Hourly average for 24 hours file

I have time (0-24 hrs) in X-axis and 1-channel data on Y-axis. These data are not distributed evenly on X-axis. There are different amount of data in each hour. Now, If I want to calculate hourly average based on X-Axis. Are there any clues or equations that I can create for different channel on calculator? Or are there any formulas to calculate average for undistributed data?
Thanks
-mirror82

Hello!
Have a look at the classing functions in DIAdem. They should calculate what you want.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

Similar Messages

Best compression for exporting large files from iMovie for use in iDVD?

I have a doco that I've made as separate projects too slow to make it all in one project - which I then exported as Quicktime .mov files. When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed.
What would be the best compression to apply to the large .mov files but reduce the overall file sizes by say 10%
Its sometimes taking up to 6 hours to render each project average total screentime per project is about 70 minutes and each project file size ranges from 1 to 6GB...
I feel like I'm a little out of my depth on this one!
Any suggestions for this dilemma?
Thanks
Tony

When I assembled the .mov files in iDVD I ended up with 4.7GB of material which iDVD flipped out on and crashed... Any suggestions for this dilemma?
Not sure if your 4.7GB reference is for the source files or the resulting "muxed" MPEG2/PCM encoded content. In any case a single layer DVD is limited to 4.7 GBs of total content. To be safe, this usually means you are limited to 4.2 to 4.3 GB of encoded movie and/or slideshow content depending on how many and what type of menus you are creating created. Thus, if you are encoding for a single-layer DVD and your project encoded content exceeds the capacity of your DVD, then this would likely explain your problem.
If your project size reference is for the source content being added to your iDVD project, then it is totally irrelevant and you need to concentrate on the total duration of your iDVD and the method of encoding instead of file size. Basically, for a single-layer DVD, only about 60 minutes content can be encoded using the "Best Performance" encode option, 90 minutes using the "High Quality" setting, or 2 hours in the "Professional Quality" encode mode. Thus, if your content duration exceeds the capacity of your encoding mode here, it would likely explain your problem.
In either case, the solution would be to either burn to higher capacity optical media/higher capacity encoding mode or burn your content to multiple DVDs as individual projects at the current media capacity/encoding mode.

XML publisher report not generating output for huge XML files

Changed Depreciation Projections Report output type to XML.
Defined a Data Definition and a new Data Template (RTF) for this report.
Ran the Depreciation Projection Report to generate the XML output.
Ran the XML Report Publisher report to generate teh PDF/Excel output of the above report.
Output generated for smaller XML files. When XML size is big, the program is running for hours without generating the output.
Teh RTF template is basically a matrix report in which the number of columns in the report is based on the number of periods the report is run for.
The same is not working in the Desktop version also. The system is hanging when i try to view the preview pdf.
The XML file size is approximately 33 MB.
Please let me know if there is any way we can increase the memory size to see the output.
Thanks,
Ram.

for publisher use Category: E-Business Suite

Capture WAITING FOR DICTIONARY REDO: FILE

Hi Experts,
Based on a large transaction, source A1 database archive action was auto switch for redlog files.
After this event, we destination A2 DB capture get a state---WAITING FOR DICTIONARY REDO: FILE G:\ORACLE\ORADATA\VMSDBSEA\ARCHIVE\ARC10201_0639211808.001.
we use bi-direction stream at oracle10GR4 in 32 bit windoe 2003.
I think that is a capture problem in A2 only. last weekend, stream stop capture process due low SGA.
I restart A2 capture thsi morning.
What do I need to do? just add a new first SCN or register redo file?
Please help me in detail.
I find this case at http://stanford.edu/dept/itss/docs/oracle/10g/server.101/b10727/capture.htm#1006565
1. A capture process is configured to capture changes to tables.
2. A database administrator stops the capture process. When the capture process is stopped, it records the SCN of the change it was currently capturing.
3. User applications continue to make changes to the tables while the capture process is stopped.
4. The capture process is restarted three hours after it was stopped.
However, I do not see how to set new SCN for restart capture.
Thanks,
Jim
Edited by: user589812 on Dec 29, 2008 12:11 PM

i try to register archivelog file and got message as
SQL> ALTER DATABASE REGISTER LOGICAL LOGFILE 'ARC23250_0621282506.001' FOR 'STREAM_CAPTURE';
ALTER DATABASE REGISTER LOGICAL LOGFILE 'ARC23250_0621282506.001' FOR 'STREAM_CAPTURE'
ERROR at line 1:
ORA-01284: file cannot be opened
So what issue?
Thanks
JIm

Need help with conversion progrma for MTS video files. Can't download videos from Sony TX-10 camera

Have new macbook pro 13". Can't download videos from our Sony TX-10 camera. I understand I need some kind of conversion program for MTS video files. Need recommendation for a good conversion program to convert the video files.
Thanks, chieftd

Well, sigh, that's not going to work.
I love how I can do months of research to choose the best camera for my needs and budget, which is NO easy task these days, but surprisingly find it on the unsupported list when it's a very popular camera. So, while it seems to support a whole bunch of other AVCHD options from Sony, not the NEX cameras.
The NEX cameras are the latest generation of mirrorless cameras (which, ironically, are great b/c they give dSLR quality still images while actually producing HD video that always records silently and stays in focus b/c it's mirrorless). The NEX 7 was just reviewed as Camera of the Year.
Bleh. Oh well. Maybe someday.
And, for anyone reading, Roxio Toast Titanium did convert it just fine but it took about 20 min or my time to set up a handful of clips and then a couple hours to complete converting them for the quality I was looking for. One was about 10 minutes of a kids' performance on Christmas and it took a long time. It's just not feasible given how many video clips I do with the camera a week - well, feasible when you consider all the cameras where this would be seamless.
Thanks for posting your reply - I appreciate it.

Logic for sending data files to multiple instances of Central

We are using Central Pro Output Server 5.6 with a single Central instance as of default installation on a Windows Server 2003. Data for the transaction files coming from our iSeries system via a printer queue (\\.\pipe\jetform\queuename)
Now we want to be able to produce more documents from Central much faster and therefore setting up multiple instances of Central. The problem is then where to put the logic for choosing instances.
The simplest way to do this would be to have iSeries to alternate the data files to different pipes (printer queues) for Central. But as we dont want to change our iSeries configuration for this, is there a way to solve this problem in Central?
Any help with this is much appreciated

Central provides no mechanism that I'm aware of that would do anything resembling the job distribution that you are wanting. Central is written to monitor it's input folders and process the files it finds there. Each instance is essentially separate from each other.
Your source system will need to select the appropriate instance to be used. Either that or you will need to have something between the source system and Central that is doing the distribution. For example, you could have the source system write to a folder that is not being monitored by Central and write a program that runs as a service that does monitor that folder. This program would then distribute the files. The likely drawback of having an intermediary program is that you are likely to not end up getting the documents printed any faster than with a single instance.
Another possible way, if the source system can create files with different file name extensions, would be to have them all written to the same folder and have each instance checking that particular folder but looking for files with different extensions. This might be problematic, though, because it might also end up with each instance watching the same "control" folder so that doing things like pausing Central would end up with no control of which instance was going to be paused.
The default setting for Central has it pausing for 5 seconds if it completes a job and there are no more files waiting for it. If your jobs are not coming in faster than Central is processing them then you would be getting some of this delay for your jobs. You could reduce this time or even set Central to process a job as soon as it shows up. I don't know if version 5.6 still has the problem but an earlier version would not "see" a file if it happened to show up exactly when it was looking for more (it was probably showing up milli-seconds after Central looked). This caused that job to just sit there until the next job showed up.
A major factor in getting the documents produced faster is going to be the speed and number of printers that they are going to - plus the number of pages in each document. For us, the single instance of Central that we are currently using can produce print much faster than our HP9050 printers (50 ppm) can actually print it.
You must be doing a lot of forms or each job is doing a lot of processing. Our typical print job does 4 tasks (depending on the job this can include things like: passing the file through the transformation agent, updating a mainframe database, FTPing the file to another server for archiving, and producing the print). A typical job with 11 output pages takes only 2-3 seconds. We have a task that runs every morning that retrieves mainframe generated jobs. I just checked one of our servers and it processed 208 jobs in exactly 8 minutes (26 jobs per minute at an average of 2.3 seconds per job). We also thought we'd need multiple instances due to speed but that just isn't the case for us. We have other reasons to move to multiple instances but speed in not a major factor any more.

Changing the order for printing portfolio files in adobe acrobat 9 pro

Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't work for me. Any ideas? Thanks.

Question1: No.
Question2: No.

Does the online function cater for a PDF file created in version 9 to be converted to version 6

I am running Win98SE on one computer (A) and WindowsXP on another computer (B).
On Computer A I am running Adobe Reader 6.06.
On Computer B I am running Adobe Reader 9
Is there a methodology (presumably outside of Adobe Reader) to convert a version 9 file to a version 6 file so that it can be opened in Computer A?
Microsoft Office Word/Excel for example allows files created in current versions of Office to be opened in the current version and saved as an earlier version.
Does one have to buy the full Adobe Acrobat package to get a similar function?

No. Reader is just that a reader of pdf files. You would need Acrobat Standard or Pro to change a file to be read by an earlier version.

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

Is there support for animated .gif files?

Is there support for animated gif files using
form builder? I can't get it to work.
Thanks
Sean
I am using forms 6.0

She used the Link Tool, specfied 'Image URL' as the Source File Format and the url of the animated GIF in the Source Filename. Hope that helps.
Makes sense but the form is not for the web.
I have looked at doing it with timers and switching canvases, but that is just too much
for sloppy animation. It's just not tight enough.
Thanks,
Sean
null

Writing a java program for generating .pdf file with the data of MS-Excel .

Hi all,
My object is write a java program so tht...it'll generate the .pdf file after retriving the data from MS-Excel file.
I used POI HSSF to read the data from MS-Excel and used iText to generate .pdf file:
My Program is:
* Created on Apr 13, 2005
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
package forums;
import java.io.*;
import java.awt.Color;
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import com.lowagie.text.Font.*;
import com.lowagie.text.pdf.MultiColumnText;
import com.lowagie.text.Phrase.*;
import net.sf.hibernate.mapping.Array;
import org.apache.poi.hssf.*;
import org.apache.poi.poifs.filesystem.*;
import org.apache.poi.hssf.usermodel.*;
import com.lowagie.text.Phrase.*;
import java.util.Iterator;
* Generates a simple 'Hello World' PDF file.
* @author blowagie
public class pdfgenerator {
     * Generates a PDF file with the text 'Hello World'
     * @param args no arguments needed here
     public static void main(String[] args) {
          System.out.println("Hello World");
          Rectangle pageSize = new Rectangle(916, 1592);
                    pageSize.setBackgroundColor(new java.awt.Color(0xFF, 0xFF, 0xDE));
          // step 1: creation of a document-object
          //Document document = new Document(pageSize);
          Document document = new Document(pageSize, 132, 164, 108, 108);
          try {
               // step 2:
               // we create a writer that listens to the document
               // and directs a PDF-stream to a file
               PdfWriter writer =PdfWriter.getInstance(document,new FileOutputStream("c:\\weeklystatus.pdf"));
               writer.setEncryption(PdfWriter.STRENGTH128BITS, "Hello", "World", PdfWriter.AllowCopy | PdfWriter.AllowPrinting);
//               step 3: we open the document
                         document.open();
               Paragraph paragraph = new Paragraph("",new Font(Font.TIMES_ROMAN, 13, Font.BOLDITALIC, new Color(0, 0, 255)));
               POIFSFileSystem pofilesystem=new POIFSFileSystem(new FileInputStream("D:\\ESM\\plans\\weekly report(31-01..04-02).xls"));
               HSSFWorkbook hbook=new HSSFWorkbook(pofilesystem);
               HSSFSheet hsheet=hbook.getSheetAt(0);//.createSheet();
               Iterator rows = hsheet.rowIterator();
                              while( rows.hasNext() ) {
                                   Phrase phrase=new Phrase();
                                   HSSFRow row = (HSSFRow) rows.next();
                                   //System.out.println( "Row #" + row.getRowNum());
                                   // Iterate over each cell in the row and print out the cell's content
                                   Iterator cells = row.cellIterator();
                                   while( cells.hasNext() ) {
                                        HSSFCell cell = (HSSFCell) cells.next();
                                        //System.out.println( "Cell #" + cell.getCellNum() );
                                        switch ( cell.getCellType() ) {
                                             case HSSFCell.CELL_TYPE_STRING:
                                             String stringcell=cell.getStringCellValue ()+" ";
                                             writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                             phrase.add(stringcell);
                                        // document.add(new Phrase(string));
                                                  System.out.print( cell.getStringCellValue () );
                                                  break;
                                             case HSSFCell.CELL_TYPE_FORMULA:
                                                       String stringdate=cell.getCellFormula()+" ";
                                                       writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                       phrase.add(stringdate);
                                             System.out.print( cell.getCellFormula() );
                                                       break;
                                             case HSSFCell.CELL_TYPE_NUMERIC:
                                             String string=String.valueOf(cell.getNumericCellValue())+" ";
                                                  writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                  phrase.add(string);
                                                  System.out.print( cell.getNumericCellValue() );
                                                  break;
                                             default:
                                                  //System.out.println( "unsuported sell type" );
                                                  break;
                                   document.add(new Paragraph(phrase));
                                   document.add(new Paragraph("\n \n \n"));
               // step 4: we add a paragraph to the document
          } catch (DocumentException de) {
               System.err.println(de.getMessage());
          } catch (IOException ioe) {
               System.err.println(ioe.getMessage());
          // step 5: we close the document
          document.close();
My Input from MS-Excel file is:
     Planning and Tracking Template for Interns
     Name of the Intern     N.Kesavulu Reddy
     Project Name     Enterprise Sales and Marketing
     Description     Estimated Effort in Hrs     Planned/Replanned          Actual          Actual Effort in Hrs     Complexity     Priority     LOC written new & modified     % work completion     Status     Rework     Remarks
S.No               Start Date     End Date     Start Date     End Date
1     setup the configuration          31/01/2005     1/2/2005     31/01/2005     1/2/2005
2     Deploying an application through Tapestry, Spring, Hibernate          2/2/2005     2/2/2005     2/2/2005     2/2/2005
3     Gone through Componentization and Cxprice application          3/2/2005     3/2/2005     3/2/2005     3/2/2005
4     Attend the sessions(tapestry,spring, hibernate), QBA          4/2/2005     4/2/2005     4/2/2005     4/2/2005
     The o/p I'm gettint in .pdf file is:
Planning and Tracking Template for Interns
N.Kesavulu Reddy Name of the Intern
Enterprise Sales and Marketing Project Name
Remarks Rework Status % work completion LOC written new & modified Priority
Complexity Actual Effort in Hrs Actual Planned/Replanned Estimated Effort in Hrs Description
End Date Start Date End Date Start Date S.No
38354.0 31/01/2005 38354.0 31/01/2005 setup the configuration 1.0
38385.0 38385.0 38385.0 38385.0 Deploying an application through Tapestry, Spring, Hibernate
2.0
38413.0 38413.0 38413.0 38413.0 Gone through Componentization and Cxprice application
3.0
38444.0 38444.0 38444.0 38444.0 Attend the sessions(tapestry,spring, hibernate), QBA 4.0
                                   The issues i'm facing are:
When it is reading a row from MS-Excel it is writing to the .pdf file from last cell to first cell.( 2 cell in 1 place, 1 cell in 2 place like if the row has two cells with data as : Name of the Intern: Kesavulu Reddy then it is writing to the .pdf file as Kesavulu Reddy Name of Intern)
and the second issue is:
It is not recognizing the date format..it is recognizing the date in first row only......
Plz Tell me wht is the solution for this...
Regards
[email protected]

Don't double post your question:
http://forum.java.sun.com/thread.jspa?threadID=617605&messageID=3450899#3450899
/Kaj

Open module for managing property file and environment variables

Looking for an open module for managing property files and environment variables (like CLASSPATH) set in a shell script. For handeling properties (preserving comments, supporting includes, appending new entries, and more) I have looked at SuperProperties from openadaptor but find certain functionality lacking. As for interfacing with common shell scripts/files containing setting for CLASSPATH, JAVA_HOME, other system/application variables another type of object editor is needed. Maybe JFIG?
Any ideas are greatly welcomed.

You seem wright, you hit a brick wall here with Air to find the location
of the command console on windows...
So in fact I never build an exe tool, but this little problem was a nice
case to test it and I tried it.:
I downloaded monodevelop
-GTK# for .NET 2.12.10*
-MonoDevelop 2.4.2*
from http://monodevelop.com/Download
created a console project and had an exe in 5 minutes !
You can download the findconsole tool and the projectfiles here:
http://greencollective.nl/temp/dump/findconsole_monoproject.zip
findconsole.exe will reveal the path/location of cmd.exe on a windows system.
Cheers,
Latcho

Crash on search function for HTML Help file (.chm) when connected to a Visual C++ application

Crash on search function for HTML Help file (.chm) when
connected to a Visual C++ application
I use the RH_ShowHelp API command to connect a HTML Help file
(.chm file generated by RoboHelp Word X 5) to my Visual C++
application. My application is able to call up this HTML help file
in context-sensitive mode and everything is working great in the
Contents and Index panels EXCEPT when I click on List Topics (after
I enter a KEYWORD for search) in the Search panel.
I got an error that said “Unhandled exception in
xxxx.exe.(HHCTRL.OCX):0xC00000FD: Stack overflow”
I am able to execute this .chm file by itself and the search
function works well in this case. I am using HHActiveX.dll that is
created on 2/23/04. Is this the correct version?? Any advice what
to do here??

Hi agschin and welcome to the RH forums. The hhactivex.dll
file is not used by the search function so you can rule that our.
Have you tried recompiling and seeing if the problem still happens?
You can also start the Bug Hunter feature in RH - View > Output
View and then select the Bug Hunter button - and see if that throws
up any clues.

How do I change or remove default apps for a given file extension (in Terminal?) without munging date modified on all my old files?

When a program is installed, it seems to be able to do it (sometimes inappropriately if it hijacks file associations without asking) so why can't I? This is for 10.4.
Specifically:
1. Since installing an HP wireless printer, HP not only tries to install a bunch of sales-ware on your machine that you have to carefully opt out of (annoying, but not a problem if forewarned), it changes the default file association for a number of basic file types, listing all sort of existing files as HP printer files. Using Get Info to change the default file type association globally causes it to mark ALL the files of that type as newly updated, munging the file metdata (which HP did NOT do). Most of the stuff on our computer is sorted by last modified, so if there is a way to fix this in Terminal (to simply fix or remove the HP default tag) without changing the date the file was modified, it would help. Note that uninstalling the program that created the default would do this, but I obviously can't do that (and reinstalling HP would have the same effect). So there has to be another way, right?
2. Since updating iTunes to v.9 a while back, every mp3 is marked as an iTunes file even though iTunes has NO multiple library capability without a wonky reboot using the option key, meaning that if I click on an mp3 downloaded since last update of iTunes, it opens automatically in iTunes and gets added to the SOLE itunes library without asking. (There is no way to toggle between multiple libraries or archive media in separate folders; iPhoto has a similar problem. (Has this been fixed in the latest version of iTunes?) In comparison, Quicktime starts up immediately and does not attempt to create a playlist just because you opened a file and listened to it.
(The iTunes playlists are simply subfolders of the single main library -- and you can't create a new library without doing a wonky procedure by clicking option during startup and telling iTunes to forget where its library is located (includin everything in it) and look up an entirely separate one by hand. So any mp3 file downloaded recently is uploaded to iTunes if you click on it. This wouldn't be problem if it didn't automatically add it to the sole iTunes library just because you clicked on it.)
Besides, all my old mp3s are Quicktime files and they are all archived by date modified. To its credit, ITunes, unlike HP, does NOT hijack older files already on disk and remark them as iTunes files. It only marks newly downloaded files as such. But if I try and change file association for FUTURE mp3 files using Get Info > "use this program for all files of this type", it munges the file metadata (date modified) for all existing files!
Note that in HP case, it apparently does it at the file exchange preference level (or whatever it's called) since the OS then recognizes every file of those types as an HP file. In the iTunes case, it only does it if you download a new media file or open an existing file in iTunes, but again without changing the date it was last edited.
Since these programs are able to change the default file association without changing the date the file was last edited, it should be reversible in Terminal, correct? Why does it change "date modified" when you try and correct metadata using Get Info (or sometimes just by clicking an enclosing folder?) Date modified should be a record of when a file itself was edited, not when it was renamed, or other metadata. Otherwise stuff can't be sorted correctly.

The unix commands you need are:
GetFileInfo
SetFileInfo
and maybe find
for cryptic details use the man command
Macintosh-HD -> Applications -> Utilities -> Terminal
man SetFileInfo
You may use the SetFileInfo command to set the file type & the program which will open the file.
# This little gem will do a get info on all files in a directory.
mac $ ls | xargs -I {} GetFileInfo "{}"
file: "/Users/mac/playdoc/oddadocodd"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:53:22
modified: 05/01/2011 14:53:22
file: "/Users/mac/playdoc/one.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:48
modified: 05/01/2011 13:57:48
file: "/Users/mac/playdoc/oneLineFile"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:17
modified: 05/07/2011 14:27:17
file: "/Users/mac/playdoc/oneLineFile.txt"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:49
modified: 05/07/2011 14:27:49
file: "/Users/mac/playdoc/three.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:58:03
modified: 05/01/2011 13:58:03
file: "/Users/mac/playdoc/two.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
file: "/Users/mac/playdoc/weirder.doc.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:50:03
modified: 05/01/2011 14:50:03
# well, ! is a funnie character so we escape it.
mac $ SetFile -t TEXT -c \!Rch two.docx
mac $ GetFileInfo two.docx
file: "/Users/mac/playdoc/two.docx"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
mac $
mac $ date
Sat May 7 14:40:56 EDT 2011
mac $

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Hourly average for 24 hours file

Similar Messages

Maybe you are looking for