How can I change a blank value to a zero in a query?

When displaying key figures I am getting blanks as opposed to zeros (if there is no data in the cube). Does anyone know how to change the blanks to zeros?

Hi,
You can create a new Formula.
In the Formula editor write:
Formula = (Key Figure)+0
your blank cells will get 0 value
Regards,
MG.
Edited by: MG . on Jan 18, 2008 1:43 PM

Similar Messages

How can I add a blank value in a standard drop down list

Hello,
I have a requirement to add a blank value into the standard drop down list of for i.e. the search criteria
"created on" -> (values are: yesterday/today/last week etc).
The problem is, that this field has always the default value "yesterday" but our customer wants to have a blank field as default.
Can anybody provide me steps how can I add this blank value ?
Many thanks in advance

Hi Bernard,
thanks for your reply.
Its for quotation.
Could you give me still some further detail steps, please ?
Many thanks
Andreas

How can I change a hex value to normal without changing the characters

How can I change "3932" (hex displayed string) to "39 32" (normal displayed string with space)
Solved!
Go to Solution.
Attachments:
Hex to Normal without changing value.vi ‏5 KB

I think your VI works and if I understand what your input data looks like and the output that you want is, does it?I really can't see a better way. Does it not work for what you want? What form is the actual data in as you receive it? (not how it is displayed by the display setting of the string control) You have the string control set the “Hex display” and that may be confusing some of us as to what the actual input data is.
And what you want your output to look like. Do you get a “stream” of bytes that are the actual numbers in the form of a string?or Do you get a “string” of ASCII char that represent numbers?
These are two different things, but may look alike depending on the display setting of your controls are set.
Changing the display mode of a control or indicator does not change the under lying data. It only changes the way your eye “see” it, not how LabVIEW “sees” it. We need to know what your raw input string looks like.
tbob's snipit assume your data is one way and your VI assumes another.
Omar
Omar

Single open tab, Click "x" to close, browser defaults to a web page for my bank. How can I change to "blank" or some other page?

Have a single open tab. Regardless of the website active in that tab, if I close it (click "x"), FF shows my bank's homepage. I'd prefer not to display my bank homepage. How can I change to another page or, preferably, a "blank" page?
This happens regardless of the page current when I close the single tab and after I close and restart FF. Haven't tried rebooting computer.
Windows XP Home, Ver. 5.1, SP3.
FF 5.0.

Check the links below for options to remove the Adware.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

How can i change column header value dynamically in IR report

HI,
I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after that
I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.
Thanks in advance.
Regards
Narender B

Narender wrote:
HI,
I have created report with the help of collections. Report query has been changing dynamically but i got problem with report header names and headers names has not been changing dynamically it is always showing like c001,c002....etc so, i have created global item(G_ITEM) in shared components--->Applications items after thatWhy didn't you answer the questions in the other thread to see if there was a better approach than this?
I have created process(before headers) and assigning some value to G_ITEM and used &G_ITEM to column headres in IR Report but here &G_ITEM is not showing any value.
How can i achieve dynamic headers names by using *&G_ITEM(global items)* Please guide me to achieve this.The static text exact substitution method of referencing the value of an APEX item requires a terminating dot ("."):
&G_ITEM.

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

How can I change the default value in IT0009?

Right now in our system when we create a new IT0009 entry, several fields are defaulted such as the payee name, bank country, and currency (field WAERS). But in table T588Z I can not find anything defined for IT0009. Now even I create entries in T588Z ex. as
0009 WAERS 06 10 W P0009-WAERS='USDN'
the currency still shows up as 'USD' when I create a new record. Can anyone tell me where the field 'WAERS' is defaulted as 'USD' and how can I control this?
Thank you very much.
Best regards,
Johnson

Hi Johnson,
Correct me if I am wrong,You need to default a value, so i guees you would need to use the feature P0009 not the dynamic action. If you could let meknow the current structure of the p0009 feature, may b i could help you figure the could-be structure of the p0009 to default the required value.

How can I change the length value of all notes in a score, .e.g., double the length, or halve the length)?

I'd like to change the score of a composition so that the quarter notes are eighth notes, the half notes are quarter notes, the whole notes are half notes, etc. Is there a way to accomplish this uniformaly, all at once, in Logic Pro 9?

I am assuming that you have done a lot of work already on an Arrangement and now want to change the whole arrangement globaly. Here is how I would do it:
1 - Make sure your midi notes are all quantised and of uniform length whatever their note values. ( This applies especially if you have played the notes in in real time from a keyboard which is likely that they will be uneven - so quantize the lot before doing this. If you have 'written' or dragged the notes in Step Time then it is not so critical)
2 - Select all the regions and then grab the Right hand end while holding down OPTION and SHIFT - you will be able to drag all the regions to the same uniform length.
3 - Calculate the entire length of the regions you have already written and round them off to a set number of bars. Let's say for example the regions extend from bar 1 - to bar 16. You are going to reduce the regions to exactly half their length by OPTION dragging the regions smaller. That way you will get quarter notes halving to 8th notes. ( If it was the other way round you would OPTION drag the regions larger the other way)
Hope that helps
Best
MS

How can we change Prompt default values based on other prompts....

Hi Experts,
I have a prompt Status --> DAILY,WEEKLY and MONTHLY.
If user selects any one of this value the default value in another prompt Startdate and Enddateshould change,Here Startdate and Enddate is Editbox/calander control.
Declared the presentation variable in first prompt and in the second prompt of SQL Results(Default to) i am writing
+SELECT CASE WHEN '@{Pres}='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END+
but in the default one it was not showing the Repository variable value...
Please suggest me any solution its an urgent
thanks,
saichand.v

Hi Saichand,
Are you getting an error ("Error Generating Drop Down Values")? Or are you just seeing a blank default value?
If you are getting an error, do you have any presentation columns in your default SQL formula? If not, that's your problem. OBIEE won't let you construct a logical SQL query without having a presentation column in it somewhere.
If this is your issue, try the following: SELECT CASE WHEN 1=0 THEN <PRESENTATION_COLUMN> WHEN '@{Pres}'='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END FROM <SUBJECT_AREA>
Be sure to replace SUBJECT_AREA and PRESENTATION_COLUMN with appropriate names. The condition 1=0 will never evaluate to true, so it's as if it's not there, but OBIEE will see that there's a presentation column in the formula and stop giving you the error.
Good luck and if you found this post useful, please award points!
Best regards,
-Joe

How can I change iPhone MTU value?

Could anyone tell me how to change MTU value on the iPhone?
Thanks.

There is no setting to change MTU size in the iPhone.

How can i change button's value with another button?

You can see in file attach my problem.
I'm trying change value of button with another button and two button can be off to. But buttons aren't it.
Can you help me?
Thanks.
Attachments:
Twobuttons.vi ‏27 KB

Hola Carlos
No tengo muy claro lo que quieres, pero te envio un ejemplo usando eventos, en que los 2 controles pueden estar a off a la vez pero no a on.
Mira a ver si es lo que quieres. Usando eventos puedes hacer cualquiera logica.
Espero que te sirva
Saludos
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
Twobuttons.vi ‏31 KB

When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

Did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites
Other extension that have a similar feature:
*Speed Dial: https://addons.mozilla.org/firefox/addon/4810
*Fast Dial: https://addons.mozilla.org/firefox/addon/5721

How can I change the value used in a Criteria Rule in a Subscription agent

Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated' subscription agents, but it still does not appear possible to change and save the changes.
This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

Too old to care now.

How can we change some value in OSB at runtime as Preferences in BPEL

Hi all,
What is the approach we have to use in OSB to implement Preferences ( where i can change value at run time without deploying again ) like in BPEL.
Thanks
Phani

Thanks for the replay . I know they used for different purpose.i want to know how can we change anything in OSB at run time without redeploying the process again.
simple scenario :
Lets say i have a option in BPEL to change the Username/password if i set as Partner link parameters from BPEL Console . no need to redeploy the BPEL process .
if i invoke the same service from OSB how can change the username/password without redeploying the OSB project.
Thanks
Phani

How can I change a blank value to a zero in a query?

Similar Messages

Maybe you are looking for