Home sharing -- need to split into separate accts

My 2 kids and I have home sharing but I want to split this into 3 separate accts but don't want to re-buy all of the songs for each kid. Help, how do I accomplish this? Thanks.

I've been reading for hours & am only more confused. I hope someone can help me sort it all out!
First, I have a new iPhone 5s & new SIM card. I backed up my iPhone 4s & restored the info on the 5s.
My husband lost his iPhone & is taking over my iPhone 4s. He was sent a new SIM card.
I do not know how to set up the 4s phone for him & need advice!
Correct me if this is wrong, but we can have the same Apple ID--this will enable him access to all music & apps purchases? On the iphone 4s I changed to his email address & left my Apple ID for itunes & apps. When I tried to change the iCloud ID, it would not take it. Also when I tried to change the iMessage ID a message came up that if I deleted mine, I would not be able to receive iMessages on any device & I also have an iPad).
Would someone please tell me, in simple terms, the best way to set up my iPhone 4S so that my husband can have his own Mail, contacts, messages, etc & still be able to have access to my apps?.
I greatly appreciate any help I can get!

Similar Messages

Got a new computer, did the home sharing, downloaded all tunes into new laptop but not all of the songs can be played now

as said above..New laptop, downloaded Itunes. Home shared, downloaded all tunes into new Itunes butalthough they are there some are greyed out and will not play. How do i fix this ?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Reg:I have GL a/c no one i need to split into 3 GL a/c no

I have GL a/c no one i need to split into 3 GL a/c no
1) First one is opening stock some restriction (like Business Transaction Sum total of all the business transaction for last period selected - (sum total of all debits - sum total of credits), when transaction type = RMWE + (sum total of all debits - sum total of credits), when transaction type = RMRU, RMWA, RMWL)
2) Second (First +1) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
3) Third (First +2) one is issue some restriction (Sum total of All debits - Sum total of All credits)
How to do please guide me
Regards,
jk

HI
1) First one is opening stock some restriction (like Business Transaction Sum total of all the business transaction for last period selected - (sum total of all debits - sum total of credits), when transaction type = RMWE + (sum total of all debits - sum total of credits), when transaction type = RMRU, RMWA, RMWL)
*Info Provider level -- through Transformations -- Formula If Then else for your 1st and normal* / OR Routine
Query -- RKF
2) Second (First +1) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
Info Provider Level -- Transformation -- ((Formula 1 ) + one is purchases some restriction (Sum total of All debits - Sum total of All credits)
Query -- RKF
3) Third (First +2) one is issue some restriction (Sum total of All debits - Sum total of All credits)
Info Provider Level -- Transformation -- ((Formula 1 + 2) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
QUERY--Rkf
Hope it helps

One idoc that needs to split into three messages

Hi,
I get an idoc from sap through change pointers. The IDOC needs to be mapped via a mapping program which splits into three different messages.
Let me know how to achieve it.
Some notable info are that the the three messages have different flat structures.
Your suggestions are well rewarded.
Regards,
B.Anandh

Hi,
Try these
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3115---- [original link is broken] [original link is broken] [original link is broken] Multi Map With out BPM
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi Various multi-mappings and
Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure --- Illustration of Multi-Mapping
and Message Split using BPM in SAP Exchange Infrastructure
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm (N:1 Mapping )
Regards
Seshagiri

Result may contain single string or comma separated need to split into rows

Hi, All... I've searched through the forums and found plenty on splitting comma separated into rows; though I'm struggling applying it to my situation. I have data that looks like the below where I need to split a value into multiple rows if it should be but the same field in the table may also contain a string that should not be separated (indicated by the "Array" field being 0 or 1)...
WITH t AS
(SELECT 1 as array, '"Banana", "Apple", "Pear"' as str FROM dual union all
SELECT 0, 'Fruit is delicious' FROM dual union all
SELECT 0, 'So are vegetables' FROM dual union all
SELECT 1, '"Bean", "Carrot", "Broccoli"' FROM dual union all
SELECT 1, '"Apple", "Banana"' FROM dual)I've looked through many of the connect_by posts on the forum and I haven't come across one that splits a field if it should be but doesn't if it should not be... may have missed it because there are plenty of these requests on the forum!
If you're feeling even more ambitious - the ultimate goal is to count the number of times a particular answer appears in an array - so notice the last portion of the data contains "Apple", "Banana"... the result would show:
RESULT
Banana             2
Apple              2
Pear               1
Bean               1
Carrot             1
Broccoli           1
Fruit is delicious
So are vegetablesI can always sort them later based on other fields in the table - but the result above would be my ultimate goal!
Any help is always appreciated. Thanks! 11g

Hi,
The examples you found should work for you. Just use a CASE expression to determine if str needs to be split or not, by looking at array.
Here's one way:
WITH     got_part_cnt     AS
     SELECT     array, str
     ,     CASE
              WHEN array = 0
              THEN 1
--              ELSE 1 + REGEXP_COUNT (str, '", "')     -- See note below
              ELSE 1 + ( ( LENGTH (str)
                              - LENGTH (REPLACE (str, '", "'))
                     / 4
          END          AS part_cnt
     FROM    t
,     cntr     AS
     SELECT LEVEL     AS n
     FROM     (
              SELECT MAX (part_cnt)     AS max_part_cnt
              FROM    got_part_cnt
     CONNECT BY     LEVEL     <= max_part_cnt
,     got_sub_str          AS
     SELECT     CASE
              WHEN p.array = 0
              THEN p.str
              ELSE REGEXP_SUBSTR ( p.str
                               , '[^"]+'
                         , 1
                         , (2 * c.n) - 1
          END     AS sub_str
     FROM     got_part_cnt p
     JOIN     cntr           c ON c.n <= p.part_cnt
SELECT       sub_str
,       COUNT (*)     AS cnt
FROM       got_sub_str
GROUP BY sub_str
ORDER BY cnt          DESC
,            sub_str
{code}
The only database at hand right now is Oracle 10.2, which doesn't have REGEXP_COUNT. I had to use a complicated way of counting how many times '", "' occurs in str in order to test this in Oracle 10. Since you have Oracle 11, you can un-comment the line that uses REGEXP_COUNT in the first CASE expression, and remove the alternate ELSE clause (that is, the next 5 lines, up to END).
To make sure that this query is really paying attention to array, I added this row to the sample data:
{code}
SELECT 0, '"Bean", "Carrot", "Broccoli"' FROM dual union all
{code}
Even though str looks just like a delimited list, array=0 tells the query not to split it, so it produces these results:
{code}
SUB_STR                               CNT
Apple                                   2
Banana                                  2
"Bean", "Carrot", "Broccoli"            1
Bean                                    1
Broccoli                                1
Carrot                                  1
Fruit is delicious                      1
Pear                                    1
So are vegetables                       1
{code}

Converting drummer to midi and split into separate tracks

The drummer app in logic pro is great. I can then convert a phrase into mdi and copy to my own track for further modifications. Also great. But is there an easy way to convert a drummer track into midi, and to split each part of the drum (hh, snare, kick etc) out into their own bespoke tracks? So that each part of the drum is then on its own track for futher processing and control.

Thanks to all for advice, tips and ideas. Just shows that there is no one way to do something in LPX.
Here is what I have found works for me, so that I can take a great groove from the drummer track, convert to midi (so that I can modify the drum part), split the kit components out to individual tracks, then ensure each kit part has its own channel strip so that each part can be fully managed independently:
The drummer track is great for brilliant drum parts. But to make your own edits you want to convert the drum part to a midi track.
To this:
Highlight the drummer track and r/click Convert To Midi Region.
Create a new track, then copy the midi region above into this new track.
In the new midi track, r/click the midi region, then select Separate By Note Pitch.
This auto creates a new track for each drum part, but they all share the same channel strip, so changing volume on one changes it on all.
To put these kit components into separate trax, do this:
To move them into unique channel strips, create a new midi/software track for each drum part, then drag each part from the original split into each of the new tracks. They now have their own channel strip.
Delete the original drummer and channel split trax.
You know have full independent control over each drum part. Assign your required drum kit to these trax and head bang away.

I'm getting a MacBook pro for college and just wanted to make sure I was correct on how to transfer everything to it such as iTunes. All I have to do is turn on home sharing and then log into iTunes on my new Mac right?

I'm getting a MacBook pro for college and just wondered how to transfer/share everything from my desktop pc to my Mac?

home sharing will work but won't transfer playcounts, ratings, and original "date added".
if you wish to keep those, use the instructions in this article here.

Home Sharing needs to be reset every time.

I use Home Sharing to watch movies from my late 2009 iMac on my 3rd Gen Apple TV. Sometime in the past few iTunes/Apple TV updates my library stopped showing up on the Apple TV. This is remedied by turning off Home Sharing at the iMac and then turning it on again. This is a relatively simple fix but it is a pain in the ***. Prior to these recent updates I could boot the iMac, wake the Apple TV, and the library was always recognized. Home Sharing just always worked without resetting anything.
I have read some other discussions on this topic and do not consider never letting the Apple TV sleep or never powering down my iMac to be acceptable solutions. I have always put the Apple TV to sleep when not in use and my iMac gets turned completely off every night. This isn't going to change and it shouldn't have to. I just want my setup to work as it previously did. Any help is greatly appreciated.

Turn off all Firewalls. This solved the problem for me.

Home Sharing Needs Recreation for every use

When I attempt to open a connection to my MBP the ATV2 won't "see" the computer until I close Home Sharing and then recreate a Home Share. This has happened repeatedly.
Annoying waste of time.

same here. all my shared content is kept on an external drive which goes to sleep after not being used. I'm thinking the ATV isn't able to see the connection when the drive is asleep.

Changing Apple ID - Currently sharing one, but need to split into two

My wife and I currently share the same Apple ID; however, she has her iPhone synced with the iTunes on her laptop and I have my iPhone synced with my iTunes on my separate laptop. The problem, of course, is that if we both use the cloud, all our info gets shared/synced together, which we don't want to do.
Is there a way for her to keep her current ID (so she doesn't have to change anything), but for me to change mine and keep access to all my apps, music, etc., in my iTunes library and on my iPhone? My understanding (which may be incorrect), is that if I change my Apple ID associated with my iPhone and iTunes (and all associated apps, music, etc.), that I may not get access to those any longer. Also, if I change the Apple ID associated with my iPhone/iTunes, I still want my wife to keep the same one we've been using.
Any tips or solutions appreciated? Apologies if this has been covered many times in the past.

I've been reading for hours & am only more confused. I hope someone can help me sort it all out!
First, I have a new iPhone 5s & new SIM card. I backed up my iPhone 4s & restored the info on the 5s.
My husband lost his iPhone & is taking over my iPhone 4s. He was sent a new SIM card.
I do not know how to set up the 4s phone for him & need advice!
Correct me if this is wrong, but we can have the same Apple ID--this will enable him access to all music & apps purchases? On the iphone 4s I changed to his email address & left my Apple ID for itunes & apps. When I tried to change the iCloud ID, it would not take it. Also when I tried to change the iMessage ID a message came up that if I deleted mine, I would not be able to receive iMessages on any device & I also have an iPad).
Would someone please tell me, in simple terms, the best way to set up my iPhone 4S so that my husband can have his own Mail, contacts, messages, etc & still be able to have access to my apps?.
I greatly appreciate any help I can get!

How to split column wise into separate flat files in ssis

IN SSIS...
1.---->I have a sales table country wise regions like (india, usa, srilanka) ....
india usa
srilanka
a b
c
d e
f
so i want output like in
flat file1.txt has india flat file2.txt has usa flat file3.txt has srilanka
a b
c
d e
f
2.----->i dont know how many regions in my table....dynamically split into separate flat files ....
pls help me.....thank u

I think what you can do is this
1. Do a query based on UNPIVOT to get the data as rows instead of columns
For that you can use a query like this
IF OBJECT_ID('temp') IS NOT NULL DROP TABLE temp
CREATE TABLE temp
Country varchar(100),
Val decimal(25,5)
DECLARE @CountryList varchar(3000),@SQL varchar(max)
SELECT @CountryList = STUFF((SELECT ',[' + Column_Name + ']' FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '<SalesTableNameHere>' FOR XML PATH('')),1,1,'')
SET @SQL= 'SELECT * FROM <SalesTableNameHere> t UNPIVOT (Val FOR Country IN (' + @CountryList + '))p'
INSERT temp
EXEC (@SQL)
Once this is done you'll get data unpivoted to table
Then you can use a execute sql task with query like above
SELECT DISTINCT Country FROM Temp
Use resultset option as full resultset and store the result to an object variable
Then add a ForEach loop container with ADO enumerator and map to the object variable created above. Have variables inside loop to get inidvidual country values out.
Inside loop place a data flow task. Use a variable to store source query , make EvaluateAsExpression true for it and set Expression as below
"SELECT Val FROM Temp WHERE Country = " + @[User::LoopVariable]
Where LoopVariable is variable created inside loop for getting iterated values
Inside data flow task place a oledb source, choose option as SQL command from variable and map to the above query variable.
Link this to flat file destination create a flat file connection manager. Set a dynamic flat file connection using expression builder. Make it based on a variable and set variable to increment based on loop iteration
The core logic looks similar to this
http://visakhm.blogspot.ae/2013/09/exporting-sqlserver-data-to-multiple.html
dynamic file naming can be seen here
http://jahaines.blogspot.ae/2009/07/ssis-dynamically-naming-destination.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Apple TV & Homehub 3 Home Sharing Drop Out

Good morning all and my apologies for posting this in the BT Vision section but I didn't know where else to go.
I've had BT Infinity for a few months now and been generally happy with the service. I'm a Mac user and at the weekend I decided to purchase an Apple TV 3. One of the main things I wanted to do with the ATV3 was to be able to use Home Sharing from my iTunes on my Mac. I set everything up and it was all looking good, within minutes I was happily streaming video to my Apple TV. 5 minutes into playback however it dropped out. It said on the Apple TV that Home Sharing needed to be enabled, I went back to the Mac, Home Sharing was enabled but I reconnected it again and it started working again. 5 minutes later again it disconnected.
I'm no network/router expert but even then I knew something was wrong. I started to trawl the Apple forums looking for people with similar issues and found a LOT! Problem is that everyone has different routers, issues, fixes and none of the solutions I tried seem to work for me, such as changing the channel on the router, reboots etc.
Basically I'm just really stuck now. I'm not the most technical of people (but I do know some stuff) but I'd love some advice if anyone can help. At the moment the Apple TV is practically unusable for me and I really would love to be able to have this working as when it does work for those brief few minutes it works really well and does exactly what I want it to.
Many thanks in advance.
Solved!
Go to Solution.

I should add I found the following on the Apple forums although this seemed to be quite an old post (2 or 3 years) and was for an older Home Hub as when I checked I couldn't seem to add the Port Maps in the same way as this post and got confused
Solution:
1. Update the software on Apple TV (Settings | General | Update software)
2. Perform windows update (Start | All programs | Windows update)
3. Obtain the latest release of iTunes software. Run iTunes. From the iTunes menu select About | Check for updates. I am running version 9.1.1.12.
4. Check that you can view movie trailers from Apple TV. If you can't then you the apple TV has not connected to the BT home hub wireless network. You need to enter the BT home hub wireless key (which is found on the back of the bt home hub) as you password when you connect your apple TV to the wireless network. Check again that you can view Movie trailers. Don't proceed until you can.
5. Enter the BT home hub manager (Start | All Programs | BT Home Hub | Hub manager). Select Advanced. Enter admin as the username and your password to your hub. This is either a password you entered when you first set up the hub or the S/N number printed on the back of the BT Home Hub. Click continue to advanced. Select Application sharing. Select Create a new game or application.
Enter MyAppleTV against Name. Select Manual Entry of Port Maps.
Enter this Information one line at a time:
Protocol | Port range | Translate To ... | Trigger Protocol | Trigger Port
TCP | 123 | TCP | TCP | 1
TCP | 3689 | TCP | TCP | 1
UDP | 5353 | UDP | UDP | 1
TCP | 80 | TCP | TCP | 1
TCP | 443 | TCP | TCP | 1
TCP | 53 | TCP | TCP | 1
6. In BT home hub manager navigate to the devices menu, just above application sharing. And select MyAppleTV from the drop down menu and assign it.
7. Turn the power off on the Apple TV, BT home hub, and PC. You must turn the BT home hub off.
8. Turn on Home hub, PC. Wait for your network to return. When it has turn on apple TV.
9. Open up iTunes. In the menu select Edit | Preferences | Apple TV. Check that Check for Apple TVs is selected.
10. In iTunes under Library and Store, Devices should appear and within Devices Apple TV should appear.
11. If this does not work then phone Apple support and do not let them fob you off by offering you a replacement Apple TV.

Only Part of Music Library Home Shared

Is there any obvious explanation for why only 51 of my 293 albums show up on iPad 2 using Home Sharing?

Just to be honest, I find the FAQs annoying. Most people I know have already been through all the stuff covered in the FAQs, and that is why they post here. If the answer was in the FAQ, why post?
Home Sharing is extremely buggy in my view. For instance, there doesn't seem to be a protocol that designates who the master/slave is. I can have my iPad set for Home Sharing and my PC set for same. But if I close down iTunes, the iPad acts as if Home Sharing is still active --- the shared library titles and icons all remain, but obviously you can't play anything. If you reopen iTunes on your PC, evem though you didn't close down home sharing in the File menu, the Home Sharing link is broken, but yet both iTunes and the iPad have no display that notes that --- both appear to be set to Home Sharing. Then one must launch into the game of logging out of home sharing on either or both devices and logging back in. Although not 100% reliable, I've found by exiting Home Sharing on the PC and then signing back in, I can reestablish the link to the iPad. EXCEPT --- if I have made any major changes in my iTunes library, the iPad doesn't perceive these and operates from the previously shared library settings. So now you are in the business of getting the iPad to sync up to the new library.
I don't know why or how my iPad only recognized 51 of the 293 albums in my library, but the only way I was able to get rid of that "memory" on the iPad, and get it to sync up to the entire library using Home Sharing was to connect the thing up to my PC, and restore it to factory settings via iTunes.
Do appreciate you offering a suggestion, but I believe Home Sharing needs some monitoring features built in so users can see just what the status is... (I know this is anathema to Apple types, but if it doesn't work 100% of the time without user machinations, you need some ways to see what is going on).

Please help me with Home Sharing

hi all
I have previously used itunes on a windows pc, which is where all my music is. I have now bought a macbook and want to transfer all my music over. I have activated home sharing on both computers and can view each others libraries ok. The only problem i am having is that i can't seem to find a way of importing the music permanently onto my macbook. i read somewhere that you can just drag the tunes over into your library but it's not allowing me to do this. any ideas?

Helenaloonie wrote:
i read somewhere that you can just drag the tunes over into your library but it's not allowing me to do this.
*home sharing* needs to be set up in order to allow you to move content across. iTunes on both machines must be authorized for the same iTMS account. both machines should have access to the internet.
these reads may be helpful: one and two.
also, if you run a firewall on either or both machines, see _*Tunes: Music Sharing does not work if Firewall is on*_.
JGG

TS2972 can I use home sharing to transfer iTunes from old computer to new computer?

can I use home sharing to transfer iTunes from old computer to new computer?

You are trying to use home sharing, you are logged into the same account for sharing on both computers (and they are connected to the same wifi network), and what happens when you try to copy your library ? Can you update your iTunes so that they are the same on both ?

Home sharing -- need to split into separate accts

Similar Messages

Maybe you are looking for