Hotmail blocking emails from iMS5.2 relay server???

Hi all, lately we have started experiencing problems sending emails from our iMS5.2 environment to hotmail.
In our iMS5.2 environment, we have two mail relays/gateways. Today I tried manually sending emails to hotmail using telnet. I found that I was able to send an email from one gateway (gw2) but not the other (gw1). On the mail gateway that I can't send an email, gw1, using telnet, I get the following error:
550 Your e-mail was rejected for policy reasons on this gateway. Reasons for rejection may be related to content such as obscene language, graphics, or spam-like characteristics (or) other reputation problems. For sender troubleshooting information, please go to http://postmaster.msn.com. Please note: if you are an end-user please contact your E-mail/Internet Service Provider for assistance.
A search on Google reveals this blocking is quite common with hotmail.
Emails sent to yahoo, gmail work fine.
Am I right is thinking that hotmail is blocking emails that originate from iMS5.2 mail gateway gw1? And if so, what can be done to remedy the situation?
Thanks in advance,
Stewart

This isn't so much a iMS5.2 question as a simple SMTP Host question. HotMail is likely blocking your site by IP address. You could change the IP address of the host, but this might be a symptom to a larger problem of abuse.
My advice is to go through the mail.log files to identify when those emails were originally sent to Hotmail. It might reveal a potential problem which might be an internal spammer.

Similar Messages

  • FiOS IPS server suspected of blocking emails from Constant Contact

    My homeowners assocation cannot get emails through to me at {edited for privacy}, but they do get emails through to my wife at {edited for privacy}. These emails are administered by Constant Contact, who suspect the FiOS servers of blocking emails to me. They suggest that I send you the following information:
    To: Verizon ISP Customer Support
    Subject: Remove Constant Contact Block
    Hello. My name is {edited for privacy} and I understand that you employ filters and/or blacklists to protect customers like myself from unsolicited email; however, this might have made it impossible for me to receive certain information that I have solicited. I value these communications and would like to receive them using my AOL email address.
    The sender of these emails uses an email marketing service called Constant Contact. Constant Contact is not an open relay and has strict anti-spam policies in place. Possibly because your filters block emails from Constant Contact I am unable to receive these communications.
    I ask that you please help me determine why these emails are being blocked. For further information about Constant Contact or to request more information from them such as log files, the Operations team can be reached at - {edited for privacy}.
    Mail from Constant Contact can be found by the following characteristics for whitelisting:
    "Envelope from:" domains:
    @in.constantcontact.com
    @in.confirmedcc.com
    Sending IPs:
    All mail from Constant Contact is sent from:
    IP Range: 208.75.123.0 - 208.75.123.255
    Please contact me when this problem has been resolved at {edited for privacy}.
    Sincerely, {edited for privacy}

    Hello tomfulks,
    This community is meant mainly for peer-to-peer support. If you need to provide information to a Verizon representative, you should contact customer service directly.

  • Spamcop blocks email from @tiscali.c​o.uk addresses to hpeprint.c​om

    Printing to [email protected]  works fine from @gmail.com and @hotmail.com addresses  but  Spamcop blocks email from @tiscali.co.uk addresses (TalkTalk webmail)    
    I am using HP Connected HP 8600 pro
    I get a delivery status notification failure in my inbox
    Header : 
    Delivery Status Notification (Failure)
    From:Mail Delivery System [[email protected]][add contact] 
    Contents : 
    The following message to <[email protected]> was undeliverable.
    The reason for the problem:
    5.1.0 - Unknown address error 554-'5.7.1 Service unavailable; Client host [62.24.202.76] blocked using bl.spamcop.net; Blocked - see h t t p :/  /www.spamcop.net/bl.shtml?62.24.202.76'
    I have tried 2 different @tiscali.co.uk addresses and get same error with each
    I have checked the phpeprint.com address and it is the same for all my all mail accounts
    Other than making all users have hotmail accounts, is there  a solution.
    Any advice please.
    Chris

    Printing to [email protected]  works fine from @gmail.com and @hotmail.com addresses  but  Spamcop blocks email from @tiscali.co.uk addresses (TalkTalk webmail)    
    I am using HP Connected HP 8600 pro
    I get a delivery status notification failure in my inbox
    Header : 
    Delivery Status Notification (Failure)
    From:Mail Delivery System [[email protected]][add contact] 
    Contents : 
    The following message to <[email protected]> was undeliverable.
    The reason for the problem:
    5.1.0 - Unknown address error 554-'5.7.1 Service unavailable; Client host [62.24.202.76] blocked using bl.spamcop.net; Blocked - see h t t p :/  /www.spamcop.net/bl.shtml?62.24.202.76'
    I have tried 2 different @tiscali.co.uk addresses and get same error with each
    I have checked the phpeprint.com address and it is the same for all my all mail accounts
    Other than making all users have hotmail accounts, is there  a solution.
    Any advice please.
    Chris

  • Config OES/sendmail to forward email from/to Exchange Server

    Hi
    I have installed an OES on a Red Hat ES 3.
    But on my network i have a Exchange Server that send/receive all emails. And i cannot change here nothing(company rules). Now what i need to do? I need to config the Linux sendmail to relay on the Exchange Server(the exchange is now configured relay on Linux) to forward the emails that i need.
    I only need this to one email account e.g [email protected] The Oracle Email Server is running, but i need to config the Linux to forward the email to the Exchange Server, and go to outside. Also i need that receiving an email to [email protected] that my Linux receive this email from the Exchange Server.
    I have configured the sendmail.cf like Oracle says on the Administrator’s Guide manual. I have add the ip and name of the Exchange on /etc/mail/access to relay. But still i cant send emails outside. If i test the sendmail -v testuser, and all says ok. I have tested telnet domain 25, and all went ok.
    I think the only problem is forward the oes to exchange to forward outside
    Any help
    Many thanks
    Thank you
    Jail

    Hi andreas
    Yes i also think that it maybe resolved by an alias and forwarding
    Th COM is the domain in the OES is the com default. Is this domain that you referring?
    The company domain that is in the OES(e.g xpto.com) is the same that is in the Exchange. Do you think this will be a problem? Must i create one like oes.xpto.com? To work with the OES?
    I have created a relay on the access file, but is this ok? Or must i need change anything else? Mean while i will check that url
    And yes i can connect to the Exchange on port 25 from the RH
    Since i have several user/account created on the OES, the only think that i did not understand yet is how can they receive any email?
    The fax@domain was a example. But i can collect all outside emails from that account and with some rules forward to any other OES account? I think this is possible? Or this is the hard way to configure the OES?
    Thank You
    Jail

  • Creating accounts and receiving email from a mail server

    Hi,
    I'm wanting to create a web application that creates a new email account for a user when they sign-up on my website. My application will process any email that is sent to that email address and extract parts of the email to store in a database.
    I think I can use JavaMail to poll the email accounts for new emails which will then be parsed and inserted into my database but I don't know how to programmatically create the email account for each user. I'm looking at using either sendmail or postfix as my mail server and this is on either *nix or os x.
    Any advice/pointers to Java APIs would be appreciated. If there's nothing available in Java that can do this kind of thing I'd love to hear about other solutions people know of or think might work :)
    Thanks!
    - E

    Hi there!
    Do the following
    message.setFlag(Flags.Flag.DELETED,true);
    folder.close(true);
    store.close();
    these 3 statements will delete email from the mail server.
    get back to me after u try this.
    ciao
    vivek

  • Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

    Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

    I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

  • The mail client at my iPad Air can't download emails from a POP3 server!?

    why can't the mail client at my iPad Air download emails from a POP3 server!?

    Follow the directions in this post to create a POP account:
    Forcing creation of a POP or IMAP email account

  • Send iCloud email from alternative smtp server?

    How do I send iCloud email from alternative smtp server? The setting is 'greyed out' on my iPhone so I cannot tell iCloud to use another server.
    The reason is so I can have my outgoing email appear from my own domain email address rather than my me.com address. Mobileme would allow this - and Mail on the Mac does allow it, but the iPhone under iOS 5 seems not to allow it....
    Any ideas?

    I have spent about 4-6 hours working directly with folks from Tim Cooke's office, various support levels, and through them their engineers.
    As much as I tried to convince them their logic is flawed, the engineers for iCloud come back and say this is expected behavior because somehow it helps secure iCloud from being a spam source. The fine and helpful gentleman from Cooke's office now understands how it is a MobileMail.app client issue, having nothing to do with iCloud servers (because we are in fact trying to bypass their servers) still totes the "it's expected behavior" line from the server engineers.
    I have implored him to follow up with the iOS MobileMail app programmers and not the iCloud programmers. I am hopeful he will. Until then you have to choose between having iCloud push and losing your online identity, or losing push email and keeping your preferred address.
    Fun to try: turn off all smtp servers. Send email. Gets stuck in outbox. Turn on your preferred smtp server. That one email will use your preferred alternate address, but subsequent ones revert back to the old .me.com smtp servers. Personally I believe this points to a client programming error more than reinstating a preferred behavior. Aggravating!
    I spend $500 on a new phone. Google takes away my exchange client ability and apple makes me choose push email vs outgoing email address.

  • Why Apple is blocking email from reaching my mac email account that I would like to receive.  How do I correct this?

    Apple is blocking email from reaching my mac email account that I would like to receive.  How do I correct this?  There are some important emails that I am not receiving because they never make it to my inbox or even my spam account.

    Hey there MikeMach,
    It sounds like people are sending you emails but they never arrive to your inbox or your Junk folder. According to the following article you may need to reach out to iCloud support directly for assistance:
    iCloud: Identifying and filtering junk mail
    Due to the complexity of accurately detecting and filtering out junk mail, on rare occasions a legitimate email from a friendly source may be blocked from reaching your Inbox. This is called a false positive.
    If you feel that a legitimate email message was inadvertently filtered, you may want to ask your friend to send a follow-up email to verify that the issue exists. If you notice that multiple email messages are being delayed, bounced, or not delivered, contact iCloud Support. Also make sure to check your Junk folder for email messages that were incorrectly marked as junk mail. To check your Junk folder at iCloud.com, choose the Mail application and click the Junk folder in the sidebar. Email messages in the Junk folder are automatically deleted after 30 days.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • ICloud is blocking emails from my website

    I work for a company that is similar to eBay in that we act as a venue for registered members to sell collectible LEGO items. I work behind the Help Desk and have received many similar complaints from iCloud (@me.com) email addresses. These users continue to complain that they are not receiving email notifications regarding invoices for orders. I called Apple but was on hold for so long, I had to get back to work and gave up.
    What I am wondering is if Apple is blocking emails from our website. I would really appreciate it if an Apple representative could contact me regarding this issue, as it is causing a lot of frustration with our community members. We have had to ask users to sign-up for Gmail accounts to receive correspondence, because we simply cannot come up with another solution. Is it possible that we are blacklisted? We did send out promotional emails over Christmas and I am worried we were blacklisted as SPAM senders. Please help me out here, it's not easy being behind the Help Desk when you are 100% sure the problem is not on your end and you can't do anything about it. Thanks!

    First try:
    http://support.apple.com/kb/TS5362
    OS X Mavericks v10.9.1: Repeated prompts to unlock "Local Items" keychain
    iOS 7 introduced syncing keychain iTunes (passwords) between devices included Mac computers
    If still problem see the other items of
    :https://discussions.apple.com/message/24739987#24739987

  • How to read emails from Microsoft Exchange Server

    I have microsoft exchange server and I want to read emails from microsoft exchange server. There is no POP3 server. So is it possible?
    If it is possible to read emails from microsoft exchange server then please give me some idea.
    Thanks
    Santanu

    santanu wrote:
    Hi,
    My company is using Microsoft exchange server.
    IMPA and POP3 has been disabled, but my requirement is I wan to read email.Then ask the administrator of the server to enable IMAP. If you have a valid business requirement to do that, there would be no reason for the administrator to refuse.

  • How to poll emails from a SMTP server

    Hi, It seems all the examples I found were to construct/send emails to SMTP server. How to build a module to retrieve emails from a SMTP server and then extract the info? I checked the javax.mail.Transport
    class and could not find method such as getMail or getMessage. Thanks,

    Close but so far... ;)
    You'll want to check out the rest of the [url http://java.sun.com/products/javamail/javadocs/index.html] JavaMail API classes . In particular take a look at the Store and Folder classes.
    One last thing - here's a really good [url http://java.sun.com/developer/onlineTraining/JavaMail/] tutorial  that may help.
    &#8734; brewman &#8734;

  • Block email from China

    How do I set up a rule to block emails from China? Better yey, how can I block emails that aren's in English?

    I haven't found any reliable way to block non-English emails with the included rules or junkmail filter. I turned to SpamSieve which has worked pretty well:
    http://c-command.com/spamsieve/
    It's not free but I think it's worth the price. You can download their trial version and test it out for yourself.
    Regards.
    Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Communities. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

  • How can I read a email from a POP3-Server?

    Hallo,
    I want to read emails from a POP3-Server.  Also attached files.
    I use LabVIEW 7.0 and the Internet toolkit.
    Any suggestions?
    Thank you
    Thomas

    Hallo Thomas,
    2 suggestions :
     - first go to Help >> Seach examples... and search for pop mail, no doubt you'll find somtehing.
     - then have a look at that thread, there are some informations you might want to know before coding
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • My airport is blocking me from my web server.

    I am a web designer and I have been blocked from viewing any web sites that are on my server.  Everything else is working fine but I can not view any web sites, access FTP or emails (hosted on my server) on any device (macbook, imac, ipad, iphone, windows computer) that is connected throught my wifi via my air port time capsul.
    I have trouble shooted this with my server administrator, my moden / internet service provider and nothing seems to work...
    To clarify my servers are not locaed here they are in another city, I can view everything else on the world wide web, this problem only effects the sites on my server.
    It started from a brutforce lock out when trying to connect to the server with an incorrect username/password.
    Also when trouble shooting with my ISP we noticed that when I pluggin in the modem directly to my macbook pro it would not asign an IP address but it did when into my Windows PC (which I hate and never use).
    I called apple support and they wanted $49.00 just to talk to me, which I found very lame!
    Please someone help, I work from home and cant work because of this.
    J

    Hi,
    Please let me know which OS and IE version you are using.
    Have you tried other browsers?
    Thank you.
    Hisami

Maybe you are looking for

  • How to restrict the authorization to change backgroud configuration

    hello , I copy some users from my admin user which contain the sap_all profile. so these uses can change background configuration.     now,  I want to restrict the authorization that they can only view the background configuration but can not change

  • Boundary lines showing in PDF

    I hope this is the right place to post this. If not, would someone tell me the best forum on which to post it? Some of my finished PDFs have boundary lines showing around--or sometimes even within--text boxes filled with color. The files were created

  • How do I remove the Adobe Download Assistant?

    To remove the Adobe Download Assistant you will want to use the same methods you would use for other Applications. For Windows XP: Choose Start > Control Panel > Add Or Remove Programs. Select Adobe Download Assistant and click Remove. For Windows 7

  • Accessing SAP HANA table via Lumira

    Hi folks, I just tried to access a table in HANA via SAP Lumira. Unfortunately I´m just able to access Analytic Views and Calc Views with SYSTEM user per default. Which rights are necessary to grant to the user to get access. It worked with PA on ano

  • Aperture 3: Watermarks with Facebook, Flickr, and MobileMe

    I am pleased that Apple has released Aperture 3. I have not had the chance to download the 30-day trial or play with it in an Apple store yet. For those of you who have, do you know if Apple has enabled (visible) watermarking as part of the sharing o