Hostname change is not working in LMS 4.0.1

Dear All,
Eventhough i change the hostnames in LMS using Edit Identity, it sends alert using the old host name. Do we have to change somewhere else to make it updated or need to restart any services for this..?
How it takes effect..?

Hi Prasan,
Alerts from DFM ..Right ?
How does the devices look like in DFM ? ( HostName or Ip address )
check this :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/3.2/user/guide/useDevMg.html#wp1367517
Thanks-
Afroz
[Do rate the useful post]

Similar Messages

Dynamic action on text box change does not working

i have a page with following components.
a report that has and edit link.
a text box to catch the primary key from report link when it is clicked
a number of elements (text boxes, check boxes and LOVs) which are used as data entry form.
Now my design is that user enter values save them and no sooner did they save, the report depicts new
values. if user want to edit any record, they click on edit link and the data entry form elements
should now bring all those values from DB on page. i m successful to pick primary key and bring
it in a hidden text box and wrote a dynamic action on its change event that will bring values from
DB and set all page elements. but but but.........the change event doesnt work. it only work
when focus is lost from the text box...!! offcourse user wont want to click in that "hiddent" text
box and then click some where else to bring values in page data entry form......
help is humbly requested from forum or if any other solution approach is to be used easier than
one i m using, would be appreciated.
thanks in advance for reading my bore question :)

bundles of thanks for reply. i m going to elaborate.
1. My page no is 3.
2. Hidden Item name is P3_EDIT_ACTIVITY_ID
3. Data entry form, hidden item and the report are on the same page.
4. on the edit link of report, i have used following settings.
    Target: Page in this application
     Page: 3
     and i set hidden item as follows......
     Item 1   P3_EDIT_ACTIVITY_ID         Value #ACTIVITY_ID#
   well, when i click the link on report it does bring Activity_Id in the hidden box (which is not yet hidden for debugging purpose)
Next i wrote Dynamic action which fires on the change event of P3_EDIT_ACTIVITY_ID and run PL/SQL code with in it which is as follows
declare
Dept varchar(50);
begin
   select my_dept into Dept from activity_main ACTIVITY_ID = :P3_EDIT_ACTIVITY_ID;
   :P3_Dept := :Dept;          (i did use :P3_Dept := Dept also but this wont work)
insert into testdynamic (stamp) values (Dept); (I did this to check whether correct value is brought from DB, yes it works correctly, correct Dept is being inserted in stamp column)
end;
i have created another true action to check when the dynamic action is fired. its very simple alert. and the problem is, it only fires when focus is lost from the P3_EDIT_ACTIVITY_ID. i mean, when u keep changing value inside the text box, nothing happens, when u go outside, the alert is fired and so the pl/sql procedure. but the line
    :P3_Dept := :Dept;       OR      :P3_Dept := Dept;         arent working which is the actual requirement.
I m not using set value here as i have to set a lot of values on page not one. further. plz let me get rid of this lost focus thing as i want the form to be populated with correct values related to P3_EDIT_ACTIVITY_ID as the user click on any edit_link in the report.
Thanks for persistence. i hope i have provided all the details.
looking forward.

Change Notification not working on Oracle 11.2.0.2.0 but ok with 11.2.0.1.0

Hello together,
we have an .Net application which implements the Change Notification using ODP.NET.
On the customer site all worked well on the development and test environment connected to an Oracle database version 11.2.0.1.0. After setup of the production environment (Oracle 11.2.0.2.0 on another server) the change notification didn't work anymore.
The notifications are registered properly, but the event handles don't receive the change events.
It was checked, if all ports are open, firewall etc. and no hint from this side was found, why it should not work.
Then we recompiled the .Net application with references set to the new version of ODP.NET (11.2.0.2.1) - also without success.
After all, a second database was installed in the production environment, but now version 11.2.0.1.0 (same version as in development and test environment), and if connected to this database the change notification worked as expected.
Can anybody give me a hint, what might be the reason for not receiving change notification events on Oracle 11.2.0.2.0 ?
Thanks a lot and best regards
hattl

This is a DB bug, not an ODP.NET bug. If it were documented anywhere, it would be in the DB README. This problem affects anyone using change notification on a DB on any platform. This is not a problem specific to ODP.NET.
I suspect this issue is not documented since it was diagnosed after 11.2.0.2 became available. If you wish to track a bug, you can log into My Oracle Support and view the bug log. I viewed the bug log myself and the problem has been resolved. It's just waiting for the 11.2.0.3 patchset to be released.
If your organization needs this fix sooner than the second half of this year, let me know. I'll ask Oracle Support if they can include this fix in a bundled patch or one-off.

Voicemail Trying to change password not working?

the password change feature online not working?

I do apologize that you were having problems changing your voicemail password via the My Verizon website.
It does appear the issue has been resolved. However, if you continue to have problems, please let me know.
Keep in mind, you can also change your password via the device/phone itself
To reset the Voice Mail password from the wireless handset:
Press *611 then press SEND (airtime is free).
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.
OR
Call (800) 922-0204 (toll free) from any phone to reach the easy-to-use automated customer service menu.
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.

Click the lock to make changes is not working. Lion 10.7.2

I cannot make any preferences' changes that require clicking on the lock. When I try to click on the lock it simply does nothing and remains locked. I've tried doing a permission repair using disk utility and I cannot create another admin account because that requires opening the lock in Users&Groups. Also, when I login into root, then the lock is also locked.
The problem began when I updated to Lion.
I've had no luck finding a solution in forums.

i have the same issue,
summary : at mine clicking the lock at any kind of program does not work at all, not working in system pref,
not working at ''get info'' window, not working in any other kind of lock, i tried defragging via idefrag but that couldn't work because it needed a lock to be opened as well, i can't move my files to some folders, getting the ''The operation can’t be completed because an unexpected error occurred (error code 100022).''
plus when i log out, cannot log in because when i type my password it accepts it but then nothing happens, i had a root account as well but i can't enter it and can't create again because of the lock, but when i log in with guest account(no pass required) i can make changes via clicking the lock and filling in admin username and password in system preferences. and i created a new admin account in guest account by filling admin info for authorization in system preferences > users&groups , set no password, logged out but could not log into that account as well. my system is set to login to my account when the system starts.
so this is what i get with the clean display in console, opening system pref, then clicking users&groups, then clicking the lock. this is system.log
Jun 6 04:46:06 idiyot System Preferences[4902]: kCGErrorIllegalArgument: CGSDeviceCreate: Invalid window
Jun 6 04:46:06 idiyot System Preferences[4902]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jun 6 04:46:06 idiyot System Preferences[4902]: Failed to create window context device
Jun 6 04:46:06 idiyot System Preferences[4902]: CGWindowContextCreate: failed to create window context delegate.
Jun 6 04:46:06 idiyot [0x0-0x90090].com.apple.systempreferences[4902]: Jun 6 04:46:06 idiyot.local System Preferences[4902] <Error>: Failed to create window context device
Jun 6 04:46:06 idiyot [0x0-0x90090].com.apple.systempreferences[4902]: Jun 6 04:46:06 idiyot.local System Preferences[4902] <Error>: CGWindowContextCreate: failed to create window context delegate.
Jun 6 04:46:06 idiyot System Preferences[4902]: _initWithWindowNumber: error creating graphics ctxt object for ctxt:0x16bdb, window:0x0
Jun 6 04:46:06 idiyot System Preferences[4902]: CGPixelAccessLock failed!
Jun 6 04:46:07 idiyot System Preferences[4902]: Error loading /Library/Audio/Plug-Ins/HAL/TASCAM_US122L_US144.plugin/Contents/MacOS/TASCAM_US 122L_US144: dlopen(/Library/Audio/Plug-Ins/HAL/TASCAM_US122L_US144.plugin/Contents/MacOS/TA SCAM_US122L_US144, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/TASCAM_US122L_US144.plugin/Contents/MacOS/TASCAM_US 122L_US144: no matching architecture in universal wrapper
Jun 6 04:46:07 idiyot System Preferences[4902]: Cannot find function pointer CreateAudio for factory DB8AEA2A-E42F-11DA-B71D-000A95B009DC in CFBundle/CFPlugIn 0x400b38f00 </Library/Audio/Plug-Ins/HAL/TASCAM_US122L_US144.plugin> (bundle, not loaded)
then after, i do the same with var/log/secure.log
Jun 6 04:48:29 idiyot authorizationhost[5064]: in od_record_check_pwpolicy(): retval: 0
Jun 6 04:48:29 idiyot authorizationhost[5064]: in od_record_attribute_create_cfstring(): returned 2 attributes for dsAttrTypeStandard:AuthenticationAuthority
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Establishing credentials
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Got user: alicankaralar
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Context initialised
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Got euid, egid: 0 0
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Done getpwnam()
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Done setegid() & seteuid()
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): pam_sm_setcred: krb5 user alicankaralar doesn't have a principal
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Done cleanup3
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Done seteuid() & setegid()
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): Done cleanup4
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Jun 6 04:48:29 idiyot authorizationhost[5064]: in pam_sm_setcred(): pam_sm_setcred: no domain found skipping
Jun 6 04:48:29 idiyot com.apple.SecurityServer[29]: UID 501 authenticated as user alicankaralar (UID 501) for right 'system.preferences.accounts'
i tried repairing disk, permissions, both in system and recovery volume, and i just upgraded to 10.7.4, but the problem was present in 10.7.3, i noticed it two days ago and i just upgraded hoping that would solve the problem.
edit: i have found out that my problem is best described here, not the real concern of the OP but at the 4th option they say its a netinfo database problem, and diagnostics are the same problems that occur to me of that option but the system they're talking about is 10.1.5, i guess things have changed since then, but the problem is the same . http://macosx.com/forums/mac-os-x-system-mac-software/20630-cant-click-click-loc k-make-changes-button-when-installing.html
hope you can help
thanks in advance

Topology map not working in LMS 3.1

Hi,
I recently did a clean installation of LMS 3.1. The topology services is not working returning an error named "Failed to initialize: Java.lang.NumberFormatException: null"in the pop up window.
Any help would be appreciated
with thanks
sathappan

I can't unse this version of java plug-ins because in a screen of Campus
Manager said you need to install java 1.5. I deinstalled all plug-ins of Java of my notebook an then install only plug-ins that LMS 3.1 have jre-1_5_0_15-windows-i586-p_withvbj.exe
Only with this plug-ins, Topology map is working now.
Thanks.

Apply changes button not working as expected

Hi
I have a page, this page has some fields and a drop-down list where it has a projectname as the values and when I change a value in the drop-down list and click on "Apply Changes" button it does update the table and the changes can be viewed on the page ............. but when I have created a copy of this same page and changed the select statement of the drop-down list and in order to change the year from the drop-down list and click on apply changes then it does not update the table or changes are not reflected on the page.... am I doing soemthing wrong somewhere , but not sure where !
Can anyone know what could be the reason ....?
thanks

Hi Nancy,
That could be the case, but I tried it multiple times during the day and it was not working. I think I would have notice it if I "missclicked" it like 10 times in a row. I normally use this option more than once a day and it works. But If it happen again, I'll pay attention to that.
Thanks!

Exit icon on playbar not working in LMS

Hello,
I was wondering why the close icon X on the playbar of a CP6 project does not work when publishing and placing in an LMS? Any ideas?
Thanks kindly
alison

This might help.
http://forums.adobe.com/thread/874798?tstart=540

Save changes button not working in my tabular form

Hello,
I have created a tabular form with all the button like cancel,delete,save,add row and their processes by default
when i tried to run the report, the save is not working (whenever i tried to make some changes and update the form) like it giving me an error saying that
" Error in mru internal routine: ORA-20001: no data found in tabular form "
I looked at the process MRU, it is OKAY.
I tried to delete it(the MRU process) and created a new MRU process then also the SAVE button is not working, like it gives the same error.
" Error in mru internal routine: ORA-20001: no data found in tabular form "
Can anyone help me out with this issue...!
what might be the problem?

There could be two reasons for this error:
1. in your MRU Process, you didn't type the proper primary key column name
2. your tabular form is missing the referenced collumn
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Captivate 5 not working with LMS when linking to AICC published file

When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

another HotFix worked for me:
This is with reference to the issue you are facing with AICC courses on LMS.
Please follow the steps mentioned below and let me know if this solves the issue for you.
1.       Close Captivate if already launched.
2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
3.       Navigate to folder “Templates”
4.       Open folder “Publish”
5.       Open folder “AICC”
6.       Rename the HTM file “default.htm” to “default_old.htm”.
7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
8.       Paste it inside “AICC” folder.
9.       Launch Captivate and open the project.
10.   Re-publish the project and upload the content to LMS.
Let me know if this solves the issue.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team
hope it works for you!

SSL email changes do not work in Outlook 2003 & 2007

Received the email about changing email account settings. Made the changes in Outlook 2003 (on one laptop) and Outlook 2007 on 2 others - as shown on the help page, but they don't /didn't work. Operating systems include Windows 7, Vista, and XP. I could no longer send nor receive. It did not work in either my iPhone, nor the other three laptops. Consequently, an important email took me 30 mins to send - had to go back to original settings. What is going on?
Regards, itsnotme

WAKE UP VERIZON - THIS ISSUE HAS 100'S OF COMPLAINTS; COUNT THEM.
PLEASE RETRACT THE NOTICE UNTIL YOU HAVE FIELD TESTED, AND/OR UNTIL AFTER YOU HAVE MIGRATED YOUR SERVERS TO ACCEPT THE NEW SECURITY SSL SETTINGS.
THIS IS ANNOYING.

Clickbox not working in LMS

I created a clickbox in an eLearning module developed with Captivate 7 -- the clickbox is supposed to open a document at a URL. It worked fine in preview mode within Captivate and when published as an Adobe pdf. When I published the module as a SCORM 1.2 package and uploaded it to my LMS -- the clickbox no longer works. Is there some specific coding or reference I need to add to make this work in my LMS? FYI -- our LMS is SumTotalSystems Learning Maestro.
Thanks.

OK - this a simple link to a website, right, not a .pdf form you downloaded and saved to your computer?
If so, and you've copied and pasted the link from the browser, there's really no reason for this not work, unless the address is blocked by your LMS administrative settings.
Go to https://cloud.scorm.com/sc/guest/SignInForm and sign up for a free SCORM Cloud account. Once you've set up the account, you can publish and upload your project to the cloud and test it. The Cloud is the current standard for SCORM packages - any package that is functional here should (emphasize - should) run on a compliant LMS.
Justenuf

Pages "Track Changes" does not work when working in cells in a document

While attempting to edit a WORD file (converted to Pages for my macbook) it was discovered that the Track Changes feature will not register if the changes are inside a "cell" in the file. The RFP I am trying to respond to is made up of multiple columns and rows. Anytime you make a change inside the columns or rows the "Track Changes" does not record the change. Outside of the columns/rows it works perfectly.
I download the most recent OS and Pages file last week. The issue started then.
Has anyone had this issue before?

Yes.

Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

Highlighting changes does not work with rulebased workflow

Hi Experts,
When we run the standard change requests provided with MDG 7 FP 2 we can see changes highlighted in colour but when we copy the same change request and make it a rule-based workflow we lose the functionality in the new change request.
Is there something else we need to do to have the same functionality for Rule based workflow?
Thanks and best regards
Riaan

Hi Sanjay,
Yes.I am copying the standard change request that is working with highlighting the changes and then I change the copied workflow to the rule based workflow.
The standard Change requests are highlighting the changes.
I am using MDGF 7 with FP 2.
We upgraded from MDG 6.1 to MDG 7 FP 2 and I am not convinced that the old UI was completely replaced when I run report RGZZGLUX before I opened the firs change request.
I have the new UI in my change requests but the highlighting function is not working , even if I create a new CR from the Standard CR's now.
Regards
Riaan

Hostname change is not working in LMS 4.0.1

Similar Messages

Maybe you are looking for