How can i add an ipad to my wifi connection?

I got a "new used" ipad from a friend. When I see my wifi id and click on it, it asks for a password. But when I type the password (six digits) that I use on my laptop, it doesn't recognize it. How do I add the ipad to my network?

The following has instructions and a link to further troubleshooting. The most likely problem is that you are using the wrong password -- that's a common problem because once you have connected a device such as your laptop the first time it typically auto connects every time after that and the password gets forgotten. iOS: Connecting to Wi-Fi

Similar Messages

  • How can I stop my ipad from dropping wifi connection?

    How can I stop my ipad from dropping wifi connection?

    Thanks for trying those steps out!
    Rtbeal, I would recommend that you contact AppleCare so they can run further tests and diagnostics to help you solve your solution better.
    If you can also access an Apple Store Genius Bar or Apple Authorized Service Center, that would be much better.
    Go to https://locate.apple.com/country for further support with your device!
    Thanks,
    KL

  • How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

  • HT3500 How can I add WPS (pin)  [for a WiFi capable CAMERA] to Time Capsuale WiFi

    Hi,
    How can I add WPS (pin)  [for a WiFi capable CAMERA] to Time Capsuale WiFi network?
    Regards

    I suggest that you use the Add Wireless Clients feature in AirPort Utility.
    Normally, this feature is used to add a wireless printer, but it will work with any wireless device.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Select the Time Capsule and click Manual Setup
    Click the Base Station tab at the very top of the screen
    Click Add Wireless Clients

  • How can i unlock my ipad when it show connect to itunes

    how can i unlock my ipad when it show connect to itunes

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • How can I add the iPad cover lock option to the iPad 2?

    The iPad cover lock option doesn't come up on my settings on my iPad 2. How can I add it?

    Hi Sven,
    You can't. GC does not support the monitoring of standalone HTTP server installs. Only HTTP servers which have been setup through an iAS install can be monitored.
    I have had a SR raised with Oracle regarding this and a enhancement request has now been raised, but how long this will take is anyone's guess.
    Regards
    Brian

  • HT4759 How can I sync my iPad to my wifi printer?

    How can I sync my iPad to my Canon wireless printer?

    Start by telling us which Canon printer you have.

  • How can I add an iPad app to my library without an iPad?

    Hello,
    As part of the App Store's 5th anniversary, the Traktor DJ app for iPad is free, possibly for a short time only. I currently don't have an iPod, but I would like to add the for-now-free iPad app to my library, just in case I later acquire an iPad. How can I do so?
    (I know that the Traktor DJ app for iPhone is available, but I want to secure ALSO the iPad version.)

    Download the app in the App Store in iTunes on your computer.
    Open iTunes on your computer, go to the iTunes Store, search for that app, and download it. If it can be synced to your iPod, it will be if you select it to sync. Otherwise, it will be on your computer until you can sync it to an iPad

  • When trying to register my ipad and put in my email address, a statement comes up stating the address is already verified for another apple id.  How can I add my ipad?

    When trying to register my ipad to mobile me by putting in my email address, a statement comes up stating the email address is already verified for another apple ID (which is me).  How can I still use this email for the ipad?

    Try here.
    Frequently Asked Questions About Apple ID
    and here.  Using an existing Apple ID with the iTunes Store and Mac App Store

  • How can I add an iPad to Apple Configurator without losing the user's settings, folders, etc?

    When attempting to add an iPad that has already been in use (for some time) by a particular user into Apple Configurator, I end up having to either wipe the iPad entirely as if it is a new iPad, or restore the user's settings and configuration from iCloud during mini-setup. It seems to be one choice or the other.
    Is there a way to add the "old" iPad into Apple Configurator for management purposes yet still be able to restore the user's settings from iCloud? That is - items like: folders, pictures, email settings, app data?

    nsdjoey wrote:
    theAntioch wrote:
    This isnt true. Connecting an unsupervised device to configurator and supervising it will wipe the device, there is no way around that. You can attempt an iCloud restore from here, but anything not backed up prior to supervising the device will be erased when supervising it. I have never tried to restore data from an unsupervised iPad so I have no clue if everything will come back.
    Let me clarify... You can successfully restore an iCloud backup of an unsupervised iPad to a new (i.e. different) iPad and have it Supervised with data intact. The process below will allow Configurator to Supervise a device without wiping it when an iCloud backup from a different unsupervised iPad is restored to it.
    Try it… Get 2 new unsupervised iPads… we'll call them iPad "A" and iPad "B." Take iPad "A" and install a few apps, take a few photos, change the background, create a new document in Pages, etc. Run an iCloud backup of iPad "A" using your Apple ID. This is our unsupervised backup of iPad "A."
    Now take new unsupervised iPad "B" and start running through the setup assistant. When you get to the restore screen, choose to restore from iCloud backup. Log in with your Apple ID. Select the backup for iPad "A." The backup will restore and then the iPad will restart. Once it restarts, you get to a "Hello" screen on the iPad. At this point, plug the iPad into your Configurator computer. On the Prepare screen, turn Supervision ON and select "Don't restore backup." Click Prepare.
    Configurator will not wipe the iPad. It will run through the supervision process but not wipe it. Once complete, you'll see that iPad "B" is now exactly the same as iPad "A", but if you go to Settings -> General -> Profiles on iPad "B" you will see a Supervision profile installed.
    The key here is to use a different iPad from the originally backed up iPad. You can't restore the backup of iPad "A" to iPad "A" again and supervise it without wiping it. But you can take the backup of unsupervised iPad "A" and restore it to iPad "B" and retain apps, data, and settings of iPad "A" but with the Supervision profile.
    Hope this clarifies things!
    ~Joe
    I see where your going with that. I dont have any way to reproduce this scenario in my environment, but I will take your word for it that this works. I have only ever plugged in an unsupervised device to configurator and gone through the setup, which always wipes the device. If your saying theres a way around that you should give that a shot OP.

  • How can I order a iPad 3 16gb wifi only?

    How can I order a white iPad 3 16gb wifi only??

    Not sure what the question is?  Go to the Apple website and order it?

  • How can I use my iPad mini 2 wifi only as gps in my car?

    can I blue tooth my iPhone 5C with iPad mini 2 wifi only and use my iPad as a gps in my car?

    Take a look at iOS: Understanding Personal Hotspot  Your cellular carrier needs to support this feature and may charge extra, on top of your normal data plan.

  • How can i use the ipad in uruguay wifi

    i can,t use my ipad in uruguay
    i bougth unlock in apple store in wayne but i cant use it why?

    WiFi is WiFi anywhere in the world. What network or networks have you tried to connect to?
    http://www.apple.com/support/ipad/assistant/wifi/
    iOS: Troubleshooting WiFi and network connections
    http://support.apple.com/kb/ts1398

  • How can I increase the speed of my wifi connection on my iPhone 4?

    Hey everybody. Okay, so long story short, my wifi speed on my iPhone 4 (Verizon) is pretty slow. So slow that I almost never turn it on because of the sluggish download speeds. However, I definitely want to have it on.
    I use the speedtest app, an my wifi at home (router in the next room) is clicking at:
    141ms ping
    0.72Mbps Down
    0.41Mbps Up.
    I'm seeing people on these forums post results like 9Mbps down, 5 up, etc. and I'm envious. How can I improve mine?
    Thanks in advance.

    There's nothing that can be done on the iPhone to affect the speeds via Wi-Fi, the iPhone simply is not the issue.
    What speed is the Internet service provided by your ISP?
    Is the wireless router you are connected to an 802.11b? g? or n? router?
    Both of these factors dramatically affect performance.
    Go to any Wi-Fi hotspot, you'll see a difference in speed.

  • How can i change the name of my wifi connection on my Airport express?

    The name of my wifi is Réseau de Francois with an accent on the letter E.
    Now, i have many conflict with other electronic components because they do not accept french accent.
    How can if change the name to reseau de francois without an accent on the letter E on my airport express 4th or 5th generation
    thanks

    airport utility in the utilities folder.

Maybe you are looking for

  • How can I speed up my sluggish MacBook Pro?

    I installed Mavericks last year and my MacBook Pro seems to be getting more and more sluggish, especially with the Adobe Creative Suite. Lately InDesign has been crashing on a regular basis. I used to be able to run several programs simultaneously, b

  • Problem with Text Messaging on new iphone with non iphone users

    Ever since I set up imessage forwarding to be able to send/receive text messages on both my mac book pro and iphone people with non iphones are not getting my text messages from either device.  In my settings - messages - text message forwarding it o

  • What's contents encrypt code of embedded image in IDML file?

    Hi guys, Does anyone has idea what's contents encrypt code of embedded image in IDML file? I want to use C# to get the binary data of contents and save it as image. But it seems to me it's not using Base64. How can i translate the contents to image?

  • How to color a particular row in a matrix

    Hi All, Using SBO, i am having two queries: 1. Is it possible to color single row, Cell in a matrix or a grid by any way. 2. And How to copy particular row from 1 matrix to another?. I want this by using drag n drop event of mouse. Only click and rig

  • Map viewer as client??

    I need to use map viewer as client-side application. Is it possible?