Horizontal lines on long text icon

Hi,
I am working on IW32 transaction. When a long exits for any operation, we will be getting horizontal lines on the "Text"(notepad with pencil) icon. If there is no long text or if we delete the long text then these horizontal lines doesn't appear on this icon. My problem is when I am trying to delete the long text in this transaction through my program, the long text is getting deleted but the horizontal lines on icon are still existing. Can you please help me out how to handle these horizontal lines and where are these maintained.
Thanks & Regards,
Adithya M.

are you using delete_text FM or clearing contents ?
what is the SAVEMODE_DIRECT ?

Similar Messages

Incress the lines in long text

hi experts,
can we incesss the the number of lines in long text,right now i am able to enter only 5 line i want to make it 10......the t-code is a customized one.

Hi
There is no limit as such for entering long text lines.
In the Text editor you can enter any number of lines.
we have to fetch it using READ_TEXT fun module and to display in the report/script.
Reward points if useful
Regards
Anji

Empty line in long text in order

Hi,
I'm using BAPI_SALESORDER_CREATEFROMDAT2 to create orders. Long texts can be added to the BAPI with the parameter ORDER_TEXT.
I know want to add different information. Therefore I need to insert an empty line between the different lines. How can I do that? If I add a line with just a space in the data element TD_LINE (text_line), it is not working. The BAPI might remove that while order creation.
Any advices?
Thank you

hi,
Do not append this to the internal table. Instead concatenate twice from where you want the blank link.
Example
The table contains the three lines as shown below
This report is required as to submit to the Govt. Department as a Statutory Report.
Manually preparing this form is very difficult. After this development user can get form with minimal efforts as well accuracy regarding data will be more.
But we required to display/update as
This report is required as to submit to the Govt. Department as a Statutory Report.
Manually preparing this form is very difficult. After this development user can get form with minimal efforts as well accuracy regarding data will be more.
Just you need to cancatenate the cr_lf twice at the end of 1st line
This report is required as to submit to the Govt. Department as a Statutory Report.0D0A0D0A
while displaying the long text in the Order it will show the effect.

Put Fixed guide line in long text of Notification: IW21

Hi,
I have an requirement where I need to put some fixed guide line in the notification long text whenever notification order gets created.
For an example below guidelines need to be incorporated automatically in the long text of notification whenever they get created
Ex:
Long Text Template as follows:
Detailed description of fault:
What caused the fault?
Action taken to date:
Who:
Suggested Repair / resourcec:
Please suggest how can I implement this requirement?
Appreciate your help in advance.
Thanks,
Jay.
Moderator message : Duplicate post locked. Continue with original thread.
Edited by: Vinod Kumar on Sep 14, 2011 11:29 AM

Hi,
Check the user exit :- QQMA0025 PM/SM: Default values when adding a notification
For wiring into longtext i think u can update via WRITE_TEXT
You should also ensure that this information should not be changed
regards
pushpa

Long Text Icon in CATS Timesheet Approval View

Hi:
Employee created a timesheet in ESS. He/she also keyed in some long text in the timesheet screen.
When manager goes to the UWL to approve the timesheet, there is no icon to show that there is a long-text attached to the record.
May I know if there is any place we can configure to have this icon showing for the records which have the long-text, in the portal?
We can see the icon in T-Code: "CATS_APPR_LITE - Approve Working Times" in the backend. But I'll need the same icon in the portal.
Please could someone advise me on this?
Thanks....

Hi
Did you try creating a new 'Profile' for Approver's view?
The config steps are defined at IMG>Cross-Apps Components>Time Sheet>CATS regular>Approve Working Times.
Pl do reward if this helps.

Customer exit to modify long text icon

Hi to all.
as you already know, I'm trying to make a program to modify the icon long text in reference to the number of digits in the long text.
I have found the enhancement SEUMP001 with function exit EXIT_SAPLSMPE_002, I have created the include ZXseuu11 and I have written the follow program:
IF rsmpe-menu = 30 .
rsmpe-icon_id = ' '.
ENDIF.
(that is the nuber of digit in the long text is equal 30 let the icon be blank else let the icon be underlined because in the standard program the icon long text remains blank unless the user write in).
But I receveid the following error when I execute the syntax check:'Field "RSMPE-MENU" is unknown.' Why?How must I write this program in according to the importing structure 'RSMPE-STATUS'? Thanks in advance bye
Maximilian

It looks like the EXIT_SAPLSMPE_002 does not have RSMPE-MENU as an importing parameter, and the value is not available in the program. The only value passed to the FM is OBJECT (RSMPE-STATUS).
You can use the importing parameter instead, as:
IF object = 30.
ENDIF.
Hope this helps.
Sudha
Message was edited by:
Sudha Mohan

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

FI document Line item Long text store in which table .

Respected Members,
During posting of the FI document through Tcode F-02 i m giving the some text in the long text not in the text field.
Please anybody can be help me out where exactly this long text is going to be stored or in which table.
Through F1 it is saying Field is TXLINE and Structure is RSTXT.
But i want the table name.
Please give me the answer as soon as possible .
Thanks a lot.

Hi Lee,
I am also facing problem in getting the long text information into my on e of the custom report, i need onformtion in longtext field of the accounting document number which is against item posted to vendor.here i am sending you the screenshot of the document number and long text filed and READ_TEXT function module parameters, i tried with lot of options,but no luck, it would be great if you could provide me some hint on this..

How can I create a horizontal line under a line of text?

Hi,
I have FM 12.0.3.424.
Does anyone know how to create a horizontal line under heading text that is the width of the page? Similar to creating a border but without the top and sides.
Is it even possible?
thank you in advance!

Use the "Frame Below" attribute in the Advanced tab of the Paragraph Designer for your heading tag to use a named Reference Frame from your Reference page. If you're using the default templates for your documents, you could try the Single Line selection (or make your own).

Problem in viewing long text in QP03

Hi
    Facing a strange problem while trying to upload long text in QP01 using SAVE_TEXT.
the long text is getting uploaded properly
an entry is inserted in STXH with object, id, name, etc.
but when i try to view the long text in QP03 txn. (Display), there is no icon for view long text
when i go back to QP02 in change mode, the icon for long text (Create long text without horizontal lines embedded on it) exists, after clicking it am able to see the long text and if i am saving the plan while leaving the txn, then again if i see the same plan in display mode (QP03), i am able to see the long text icon and the long text by clicking it..if and only if i view manually every long text in QP02 and save while coming out the txn., I am able to see the long text icon and the long text in QP03.
Is it any setting problem or where am i wrong?
Sathish. R

hi
   r u sure? bcoz the program was running fine with long text viewable in QP03 all this time
Sathish. R
Message was edited by:
        Sathish

Operation Long text creation problem in IW32

Hi experts,
I have a requirement of showing a checklist pop up for all the new external operations in creating a MPA work order(IW32). And when the user answers the questions on the checklist, I have to copy all the questions and answers into the long text of the corresponding operation.
The problem here is,
for a case when the long text is not yet created for a new line item, when the pop up is shown and answers are filled, I am creating a new standard text using SVE_TEXT(setting the insert paramter 'X'), but the standard text is getting created in the database i.e a record is getting created in STXH with the text id, text name, text object of the operation. But when I go to IW32 and see the operation line it shows the create long text icon which says that the text is not created at all.
In a case where the long text is already created for the operation, and then the pop up is shown with the questions and answers are filled, the questions and answers are copied into the operation long text which is already created. So this works fine.
If any pointers regarding this please let me know.
Thanks and Regards,
Asha

Hi,
Try passing SAVEMODE_DIRECT = 'X' and check..
also check if the text exists using the function module READ_TEXT once you do the SAVE_TEXT..
Thanks,
Naren

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

Issue with Capturing Long text using CALL METHOD EDITOR- GET_TEXT_AS_STREAM

HI Experts,
Standard Long text is capturing using CALL METHOD EDITOR->GET_TEXT_AS_STREAM
     but not working for Custom Long text – Only changes
Here is the Issue:
1)      Created Custom Long text in TAB. --> Good
2)      Entered few lines in custom Long text --> Good
         Click on Standard Tab , Leaving Custom tab and Custom Long text-->Good
4)      In PAI of Custom Tab – Changes captured using CALL METHOD 1 ( See below Code 1)--> Good
5)      Entered few lines in Standard Long text in Standard Tab -->Good
6)      Click another Standard Tab
7)      In PAI of Standard Tab – Changes captured using CALL MEHTOD 2 ( See Below Code 2)-->Good
8)      Come back to Standard Tab / Standard Long Text , Enter few more lines.
9)      Change the Tab , IN PAI of Standard Tab/Standard Text , Changes Captured using CALL METHOD2 ( See Below CODE 3) --> Good
10)   Go to Custom Tab , Custom Long text , Entered few more lines--> Good
11)   Click on any other tab, Triggered again PAI of Custom tab / Custom Long text using Call Method1 ( See Below Code 4) -->Good triggered PAI same CALL METHOD TEXT_EDITOR1->GET_TEXT_AS_STREAM.
12)   But additional lines are not captured , saying ZERO LINES in Internal Table and IF_MODIFIED = NO -->Issues lies here.
CODE1 ( Custom Long text entry capturing – First Few Lines )
Custom Long text Entries are stored in LS_OUTTAB-TEXT first time when entered few lines and LV_MOD is 1.
PAI of Custom tab
CALL METHOD TEXT_EDITOR1->GET_TEXT_AS_STREAM
        EXPORTING
          ONLY_WHEN_MODIFIED     = CL_GUI_TEXTEDIT=>TRUE
        IMPORTING
          TEXT                                       = LS_OUTTAB-TEXT ( FIlled with Lines entered in custom long text )
          IS_MODIFIED            = LV_MOD ( Value 1 , Modified )
        EXCEPTIONS
          ERROR_DP               = 1
          ERROR_CNTL_CALL_METHOD = 2
          OTHERS                 = 3
CODE2 ( Standard Long Text Entry Capturing – First Few Lines )
Standard Long text Entries are stored in SELECTED_TEXT first time when entered few lines and FLAG_MODIFIED is 1.
PAI of Standard tab
   CALL METHOD EDITOR->GET_TEXT_AS_STREAM
      EXPORTING
        ONLY_WHEN_MODIFIED = YTRUE ( Value 1 , Modified )
      IMPORTING
        TEXT                               = SELECTED_TEXT ( FIlled with Lines entered in standard long text )
        IS_MODIFIED        = FLAG_MODIFIED.
CODE 3 ( Standard Long Text Entry Capturing – Second time Few Lines )
Standard Long text Entries are stored in SELECTED_TEXT second time when entered few lines and FLAG_MODIFIED is 1.
PAI of Standard tab
   CALL METHOD EDITOR->GET_TEXT_AS_STREAM
      EXPORTING
        ONLY_WHEN_MODIFIED = YTRUE
      IMPORTING
        TEXT                               = SELECTED_TEXT ( FIlled with Lines entered in standard long text )
        IS_MODIFIED        = FLAG_MODIFIED. ( Value 1 , Modified )
CODE4 ( Custom Long text entry capturing – Second Time Few Lines )
Custom Long text Entries are not stored in LS_OUTTAB-TEXT Second Time when entered few lines and LV_MOD is 0.
PAI of Custom tab
CALL METHOD TEXT_EDITOR1->GET_TEXT_AS_STREAM
        EXPORTING
          ONLY_WHEN_MODIFIED     = CL_GUI_TEXTEDIT=>TRUE
        IMPORTING
          TEXT                                       = LS_OUTTAB-TEXT ( ZERO ENTRIES )
          IS_MODIFIED            = LV_MOD   ( NOT MODIFIED Flag )
        EXCEPTIONS
          ERROR_DP               = 1
          ERROR_CNTL_CALL_METHOD = 2
          OTHERS                 = 3
Can anyone help me out of this.
With Regards,
Bala M

Excellent Eitan,
Here is what I am trying to Achieve.
In Create Notification IW21 , They need 5 Long Text in Custom Tab ( Say Tab Name is MBR ).
TAB1 NOTIFICATION Standard Information , TAB2 REFERENCE OBJ , TAB 3 MalFunction , Breakdown Standard one...... TAB 7 ( Custom Tab ).
In Custom Tab , I added 5 LONG TEXT ( its 5 WHY Concept ).
When the User enters data in 5 Long text , it should store long text along with Notification number when save.
But Notification number will be generated @ the time of SAVE , but before that its just shows as
%0000000001 ( and Number will be generated 1000065479) at Save.
How to achive this .
I did this:
Added 5 Custom Container. and In PBO / PAI
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
IN PBO
   CREATE OBJECT TEXT_EDITOR1 ,    CREATE OBJECT TEXT_EDITOR2,    CREATE OBJECT TEXT_EDITOR3 like wise 5
   CALL METHOD TEXT_EDITOR1->SET_TEXT_AS_R3TABLE ,    CALL METHOD TEXT_EDITOR2->SET_TEXT_AS_R3TABLE .. Like wise 5 , So when the user Click on Custom Tab ( MBR ).
It give 5 Long text.
When he click tab1 or tab2 or tab3 .. and again tab MBR , still data is available.
How to store this data for future retrival ( IW22 or IW23 ) ?
Its working fine when I enter first time and goes here and there and finall save .
IN SAVE BADI , I imported the Long text and created Standard Text SO10 with Notification Number with LONG1 , LONG2 .. means 1000065479LONG1 as standard text.
But not working when I entered first time and go to tab1 and tab2 and then to MBR tab and added few more lines , its not exporting full lines and in IMPORT ( SAVE BADI ) giving ZERO Lines.
Please help and thanks for your quick response.

Long text problem in sap script

Hi Experts,
I have craeted sap script for payment print progrem.. in my sap script one window is text window... client want more then 300 char for that window. for that i use read_text function module... its working fine... but problem is it retrive only one line from long text editor. only 70 char i got.
below is my coding......
CALL FUNCTION 'READ_TEXT'
EXPORTING
    ID                            = '0001'
    LANGUAGE                      = sy-langu
    NAME                          = NAME
    OBJECT                        = 'DOC_ITEM'
TABLES
    LINES                         = LINES          .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT LINES.
n = 0.
l = 132.
text+n(l) = lines-tdline.
n = n + 132.
l = l + 132.
ENDLOOP.
in sap script i have direct pass lines-tdline
*&lines-tdline&
Please suggest me which point i missing?
Thanks
Jigar

Hi All,
The standard text will be stored in Name = ORDCONF_TEXT_(sales org)_(distributionchannel)_(division)
Text ID = ZSD
Examples: ORDCONF_TEXT_4000_01_01 , ORDCONF_TEXT_4000_01_80 , ORDCONF_TEXT_1000_01_01.
Requirement :
The print program /form will need to pick up the appropriate standard text based on the Sales Area (combination of Sales Org / Distribution Center / Division) of the sales order [VBAK-VKORG / VTWEG / SPART], provided a standard text has been created for that Sales Area. Itu2019s not required that every sales area have a standard text, so if one is not found, this step should be skipped and the rest of the print program executed.
The new text should print after 2 blank lines after the Printable Notes text (which is after the line items and the Total Net Price prints).
The font should be the same size as the Printable Notes, but bolded rather than italicized.
The text should print in the same columns as the Printable Notes currently print in (Material Description / Scheduled Ship Date / Quantity) .
So the logic i have used is this below code:
I used a subroutine in the layout of the main window becoz i need to print it in the main window below after 2 blank lines of line items.
This is logic in the layout:
/:PERFORM GET_OBJECT IN PROGRAM ZSDRP001_ORD_CONF_IRE
/:USING &VBDKA-VBELN&
/:CHANGING &ORDCONF_TEXT&
/:ENDFORM
/:INCLUDE &ORDCONF_TEXT& OBJECT TEXT ID ZSD PARAGRAPH A1
I called this subroutine in the print program:
Logic in the print program:
FORM GET_OBJECT TABLES INPUT_TAB STRUCTURE ITCSY
                                             OUTPUT_TAB STRUCTURE ITCSY.
DATA : TMP_VBELN LIKE vbdka-VBELN,
            TMP_VKORG LIKE VBAK-VKORG,
            TMP_VTWEG LIKE VBAK-VTWEG,
           TMP_SPART LIKE VBAK-SPART,
           TMP_TXNAM1(40) TYPE C VALUE 'ORDCONF_TEXT',
           TMP_TXNAM2(100) TYPE C.
DATA: v_text LIKE tline-tdline.
DATA : P_V_TEXT LIKE tline-tdline.
CLEAR : TMP_TXNAM1, TMP_TXNAM2, TMP_VBELN, TMP_VKORG, TMP_VTWEG, TMP_SPART.
READ TABLE INPUT_TAB WITH KEY NAME = 'vbdka-VBELN'.
IF SY-SUBRC = 0.
tmp_vbeln = input_tab-value.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING INPUT = TMP_VBELN
I
MPORTING OUTPUT = TMP_VBELN .
CLEAR VBAK.
SELECT SINGLE VKORG VTWEG SPART INTO (TMP_VKORG, TMP_VTWEG, TMP_SPART)
                                        FROM VBAK WHERE VBELN EQ TMP_VBELN.
IF NOT TMP_VKORG IS INITIAL
AND NOT TMP_VTWEG IS INITIAL
AND NOT TMP_SPART IS INITIAL.
CONCATENATE TMP_TXNAM1 TMP_VKORG tmp_vtweg tmp_spart into TMP_TXNAM2 SEPARATED BY '_'.
endif.
CONDENSE TMP_TXNAM2 NO-GAPS.
PERFORM read_order_text USING TMP_TXNAM2 CHANGING v_text.
READ TABLE output_tab WITH KEY NAME = 'ORDCONF_TEXT'.
IF SY-SUBRC = 0.
output_tab-value = P_V_TEXT.
MODIFY output_tab index sy-tabix.
endif.
endform.
FORM READ_ORDER_TEXT USING P_TMP_TXNAM2 CHANGING P_V_TEXT LIKE tline-tdline.
DATA: ztdid LIKE thead-tdid,
          zlang LIKE thead-tdspras,
          zobj LIKE thead-tdobject,
          zname LIKE thead-tdname.
DATA: tlines TYPE STANDARD TABLE OF tline WITH HEADER LINE
          thead LIKE thead.
CLEAR P_V_TEXT.
ztdid = 'ZSD'.
zlang = 'E'.
zobj = 'TEXT'.
zname = P_TMP_TXNAM2.
CLEAR tlines.
REFRESH tlines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
object = zobj
name = zname
id = ztdid
language = zlang
IMPORTING
header = thead
TABLES
lines = tlines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
LOOP AT tlines WHERE NOT tdline IS INITIAL.
MOVE tlines-tdline TO P_V_TEXT.
ENDLOOP.
ENDFORM.
But still its not getting printed .Plz tell me where i am going wrong.
Thanks,
Suman

Horizontal lines on long text icon

Similar Messages

Maybe you are looking for