How can I load the foxstar all in one page

'''bold text'''
Dear Sir/Madam
I bee to try to load the uk foxstar but I can not fine how to load can you help please because soon I inter the name it gos direct to open the web page before load.

Sorry I forgot that I had change the code:
DataSource ds=(DataSource)pageContext.getAttribute(Action.DATA_SOURCE_KEY);
     conn=ds.getConnection();
          stm=conn.createStatement();
          rs=stm.executeQuery(insertsql);
to the code:
DataSource ds=(DataSource)pageContext.getAttribute("mydatasource");
     conn=ds.getConnection();
          stm=conn.createStatement();
          rs=stm.executeQuery(insertsql);
mydatasource is the struts datasource in "struts-config.xml". I couldn't work

Similar Messages

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

How can I update the firmware all at once

I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
http://help.apple.com/configurator/mac/1.4.1/

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

How can I see the entire "title" of a page (now truncated)?

I see that Firefox is now truncating the "title" of web pages. I cannot see any good reason for this because the space to the right of the title is blank. I think it was done in the "do anything to make changes to Firefox" department but in this case it is not an improvement and provides the user with less information.
How can I fix the browser so I can again see the entire "title" as provided by the web page designer? I don't want to take extra steps (if any) to see it. I want it to display automatically each time.

That is on the tab. A tab has a maximum width because otherwise a long title would cover the full tab width.
You can make the Windows title bar visible again in the open the customize window via the 3-bar Firefox menu button (Customize is at the bottom left). 
There you will find the choice to have the title bar visible.

How can I duplicate the same table in 3 pages?

hi everybody!
i have a form with a master page (containing the invoice fields) and 3 body pages that reference the master page.
in each one of these 3 pages there is a table with one header row, 7 body rows and a footer row.
the table was copied and pasted from page 1 to page 2 and page 3.
between the body rows there are two rows that are bound with table data, one for invoice details and one for tax details.
my problem is that in the 2nd and 3rd page in pdf output invoice and tax details are empty, while the other lines are present.
it seems like there is a table index that loops once in the first page until it reaches the end of the table, so for page 2 and 3 it is already at the end...
my question is: how can i get the same complete table in three form pages?
thanks in advance

Not sure I follow .....are you asking for Page 2 and 3 to have the same table and values in the table as on Page1 or does each page have unique data?
Where is the data coming from? Is the user typing it in or is there a separate data source somewhere?
Paul

How can I load the selected XML File (Selected from a Listview) into the correct Textboxes?

Right, so I have a windowsform with lots of Textboxes, where the user can type in Information, and then hit "Save", once its saved it goes into a sortof XML Format
<?xml version="1.0" encoding="utf-8"?>

<Case>
<Person>l<Driver></Driver><License-Holder></License-Holder><Address></Address><Phone></Phone><Date-of-Birth></Date-of-Birth><Registration></Registration>
Like that.
Now, on my Startup Form (The main form) there is a Listview that I gave the name Objectlist1. This list displays ANY file located in a specific folder on my computer. This is also where the Saved files appear.
The list also updates every 5th second so after you save it appears quickly.
Now, the Files are saved using the content or Value of the first Textbox:
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Firsttextbox.Text, settings)
So it appears in the folder and on the list with the value inserted in the first Textbox.
My problem comes when I want to load this back (Or reverse the function if you will)
Where I can go to the Objectlist1/Listview, either doubleclick a file or Mark a file, and hit my button "Retrieve"
I want the Form where you could input all the values to show - which it does
And the information from the XML/File saved to appear where it once was typed or inserted.
Here is an example of the code used to save the values from the Textboxes;
Private Sub Savebutton_Click(sender As Object, e As EventArgs) Handles Savebutton.Click
If IO.File.Exists(Pholderbox.Text) = False Then
Dim settings As New XmlWriterSettings()
settings.Indent = True
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Pholderbox.Text, settings)
With XmlWrt
' Write the Xml declaration.
.WriteStartDocument()
' CLIENT
' Write a comment.
.WriteComment("Database")
' Write the root element.
.WriteStartElement("Case")
' Start our first person.
.WriteStartElement("Person")
.WriteString(Textbox1.Text)
' The person nodes.
.WriteStartElement("Driver")
.WriteString(Textbox2.Text)
.WriteEndElement()
I've tried multiple codesamples but they all give either "XML Not found" or such Overloads.
This is the current code I used when trying to make it work
Private Function ReadSettingsXML(ByVal path As String) As MySettings # On Debug It marks here and tells me it wasn't found.
Dim thisSettingsInfo As New MySettings
If My.Computer.FileSystem.FileExists(Objectlist1.SelectedItems.ToString) Then
Dim settingsInfo = XElement.Load(Objectlist1.SelectedItems.ToString)
If settingsInfo IsNot Nothing Then
For Each mainGroup As XElement In settingsInfo.Elements
If mainGroup.Name = "<Database>" AndAlso mainGroup.HasElements Then
For Each subGroup As XElement In mainGroup.Elements
If subGroup.Name = "<Person>" Then
thisSettingsInfo.Textbox1 = subGroup.Value
ElseIf subGroup.Name = "<Driver>" Then
thisSettingsInfo.Textbox2 = subGroup.Value
ElseIf subGroup.Name = "<Address>" Then
thisSettingsInfo.Textbox3 = subGroup.Value
End If
Next
End If
Next
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file is corrupt and cannot be read.")
End If
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file could not be located.")
End If
Return thisSettingsInfo
End Function
Private Sub LoadXML_Click(sender As Object, e As EventArgs) Handles LoadXML.Click
Dim settings As New MySettings
settings = ReadSettingsXML(Objectlist1.SelectedItems.ToString)
If settings IsNot Nothing Then
Dim sb As New System.Text.StringBuilder
With settings
Caseworker.Textbox1.Text = .Person
Caseworker.Textbox2.Text = .Driver
Caseworker.Textbox3.Text = .Address
End With
End If
End Sub
Also, the "Caseworker" is the form where all the textboxes are located.
Been stuck on this for two working days, so any help is highly appreciated
Codesamples are also highly welcome so I can see what the heck you did and find and answer to my problems.

I found a code that might be close to what I'm looking, but as of this code used here, it looks for a static document that already exist and is located in the code.
See this one here, checks for the XML file, and since I can't link one program to 1 file, when its gonna have and use 100's of files.
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
While (document.Read())
Dim type = document.NodeType
'if node type was element
If (type = XmlNodeType.Element) Then
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
End If
End If
End While
Am I at least close here, people?
Can anyone help with the now critical issue I got?
I basically need to change these two;
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
To whatever value, so they read from the file SELECTED in my Listview
Cos the program saves files according to the info inserted in textboxes, so it can have whatever name you can think of, I need the program to "find and load" that file, once its selected, and then once I hit Retrieve or LOAD or whatever button, it
injects the info from the File to the correct Textboxes.
And I think this will work to get the info in the right boxes;
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
Any good advise? I'm stranded here.

How can I cancel the "Recreate All Virtual Dekstops" for a pooled collection in 2012 R2?

I currently have a system single-server installation of VDI, using 2012 R2 Standard as the server, using pooled collections of Windows 8.1. In general, everything works very well, but I've been searching in vain for ONE command. When
I make a change to the master template in Hyper-V, Checkpoint it, then go into the Remote Desktop Services, go the appropriate collection and initiate a "Recreate All Virtual Desktops", how would I cancel that?
It's happened on more than one occasion, where I make a change or an update to the template, and then push out the 25 new Virtual Desktops, and then the client comes back asking for a "little" change....but I'm stuck pushing it out until
all 25 desktops have been recreated. There must be a way to interrupt this process (probably leaving a few VM Desktops in an unstable state...which I don't care too much about as it's a pooled collection), update the template, and push it out again with
the "Recreate All Virtual Desktops". I do have the concurrency set so it recreates 5 at a time, but that noticeably impacts the users, and I don't want to just push out all 25 at a pop and interrupt everyone's work. Any ideas?
J

Hi,
Have you tried Stop-RDVirtualDesktopCollectionJob ? Something like below:
Import-Module RemoteDesktop
Stop-RDVirtualDesktopCollectionJob -CollectionName "PooledCollectionName" -ConnectionBroker "broker.yourdomain.com"
-TP

How can I load the data of Manager Beans into an Array?

Hi all!
I have a problem when use the ADF model layer (JDeveloper 10g). I want to load the data of a Manager Bean into Array(such as: Array in JavaScript).But I don't know any ways to do.
Are there any ways to do that?
Please, help me!
Thanks so much!

Hi,
there is a fundamental difference between an array in Java and an array in JavaScript as the latter is added to the output page while the first sits in a Java class on the server.
Populating a Java array from a managed bean is straight froward: Just create the Array, loop through the source of the data - ADF binding or the ADF Faces table component - and fill it.
For a JavaScript Array I would suggest to write the array into a js file and reference it from the web page (which might cause concurrency issues).
Frank

How can i load the device driver for my ipod nano 7th generation

When I plug in my ipod nano 7th generation (for the first time), I am getting a message about "unknown device" and "driver not installed properly". Can I manually load the device driver some other way?

Hi there Jen292,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

I just bought the Apple iPhone 5 via Verizon. Great phone but there is no "Contacts" icon on my phone. How can I load the contacts icon/app?

I just bought the iPhone 5 and find there is no "Contacts" icon displayed. How do I find the icon or do I need to download an app? Most of all I am curious as to why the icon is no

Thank you! It was in the Utilities Folder and I was able to move it to the home screen. Thank you so much for your help. I'm an old dude (64) and still learning my way around my beautiful Apple products (MacBook, iPad 2, and now the new iPhone 5). This is great ****! LOL!
Again, thank you for your help.
Don

I have OSX 10.8.5 and cannot install Flash Player 17. On two computers, I get an "install Adobe Flash Player quit unexpectedly" error. Many websites no longer work. How can I load the new flash player??

Can anyone help?

Hi howardc94036148,
Can you Please attach a screenshot (How to post a screenshot in the forum ) and explain how you are installing flash player on you system and how did you download the flash player installer?
In the meanwhile you can you try Uninstalling any remain of Flash Player on your system using - Uninstall Flash Player | Mac OS and Re-installing using - Installation problems | Flash Player | Mac - NPAPI for Safari or Firefox and PPAPI for Opera or Opera Dev.
Let us know if this helps.
Piyush

How can you specify the height of an index page window?

I want to control the height of an index page window when it
loads.
If you look at this page;
http://www.farrowdesign.com/
It has a fixed size onload.
I'm trying to do a basic web page for a friend using
dreamweaver.
see here
http://www.landscapesbyjonstollar.com/
It's a series of horizontal landscape images which are all of
the same height - I want the user to scroll to the right to view
them usiing their browsers scroll bar.
Can anyone clearly explain (I'm very new to this) how I might
do this and if it's javascript - where I should paste the code.
Thanks in advance
Jim

"<td width="853" <img src="images/Stollar_01.jpg"
width="853" height="642"
/></td> "
You can't be serious....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mbarizia" <[email protected]> wrote in
message
news:[email protected]...
>
>
> ok.. it's easy : in dream weaver replace those lines :
>
> <td width="853" <img src="images/Stollar_01.jpg"
width="853" height="642"
> /></td>
> <td width="864"><img
src="images/Stollar_03.jpg" width="864"
> height="642"
> /></td>
> <td width="732"><img
src="images/Stollar_05.jpg" width="732"
> height="642"
> /></td>
> <td width="862"><img
src="images/Stollar_07.jpg" width="862"
> height="642"
> /></td>
> <td width="857"><img
src="images/Stollar_09.jpg" width="857"
> height="642"
> /></td>
> <td width="968"><img
src="images/Stollar_11.jpg" width="968"
> height="642"
> /></td>
> <td width="487"><img
src="images/Stollar_13.jpg" width="487"
> height="642"
> /></td>
> <td width="545"><img
src="images/Stollar_15.jpg" width="545"
> height="642"
> /></td>
> <td width="901"><img
src="images/Stollar_17.jpg" width="901"
> height="642"
> /></td>
>
> By :
>
> <td width="853" <img src="images/Stollar_01.jpg"
width="853" height="642"
> /></td> 
> <td width="864"><img
src="images/Stollar_03.jpg" width="864"
> height="642"
> /></td> 
> <td width="732"><img
src="images/Stollar_05.jpg" width="732"
> height="642"
> /></td> 
> <td width="862"><img
src="images/Stollar_07.jpg" width="862"
> height="642"
> /></td> 
> <td width="857"><img
src="images/Stollar_09.jpg" width="857"
> height="642"
> /></td> 
> <td width="968"><img
src="images/Stollar_11.jpg" width="968"
> height="642"
> /></td> 
> <td width="487"><img
src="images/Stollar_13.jpg" width="487"
> height="642"
> /></td> 
> <td width="545"><img
src="images/Stollar_15.jpg" width="545"
> height="642"
> /></td> 
> <td width="901"><img
src="images/Stollar_17.jpg" width="901"
> height="642"
> /></td> 
>
> any help : [email protected] ;)
>

How can I put seperate score files onto one page in the Layout?

I have written some exercises in different keys. They are small files. Each of them are saved individually and cover only part of a page each but I want to lay them out on one single page. I can't work out how. Each file is in a different key. As a short term solution I tried to combine them into one file and then could not work out how to change the key signature. When I insert the #'s and b's the following notes don't move to the right. So that does not work the way I do it. Does someone have a solution, please?
Cheers,
ansu

Thank You, musicspirit, for your support. What you suggested I had done already, but it did not work always only sometimes. ( Like a disfunctional light switch). Maybe I missed some setting or whatever or tried too many things...or..Anyway quite a few things didn't work, I spare you the details. Meanwhile I did disk maintenance and tossed out the files and started again from scratch ( which I wanted to avoid) and everything worked out fine so far. No problems with clef change, etc.
But to make it look as if I had three songs or three separate exercises on one page I need to create a bigger space between the 3rd and 4th staves and the 6th and 7th staves. I can do this only globally, which means I manage only to increase the space between all the staves. (I hope I am not asking the wrong thing again. Manuals are not always easy for the novice.)

How can I keep the cookie history for one website while not allowing it for others?

My privacy setting is set to clear history, cookies, etc whenever I close out of Firefox. As a result, one website I use frequently re-asks security questions after I log-in even though I tell it that it should remember and recognize my private computer. According to the web tech support, it is because my cookies are being deleted. She said in Windows Vista, she found a way around that. I have Windows 7, but have not figured it out yet.
I would like to be able to specify which websites I want to be able to keep cookies for my computer. How do I do that?

Let all cookies expire when you close Firefox.
* Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
Make an Allow exception for the ones that you want to keep.
* Tools > Options > Privacy > Cookies: "Exceptions"
You can inspect and modify the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
Tools > Options > Privacy > Firefox will: "Use custom settings for history"

How can I load the foxstar all in one page

Similar Messages

Maybe you are looking for