How can detect the serial port is active

I made a program. It can read datas via serial port. But the datas wont came all the time, so the other part of the program not need to run. I want to put before the "reading serial port" a detection about the serial port is get a data. So the reading is wont start before datas are not coming. Can anybody help me how can i solve this problem?

Hi Zoyo, if you use the VISA- VIs, the functionyou need is "VISA Bytes at serial port". It shows, how many Bytes are available in the input buffer. You can find it here:
greets, Dave
Message Edited by daveTW on 11-22-2006 02:01 PM
Greets, Dave
Attachments:
Bytes at serial port.png ‏20 KB

Similar Messages

How to access the serial port in Java?

How can I initialise and access the serial port for writing and reading data from it? Are there any code examples available?

I tried that and I tried compiling and executing one of its examples, the one below:
import java.io.*;
import java.util.*;
import javax.comm.*;
public class SimpleWrite {
static Enumeration portList;
static CommPortIdentifier portId;
static String messageString = "Hello, world!\n";
static SerialPort serialPort;
static OutputStream outputStream;
public static void main(String[] args) {
portList = CommPortIdentifier.getPortIdentifiers();
while (portList.hasMoreElements()) {
portId = (CommPortIdentifier) portList.nextElement();
if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) {
if (portId.getName().equals("COM1")) {
//if (portId.getName().equals("/dev/term/a")) {
try {
serialPort = (SerialPort)
portId.open("SimpleWriteApp", 2000);
} catch (PortInUseException e) {}
try {
outputStream = serialPort.getOutputStream();
} catch (IOException e) {}
try {
serialPort.setSerialPortParams(9600,
SerialPort.DATABITS_8,
SerialPort.STOPBITS_1,
SerialPort.PARITY_NONE);
} catch (UnsupportedCommOperationException e) {}
try {
outputStream.write(messageString.getBytes());
} catch (IOException e) {}
But when I execute this I get the error:
Exception in thread "main" java.lang.NoClassDefFoundError: SimpleWrite
What is wrong with this example??

How to use the serial port

hello
I would like to know if there is other library than comm to use to establish communication with the serial port ..
can we do this with pure java ,I mean without the need of using any library ???
if not then what is the best library to use ???
any examples ??
I have other question
when i use the library comm
I use the public void serialEvent(SerialPortEvent event) to get my data
but that data comme line by line
is there a way to get all the data at once ???
than kyou in advance

There you go
http://java.sun.com/products/javacomm/
Some extra resources
http://www.google.co.in/search?q=java+access+serial+po
rt&start=0&ie=utf-8&oe=utf-8&client=firefox-a&rls=org.
mozilla:en-US:officialmaybe I was not clear ,I know the comm lib
Im already using it
but am asking if there any other lib that will work for windows
thank you

How to access the serial port on sdk 3.1.3 ?

Hi all,
I know that accessing serial port is not possible on firmware 2.x for non jailbroken iPhones.
But what about firmware 3.0?
Apple has focused firmware 3.0 on accessories, through bluetooth or through serial port. So, accessing serial port should be possible.
But I can't find any documentation / sample code for that.
Would you please help me?
Regards,
Alx
PS: I tried to read the port /dev/cu.iap and get this message:
Error opening serial port /dev/cu.iap - Permission denied(13).
Looks bad.

Yes I am enregistred in the Mad For iPod program?
And I try to communique with my accessorie
So the Code
+*// SerialPortsModuleAppDelegate.m*+
+*// SerialPortsModule*+
+*// Created by BPO iMac on 08/02/10.*+
+*// Copyright _MyCompanyName_ 2010. All rights reserved.*+
+*#import "SerialPortsModuleAppDelegate.h"*+
+*#import <fcntl.h>*+
+*@implementation SerialPortsModuleAppDelegate*+
+*@synthesize window;*+
+*- (void)applicationDidFinishLaunching:(UIApplication *)application {*+
+*// Override point for customization after application launch*+
+*[window makeKeyAndVisible];*+
+* portSerie = [SerialManager alloc];*+
+* [portSerie init];*+
+* int nb_port;*+
+* nb_port = [portSerie findRS232Ports];*+
+* NSString path_port;+
+* path_port = [NSString alloc];*+
+* int num_port;*+
+* if(nb_port!=0)*+
+* {*+
+* num_port=0;*+
+* path_port=[portSerie pathAtIndex:num_port];*+
+* int resultat= [portSerie openInput:path_port baudrate:9600 bits:8 parity:0 stopbits:1 flags:O_RDONLY];*+
+* if(resultat==-1)*+
+* {*+
+* NSLog(@"Communication Error");*+
+* }*+
+* resultat= [portSerie openOutput:path_port baudrate:9600 bits:8 parity:0 stopbits:1];*+
+* if(resultat==-1)*+
+* {*+
+* NSLog(@"Communication Error");*+
+* }*+
+* }*+
+* [path_port release];*+
+* *+
+*- (void)dealloc {*+
+*[window release];*+
+*[super dealloc];*+
@end
+*// SerialPortsModuleAppDelegate.h*+
+*// SerialPortsModule*+
+*// Created by BPO iMac on 08/02/10.*+
+*// Copyright _MyCompanyName_ 2010. All rights reserved.*+
+*#import <UIKit/UIKit.h>*+
+*#import "SerialManager.h"*+
+*@interface SerialPortsModuleAppDelegate : NSObject <UIApplicationDelegate> {*+
+*UIWindow window;+
+* SerialManager portSerie;+
+*@property (nonatomic, retain) IBOutlet UIWindow window;+
@end
+*// SerialManager.m*+
+*// K3 Tools*+
+*// Created by Kok Chen on 4/28/09.*+
+*// Copyright 2009 Kok Chen, W7AY. All rights reserved.*+
+*#import "SerialManager.h"*+
+*#include <unistd.h>*+
+*#include <termios.h>*+
+*#include <sys/ioctl.h>*+
+*#include <IOKit/IOKitLib.h>*+
+*#include <IOKit/serial/IOSerialKeys.h>*+
+*#import <fcntl.h>*+
+*#import <UIKit/UIKit.h>*+
+*@implementation SerialManager*+
+*- (id)init*+
+* self = [ super init ] ;*+
+* if ( self ) {*+
+* termiosBits = -1 ;*+
+* inputfd = outputfd = -1 ;*+
+* useTermiosThread = NO ;*+
+* needsNotification = NO ;*+
+* termioLock = [ [ NSLock alloc ] init ] ;*+
+* }*+
+* return self ;*+
+*static int findPorts( CFStringRef *stream, CFStringRef *path, int maxDevice, CFStringRef type )*+
+*kernreturnt kernResult ;*+
+*machportt masterPort ;*+
+* ioiteratort serialPortIterator ;*+
+* ioobjectt modemService ;*+
+*CFMutableDictionaryRef classesToMatch ;*+
+* CFStringRef cfString ;*+
+* int count ;*+
+*kernResult = IOMasterPort( MACHPORTNULL, &masterPort ) ;*+
+*if ( kernResult != KERN_SUCCESS ) return 0 ;*+
+* *+
+*classesToMatch = IOServiceMatching( kIOSerialBSDServiceValue ) ;*+
+*if ( classesToMatch == NULL ) return 0 ;*+
+* *+
+* // get iterator for serial ports (including modems)*+
+* CFDictionarySetValue( classesToMatch, CFSTR(kIOSerialBSDTypeKey), type ) ;*+
+*kernResult = IOServiceGetMatchingServices( masterPort, classesToMatch, &serialPortIterator ) ;*+
+* // walk through the iterator*+
+* count = 0 ;*+
+* while ( ( modemService = IOIteratorNext( serialPortIterator ) ) ) {*+
+* if ( count >= maxDevice ) break ;*+
+*cfString = IORegistryEntryCreateCFProperty( modemService, CFSTR(kIOTTYDeviceKey), kCFAllocatorDefault, 0 ) ;*+
+*if ( cfString ) {*+
+* stream[count] = cfString ;*+
+* cfString = IORegistryEntryCreateCFProperty( modemService, CFSTR(kIOCalloutDeviceKey), kCFAllocatorDefault, 0 ) ;*+
+* if ( cfString ) {*+
+* path[count] = cfString ;*+
+* count++ ;*+
+* }*+
+* }*+
+*IOObjectRelease( modemService ) ;*+
+* IOObjectRelease( serialPortIterator ) ;*+
+* return count ;*+
+*// return number of ports*+
+*- (int)findPorts:(CFStringRef)type*+
+* CFStringRef cstream[64], cpath[64] ;*+
+* int i ;*+
+* *+
+* numberOfPorts = findPorts( cstream, cpath, 64, type ) ;*+
+* for ( i = 0; i < numberOfPorts; i++ ) {*+
+* stream = [ [ NSString stringWithString:(NSString*)cstream ] retain ] ;*+
+* CFRelease( cstream ) ;*+
+* path = [ [ NSString stringWithString:(NSString*)cpath ] retain ] ;*+
+* CFRelease( cpath ) ;*+
+* }*+
+* return numberOfPorts ;*+
+*- (int)findPorts*+
+* return [ self findPorts:CFSTR( kIOSerialBSDAllTypes ) ] ;*+
+*- (int)findModems*+
+* return [ self findPorts:CFSTR( kIOSerialBSDModemType ) ] ;*+
+*- (int)findRS232Ports*+
+* return [ self findPorts:CFSTR( kIOSerialBSDRS232Type ) ] ;*+
+*- (NSString)streamAtIndex:(int)n+
+* if ( n < 0 || n >= numberOfPorts ) return nil ;*+
+* return stream[n] ;*+
+*- (NSString)pathAtIndex:(int)n+
+* if ( n < 0 || n >= numberOfPorts ) return nil ;*+
+* return path[n] ;*+
+*// common function to open port and set up serial port parameters*+
+*static int openPort( NSString *path, int speed, int bits, int parity, int stops, int openFlags, Boolean input )*+
+* int fd, cflag ;*+
+* struct termios termattr ;*+
+* *+
+* fd = open( [ path cStringUsingEncoding:NSASCIIStringEncoding], openFlags ) ;*+
+* if ( fd < 0 ) return -1 ;*+
+* *+
+* // build other flags*+
+* cflag = 0 ;*+
+* cflag |= ( bits == 7 ) ? CS7 : CS8 ; // bits*+
+* if ( parity != 0 ) {*+
+* cflag |= PARENB ; // parity*+
+* if ( parity == 1 ) cflag |= PARODD ;*+
+* }*+
+* if ( stops > 1 ) cflag |= CSTOPB ;*+
+* *+
+* // merge flags into termios attributes*+
+* tcgetattr( fd, &termattr ) ;*+
+* termattr.c_cflag &= ~( CSIZE | PARENB | PARODD | CSTOPB ) ; // clear all bits and merge in our selection*+
+* termattr.c_cflag |= cflag ;*+
+* *+
+* // set speed, split speed not support on Mac OS X?*+
+* cfsetispeed( &termattr, speed ) ;*+
+* cfsetospeed( &termattr, speed ) ;*+
+* // set termios*+
+* tcsetattr( fd, TCSANOW, &termattr ) ;*+
+* return fd ;*+
+*- (int)openInput:(NSString*)pathname baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops flags:(int)openFlags*+
+* return ( inputfd = openPort( pathname, speed, bits, parity, stops, openFlags, YES ) ) ;*+
+*- (int)openInput:(NSString*)pathname baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops*+
+* return ( inputfd = openPort( pathname, speed, bits, parity, stops, ( O_RDONLY | O_NOCTTY | O_NDELAY ), YES ) ) ;*+
+*- (int)openOutput:(NSString*)pathname baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops flags:(int)openFlags*+
+* return ( outputfd = openPort( pathname, speed, bits, parity, stops, openFlags, NO ) ) ;*+
+*- (int)openOutput:(NSString*)pathname baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops*+
+* return ( outputfd = openPort( pathname, speed, bits, parity, stops, ( O_WRONLY | O_NOCTTY | O_NDELAY ), NO ) ) ;*+
+*- (void)closeInput*+
+* if ( inputfd > 0 ) close( inputfd ) ;*+
+*- (void)closeOutput*+
+* if ( outputfd > 0 ) close( outputfd ) ;*+
+*- (int)inputFileDescriptor*+
+* return inputfd ;*+
+*- (int)outputFileDescriptor*+
+* return outputfd ;*+
+*- (int)getTermios*+
+* int bits ;*+
+* *+
+* if ( inputfd > 0 ) {*+
+* [ termioLock lock ] ;*+
+* ioctl( inputfd, TIOCMGET, &bits ) ;*+
+* [ termioLock unlock ] ;*+
+* return bits ;*+
+* }*+
+* return 0 ;*+
+*- (void)setRTS:(Boolean)state*+
+* int bits ;*+
+* if ( inputfd > 0 ) {*+
+* [ termioLock lock ] ;*+
+* ioctl( inputfd, TIOCMGET, &bits ) ;*+
+* if ( state ) bits |= TIOCM_RTS ; else bits &= ~( TIOCM_RTS ) ;*+
+* ioctl( inputfd, TIOCMSET, &bits ) ;*+
+* [ termioLock unlock ] ;*+
+* }*+
+*- (void)setDTR:(Boolean)state*+
+* int bits ;*+
+* if ( inputfd > 0 ) {*+
+* [ termioLock lock ] ;*+
+* ioctl( inputfd, TIOCMGET, &bits ) ;*+
+* if ( state ) bits |= TIOCM_DTR ; else bits &= ~( TIOCM_DTR ) ;*+
+* ioctl( inputfd, TIOCMSET, &bits ) ;*+
+* [ termioLock unlock ] ;*+
+* }*+
+*// IO Notifications*+
+*// prototype for delegate*+
+*- (void)port:(NSString*)name added:(Boolean)added*+
+* if ( delegate && [ delegate respondsToSelector:@selector(port:added:) ] ) [ delegate port:name added:added ] ;*+
+*// this is called from deviceAdded() and deviceRemoved() callbacks*+
+*- (void)portsChanged:(Boolean)added iterator:(ioiteratort)iterator*+
+* ioobjectt modemService ;*+
+* CFStringRef cfString ;*+
+* while ( ( modemService = IOIteratorNext( iterator ) ) > 0 ) {*+
+* cfString = IORegistryEntryCreateCFProperty( modemService, CFSTR( kIOTTYDeviceKey ), kCFAllocatorDefault, 0 ) ;*+
+* if ( cfString ) {*+
+* [ self port:(NSString*)cfString added:added ] ;*+
+* CFRelease( cfString ) ;*+
+* }*+
+* IOObjectRelease( modemService ) ;*+
+* }*+
+*// callback notification when device added*+
+*static void deviceAdded(void *refcon, ioiteratort iterator )*+
+* ioobjectt modemService ;*+
+* *+
+* if ( refcon ) [ (SerialManager*)refcon portsChanged:YES iterator:iterator ] ;*+
+* else {*+
+* while ( modemService = IOIteratorNext( iterator ) ) IOObjectRelease( modemService ) ;*+
+* }*+
+*static void deviceRemoved(void *refcon, ioiteratort iterator )*+
+* ioobjectt modemService ;*+
+* *+
+* if ( refcon ) [ (SerialManager*)refcon portsChanged:NO iterator:iterator ] ;*+
+* else {*+
+* while ( modemService = IOIteratorNext( iterator ) ) IOObjectRelease( modemService ) ;*+
+* }*+
+*- (void)startNotification*+
+* CFMutableDictionaryRef matchingDict ;*+
+* *+
+* notifyPort = IONotificationPortCreate( kIOMasterPortDefault ) ;*+
+* CFRunLoopAddSource( CFRunLoopGetCurrent(), IONotificationPortGetRunLoopSource( notifyPort ), kCFRunLoopDefaultMode ) ;*+
+* matchingDict = IOServiceMatching( kIOSerialBSDServiceValue ) ;*+
+* CFRetain( matchingDict ) ;*+
+* CFDictionarySetValue( matchingDict, CFSTR(kIOSerialBSDTypeKey), CFSTR( kIOSerialBSDAllTypes ) ) ;*+
+* *+
+* IOServiceAddMatchingNotification( notifyPort, kIOFirstMatchNotification, matchingDict, deviceAdded, self, &addIterator ) ;*+
+* deviceAdded( nil, addIterator ) ; // set up addIterator*+
+* IOServiceAddMatchingNotification( notifyPort, kIOTerminatedNotification, matchingDict, deviceRemoved, self, &removeIterator ) ;*+
+* deviceRemoved( nil, removeIterator ) ; // set up removeIterator*+
+*- (void)stopNotification*+
+* if ( addIterator ) {*+
+* IOObjectRelease( addIterator ) ;*+
+* addIterator = 0 ;*+
+* }*+
+* if ( removeIterator ) {*+
+* IOObjectRelease( removeIterator ) ;*+
+* removeIterator = 0 ;*+
+* }*+
+* if ( notifyPort ) {*+
+* CFRunLoopRemoveSource( CFRunLoopGetCurrent(), IONotificationPortGetRunLoopSource( notifyPort ), kCFRunLoopDefaultMode ) ;*+
+* IONotificationPortDestroy( notifyPort ) ;*+
+* notifyPort = nil ;*+
+* }*+
+*// prototype for delegate or subclass*+
+*- (void)controlFlagsChanged:(int)termbits*+
+* if ( delegate && [ delegate respondsToSelector:@selector(controlFlagsChanged:) ] ) [ delegate controlFlagsChanged:termbits ] ;*+
+*- (void)termiosThread*+
+* NSAutoreleasePool *pool = [ [ NSAutoreleasePool alloc ] init ] ;*+
+* int termbits ;*+
+* while ( 1 ) {*+
+* if ( useTermiosThread == NO ) break ;*+
+* if ( inputfd > 0 ) {*+
+* if ( [ termioLock tryLock ] ) {*+
+* ioctl( inputfd, TIOCMGET, &termbits ) ;*+
+* if ( termiosBits != termbits ) [ self controlFlagsChanged:termbits ] ;*+
+* termiosBits = termbits ;*+
+* [ termioLock unlock ] ;*+
+* }*+
+* [ NSThread sleepUntilDate:[ NSDate dateWithTimeIntervalSinceNow:0.25 ] ] ;*+
+* }*+
+* else {*+
+* [ NSThread sleepUntilDate:[ NSDate dateWithTimeIntervalSinceNow:1.0 ] ] ;*+
+* }*+
+* }*+
+* [ pool release ] ;*+
+*// If delegate is set, setDelegate also starts a termiosThread if delegate responds to -controlFlagsChanged:*+
+*- (void)setDelegate:(id)object*+
+* delegate = object ;*+
+* if ( delegate == nil ) {*+
+* useTermiosThread = NO ;*+
+* if ( needsNotification ) {*+
+* needsNotification = NO ;*+
+* [ self stopNotification ] ;*+
+* }*+
+* }*+
+* else {*+
+* if ( [ delegate respondsToSelector:@selector(controlFlagsChanged:) ] ) {*+
+* useTermiosThread = YES ;*+
+* [ NSThread detachNewThreadSelector:@selector(termiosThread) toTarget:self withObject:nil ] ;*+
+* } *+
+* if ( [ delegate respondsToSelector:@selector(port:added:) ] ) {*+
+* needsNotification = YES ;*+
+* [ self startNotification ] ;*+
+* }*+
+* }*+
+*- (id)delegate*+
+* return delegate ;*+
@end
+*// SerialManager.h*+
+*// K3 Tools*+
+*// Created by Kok Chen on 4/28/09.*+
+*// Copyright 2009 Kok Chen, W7AY. All rights reserved.*+
+*//#import <Cocoa/Cocoa.h>*+
+*#import <Foundation/Foundation.h>*+
+*#import <UIKit/UIKit.h>*+
+*#import <CoreData/CoreData.h>*+
+*//#import <IOKit/IOKitLib.h>*+
+*//#import <IOKitLib.h>*+
+*#include <IOKit/IOKitLib.h>*+
+*typedef int FileDescriptor ;*+
+*@interface SerialManager : NSObject {*+
+* NSLock *termioLock ;*+
+* FileDescriptor outputfd ;*+
+* FileDescriptor inputfd ;*+
+* id delegate ;*+
+* // serial ports in system*+
+* NSString *stream[64] ;*+
+* NSString *path[64] ;*+
+* int numberOfPorts ;*+
+* *+
+* // termios*+
+* int termiosBits ;*+
+* Boolean useTermiosThread ;*+
+* *+
+* // IO notifications*+
+* IONotificationPortRef notifyPort ;*+
+* ioiteratort addIterator, removeIterator ;*+
+* Boolean needsNotification ;*+
+*- (void)setDelegate:(id)sender ;*+
+*- (int)findPorts ;*+
+*- (int)findModems ;*+
+*- (int)findRS232Ports ;*+
+*- (NSString*)streamAtIndex:(int)n ;*+
+*- (NSString*)pathAtIndex:(int)n ;*+
+*- (FileDescriptor)openInput:(NSString*)path baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops ;*+
+*- (FileDescriptor)openInput:(NSString*)path baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops flags:(int)openFlags ;*+
+*- (FileDescriptor)openOutput:(NSString*)path baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops ;*+
+*- (FileDescriptor)openOutput:(NSString*)path baudrate:(int)speed bits:(int)bits parity:(int)parity stopbits:(int)stops flags:(int)openFlags ;*+
+*- (void)closeInput ;*+
+*- (void)closeOutput ;*+
+*- (FileDescriptor)inputFileDescriptor ;*+
+*- (FileDescriptor)outputFileDescriptor ;*+
+*- (int)getTermios ;*+
+*- (void)setRTS:(Boolean)state ;*+
+*- (void)setDTR:(Boolean)state ;*+
+*- (void)setDelegate:(id)object ;*+
+*- (id)delegate ;*+
+*// delegates*+
+*- (void)port:(NSString*)name added:(Boolean)added ;*+
+*- (void)controlFlagsChanged:(int)termbits ;*+
@end
Could you help me ?

How to detect the serial cable been unplugged

Hi all,
I wrote a small application using the javax.comm api to talk to an external device. I would like to know how to detect if the cable is unplugged. Right now, if I run the application with cable not connected, if i start communicate with the device, the program will hang.
The program works fine with connection is there.
Please help me.

there are ways that do what he wants to do (though not what he says he wants to do), but they need to be implemented in hardware.
You could monitor the voltage on some of the pins on the serial connection for example, which tells you whether there's a signal on the line.
That of course would not detect whether the cable is there, as it has preconditions. It detects whether there's a signal on the cable, which requires that the systems on both ends of the cable are powered up and that the cable itself is not faulty.

Is it possible to choose the serial port if only the run time engine is installed

I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example “Hardeware input output -> serial -> Labview serial vi"). When I build an application and try to run this program on a computer where only the run time engine 6.1 is installed, it is not possible to choose the serial port. Since there is no “Measurement and Automation Explorer” available on the run time engine and no directory C:\VXIpnp is created, when the run time engine is installed, I do not see a way, how I can satisfy the computer with the information it needs for configuring
the different ports. Any suggestions?

Hi Daniel,
Before LV6.1 there was LV5.1 In LV5.1 the way to Spedify a resource was to use a string control with correct VIsa Resource Class identifier. For eg. "GPIB0::11" or "ASRL1::INSTR". With Introduction of VISA Resource Name Control and linking with MAX, These names are Available from Pull Down List and Can be Aliased, meaning ASRL1 which is Serial Port 1 can be called COM1 and so on. However the old method still works with all 6.1 Controls. Only thing is you have to make sure you Dont Conflict the Class Names ie Use "GPIB::.." instead of "ASRL..." when addressing Serial Port VI's.
To solve your Problem I would Build a Menu ring with COM1 to COM4 in the Pull Down List.
Next, If I use the Traditonal Serial Port VI wich accepts the Integer as Seria
l Port #. I just Wire the Menu Ring to this VI.(Remember COM1 is 0, COM2 is 1 for this VI)
If I use VISA Config Serial Post. I build an Array Constant with Corresponding VISA Class Names So in our case a String Array Constant of 4 elements "ASRL1::INST" to "ASRL4::INST". I Use Index Array Function With the Index Wired to my Menu Ring. The Array Input Terminal Wired to the Array Constant. The Output of this Array will be correct Visa Class Name Based on slection of my Menu Ring. I can Wire this as Input to my VISA Config Serial Port Vi.
I have attached a Small VI to Illustrate this.
Drawback: You must Predefine what Ports you will Want to Use. Basically you define all the cases.
I hope this Answers your Q!
Good Luck
Mache
Good Luck!
Mache
Attachments:
Serial_Port_Select.vi ‏36 KB

Can't open Serial port in notebook (use Serial to USB)

OTL
use Serial to USB and java communication 2.0, windows 2003
and notebook which has no RS232C port
testing desktop it is done.
notebook does not work....
How can i open serial port in notebook ...

Saludos
tengo el mismo problema, aunque he encontrado algunas
API pero solo tienen soporte para LINUX:
* jsr80 y
* jUSB API
Si tienen alguna solucion haganmela saber.In English via Babelfish (and a little common sense), in case anyone knows a solution:
Greetings, I have the same problem, although I have found some API but they only have support for LINUX:
* jsr80
and
* jUSB API
If they have some solution I'd like to know.

How can I use the output value from SIMPLE PID to write something to the serial port?

I am working on my Senior Design Project that requires the use of incoming compressed air, propotional valves, continuous servo motors, and a serial servo motor microcontroller. I have figured out how to send byte sequences to the microcontroller through LabVIEW using the VISA serial write function. The motors are attached to the valves to control the flow rate. I have created my own simple feedback system using a bunch of case structures but I realized that I am basically trying to recreate the wheel (I basically was writing my own PID VI). I have an older version of LabVIEW (7.0 Express) and theres no way to upgrade or buy the PID toolkit, so I am stuck using the Simple PID VI. Also, the only way the motor works is sending an array of bytes to tell it to turn on/off, direction, and speed. Is there any way I can use the Simple PID VI in conjunction with the VISA SERIAL write function, or is there any other way I can communicate with the serial port using this pid vi? Any information would be appreciated.

Hi gpatel,
you know how to communicate to serial port, but you don't know how to send a value from SimplePID to serial port???
You know how to communicate, but then you don't know how to communicate???
You should explain this in more detail...
Edit:
From you first post you know what values your motor driver is expecting. You know which values the PID.vi is providing. Now all you need is a formula to reshape the values from PID to the motor. It's up to you to make such a formula. Unless you provide any details we cannot give more precise answers...
Message Edited by GerdW on 02-28-2010 08:35 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I want to transfer data through the serial port in the same coding that hyperterminal uses. How can i do it?

The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.

nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands?

How can an image be displayed by using raw data read from the serial port?

Hi there,
I am using an embedded camera to take photos. To operate it i send commands to it via the serial interface. I have received all of the image data back through the serial port and can view it as hex data in a string. The image data is 16bit colour RAW data at 160x120 resolution meaning i have 38400 bytes of data (160x120 = 19200. 19200*16 = 307200. 307200/8 = 38400). I want to be able to display this data as a picture, but cannot figure out how to do it. Can someone please point me in the right direction? i have been fiddling about with lots of the pixmap functions but no luck. Do i need to put this data in to a 2D array first?

Yes, first convert it into a 2D array of pixel values. From there you can convert it into an image to display it in a picture control.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can I control a HP 33120A waveform generator with the serial port of my PC?

Hello,
I want to control a HP 33120A waveform generator with my PC using the serial port. I don't have any idea about how to do it. If you've done it or if you know how I can do it, please give me some indications.
Thanks
Jean-Baptiste Paillet
PS: I don`t have G PIB port

The answer to your cross-post in the LabVIEW General group seems to be right on the money:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000032200000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Regards,
John Lum
National Instruments

I'm using 3G3 16gb and just upgraded to 4.3.3. Tried activating bluetooth to use Personal Hotspot for my laptop. But the iphone keep searching for devices thou my laptop can detect the phone. Does anyone know how to solve this?

I'm using 3G3 16gb and just upgraded to 4.3.3. Tried activating bluetooth to use Personal Hotspot for my laptop. But the iphone keep searching for devices thou my laptop can detect the phone. Does anyone know how to solve this?

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

How to detect if my external device is connected to the Serial port

Hi,
If I remove the cable from the serial port in my pc or either remove the serial cable from my external device, then when I send a request to open the serial port from my program, it basically does nothing, it just sits there.
I want to be able to show some sort of message or any other way of indicating to the user that they should check the cable.
below is the bit of code to open and set serial port params:
     public void openPort() {
          // Initialise the drivers
          System.setSecurityManager(null);
          String driverName = "com.sun.comm.Win32Driver";
          try {
               CommDriver commdriver = (CommDriver) Class.forName(driverName)
                         .newInstance();
               commdriver.initialize();
          } catch (Exception e2) {
               e2.printStackTrace();
          // port will be set in Store Operations.
          String wantedPortName = Configuration
                    .getParameter(ConfigSetting.EFT_COM_PORT);
          //System.out.println("wantedPortname : " + wantedPortName);
          Enumeration portIdentifiers = CommPortIdentifier.getPortIdentifiers();
          CommPortIdentifier portId = null; // will be set if port found
          while (portIdentifiers.hasMoreElements()) {
               System.out.println("counter");
               CommPortIdentifier pid = (CommPortIdentifier) portIdentifiers
                         .nextElement();
               System.out.println(pid.getName());
               if (pid.getPortType() == CommPortIdentifier.PORT_SERIAL
                         && pid.getName().equals(wantedPortName)) {
                    portId = pid;
                    System.out.println("found a macth");
                    break;
          } // end of while
          if (portId == null) {
               System.err.println("Could not find serial port " + wantedPortName);
               //System.exit(1);
          try {
               port = (SerialPort) portId.open("EFTDriver", // Name of the
                                                                           // application
                                                                           // asking for the
                                                                           // port
                         10000 // Wait max. 10 sec. to acquire port
          } catch (PortInUseException e) {
               e.printStackTrace();
               System.err.println("Port already in use: " + e);
               //System.exit(1);
          // Now we are granted exclusive access to the particular serial
          // port. We can configure it and obtain input and output streams.
          try {
                    port.setSerialPortParams(9600, SerialPort.DATABITS_8,
                         SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
          } catch (UnsupportedCommOperationException usc) {
               System.err.println("Unsupported operation" + usc);
          }Please advise what method can I use for this purpose.
Thanks
Abhi

You mean it hangs in the open() method despite the timeout?

How do I monitor serial port activity without first sending a command?

In my application I am sending a command through the serial interface and I want to monitor the response. The response is not instant, in fact it is a timeout response indicating the requested action did not work. How do I monitor so I can parse what is coming in over the serial port without necessarily sending a command?

You can always place a loop where you monitor the number of bytes at the serial port.
After configuring your VISA serial port session, you can create a Property Node to get the number of bytes available at serial port.
You can then process this information, for instance:
1. Establish a timeout because you never get a response.
2. Do serial port read if there is data available.
You can exit the loop with a timeout condition or having processed the data.
-JLV-

How can detect the serial port is active

Similar Messages

Maybe you are looking for