How can I divide my page (in Photoshop) perfectly in to 4 or 5 sections?

How can I divide my page (in Photoshop) perfectly in to 4 or 5 sections?
I'm sure there is a better way to do it than to do maths and measure your screen..
Thank you~

It is a wee bit non intuitive. This will help get you started:
The bottom row of icons are
Center Horizontal; Center Vertical, Create Guides, Clear Guides (hold down to clear fields), create new set.
The size fields are the same as your units, so what I do is Right click a ruler and select what I want (Cms or Pixels).
Some combinations take some working out. This image is 800x600 pixels, so I have a 20 pixel margin all round. Four columns, with a 20 pixel gutter between the columns. GuideGuide just works it out and lays down the guides. How useful is that?!
Column width can trip you up if you don't think what you are doing. 100px into an 800 pixel wide image results in eight columns. If I had entered a value o 10, then I'd have had 80 vertical guides!. I am sure you'll have the entire picture from here.

Similar Messages

How can I divide a sheet to pages in numbers 3.0.1

How can I divide a sheet into pages. I have numbers 3.0.1

Hi m,
Numbers does not have (nor has it ever had) page breaks or Set Print Area.
Numbers 3 has lost Print View and Layout View, so it is rather clunky to swap between File > Print (to see Print Preview) and your document.
You can, however, move tables to new sheets and print only those sheets that are relevant. For example, your main data table could be on one sheet (that you choose to not print) and a summary table with perhaps a chart on another sheet (that you do print).
I hope this helps.
Regards,
Ian.
Message was edited by: Yellowbox. Changed 'Set Print View' to 'Set Print Area' to conform with Excel-Speak ;-)

How can I watermark 100 page documents without purchasing the full Photoshop program?

How can I watermark 100 page PDF documents without purchasing the whole Photoshop program for a MAC?

Surely you mean "the full Acrobat program". You can use the free trial version.

How can I divide a A4 size page into 4 equal parts ?

How can I divide a A4 size page into 4 equal parts, so that I can write individually on each part. that is 4 separated column : 2 columns on upper half of the page and 2 columns on lower half of the page. I only know how to create 2 column on a page but do not know how to create "2 rows', thank you

I would use text boxes but you could use Layout breaks and column breaks, but is more of a hassle. I am not a fan of a lot of text in tables.

How can I edit a droplet for Photoshop 6?

How can I edit a droplet for Photoshop 6? The company hired somebody to set up the droplet years ago, and nobody remembers how it was set up. The computer that was used to save the files has crashed, and I need to change the path the droplet uses for saving the files. I tried to open the droplet with Image Ready, but it said it was not an image ready droplet and could not be opened. The computer running Photoshop is using Windows XP.

It seems that the script on the ps scripts page is to old to work in cs5.
This is a lnk to xtools 1.8 which has the latest version of the droplet decompiler:
http://sourceforge.net/projects/ps-scripts/files/xtools/
Just unzip, find the Apps folder and look for the DropletDecompiler.jsx.
Then put your droplet on the desktop, Use File>Scripts>Browse in cs5 to navigate to the DropletDecompiler.jsx.
Here's an example using the Aged Photo.exe droplet from the ps 6 samples folder:
here's the resulting action opened in cs5:

How can I divide one big long track into several smaller ones?

I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
How can I divide one big long track into several smaller ones?
Any input would be great.

lakergrl wrote:
How do I split one very long track into several tracks (audio journal split into each day)
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

Can i divide the page size like 50%where two regions should appear

Hai..
Can i divide the page size like 50%where two regions should appear, and in another 50% one more reion should apper ...
how can i do that
Thanks
Anoo

Anoo,
Are you talking about two regions side-by-side? You could try applying "Reports Region 100% Width" report template on both regions, and making the 2nd region having Column 2. This way both will display side-by-side with 100% width.
Ittichai

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

How can I print a pages document in book format ..order?

How can I print a pages document in book format ..order?

This is usually a function of the driver you're using. Have you looked in the various PDEs for black and white or grayscale? What kind of printer are you using?

How can I print half pages to fit in my circa desk calendar

How can I print half pages from iCal to fit in my Circa desk calendar?

That depends on the program, but if it's Preview, go to Page Setup... under the File menu. Select the appropriate paper size there. Then go to File > Print... and do a Preview. If the content does not fit on the page, some printer drivers will have a Scale to Fit setting. If there is none, go back to Page Setup... and manually adjust the Scale until it fits nicely when you do a Preview.

How can i print specific pages against searched word or name (in one print command) from 1000 pages

how can i print specific pages against searched word or name (in one print command) from 1000 pages

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

How can i print only pages which have been highlighted, from a multi page file?

How can i print only pages which have been highlighted, in a multi page file.

Ah, I see want you mean. This might not be practical for you, but if you select one instance of the highlighted text and add a [space] to the little sticky note, all of the highlighted text on that page will appear in the summary.

How can I extract certain pages from my document and save as another file?

How can I extract certain pages from my document and save as another file?

You would need Adobe Acrobat to do that, not Adobe Reader.

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How can I divide my page (in Photoshop) perfectly in to 4 or 5 sections?

Similar Messages

Maybe you are looking for