How can I find the icon I need among the desktop clutter?

OK, my desktop accumulates a lot of icons, and then it's hard to find the one I need.
I'd like to click on the file name in a window and make the icon obvious, like blink or highlight.
I haven't found anything as part of OSX or Finder, or on Google.
Maybe there's an application that can do this?

You should not clutter up your Desktop with icons!
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks'.

Similar Messages

  • Trial version. Today I have downloaded the program with the serial number, now I'm doing the istallation he asks me the serial number, I put it and he tells me that I need also the serial number of the previous version. How can I find the serial number of

    1 month ago I Downloaded a trial version. Today I have downloaded the program with the serial number, now I'm doing the istallation he asks me the serial number, I put it and he tells me that I need also the serial number of the previous version. How can I find the serial number of the trial version?

    What program, and did you buy the UPGRADE version, or the FULL version?
    Your description indicates that you bought an upgrade version... which requires proof of a previous version to install
    So, if you had A and you bought A+ you need to provide your A serial number during install so A+ knows you are legal

  • How can I find the location of an app on my iPad 2?

    How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could  find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually  are).

    You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

  • How can i find the installed forms version in 6i...?

    Dear all,
    How can i find the installed forms version in 6i, the situation is we have given a solution which will work in only forms6i latest version, before implementing the same we need to check whether the forms latest version has been installed or not
    Is there any way to find out without opening the forms builder..?
    Even if we un install the forms from a machine, the forms60_path variable will remain in regedit, so we cannot go based on that and aslo i dont know whether regedit will have the version details and all.
    It would be greatly appreciated if any one can give a solution.
    Thanks in Advance.
    Thangaraj.

    you query the registry, the registry has the version number saved, but I cannot remember exactly where and I don't have 6i Installed on my machine.
    You just open the Forms Builder and click on Help/About.
    But Jan's method is the best.

  • If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

    if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
    They are not listed as devices on the itunes store account...

    Hi BradSLane,
    Thanks for using Apple Support Communities.  This article has one method to find your serial number:
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    Go to My Support Profile*.
    Sign in with your Apple ID.
    View your purchases in "My Products".
    * Currently available only in certain languages.
    Note: If you need help remembering your Apple ID(s), go here.
    Take care,
    - Ari

  • How can I find the detailed package message in jdev9i

    Usually in jdev9i we need the detailed interface,class message in package ,espically when it has something to do with oracle specialization. how can i find the exact message I need?

    sung:
    I mean the java doc. Langyun:
    Follow these steps:
    1. In JDev IDE's editor window, either type in or find the class whose JavaDoc you want to see. For example, you can go to the towards the top of a .java file and type "import oracle.jbo.Row;".
    2. Then, click on that String ("Row") and right-mouse click. You should see a menu item named "Browse JavaDoc". Select that menu.
    From there, you can go to the package level JavaDoc.
    Thanks.
    Sung

  • HT201240 how can I find the su - root password on my mac?

    how can I find the su - root password on my mac?

    Chances are you could have also done
    sudo su -
    which would now make you 'root' until you exit.  You could do all your setup running as root.
    Very few if anything actually needs the root password to use root privileges, and having a system where root cannot be directly logged into, is a safer system.

  • How can I find the all path available for a MPLS VPN in SP network

    How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

    Hi There
    If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR  the below vrf specific command
    sh ip bgp vpnv4 vrf "vrf_name"  will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
    However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the  trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
    If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
    RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
    So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
    Hope this helps you a bit on your requirement
    Thanks & Regards
    Vaibhava Varma

  • How can I find the procedures where I use a table?

    How can I find the procedures where I use a table?
    I need to look for it in all the users.

    select name,owner from dba_dependencies where referenced_name='table_name'
    and referenced_owner = 'schema'
    and type = 'PROCEDURE'
    Aravind

  • How can I find out if I need a BIOS update?

    I have a Yoga 2 Pro. How can I find out if I need to update the BIOS?
    Solved!
    Go to Solution.

    If it ain't broken, don't fix it. This is expecially true with the BIOS.
    Unless you are trying to fix a particular issue and you believe a new BIOS will help, don't touch it. The BIOS is one thing that can brick a computer should something go wrong during the flashing process.

  • How can I find the USer Exit...

    Hi,
    How can I find the USer Exit...
    I need to do changes for this User Exit :EXIT_SAPLKEII_002
    In which T-code I can open this Exit
    Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
    ...any sugesstions will be apprecaited!
    Thanks & Regards,
    Kittu

    Hi,
        the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
    Regards,
    Vijaya Lakshmi.T

  • How can I find the currency field of table KOMU

    I need to select data from table KOMU, including field wrbtr. in 'Currency/Quantity Fields' tab, it's defined to use bkpf-waers.
    but how can i find the corresponding record in bkpf? could anyone tell me the relation between these two table?
    or is there another way to get the currency field?
    thank you!

    Hi,
    In that case, please retrieve the currency & store it in variable. Pass the variables to the Function Module.
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
         EXPORTING
              date             = syst-datum
              foreign_amount   = for_amount
              foreign_currency = L_cur1
              local_currency   =  l_cur2
         IMPORTING
              local_amount     = loc_ammount
         EXCEPTIONS
              no_rate_found    = 1
              overflow         = 2
              no_factors_found = 3
              no_spread_found  = 4
              derived_2_times  = 5.
    [Code]
    Best regards,
    Prashant
    [code]

  • How can I find the reference field of components ?

    Hi everyone ;
    I am a Junior Abap Developer. I am  creating a structure that I will use in the report program. When I create a structure , some of the components needs to get reference field.Ex: NETWR,BTGEW,KWMENG.  How can i find the reference field of component?

    Hi,
    You have to put entries for currencies and quantity fields for these fields,
    Like for NETWR reference table is VBAK and field is WAERK,
    for other Quantity field you can use MEINS as reference field.
    You can check the reference table and reference fields in the respective tables( i.e. VBAP here).
    Thanks,
    Anmol.

  • How can i find the year/specs of a laptop?

    I am planning on purchasing a macbook from a local shop and they say it is slightly used but are giving it to me for a substantially low price. They said they will allow me to check it out and see if i want to buy it or not. How can i find the year of purchase and specs of the laptop quickly and through simple use at the store to decided if i want to make the purchase? also, how can i judge if a mac is fully functioning in a short period of time? sorry for my lack of knowledge as i have only ever owned a pc

    When examining the laptop, boot it up, click the Apple menu, and click "About This Mac." It will tell you the CPU and RAM. Click the More Info button for the full System Information listing of all hardware and software.
    The System Information Hardware Overview section will list the exact model like this:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
    You can look up the Model Identifier to determine the year of release and more specs. I have the MacTracker app on my iPhone which has a complete database of all Macs ever made, so I look it up there.
    On the desktop, if you select the hard disk icon and choose Get Info you will get a readout of the disk capacity and how much is used/free.
    It's hard to know if a Mac has a hidden problem, after only a few minutes of examination. You will have to wing it or ask for some kind of warranty.

  • How can I find the table of

    How can I find the table of the structure fields?
    A structures table?
    for example the table of sap standard structure diaprd or diadrp, I do not remember now?
    Thanks.

    The hard way....
    Go to SE11
    Enter the structure
    Position the cursor on the field
    Press Where-Used List
    Check all related table to see which one fulfill your needs
    Greetings,
    Blag.

  • Moving adobe 9 standard from 1 machine to another. How can I find the activation code on the old machine to activate on new machine

    moving adobe 9 standard from 1 machine to another. How can I find the activation code on the old machine to activate on new machine?

    You didn't really clarify much, just repeated the same question. First of all, Adobe is a company with many products.
    Are you talking about Adobe Acrobat? If so you need to deactivate it on the old machine and then use enter the serial-number (as described) when installing it on the new machine. It will then activate itself automatically over the internet. Just keep in mind that Acrobat 9 is not compatible with Windows 8 and to make it compatible with Windows 7 you have to update it to at least version 9.2 after the installation.

Maybe you are looking for

  • Audio Configuration not compatible with iTunes?

    A problem has come up with my iTunes and whenever I try to open it, it says that there has a problem with my audio configuration. Some help?

  • Capturing errors

    Hi All, How to capture the errors  when Transaction SM50 is executed and how to put its details it into an internal table?

  • Publish PLSQL stored procedure as web services

    Is it true that PLSQL stored procedure can only be published as web services using JAVA? I came across article that mention how to call other web services from within plsql, but not sure the vice versa. So, please advise. Thank you.

  • Configurating my Logitec (non-Apple) keyboard

    Hi I have an on-going issue where the following keyboard keys have been swapped around; @ and " I know from my PC experience that this is usually rectifed (on the PC anyway) by changing from US to UK layout. I have double checked my Mac setup and hav

  • '06: Pages app.: How to switch columns within Classic Brochure?

    Working on a brochure as a personal project. Realized this is what "Pages" (part of iWork '06) is for as giving it a try. Decided on the template provided under Marketing -> and have chosen the "Classic Brochure". It's very cool and easy to use! Howe