the normal InDesign way, not"place") your mp4 file onto the page.
Adjust the size of the frame to your video measurements.
Look at the Folio Overlays Panel. Your placed file should appear ther as Video Overlay.
Set your options and you are done.

Can not read values for profile option proxy_user_id in routine& Routine

Hi all ,
I developed a new form in oracle apps R12 and deployed in respective top ,After entering all the details when i am going to save the data i am getting the message like
Can not read values for profile option proxy_user_id in routine& Routine and no action is taking place .
Can some one please help me how to avoid this issue.
Thanks in advance,
Srinivas

Hi Srinivas,
Please check below Metalink notes. Although it is not same as your issue but it will give you way to enable 'VISIBLE' flag(if not done already)
_'Cannot Read Value For Profile Option Proxy_user_id' Error While Trying To Create an AR Invoice [ID 1280915.1_
Thanks,
JD

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

Set of default values for Select-Options

Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
Karthik

Hi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula

FRM-40212: Invalid value for Field SHIP_TO_ADDRESS1on forms OEXOETEL

I want to customize a form "OEXOETEL". I want to copy some values from another order to a new order.When i navigate to a block LINE i receive this message: "FRM-40212: Invalid value for Field SHIP_TO_ADDRESS1".
cursor c_order(p_header_id varchar2) is
select o.sold_to,
o.order_type,
o.terms,
o.ship_from,
o.SHIP_to_org_id,
o.ship_to_address1,
o.ship_to_address5,
o.customer_number,
o.invoice_to_org_id,
o.INVOICE_TO_LOCATION,
o.SHIP_TO_LOCATION,
o.invoice_to_address1,
o.invoice_to_address5,
o.sold_to_contact
from oe_order_headers_v o,
hz_parties hzp
where hzp.party_name = o.sold_to
and o.header_id = p_header_id;
IF l_block_name IN ('ORDER') THEN
IF p_event = 'WHEN-NEW-RECORD-INSTANCE' THEN
open c_order(name_in('global.header_id'));
loop
     fetch c_order into x_order_row;
exit when c_order%notfound;
     copy(x_order_row.customer_number,'ORDER.CUSTOMER_NUMBER');
     copy(x_order_row.sold_to,'ORDER.SOLD_TO');
copy(x_order_row.ship_to_org_id,'ORDER.SHIP_TO_ORG_ID');
copy(x_order_row.SHIP_TO_LOCATION,'ORDER.SHIP_TO_LOCATION');
     copy(x_order_row.ship_to_address5,'ORDER.SHIP_TO_ADDRESS5');
copy(x_order_row.ship_to_address1,'ORDER.SHIP_TO_ADDRESS1');
copy(x_order_row.ship_to_address1,'ORDER.SHIP_TO_ADDRESS1_MIR2');
     copy(x_order_row.invoice_to_org_id,'ORDER.INVOICE_TO_ORG_ID');
     copy(x_order_row.invoice_TO_LOCATION,'ORDER.INVOICE_TO_LOCATION');
     copy(x_order_row.invoice_to_address5,'ORDER.INVOICE_TO_ADDRESS5');
copy(x_order_row.invoice_to_address1,'ORDER.INVOICE_TO_ADDRESS1');
copy(x_order_row.INVOICE_TO_LOCATION,'ADDRESSES.INVOICE_TO_LOCATION');
     copy(x_order_row.order_type,'ORDER.ORDER_TYPE');
     copy(x_order_row.sold_to_contact,'ORDER.SOLD_TO_CONTACT');
     copy(x_order_row.ship_from,'ORDER.SHIP_FROM');
end loop;
close c_order;
end if;
end if;

Review Note: 302613.1 - OEXOEORD: Cannot select List of Values From The Ship To Address1 Field
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=302613.1

Content generation error: invalid url for web content overlay

Hi,
I am having an error message " content generation error: invalid url for web content overlay" when I want to upload the article.
I don't have any link with that article and this is my 1st time having this kind of error. I am using indesign CC
Please help.
Thanks,
Rush O

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

DMEE: Error in conditions for node Invcr: reference ID IDTP is not permitte

Hi Friends ,
I have problem with nodes in DMEE .
When child node is from a Exit funtion moduel , not from the Payment FPAYH/FPAYP/HX structures, is empty . I dont want the parent node to be displayed .
EX:
<INVCR> -
Should not display when node2 is empty
          <ID> -
empty/or values from Userexit.
I am using No mapping for parent nodes.
trying to give Reference ID for childnode and using it in parent node conditions and i guess using a lower level REFId is not permitted . My DMEE is giving following error.
Error in conditions for node Invcr: reference ID IDTP is not permitted
Message no. DMEE_ABA305
Diagnosis
You have specified type 3 in the conditions, meaning that the argument is a reference ID. Your entry in the argument field, however, is not an existing reference ID.
I did define the Reference NODE ID ,ID

Hello Srikanth,
The problem is with the semantics of the code you are writing.
Refer to the following code to get Account ID from the value node:
data: lv_account type string.
    lv_account = lv_value_node->get_property_as_string( iv_attr_name = 'ACCOUNT_ID' ).
or
data: lv_account type bu_partner.
CALL METHOD lr_value_node->get_property_as_value
    EXPORTING
      iv_attr_name = 'ACCOUNT_ID'                            "#EC NOTEXT
    IMPORTING
      ev_result    = lv_account.
I hope this helps.
Thanks
Vishal

HLM installation error. Invalid values for --certificates_hostmap option. Specified key Hostname is not valid hdbhost

Similar Messages

Maybe you are looking for