How can I format an SD card on my mac? I have tried the erase thing but when I put the card into my 35mm camera it says that the card has to be formatted.
I just purchased two new SanDisk 8gb SD cards for my trail cameras. When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards. When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted. I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them?? I have tried this for hours and have had no luck getting these things to work at all. It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty. When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing. I don't understand what is going on and could sure use some help with this. Thanks for any information anyone can give me with this problem. I would love to have seen what animals set my cameras off 75 times in the last few days. Thanks again.
Respectully
Jim
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.
Similar Messages
-
I've tried to uninstall iTunes to start over again and it won't let me, and have also gone through the step-by-step guides on Apple Support.
What's the precise text of the error message, please? (There's a few different ones I can think of that you might be getting.)
-
I am trying to add an itunes card to my ipod and it keeps asking me to sign in. i sign in and it keeps popping up the same thing for me to sign in. i need help please.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Store and sign out and sign back in
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings -
I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/
By converting the WMA files to AAC formatted files.
-
I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?
Supported file formats for iOS Pages
Import:
Pages ’09 for Mac
Microsoft Word - Office Open XML (.docx) and Office 97 or later (.doc)
Plain Text files (.txt)
Export:
Pages ’09 for Mac
Microsoft Word (.doc)
PDF
As you can see - .rtf is not supported. -
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?
Hi
Turn off analyze/image stabilization.
Yours Bengt W -
When i enter my apple id , a massagd appears and says that the maximum apple id use in this iphone, how i can enter my apple id on this?
If you are entering an Apple ID in Settings>iCloud which has not yet been used to create an iCloud account then the phone will attempt create a new account.
However the maximum number of iCloud accounts that any one device can create is limited to three - this is tied to the hardware and can't be bypassed. If you've already somehow created three iCloud accounts then you would have to create a new one on another Mac ior iOS device, and then you could sign into it on this phone. -
i bought a iphone froma friend just to use for a ipod but when i put it up to itunes it ask me for a sim card i dont have one and i was wonderiing how do i pass this problem
Insert a SIM card. If the phone is carrier locked, it must be from the correct carrier. You MUST have a SIM card present to activate the device. The SIM does NOT have to be "live". That is to say, the account it is/was tied to, does not have to be active.
-
When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !
You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
Is this ADSL?
Do you have the modem in bridge?
How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported. -
I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.
-
My hard drive crashed and I lost everything on my Mac desk top, including my Adobe Lightroom. I had my hard drive replaced but how do I download to my new hard drive? I have my previous serial number but when I entered that, it said it was invalid.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Contact Adobe Support by chat for serial number issues:
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .
Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried to replug the usb msg show up by saying usb not compaitnle. With this mac and take me to disk utility and thanks for replying
-
I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
Maybe you are looking for
-
Variant Configuration Issue - Urgent
Hi PP Gurus, Can you help me for the following issue: I have a material variant (with 60% std items) and the remaining 40% of items , I want to add at the time of sales order creation. But it is not allowing me to add , since it is showing in dis
-
Import wants to import too many photos
My iPhoto Library contains 6611 photos. I'm attempting to import that same library into a new library in /Users/Shared in which I plan to combine my photos with those in my wife's iPhoto Library. There seems to be an issue with import. When I try to
-
Premiere timeline printing (for animation x-sheet use)
I have used a very old version of adobe premiere (premiere 5 windows) to print timeline pdfs of pix icon and waveform of animatic quicktimes. I would add anotations to these in acrobat for specific animation timing direction ( as replacement for trad
-
Automatic generation of ABAP-classes from Function Groups?
Hey there, is there a way of having (SE24)-ABAP-Classes generatetd outomaticaly by providing an existing function group? I think, the following mapping shold be possible:: - the function group is the class - its function modules are public (static) m
-
Hi to all! I recently upgraded from Aperture 2 to 3, and everything went smooth so far. At the moment I only have a minor question: I'm trying to figure out how I can set that the labeling in the browser in the way that I see only the file name and t